2,053 Results Found

The preparation of membranes from polymer solutions by the phase inversion method, the immersion—precipitation technique has proved since the beginning of obtaining technological membranes the most versatile and simple possibility to create pol...

Emulsions stabilized by solid nanoparticles, referred to as Pickering emulsions, are becoming increasingly important in applications as they are free of surfactants. However, the bulk properties and stability of Pickering emulsions are far from being...

Waterborne polyurethane asphalt emulsion (WPUA) is an environmentally friendly bituminous material, whose performance is highly dependent on the phase structure of the continuous phase. In this paper, WPUAs in the vicinity of phase inversion were pre...

Stimuli-sensitive (in situ) drug delivery systems are a dynamically developing area of pharmaceutical research. Over the past decade, the number of studies on such systems has doubled. Among these, phase-inversion (or phase-sensitive) formulations, w...

This study presents the first quantitative comparison of catastrophic phase inversion behavior of water-in-oil emulsions stabilized by nanocrystalline cellulose (NCC) and molecular surfactants with different headgroup charge types: anionic (sodium do...

Reversible emulsification drilling fluids can achieve conversion between oil-based drilling fluids and water-based drilling fluids at different stages of drilling and completion, combining the advantages of both to achieve the desired drilling and co...

Pickering emulsions have emerged as promising multiphase systems owing to their high stability and diverse applications in materials and chemical engineering. However, achieving precise and stimuli-responsive regulation of emulsion type, particularly...

When a transformer operates under three-phase unbalanced conditions, the location of the winding hot-spot temperature (HST) is no longer fixed on a certain phase. Taking an S13-M-100 kVA/10 kV transformer as the research object, this paper proposes a...

Long-time exposure to volatile organic compounds (VOCs) in the atmosphere can have negative health effects on humans and other living organisms. In order to purify ambient air, these VOCs can be degraded using photocatalysis. In this research, commer...

Elastic full waveform inversion (EFWI) is a crucial technique for retrieving high-resolution multi-parameter information. However, the lack of low-frequency components in seismic data may induce severe cycle-skipping phenomena in elastic full wavefor...

Elastic full waveform inversion (EFWI) is essential for obtaining high-resolution multi-parameter models. However, the conventional EFWI may suffer from severe cycle skipping without the low-frequency components in elastic seismic data. To solve this...

Power inversion (PI) is a known adaptive beamforming algorithm that is widely used in wireless communication systems for anti-jamming purposes. The PI algorithm is typically implemented in a digital domain, which requires the radio-frequency signals...

The effects of emulsification variables, such as surfactant type and heating/cooling emulsion processes, on the emulsification characteristics of silicone oil’s emulsions prepared by the phase inversion temperature method were investigated in t...

The effects of unmodified and modified bentonite nanoclays (with various degrees of surfactant modification) on the catastrophic phase inversion from water-in-oil (W/O) emulsion to oil-in-water (O/W) emulsion were determined experimentally. The bento...

Emulsions stabilized by environmentally friendly surfactants have been at the center of research attention over recent decades. Non-ionic surfactants with good biodegradability, while being non-toxic and non-irritating, have dominated in this area. F...

Membrane technology is an essential tool for water treatment and biomedical applications. Despite their extensive use in these fields, polymeric-based membranes still face several challenges, including instability, low mechanical strength, and propen...

In this study, micron-sized pored membranes, based on the co-polymer polyvinylidene difluoride hexafluoropropylene (PVdF-HFP) were prepared via phase inversion techniques. The aim of the approach was to find less harmful and less toxic solvents to fa...

A wet phase inversion process of polyamic acid (PAA) allowed fabrication of a porous membrane of polyimide (PI) with the combination of a low dielectric constant (1.7) and reasonable mechanical properties (Tensile strain: 8.04%, toughness: 3.4 MJ/m³...

Due to the high value of its dielectric constant, polyimide does not meet the requirements of the development of integrated circuits and high-frequency printed circuits. The development of novel low dielectric constant polyimide materials for the pre...

Polyacrylonitrile (PAN) is a popular polymer that can be made into membranes using various techniques, such as electrospinning and phase inversion. Electrospinning is a novel technique that produces nonwoven nanofiber-based membranes with highly tuna...

The starting point for the preparation of polymeric membranes by phase inversion is having a thermodynamically stable solution. Ternary diagrams for the polymer, solvent, and non-solvent can predict this stability by identifying the phase separation...

Pickering emulsions stabilized by the interaction of palmitic acid (PA) and silica nanoparticles (SiNPs) at the water/oil interface have been studied using different alkane oil phases. The interaction of palmitic acid and SiNPs has a strong synergist...

Microbial transformation of hydrophobic phytosterols into the pharmaceutical steroid precursors AD (androst-4-ene-3, 17-dione) and ADD (androst-4-diene-3, 17-dione) in a water–plant oil two-phase system by Mycolicibacterium neoaurum is a paradi...

The engine performance and emission characteristics of burning emulsions of soybean oil biodiesel in a compression-ignition diesel engine prepared through the phase inversion temperature method were compared with those of neat soybean oil biodiesel a...

Formulating low-solubility or low-permeability drugs is a challenge, particularly with the low administration volumes required in intranasal drug delivery. Nanoemulsions (NE) can solve both issues, but their production and physical stability can be c...

In seeking alternatives for reducing environmental damage, fabricating filtration membranes using biopolymers derived from agro-industrial residues, such as cellulose acetate (CA), partially dissolved with green solvents, represents an economical and...

Antimicrobial composite membranes, formed by cellulose acetate loaded with AgNO₃ particles, were produced by supercritical phase inversion. Different cellulose acetate concentrations were tested (15%, 20%, 30%(w/w)), whereas the active agent (i.e., s...

Thin-film membrane layers coated onto porous supports is widely considered as an efficient way to obtain high-performance oxygen transport membranes with both good permeability and high mechanical strength. However, conventional preparation methods o...

Polyvinylidene fluoride (PVDF) membranes are extensively utilized in membrane distillation (MD) for water treatment. However, traditional methods easily form asymmetrical membranes with dense skin layers that are detrimental to membrane flux. Herein,...

Emulsions that mix two or more immiscible phases are broadly applied in pharmaceutics, chemistry, and industries. The phase inversion temperature (PIT) method is an emulsifying approach to preparing an emulsion with low energy consumption and cheap e...

As the demand for ore resources increases, the target for mineral exploration gradually shifts from shallow to deep parts of the Earth (>1 km). However, for the ore-hosting strata, it is difficult to obtain high-resolution images by using the elec...

During the preparation of cotton cellulose hydrogels using the phase inversion gelation method of N,N-dimethylacetamide/LiCl solution under ethanol vapor, acetone (AC), methyl ethyl ketone (MEK), or diethyl ketone (DEK) were added as additives, and t...

The radio occultation technique provides stable atmospheric measurements that can work as a benchmark for calibrating and validating satellite-sounding data. Launched on 25 June 2019, the Constellation Observing System for Meteorology, Ionosphere, an...

In high frequency ultrasound imaging (HFUI), the quality of focusing is deeply related to the length of the depth of field (DOF). In this paper, a phase-inversion technique implemented by a dual-element transducer is proposed to enlarge the DOF. The...

In the presented study, we report development of a stable, scalable, and high-quality curcumin-loaded oil/water (o/w) nanoemulsion manufactured by concentration-mediated catastrophic phase inversion as a low energy nanoemulsification strategy. A desi...

Quercetin (QCT), a natural flavonoid, is of research interest owing to its pharmacological properties. However, its pharmacokinetic limitations could hinder its widespread therapeutic use. Nanocarriers, especially solid lipid nanoparticles (SLNs), mi...

Isoliquiritigenin (ILQ) has a number of biological activities such as antitumor and anti-inflammatory effects. However, biomedical applications of ILQ are impeded by its poor aqueous solubility. Therefore, in this research, we prepared a novel ILQ-lo...

Waterborne polyurethane, with a mechanical strength comparable to solvent-based types, is eco-friendly and safe, using water as a dispersion medium. Polyacrylate excels in film formation and weather resistance but suffers from “hot stickiness a...

The scalability and processability of high-performance membranes remain significant challenges in membrane technology. This work focuses on optimizing the pilot-scale production of patterned polysulfone (PSf) ultrafiltration membranes using the spray...

Nanoemulsions have been widely studied as lipophilic compound loading systems. A low-energy emulsification method, phase inversion composition (PIC), was used to prepare oil-in-water nanoemulsions in a carvacrol–coconut oil/Tween 80^®–...

Solid lipid nanoparticles promote skin hydration via stratum corneum occlusion, which prevents water loss by evaporation, and via the reinforcement of the skin’s lipid-film barrier, which occurs through the adhesion of the nanoparticles to the...

Poly(D,L-lactide-co-glycolide is a biodegradable copolymer that can release pharmaceuticals. These pharmaceuticals can provide local therapy and also avert the clinical issues that occur when a drug must be given continuously and/or automatically. Ho...

This work presents a method of obtaining cylindrical polymer structures with a given diameter (approx. 5 mm) using the phase inversion technique. As part of the work, the influence of process parameters (polymer hardness, polymer solution concentrati...

TiO₂-loaded poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-coHFP) membranes were produced by supercritical CO₂-assisted phase inversion. Three different TiO₂ loadings were tested: 10, 20, and 30 wt% with respect to the polymer. Increasing the...

Superior sodium-ion-conducting polymer poly(vinyledene fluoride)–silicon dioxide (PVdF-SiO₂) composite separator membrane was prepared via simple phase inversion method, which is a suitable alternative conventional polypropylene membrane. Basic...

Solid oxide cells (SOCs) have been considered as a promising energy conversion and storage device. However, state-of-the-art cells’ practical application with conventionally fabricated Ni-(Y₂O₃)_0.08(ZrO₂)_0.92 (YSZ) cermet hydrogen electrode and...

The inverse photoacoustic problem is an ill-posed mathematical physics problem. There are many methods of solving the inverse photoacoustic problem, from parameter reduction to the development of complex regularization algorithms. The idea of this wo...

In this work, a novel polymeric membrane was innovated in terms of composition and preparation techniques. A blend of poly(vinylidene fluoride-co-hexafluoropropylene) (PcH) and poly(ethersulfone) (PES) (18 wt.% total polymer concentration) was prepar...

We address the inverse medium scattering problem with phaseless data motivated by nondestructive testing for optical fibers. As the phase information of the data is unknown, this problem may be regarded as a standard phase retrieval problem that cons...

Ultra-compact passive phase shifters are inversely designed by the multi-objective particle swarm optimization algorithm. The wavelength-dependent phase difference between two output beams originates from the different distances of the input light pa...