2,699 Results Found

High-resolution electronics on complex curved surfaces have wide applications in fields such as biometric health monitoring, intelligent aircraft skins, conformal displays, and biomimetics. However, current manufacturing processes can only adapt to l...

Durability of a thermal barrier coating (TBC) depends strongly on the type of mixed oxide in the thermally grown oxide (TGO) of a TBC. This study aims on discovering the effect of thermal stability in the TGO area containing mixed oxides. Two differe...

Silica has many industrial (i.e., glass formers) and scientific applications. The understanding and prediction of the interesting properties of such materials are dependent on the knowledge of detailed atomic structures. In this work, amorphous silic...

The structure and the chemical composition of individual layers as well as of interfaces belonging to the two heterostructures M1 (BaFe12O19/YbFeO3/YSZ) and M2 (YbFeO3/BaFe12O19/YSZ) grown by pulsed laser deposition on yttria-stabilized zirconia (YSZ...

High-resolution 3D visualization of dynamic environments is critical for applications such as remote sensing. Traditional 3D imaging systems, such as lidar, rely on avalanche photodiode (APD) arrays to determine the flight time of light for each scen...

We developed a high spatially-resolved ion-imaging system using focused electron beam excitation. In this system, we designed a nanometric thin sensor substrate to improve spatial resolution. The principle of pH measurement is similar to that of a li...

Many magnetotactic bacteria (MTB) biomineralize magnetite crystals that nucleate and grow inside intracellular membranous vesicles originating from invaginations of the cytoplasmic membrane. The crystals together with their surrounding membranes are...

A digital pulse width modulator (DPWM) is a key component in digital power electronics. Techniques like space vector modulation, along with rising switching frequencies from wide-bandgap power transistors, create a need for a center-aligned high-reso...

In this work, 1 eV Ga0.7In0.3As inverted metamorphic (IMM) solar cells were analyzed to achieve a deeper understanding of the mechanism limiting their improvement. For this purpose, high-resolution X-ray diffraction (HRXRD), transmission electron mic...

A novel class of quaternary intermetallic alloys based on CoPt is investigated in view of their interesting magnetic properties induced by the presence of hard magnetic L10 phase. A Co48Pt28Ag6B18 alloy has been prepared by rapid solidification from...

Due to the multiple and poorly-crystallized phases in ferromanganese (Fe–Mn) nodules, research on the variability of micro-layers in nodules is limited and the accumulation of various elements with the growth of micro-layers have not been well...

Stretchable display technology has rapidly evolved, enabling a new generation of flexible electronics with applications ranging from wearable healthcare and smart textiles to implantable biomedical devices and soft robotics. This review systematicall...

Advanced micro/nano-flexible sensors, displays, electronic skins, and other related devices provide considerable benefits compared to traditional technologies, aiding in the compactness of devices, enhancing energy efficiency, and improving system re...

The layered oxides LiNixMnyCozO2 (NMCs, x + y + z = 1) with high nickel content (x ≥ 0.6, Ni-rich NMCs) are promising high-energy density-positive electrode materials for Li-ion batteries. Their electrochemical properties depend on Li+/Ni2+ cation di...

A series of AlGaN/GaN high-electron-mobility transistor (HEMT) structures, with an AlN thin buffer, GaN thick layer and Al0.25Ga0.75N layer (13–104 nm thick), is prepared by metal–organic chemical vapor deposition and investigated via mul...

Coenzyme Q10 (CoQ10) is an essential component of the mitochondrial electron transfer system and a potent antioxidant. The impact of CoQ10 supplementation on mitochondrial capacities and the muscle proteome is largely unknown. This study determined t...

Environmental nanoparticles are known to be present in various aquatic environments, exerting significant influences on water quality, particularly in water distribution systems. However, there has been a notable dearth of research on the presence an...

The evaluation of the biological effects of endoprosthetic wear particles on cells in vitro relies on a variety of test assays. However, most of these methods are susceptible to particle-induced interferences; therefore, label-free testing approaches...

In the field of soft electronics, high-resolution and transparent structures based on various flexible materials constructed via various printing techniques are gaining attention. With the support of electrical stress-induced conductive inks, the ele...

Printing electronics directly onto fabric to create e-textiles is a promising technology, but it is currently limited by the achievable printing resolution. The suitability of a bespoke reverse-offset printing system for use in printed e-textile devi...

The effect of neutron irradiation on the structural, optical, and electronic properties of doped strained heterostructures with AlGaAs/InGaAs/GaAs and AlGaAs/InGaAs/AlGaAs quantum wells was experimentally studied. Heterostructures with a two-dimensio...

Radiation detectors based on Cadmium Zinc Telluride (CZT) compounds are becoming popular solutions thanks to their high detection efficiency, room temperature operation, and to their reliability in compact detection systems for medical, astrophysical...

The use of peptide-drug conjugates has generated wide interest as targeted antitumor therapeutics. The anthracycline antibiotic, daunomycin, is a widely used anticancer agent and it is often conjugated to different tumor homing peptides. However, com...

Examination of a fly ash derived from the combustion of a low-S, subbituminous Powder River Basin coal by Scanning Electron Microscopy (SEM) and High-resolution Transmission Electron Microscopy (HRTEM), both supplemented by Energy-dispersive X-ray sp...

We developed a single-shot X-ray spectrometer for wide-range high-resolution measurements of Self-Amplified Spontaneous Emission (SASE) X-ray Free Electron Laser (XFEL) pulses. The spectrometer consists of a multi-layer elliptical mirror for producin...

Multilayer nanolaminate TiAlN/Ag and Al2O3/Ag metal-insulator-metal (MIM) coatings with thicknesses of individual layers from a few to several hundreds of nanometers were fabricated by direct current magnetron sputtering. Their optical transmittance...

A modern scanning electron microscope equipped with a pixelated detector of transmitted electrons can record a four-dimensional (4D) dataset containing a two-dimensional (2D) array of 2D nanobeam electron diffraction patterns; this is known as a four...

The thermally-induced crystallization of anodically grown TiO2 amorphous nanotubes has been studied so far under ambient pressure conditions by techniques such as differential scanning calorimetry and in situ X-ray diffraction, then looking at the ov...

Cyanobacterial cytochrome c6 (Cyt c6) is crucial for electron transfer between the cytochrome b6f complex and photosystem I (PSI), playing a key role in photosynthesis and enhancing adaptation to extreme environments. This study investigates the high...

In the present research, silver nanoparticles were synthesized using ground nutshell and characterized using UV-visible, FTIR and PXRD. The SEM and HR-TEM aided in confirming the nano size, surface morphology and phase purity of the AgNPs. The quantu...

Precipitation hardened and tempered martensitic-ferritic steels (TMFSs) are used in many areas of our daily lives as tools, components in power generation industries, or in the oil and gas (O&G) industry for creep and corrosion resistance. In add...

The realization of stable inorganic perovskites is crucial to enable low-cost solution-processed photovoltaics. However, the main candidate material, CsPbI3, suffers from a spontaneous phase transition at room temperature towards a photo-inactive ort...

The effects of the Cu content on the microstructure and strengthening mechanisms of the Al-Mg-Si-xCu alloys were systematically investigated using scanning electron microscopy (SEM), electron probe microanalysis (EPMA), transmission electron microsco...

MoAlB is a potential candidate for high-temperature application since a dense, adherent alumina scale is formed. While, based on X-ray diffraction investigations, the formation of phase pure orthorhombic MoAlB coatings is observed, energy dispersive...

Accurate characterization of Pt-Pd alloy nanoparticle clusters (NCs) is crucial for understanding their synthesis using Gas-Diffusion Electrocrystallization (GDEx). In this study, we propose a comprehensive approach that integrates conventional sizin...

By means of alteration of the transmitted linear frequency modulation (LFM) signal waveform parameters, such as pulse width or chirp rate, initial phase, pulse repetition interval (PRI), and chirp rate polarity at every position of synthetic aperture...

The fabrication of high-efficiency GaAsP-based solar cells on GaAs wafers requires addressing structural issues arising from the materials lattice mismatch. We report on tensile strain relaxation and composition control of MOVPE-grown As-rich GaAs1&m...

The DLC coating of samples produced by additive manufacturing with complex shapes is a challenge but also shows the possibility of obtaining a diffusive barrier for biomedical applications. In this study, stochastic porous structures based on Voronoi...

The effects of natural ageing treatment prior to artificial ageing treatment on the microstructures and mechanical properties of AA7075 Al-5.7Zn-2.6Mg-1.5Cu-0.18Cr-0.08Mn-0.05Si-0.17Fe (wt.%) aluminum alloy have been investigated. The hardness of sol...

Trichomonas vaginalis is an extracellular protozoan parasite that causes human trichomoniasis, a sexually transmitted infection (STI) that affects approximately 270 million people worldwide. The phenomenon of T. vaginalis adhesion to inert substrates...

We report the synthesis of a room temperature ferromagnetic Mn-Ge system obtained by simple deposition of manganese on Ge(001), heated at relatively high temperature (starting with 250 °C). The samples were characterized by low energy electron diffra...

The use of metal immunoprobes, defined as recognition molecules (e.g., antibodies) labeled with metal tags, constitutes an interesting strategy for the analysis of proteins in biological samples. Fluorescent and biocompatible metal nanoclusters (MNC)...

The aim of the work was to characterize the structure of Al65Cu20Fe15 alloy obtained with the use of conventional casting and rapid solidification-melt-spinning technology. Based on the literature data, the possibility of an icosahedral quasicrystall...

The preparation of gold nanoparticles (AuNPs) involves a variety of chemical and physical methods. These methods use toxic and environmentally harmful chemicals. Consequently, the synthesis of AuNPs using green chemistry has been under investigation...

Two methods for the determination of geometrically necessary dislocation (GND) densities are implemented in a lower-order strain-gradient crystal plasticity finite element model. The equations are implemented in user material (UMAT) subroutines. Meth...

The metallic-associated adverse local tissue reactions (ALTR) and events accompanying worn-broken implant materials are still poorly understood on the subcellular and molecular level. Current immunohistochemical techniques lack spatial resolution and...

Fundamental studies of the interaction of adsorbates with metal oxides alone and on which a noble metal is deposited provide information needed for catalytic reactions. Rh/CeO2 is one of the textbook catalysts for many reactions including syngas conv...

An all-digital on-chip delay sensor (OCDS) circuit with high delay-measurement resolution and low supply-voltage sensitivity for efficient detection and diagnosis in high-performance electronic system applications is presented. Based on the proposed...

Te precipitates in CdZnTe (CZT) crystals grown by the traveling heater method (THM) are investigated using high-resolution transmission electron microscopy (HRTEM). The results show that in THM-grown CZT crystals, Te precipitates are less than 10 nm...

The main strengthening mechanism for Inconel 718 (IN718), a Ni-based superalloy, is precipitation hardening by γ′ and γ″ particles. It is thus essential, for good alloy performance, that precipitates with the desired chemical...