Skip to Content
You are currently on the new version of our website. Access the old version .

99 Results Found

  • Article
  • Open Access
3 Citations
2,675 Views
14 Pages

Eutectoid Transformation Kinetics of FeO under N2 and Air Atmospheres

  • Hao Wang,
  • Guangming Cao,
  • Silin Li,
  • Wencong Zhao and
  • Zhenyu Liu

24 January 2023

The effect of different oxygen content on eutectoid transformation kinetics in FeO were studied in this paper. Thermogravimetric analysis was employed to investigate the eutectoid reaction in the oxide formed on pure Fe after being exposed to air at...

(This article belongs to the Special Issue High Temperature Corrosion or Oxidation of Metals and Alloys)
  • Article
  • Open Access
4 Citations
4,894 Views
15 Pages

18 July 2018

This paper presents a new microstructural model of the metastable eutectoid transformation in spheroidal graphite cast irons. The model takes into account the nucleation and growth of pearlite nodules. The nucleation is assumed to be continuous and d...

(This article belongs to the Special Issue Microstructure based Modeling of Metallic Materials)
  • Article
  • Open Access
10 Citations
4,509 Views
13 Pages

Dendritic Segregation of Zn-Al Eutectoid Alloys

  • Ildiko Peter,
  • Mirela Agapie and
  • Bela Varga

8 November 2018

The structural investigations performed and described in this paper are focused on both the segregation phenomenon at the dendrite level, and on the external structure in the equilibrium state. Qualitative and quantitative investigations of the Zn-Al...

  • Article
  • Open Access
1 Citations
2,300 Views
15 Pages

18 November 2021

The tensile properties and superplasticity of a forged SP700 alloy with slow eutectoid element (1.5%Cr) addition were investigated in the present paper. The results of the microstructures showed that slow eutectoid element Cr has a significant influe...

(This article belongs to the Special Issue Research Progress in the Microstructure and Mechanical Properties of Light Alloys)
  • Article
  • Open Access
4 Citations
4,324 Views
16 Pages

20 February 2022

In this work, a novel routine to realize the rapid spheroidizing annealing (SA) process has been proposed in M50 steel via combining warm deformation (WD) and divorced eutectoid transformation (DET). In this process, the sample is first subjected to...

(This article belongs to the Special Issue Advanced Rolling, Heat Treatment and Electromagnetic Processing Technology of High Performance Metals)
  • Article
  • Open Access
10 Citations
3,160 Views
13 Pages

Numerical Simulation of Wire Rod Cooling in Eutectoid Steel under Forced-Convection

  • Monserrat Sofía López-Cornejo,
  • Héctor Javier Vergara-Hernández,
  • Sixtos Antonio Arreola-Villa,
  • Octavio Vázquez-Gómez and
  • Martín Herrejón-Escutia

28 January 2021

A coupled thermal-microstructural simulation model was developed to estimate the thermal history in a eutectoid steel wire rod under continuous cooling and forced-convection. The model coupled the phenomena of heat transfer, phase transformation and...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
20 Citations
5,292 Views
15 Pages

25 February 2019

In order to investigate the influence of vanadium microalloying on deformation-induced pearlite transformation (DIPT) of eutectoid steel, thermomechanical simulation tests were carried out in this study. The following four compositions of vanadium mi...

  • Article
  • Open Access
27 Citations
5,361 Views
22 Pages

25 August 2021

This study is focused on isothermal and anisothermal precipitation of M23C6 carbides from the fully ferritic structure of the (γ + δ) austenitic-ferritic duplex stainless steel X2CrNiMo2253, (2205). During isothermal heat treatments, small particles...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
7 Citations
2,247 Views
25 Pages

29 July 2023

This paper studies the hydrogen-assisted microdamage (HAMD) in fully-pearlitic steel. A detailed analysis is provided of the HAMD region in axisymmetric round-notched samples of high-strength eutectoid pearlitic steel under hydrogen embrittlemen...

  • Article
  • Open Access
6 Citations
3,474 Views
11 Pages

27 September 2022

High specific Young’s modulus steel reinforced by κ-carbides has the characteristics of high strength and low density, which introduces potential applications of this material in automotive parts with a stiffness requirement. In this work...

(This article belongs to the Special Issue Advances in High Strength Steels)
  • Article
  • Open Access
19 Citations
6,527 Views
17 Pages

29 November 2019

Interrupted and continuous hot compression tests were performed for eutectoid steel over the temperature range of 850 to 1050 °C and while using strain rates of 0.001, 0.01, 0.1, and 1 s−1. The interrupted tests were carried out to characte...

(This article belongs to the Special Issue Static and Dynamic Recrystallization, and Phase Transformation in Metallic Materials)
  • Feature Paper
  • Article
  • Open Access
21 Citations
5,279 Views
19 Pages

9 July 2019

The aim of this work was to study expansively the process of the eutectoidal phase transformation of 2507-type super-duplex stainless steel. Three sample sets were prepared. The first sample set was made to investigate the effect of the previous cold...

(This article belongs to the Special Issue Advances in Duplex Stainless Steels)
  • Article
  • Open Access
7 Citations
3,582 Views
14 Pages

Improving the Performance Properties of Eutectoid Steel Products by a Complex Effect

  • Vitaliy Vlasovets,
  • Tatiana Vlasenko,
  • Stepan Kovalyshyn,
  • Taras Shchur and ,
  • Oleksandra Bilovod,
  • Lyudmila Shulga,
  • Mariusz Łapka,
  • Milan Koszel,
  • Stanisław Parafiniuk and
  • Leszek Rydzak
  • + 5 authors+ 0 author

30 November 2022

This study focuses on the assessment of possible hypereutectoid steel carbide mesh crushing. It is used for tools production, including forming rolls of various diameters, with modification and cyclic heat treatment methods. For steel containing 1.79...

(This article belongs to the Special Issue Advances in Surface Modification on Microstructure and Properties of Metals)
  • Article
  • Open Access
8 Citations
3,607 Views
15 Pages

5 April 2020

The main purpose of this work was to experimentally determine the effect of the cooling rate during the eutectoid transformation on the corrosion resistance of a hypoeutectic Zn-4Al cast alloy in 5% NaCl solution. This was considered in relation to t...

(This article belongs to the Special Issue Corrosion and Protection of Materials)
  • Article
  • Open Access
1 Citations
3,157 Views
17 Pages

Increasing the Strength and Impact Toughness of Carbon Steel Using a Nanosized Eutectoid Resulting from Time-Controlled Quenching

  • Michail Brykov,
  • Dariusz Mierzwiński,
  • Vasily Efremenko,
  • Vasyl’ Girzhon and ,
  • Vadim Shalomeev,
  • Oleksandr V. Shyrokov,
  • Ivan Petryshynets,
  • Olexandr Klymov and
  • Oleksii Kapustyan
  • + 4 authors+ 0 author

26 July 2024

High-carbon steels are normally used as tool materials. The use of such steels for construction is limited due to their increased brittleness and poor weldability. However, it appears that high-carbon steels possess certain hidden reserves for enhanc...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
29 Citations
8,781 Views
13 Pages

Study on the Nucleation and Growth of Pearlite Colony and Impact Toughness of Eutectoid Steel

  • Fei Zhang,
  • Yonggang Zhao,
  • Yuanbiao Tan,
  • Xuanming Ji and
  • Song Xiang

23 October 2019

The relationship between microstructure parameters and mechanical properties was studied in this paper. The steel was heat-treated at different austenitizing temperatures to acquire varying microstructure. The results showed that austenite grain size...

(This article belongs to the Special Issue Forming and Heat Treatment of Modern Metallic Materials)
  • Article
  • Open Access
11 Citations
7,896 Views
11 Pages

3 August 2020

The effects of microstructural features on torsional ductility of cold drawn and annealed hyper-eutectoid steel wires were investigated. The patented wire rods were successively dry drawn to ε = 0.79 (54.7%) ~ 2.38 (90.7%). To examine the eff...

(This article belongs to the Special Issue Heat Treatment of Iron- and Aluminum-Based Alloys)
  • Article
  • Open Access
13 Citations
4,347 Views
18 Pages

The Creep and Oxidation Behaviour of Pesting-Resistant (Mo,Ti)5Si3-Containing Eutectic-Eutectoid Mo-Si-Ti Alloys

  • Susanne Obert,
  • Alexander Kauffmann,
  • Rupert Pretzler,
  • Daniel Schliephake and ,
  • Frauke Hinrichs and
  • Martin Heilmaier
  • + 1 author+ 0 author

18 January 2021

In this study we present a series of light-weight (6.24 to 6.42 g/cm3), Ti-rich Mo-Si-Ti alloys (≥40 at.% nominal Ti content) with the hitherto best combination of pesting and creep resistance at 800 and 1200 °C, respectively. This has been ac...

(This article belongs to the Special Issue Creep Behavior of Metals and Alloys)
  • Article
  • Open Access
43 Citations
5,378 Views
12 Pages

The Effect of Copper Content on the Mechanical and Tribological Properties of Hypo-, Hyper- and Eutectoid Ti-Cu Alloys

  • Yiku Xu,
  • Jianli Jiang,
  • Zehui Yang,
  • Qinyang Zhao and ,
  • Yongnan Chen and
  • Yongqing Zhao
  • + 1 author+ 0 author

3 August 2020

Titanium alloys are widely used in aerospace, chemical, biomedical and other important fields due to outstanding properties. The mechanical behavior of Ti alloys depends on microstructural characteristics and type of alloying elements. The purpose of...

(This article belongs to the Special Issue Structure and Mechanical Properties of Alloys)
  • Article
  • Open Access
3 Citations
4,494 Views
10 Pages

The Application of 40Ti-35Ni-25Nb Filler Foil in Brazing Commercially Pure Titanium

  • Shan-Bo Wang,
  • Chuan-Sheng Kao,
  • Leu-Wen Tsay and
  • Ren-Kae Shiue

1 March 2018

The clad ternary 40Ti-35Ni-25Nb (wt %) foil has been applied in brazing commercially pure titanium (CP-Ti). The wavelength dispersive spectroscope (WDS) was utilized for quantitative chemical analyses of various phases/structures, and electron back s...

(This article belongs to the Special Issue Science, Characterization and Technology of Joining and Welding)
  • Article
  • Open Access
10 Citations
3,082 Views
10 Pages

10 October 2021

Dissimilar brazing of Ti–15Mo–5Zr–3Al (Ti-1553) to commercially pure titanium (CP-Ti) using Ti–15Cu–15Ni foil was performed in this work. The microstructures in different sites of the brazed joint showed distinct morphologies, which resulted from the...

(This article belongs to the Special Issue Welding and Joining of Materials for Advanced Aerospace Applications)
  • Article
  • Open Access
23 Citations
14,220 Views
25 Pages

5 June 2018

The non-alloyed hypo-eutectoid steel C45 was annealed in a steady air atmosphere at T > AC1 using three temperature ranges and annealing times ta = ½, 1 and 2 h. The oxidation and decarburization obeyed the parabolic law of growth with time...

  • Article
  • Open Access
7 Citations
2,333 Views
18 Pages

Hybrid Treatment and Natural Aging Behavior of Peak-Aged Eutectoid Steel Powder-Reinforced Al 7075 Matrix Composites

  • Ananda Hegde,
  • Karthik Birur Manjunathaiah,
  • Sathyashankara Sharma,
  • Gowrishankar Mandya Chennegowda and ,
  • Gajanan Anne and
  • Ramakrishna Vikas Sadanand
  • + 1 author+ 0 author

29 February 2024

The current work focuses on the natural aging phenomenon of a eutectoid steel powder-(0.8 wt.%) reinforced Al-Zn-Mg (Al 7075) alloy, which was subjected to a hybrid heat treatment. The hybrid treatment comprises the aging treatment of a matrix and th...

(This article belongs to the Special Issue Metal Composites, Volume II)
  • Article
  • Open Access
9 Citations
3,878 Views
16 Pages

29 August 2018

The precipitation of (Cr,Fe)23C6 carbide could significantly degrade the mechanical properties of Nb-bearing cast austenitic heat-resistant steels, designed for exhaust components of automotive gasoline engines at 1000 °C. In the current research...

  • Article
  • Open Access
10 Citations
5,761 Views
16 Pages

Assessment of Effects of Si-Ca-P Biphasic Ceramic on the Osteogenic Differentiation of a Population of Multipotent Adult Human Stem Cells

  • Patricia Ros-Tárraga,
  • Rubén Rabadan-Ros,
  • Angel Murciano,
  • Luis Meseguer-Olmo and
  • Piedad N. De Aza

29 November 2016

A new type of bioceramic with osteogenic properties, suitable for hard tissue regeneration, was synthesised. The ceramic was designed and obtained in the Nurse’s A-phase-silicocarnotite subsystem. The selected composition was that corresponding to th...

(This article belongs to the Special Issue Bioceramics 2016)
  • Article
  • Open Access
6 Citations
2,255 Views
14 Pages

Influence of the Morphology of Eutectoid Steels on Corrosion Resistance in NaCl Aqueous Medium with and without CO2

  • Francisco Felipe de M. Fideles,
  • Mauro Andres C. Florez,
  • Maria Veronica G. Rodrigues,
  • Jorge Luiz Cardoso and ,
  • Clodualdo Aranas,
  • Samuel F. Rodrigues,
  • Marcos Natan da S. Lima,
  • Caio Victor P. Pascoal,
  • Thiago Alves de Moura and
  • Hamilton F. Gomes de Abreu
  • + 7 authors+ 2 authors

20 October 2023

This study conducts a comparative electrochemical evaluation of three types of pearlitic steels used in flexible pipelines for oil transport in marine environments. The steels have been manufactured with chemical composition and geometry variations t...

(This article belongs to the Section Corrosion and Protection)
  • Review
  • Open Access
25 Citations
3,756 Views
32 Pages

Design and Development of High-Strength and Ductile Ternary and Multicomponent Eutectoid Cu-Based Shape Memory Alloys: Problems and Perspectives

  • Vladimir G. Pushin,
  • Nataliya N. Kuranova,
  • Alexey E. Svirid,
  • Alexey N. Uksusnikov and
  • Yurii M. Ustyugov

30 July 2022

An overview is presented on the structural and phase transformations and physical and mechanical properties of those multicomponent copper-based shape memory alloys which demonstrate attractive commercial potential due to their low cost, good shape m...

(This article belongs to the Special Issue Structure, Texture and Functional Properties of Shape Memory Alloys)
  • Article
  • Open Access
13 Citations
4,497 Views
22 Pages

18 August 2022

The article presents the results of the research determining the synergistic effect of Mg and Si additives in the ZnAl23 bath on the microstructure (SEM), growth kinetics, and corrosion resistance of coatings obtained by the batch double hot dip meth...

(This article belongs to the Special Issue Corrosion and Anticorrosion of Alloys/Metals)
  • Article
  • Open Access
8 Citations
5,518 Views
15 Pages

20 January 2021

The relationship between microstructures and ductility parameters, including reduction of area, elongation to failure, occurrence of delamination, and number of turns to failure in torsion, in hypereutectoid pearlitic steel wires was investigated. Th...

(This article belongs to the Special Issue Heat Treatment of Steels)
  • Article
  • Open Access
5 Citations
3,107 Views
19 Pages

12 June 2020

Forming processes influence the mechanical properties of manufactured workpieces in general and by means of forming-induced initial damage in particular. The effect of the latter on performance capability is the underlying research aspect for the inv...

(This article belongs to the Special Issue Manufacturing and Fatigue Properties of Materials)
  • Article
  • Open Access
4 Citations
2,882 Views
22 Pages

21 April 2025

As the cross-sectional size of bearing steel increases, maintaining a uniform microstructure becomes more difficult. To address this issue in large-section 1.0C-1.5Cr bearing steel, the behavior of carbides during isothermal spheroidization annealing...

  • Article
  • Open Access
4 Citations
3,410 Views
16 Pages

18 February 2025

The oxidation behaviour of Ti alloys is a crucial aspect for structural components operating at high service temperature. The aim of this study is to identify the oxidation kinetics and mechanism of binary Ti-Cu alloys with a progressively higher amo...

(This article belongs to the Section Powder Metallurgy)
  • Article
  • Open Access
17 Citations
5,836 Views
12 Pages

Revising the Subsystem Nurse’s A-Phase-Silicocarnotite within the System Ca3(PO4)2–Ca2SiO4

  • Patricia Ros-Tárraga,
  • Patricia Mazón,
  • Luis Meseguer-Olmo and
  • Piedad N. De Aza

28 April 2016

The subsystem Nurse’s A-phase-silicocarnotite within the system Ca3(PO4)2–Ca2SiO4 was conducted as a preliminary step toward obtaining new biomaterials with controlled microstructures. Phase composition of the resulting ceramics was studied by X-ray...

(This article belongs to the Section Biomaterials)
  • Feature Paper
  • Article
  • Open Access
5 Citations
3,978 Views
10 Pages

5 January 2022

Phase equilibria among δ-Fe, γ-Fe, and Fe2M phases in the Fe-Cr-M (M: Hf, Ta) ternary systems were determined using bulk alloys heat-treated at high temperatures. The final goal of this study is to develop novel ferritic heat resistant st...

  • Article
  • Open Access
8 Citations
2,970 Views
17 Pages

Chromium Diffusion Coatings for Mo-Based Silicides to Improve Their Oxidation Resistance

  • Katharina Beck,
  • Frauke Hinrichs,
  • Ceyhun Oskay,
  • Anke S. Ulrich and ,
  • Martin Heilmaier and
  • Mathias C. Galetz
  • + 1 author+ 0 author

29 September 2023

The oxidation behavior of two ternary Mo-Si-Ti alloys (eutectic Mo-20.0Si-52.8Ti and eutectoid Mo-21.0Si-34.0Ti) was investigated using thermogravimetric analysis at 700 °C, 900 °C, and 1300 °C for 100 h. The eutectic alloy formed a prote...

(This article belongs to the Section Corrosion, Wear and Erosion)
  • Article
  • Open Access
5 Citations
1,361 Views
25 Pages

The Effect of Yttrium Addition on the Solidification Microstructure and Sigma Phase Precipitation Behavior of S32654 Super Austenitic Stainless Steel

  • Jun Xiao,
  • Geng Tian,
  • Di Wang,
  • Shaoguang Yang and ,
  • Kuo Cao,
  • Jianhua Wei and
  • Aimin Zhao
  • + 2 authors+ 0 author

15 July 2025

This study focuses on S32654 super austenitic stainless steel (SASS) and systematically characterizes the morphology of the sigma (σ) phase and the segregation behavior of alloying elements in its as-cast microstructure. High-temperature confoc...

  • Article
  • Open Access
5 Citations
5,258 Views
9 Pages

Phase Diagram of near Equiatomic Zr-Pd Alloy

  • Mitsuhiro Matsuda,
  • Tomohiro Nishiura,
  • Takateru Yamamuro and
  • Minoru Nishida

21 May 2018

The exact eutectoid and peritectoid temperatures in near equiatomic Zr-Pd compositions have been determined by using the diffusion couple method and microstructure analysis. The crystal structure of Zr13Pd12 compound were estimated to be orthorhombic...

(This article belongs to the Special Issue Zirconium Alloys)
  • Feature Paper
  • Article
  • Open Access
10 Citations
4,754 Views
11 Pages

Microstructure and Martensitic Transformation Behavior in Thermal Cycled Equiatomic CuZr Shape Memory Alloy

  • Shota Hisada,
  • Mitsuhiro Matsuda,
  • Minoru Nishida,
  • Carlo Alberto Biffi and
  • Ausonio Tuissi

18 May 2019

Equiatomic CuZr alloy undergoes a martensitic transformation from the B2 parent phase to martensitic phases (P21/m and Cm) below 150 °C. We clarified the effect of the thermal cycling on the morphology and crystallography of martensite in equiatomic...

(This article belongs to the Special Issue Intermetallic Alloys)
  • Article
  • Open Access
2 Citations
2,080 Views
13 Pages

Microstructural, Chemical, and Crystallographic Investigations of Dynamic Strain-Induced Ferrite in a Microalloyed QT Steel

  • Stefan Monschein,
  • Katharina S. Ragger,
  • Josef Fasching,
  • Dominik Zügner and
  • Ronald Schnitzer

10 February 2022

Dynamic strain-induced transformation (DSIT) enables the formation of fine-grained ferritic microstructures, which are well suited for cold forming processes in the as-rolled condition. In this work, the formation mechanism, chemical composition, and...

  • Article
  • Open Access
7 Citations
3,219 Views
17 Pages

Characterization of Heterogeneous Microstructure and Mechanical Properties of Q345R Welded Joints including Roles of the Welding Process

  • Qingkun He,
  • Xiaodong Hu,
  • Qitong Sun,
  • Zhilong Dong and ,
  • Xuefang Xie and
  • Han Wang
  • + 1 author+ 0 author

12 October 2022

In this paper, the roles of the welding process on the heterogeneous microstructure and mechanical properties of Q345R welded joints were analyzed by a series of tests, including the preparation of welded joints with different welding processes, opti...

(This article belongs to the Special Issue Residual Stress and Fatigue of Metals)
  • Article
  • Open Access
6 Citations
3,633 Views
16 Pages

22 May 2022

For the first time, uniaxial megaplastic compression was successfully applied to a polycrystalline shape-memory Cu-Al-Ni-based alloy. The samples before and after uniaxial megaplastic compression were examined by methods of X-ray diffraction, optical...

(This article belongs to the Special Issue Materials with Shape Memory: Phase Transformations, Microstructure and Properties)
  • Article
  • Open Access
3 Citations
3,011 Views
16 Pages

3 December 2018

The response of the hypo-eutectoid steel to laser hardening, which is measured as the depth of the increased hardness, depends not only on the set of the process parameters but also on the prior microstructure of the workpiece. The multiple prelimina...

  • Article
  • Open Access
3 Citations
2,675 Views
8 Pages

21 July 2022

An ordered ω-Al4Cr phase synthesized recently by a high-pressure sintering (HPS) approach was calculated to be stable by density function theory (DFT), implying that high pressure can accelerate the disorder-order phase transitions. The structu...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
562 Views
16 Pages

10 July 2026

High-magnesium Zn-Al-Mg coatings with different Al contents were prepared using a laboratory hot-dipped galvanizing simulator. The planar corrosion resistance and its mechanism were systematically investigated by analyzing the microstructure and corr...

(This article belongs to the Special Issue High-Performance Alloys and Steels: Design, Processing, and Applications)
  • Communication
  • Open Access
9 Citations
2,982 Views
10 Pages

Eutectic MoNbTa(WC)x Composites with Excellent Elevated Temperature Strength

  • Kejia Kang,
  • Xiao Wang,
  • Weibing Zhou,
  • Peibo Li and ,
  • Zihao Huang,
  • Guoqiang Luo,
  • Qiang Shen and
  • Lianmeng Zhang
  • + 3 authors+ 0 author

30 March 2023

To develop materials with a promising utilization future in the extreme environments of aerospace, the MoNbTa(WC)x composites were prepared by vacuum arc melting, of which the crystal structure, microstructure, and compression properties at elevated...

(This article belongs to the Special Issue Deformation Behavior and Mechanical Properties of High Entropy Alloys)
  • Article
  • Open Access
21 Citations
4,661 Views
22 Pages

Study of the Phase Transitions in the Binary System NPG-TRIS for Thermal Energy Storage Applications

  • Sergio Santos-Moreno,
  • Stefania Doppiu,
  • Gabriel A. Lopez,
  • Nevena Marinova and ,
  • Ángel Serrano,
  • Elena Silveira and
  • Elena Palomo del Barrio
  • + 2 authors+ 0 author

5 March 2020

Neopentylglycol (NPG) and tris(hydroxymethyl)aminomethane (TRIS) are promising phase change materials (PCMs) for thermal energy storage (TES) applications. These molecules undergo reversible solid-solid phase transitions that are characterized by hig...

(This article belongs to the Special Issue Phase Change Materials for Thermal Energy Storage)
  • Article
  • Open Access
8 Citations
2,919 Views
15 Pages

28 February 2023

Microalloyed steels have emerged to replace conventional plain-carbon steels to achieve longer wheel life on Chinese railroads. In this work, with the aim of preventing spalling, a mechanism that consists of ratcheting and shakedown theory correlated...

(This article belongs to the Special Issue Mechanical Properties and Deformation Mechanisms of Advanced Metals and Alloys)
  • Article
  • Open Access
13 Citations
4,043 Views
11 Pages

19 March 2021

This study observed the effect of filler metal type on mechanical properties of NAB (NiAl-bronze) material fabricated using wire arc additive manufacturing (WAAM) technology. The selection of filler metal type is must consider the field condition, me...

(This article belongs to the Special Issue Additive Manufacturing of Non-ferrous Alloys)
  • Article
  • Open Access
8 Citations
5,216 Views
15 Pages

The Li2SO4–Na2SO4 System for Thermal Energy Storage

  • Stefania Doppiu,
  • Jean-Luc Dauvergne,
  • Angel Serrano and
  • Elena Palomo del Barrio

7 November 2019

In this paper, the system Li2SO4–Na2SO4 is proposed as a candidate material for thermal energy storage applications at high temperatures (450–550 °C). Depending on the composition, the thermal energy can be stored by using a eutectoid...

(This article belongs to the Special Issue Phase Change Materials for Thermal Energy Storage)
  • Article
  • Open Access
15 Citations
5,857 Views
11 Pages

Temperature Measurement during Abrasive Water Jet Machining (AWJM)

  • Damian Bańkowski,
  • Piotr Młynarczyk and
  • Irena M. Hlaváčová

12 October 2022

This study was undertaken to look for confirmation that heat transfer induced by abrasive water jet machining (AWJM) affects the microstructure of the material cut. The structure of S235JR carbon steel used in the experiments was reported to change l...

(This article belongs to the Special Issue Advanced Technology of Material Processing: Abrasive Water Jet Machining)

of 2