4,066 Results Found

The interface quality is crucial for the properties of carbon fiber-reinforced polymer- matrix composites (CFRPs). In order to improve the interfacial and mechanical properties of CFRPs, a superior gradient modulus interfacial microstructure is const...

The effect of a tryptic hydrolysis as well as the effect of ionic strength (0–0.4 M NaCl) was investigated on the oil/water interfacial properties of soluble pea protein hydrolysate (SPPH) at neutral pH and room temperature (20 ± 0.01 &d...

We investigated the interfacial properties of symmetric ternary A_n/A_mB_m/B_n and A_n/A_m/2B_mA_m/2/B_n polymeric blends by means of dissipative particle dynamics (DPD) simulations. We systematically analyzed the effects of composition, chain length, and con...

Developing polyimide (PI) fibers with excellent interfacial adhesion and high mechanical properties for the PI fiber-reinforced polymer matrix composites (PFRPs) industry has been challenging. In this work, 4,4′-diamino-(1,1′-biphenyl)-3,...

Aging has a detrimental impact on the interfacial interaction and bonding between asphalt-binder and aggregates, which influence ultimately on the performance of asphalt mixtures and pavements. Evaluation of the mechanical properties of the interface...

For microbial enhanced oil recovery (MEOR), different mechanisms have been introduced. In some of these papers, the phenomena and mechanisms related to biosurfactants produced by certain microorganisms were discussed, while others studied the direct...

Although fiber–matrix interfacial strengths, which affect the mechanical properties of fiber-reinforced plastics (FRPs), are considered to be determined by complex factors, few studies have systematically evaluated the relationship between the...

Gas injection has received increasing attention as one of the key technologies to enhance oil recovery. When gas is dissolved in crude oil, it will accelerate the flow of crude oil by reducing the density, viscosity, interfacial tension (IFT), and ot...

In this study, the effect of the type and content of functional groups on the interfacial shear properties of a functionalized graphene sheet (FGS)/thermoplastic polyurethane (TPU) nanocomposite are investigated by molecular dynamics (MD) simulations...

Recycled carbon fiber, as a novel type of solid waste, possesses high tensile strength, structural stability, and low utilization rates. Recycling carbon fiber for use in cementitious materials presents an efficient solution. However, achieving good...

A series of eco-friendly biocomposites with improved mechanical properties and interfacial interaction were prepared by melt-mixing natural fibers using a cellulose acetate derivative as a polymer matrix and used to evaluate their mechanical, thermal...

Dissipative particle dynamics (DPD) simulations is used to study the effect of A_m/2B_mA_m/2 and H-shaped (A_m/4)₂B_m(A_m/4)₂ block copolymers on the interfacial properties of ternary blends. Our simulations show the following: (i) The capacity of block co...

Fe–Al intermetallic compounds are promising candidates for hydrogen permeation barrier coatings owing to their excellent oxidation stability and inherent resistance to hydrogen embrittlement. However, the mechanical properties and interfacial b...

Ohmic heating (OH) emerged as an alternative processing method for food preservation and has more recently been used to modify the functional properties of proteins. This study aimed to evaluate the effects of OH on the interfacial properties of whey...

This study reports the effect of pH (2, 7, 10) and heat treatment (80 °C for 30 min) on the oil–water (o/w) interfacial behavior of hemp seed protein isolate (HPI) aqueous dispersions. The physicochemical, interfacial adsorption, rheology,...

The contribution of rheological properties and viscoelasticity of the interfacial adsorbed layer to the emulsification mechanism of enzymatic modified sugar beet pectin (SBP) was studied. The component content of each enzymatic modified pectin was lo...

The interfacial and foam properties of proteins can be enhanced by altering the interactions between polyphenols and proteins. The aim of this study was to determine the influence of gallic acid (GA) on the structural properties of whey protein isola...

The dissimilar materials bonding of NiTi alloy with shape memory effect (SME) and CuSn10 alloy with good ductility, electrical conductivity, and thermal conductivity can be used in aerospace, circuits, etc. In order to integrate NiTi and CuSn10 with...

We carried out limited enzymatic hydrolysis with trypsin on rice bran protein (RBP) pretreated by high hydrostatic pressure (HHP) in this study. The effects of the degree of hydrolysis (DH) on the structural and emulsifying properties were investigat...

The mechanical/thermal/electrical properties on-demand design of CNTs-reinforced nanocomposites is a key scientific issue that limits the development of new-generation smart nanomaterials, and the establishment of a corresponding unified theoretical...

In this paper, the impact of La₂O₃ passivation layers on the interfacial properties of Ge-based metal-insulator-semiconductor (MIS) structures was investigated. It was proven that the formation of a thermodynamically stable LaGeO_x component by incorp...

Amorphous La_xAl_yO films were grown on n-type Ge substrate by atomic layer deposition using O₃ and H₂O as oxidant, respectively. A comparison of the XPS results indicated that a thicker interfacial layer with the component of LaGeO_x and GeO_x was forme...

Surfactants play a crucial role in tertiary oil recovery by reducing the interfacial tension between immiscible phases, altering surface wettability, and improving foam film stability. Oil reservoirs have high temperatures and high pressures, making...

The interfacial property of H${}_2$O+CO${}_2$+oil three-phase systems is crucial for CO${}_2$ flooding and sequestration processes but was not well understood. Density gradient theory coupled with PC-SAFT equation of state was applied to investigate the interfacial...

Interfacial interaction is one of the most important factors in the construction of high-performance graphene-based elastomer composites. In this paper, graphene/poly (styrene-b-isoprene-b-styrene) (SIS) composites were prepared with solution mixing...

The effects of oil droplet size and the formation of an interfacial protein film (IPF) on silver carp myofibrillar protein (MP)–oil composite gels were studied. MP- or Tween 80-stabilized camellia seed oil emulsions with different droplet sizes...

Using the method of dissipative particle dynamics (DPD) simulations, we investigated the interfacial properties of PEO/PEO-PPO-PEO/PPO ternary blends composed of the Pluronics L64(EO₁₃PO₃₀EO₁₃), F68(EO₇₆PO₂₉EO₇₆), F88(EO₁₀₄PO₃₉EO₁₀₄), or F127(EO₁₀₆PO...

Interfacial properties significantly influence emulsifying and foaming stability. We here explore the interfacial behavior of egg yolk granules (EYGs) combined with various Span emulsifiers (Span 20, 40, 60, 80) to assess their solution properties, i...

Carbon fiber (CF)-reinforced polyimide (PI) resin matrix composites have great application potential in areas such as rail transport, medical devices, and aerospace due to their excellent thermal stability, dielectric properties, solvent resistance,...

Hybrid density functional theory has been employed to study the influence of interfacial oxygen (O), sulfur (S) and zinc (Zn) vacancies on the optoelectronic properties of ZnO/ZnS heterostructure. The results show that the O, S, and Zn vacancies can...

This study investigated changes in the interfacial properties of epoxy-coated concrete exposed to various conditions, regarding the epoxy type, coating equipment, and exposure environment and period. The measured coating thickness and pull-off bond s...

The effects of N-terminal (1–34 amino acids) and C-terminal (434–487 amino acids) amino acid sequences on the interfacial binding properties of Phospholipase D from Vibrio parahaemolyticus (VpPLD) were characterized by using monomolecular...

Geopolymer, as a new type of solid waste-based inorganic cementitious material, exhibits outstanding behavior in terms of physical and chemical performance, macromechanical properties, long-lasting stability, and features potential application develo...

In this work, duplex stainless steel/low-alloy steel-clad rebars were fabricated using metal deposition and hot rolling. The interfacial characteristics of the rebar, such as element diffusion and phase composition, were investigated using an optical...

The adhesion of the polymer to ceramic nanoparticles is a key aspect in the manufacturing of ceramic parts by additive manufacturing and injection molding, due to poor separation results in separation during processing. The purpose of this research i...

The interfacial properties in carbon fiber (CF)-reinforced polymer composites are substantially limited by the chemically inactive and smooth CF surfaces. In this study, zeolitic imidazolate framework 90 (ZIF90) was chemically grafted onto CF surface...

Wood–plastic composites (WPCs) have received growing attention due to their good water resistance, environmental friendliness, and recyclability. For the application of WPCs in interior decoration and other high–value fields, it is necess...

The interfacial bonding properties of stainless steel clad (SSC) rebars determine whether they can be widely used. In the industrial production of SSC rebars, the process of intermediate and finish rolling of the microstructure evolution, element dif...

In this paper, the mechanical properties, thermal stability, and transparency of ethylene–propylene copolymer (EPC) elastomer modified with various weight percentages (1, 3, and 5 wt.%) of SiO₂ nanofillers have been studied. The nanocomposites...

We explored the effects of the repulsion parameter ($a_{AB}$) and chain length (N_HA or N_HB) of homopolymers on the interfacial properties of A_n/A_x/2B_xA_x/2/B_m ternary polymeric blends using dissipative particle dynamics (DPD) simulations. Our simulations s...

In this work, the Al/Mg bimetals were prepared by traveling magnetic field (TMF)-assisted compound casting, and the effects of current intensity on the interfacial microstructure and mechanical properties of the Al/Mg bimetals were investigated. The...

Healing patterns are a critical issue that influence the fracture mechanism of self-healing concrete (SHC) structures. Partial healing cracks could happen even during the normal operating conditions of the structure, such as sustainable applied loads...

The effects of Ag nanoparticle (Ag NP) addition on interfacial reaction and mechanical properties of Sn–58Bi solder joints using ultra-fast laser soldering were investigated. Laser-assisted low-temperature bonding was used to solder Sn–58...

Τhe fabrication of organic light-emitting diodes (OLEDs) from solution involves the major problem of stack integrity, setting the determination of the composition and the characteristics of the resulting interfaces prerequisite for the optimizati...

This article explores using biomass, namely rice husks, as a reinforcement material in thermoplastic copolyester (TPC) composites. Rice husks were subjected to three chemical pretreatments: single-stage sulfuric acid hydrolysis, first-stage sulfuric...

The focus of this study was to observe the effect of nano calcium carbonate (CaCO₃) modification methods on bamboo fiber (BF) used in BF-reinforced high-density polyethylene (HDPE) composites manufactured by extrusion molding. Two methods were used t...

Titanium-clad (TC) bimetallic steel is an advanced composite steel consisting of metallurgically bonded titanium alloy and structural steel. This paper compared the high-cycle fatigue properties of three types of TC bimetallic steels, including two h...

In this study, reliable Ti₂AlNb/high-Nb-containing TiAl alloy (TAN) joints were achieved by diffusion bonding. The effects of bonding temperature and holding time on the interfacial microstructure and mechanical properties were fully investigated. Th...

Medium-chain triglycerides (MCTs) have been known to have multiple health benefits in treating metabolic disorders and reducing the incidence of obesity. In the present study, the partial replacement of lard with MCTs assisted by ultrasound treatment...

The silicon content in steel is the key to the quality control of hot-dip galvanizing. Its fluctuation will directly restrict the application of galvanized steel by altering the interface reaction and structural stability. This study systematically e...