2,064 Results Found

Experimental results related to the photoactivated dc conductance of anatase TiO₂ nanotubular arrays (aTNTAs) under pulsed irradiation by a laser light inside and outside the fundamental absorption band are presented. It is found that the mobility an...

The high dv/dt and di/dt outputs from power devices in a high-low voltage DC-DC converter on electric vehicles (EVs) can always introduce the unwanted conducted electromagnetic interference (EMI) emissions. A conducted EMI prediction and mitigation s...

Conductive oxides are widely studied as cathode materials for electrochemical cells, such as solid oxide fuel cells (SOFCs), because of their chemical stability and high electrical conductivity at high temperatures (800–950 °C). The cathode is a key...

In this work, the structural characteristics and DC electrical conductivity of firstly synthesized organic–inorganic nanocomposites of thermoelectric Te⁰ nanoparticles (1.4, 2.8, 4.3 wt%) and poly(1-vinyl-1,2,4-triazole) (PVT) were analyzed. Th...

The large dv/dt and di/dt outputs of power devices in DC-fed motor drive systems in electric vehicles (EVs) always introduce conducted electromagnetic interference (EMI) emissions and may lead to motor drive system energy transmission losses. The eff...

Sol–gel layers have been the subject of many studies in recent decades. However, very little information exists about layers in which carbon structures are developed in situ. Using the spin-coating method, we obtained thin iron-doped SiO₂/C composite...

At present, HTS magnets cannot operate in the real closed-loop persistent current mode due to the existence of joint resistance, flux creep, and AC loss of the HTS tape. Instead of using a current source, HTS flux pumps are capable of injecting flux...

In this study, the role of ion dissociation on formation of silver nanoparticle and DC conductivityin PVA:AgNO₃ based solid polymer electrolyte has been discussed in detail. Samples of silver ion conducting solid polymer electrolyte were prepared by...

This paper introduces the implementation of a DC–AC step up isolated converter from associations of bidirectional Conversion Standard Cells (CSCs). The designed multi-cell converter is an array of standardized converter cells. It is described a...

In this paper, we develop a finite-difference time-domain (FDTD) model in which the time-evolving electrical conductivity of the air ionization plasma in DC voltage needed-plate setup is represented. Maxwell’s equations are solved using the FDT...

A novel DC-assisted fast hot-pressing (FHP) powder sintering technique was utilized to prepare Al/Diamond composites. Three series of orthogonal experiments were designed and conducted to explore the effects of sintering temperature, sintering pressu...

This paper presents the design, simulation, and experimental evaluation of a low-cost, fixed-step MPPT algorithm based on the incremental conductance technique for operation in a low-power photovoltaic (PV) system with a full-bridge DC-AC converter....

This paper analyzes the zero-voltage switching (ZVS) for all switches in a high-voltage-gain bidirectional DC–DC converter in triangular conduction mode (TCM) operation without any auxiliary components. From the ZVS condition, the reverse inductor cu...

Solar photovoltaic (PV) connection with the grid becomes more prevalent in distributed generation, and the DC grid contributes a significantly to the distributing system. The current study focuses on combining rooftop solar with the DC microgrid. A h...

This paper documents the manufacture and testing of a humidity sensor based on a combination of In₂O₃/SiO. A number of different sensor samples have been produced by thermal deposition and the effect of varying the vacuum pressure has also been inves...

This paper outlines the modeling and controller design of a novel two-stage photovoltaic (PV) micro inverter (MI) that eliminates the need for an electrolytic capacitor (E-cap) and input current sensor. The proposed MI uses an active-clamped current-...

A previous article has presented the members of the asymmetrical interleaved dc/dc switching converters family as very appropriate candidates to interface between photovoltaic or fuel cell generators and their loads because of their reduced ripple an...

In coastal hot and humid regions, the steel pin of AC porcelain insulators often suffers from severe electrochemical corrosion due to surface contamination and moisture, leading to insulator string breakage. Contrary to the common belief that AC corr...

Nanocomposites of polyvinylidene fluoride (PVDF) with dimensional (1D) cobalt oxide (Co₃O₄) and f-MWCNTs were prepared successfully by the solution casting method. The impact of 1D Co₃O₄ filler and 1D Co₃O₄/f-MWCNTs co-fillers on the structural, ther...

This study investigates the feasibility of using a wearable system with full-wave alternating current (AC) excitation to measure electrodermal activity (EDA). Typically measured using direct current (DC) excitation, EDA is often affected by signal dr...

Chitosan (CS) films doped with sodium triflate (NaTf) were prepared by the solution cast technique. The structural and morphological behaviors of the samples were examined by X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques....

This paper deals with the design, tuning and implementation of a digital controller for an all-Si electric vehicle (EV) on-board battery charger operated in discontinuous conduction mode (DCM). This charger consists of two cascaded conversion stages:...

Space charge injection in polypropylene (PP) significantly weakens the stability of HVDC cables. Impact polypropylene copolymer (IPC) is often used as insulation material for AC cables, but in the DC field, IPC has the problem of space charge accumul...

A novel asymmetrical interleaved dc/dc switching converters family intended for photovoltaic and fuel cell applications is presented in this paper. The main requirements on such applications are small ripples in the generator and load, as well as hig...

Transcranial direct current stimulation (tDCS) is a non-invasive neuromodulation technique to treat brain disorders by using a constant, low current to stimulate targeted cortex regions. Compared to the conventional tDCS that uses two large pad elect...

Field-Programmable Gate Array (FPGA) provides the possibility to design new “electromagnetic compatibility (EMC) friendly” control techniques for power electronic converters. Such control techniques use pseudo-random modulators (RanM) to...

A novel Performance Optimized Carrier Stored Trench Gate Bipolar Transistor (CSTBT) with Low Switching Loss has been proposed. By applying a positive DC voltage to the shield gate, the carrier storage effect is enhanced, the hole blocking capability...

This paper solves the buck–boost converter operation problem in the discontinuous conduction mode and the feeding a DC bus of a combined battery/solar-powered electric vehicle grid. Since the sun’s radiation has a very important effect on the perform...

This paper proposes a novel high voltage conversion gain DC/DC boost converter for renewable energy applications and systems. The proposed converter utilizes a three-winding coupled inductor. The presented converter benefits from a unique advantage,...

This work presents results of bulk conductivity and surface potential decay measurements on low-density polyethylene and its nanocomposites filled with uncoated MgO and Al₂O₃, with the aim to highlight the effect of the nanofillers on charge transpor...

The medium voltage DC (MVDC) type system can connect multiple terminals to a common MVDC bus, so it is possible to connect several renewable DC power sources to the common MVDC bus, but a DC circuit breaker is needed to isolate short circuit accident...

To design reliable high voltage cables, clean materials with superior insulating properties capable of operating at high electric field levels at elevated temperatures are required. This study aims at the electrical characterization of a byproduct-fr...

Porous TiO₂-doped polyaniline and polyaniline nanocomposite fibers prepared by the in situ polymerization technique using anionic surfactant in an ice bath were studied. The prepared nanocomposites were characterized by FTIR spectroscopy and XRD patt...

Power electronics has significantly contributed to advances in developing single-stage integrated converter topologies, enabling DC/AC conversion with voltage step-up capability in a compact and efficient structure. This work proposes a novel Integra...

This paper presents an optimized single-phase three-level boost DC-link cascade H-bridge multilevel inverter (TLBDCLCHB MLI) system to generate a seven-level stepped output voltage waveform for photovoltaic (PV) applications. The proposed TLBDCLCHB M...

Polypyrrole (PPy)-doped bismuth calcium manganite (BCM) nanocomposites were synthesized by chemical polymerization. The amorphous nature of the polypyrrole and the monoclinic crystal structure of the BCM particles (35–65 nm) were confirmed by v...

In this paper, we studied the discontinuous conduction modes (DCMs) of modified versions of the SEPIC, Ćuk, and Zeta converters. The modified versions of these converters were obtained by adding an extra diode to the classical versions of these...

CuMn_1−xMg_xO₂ (x = 0–0.06) polycrystalline samples were prepared using the hydrothermal method at T = 100 °C for 24 h in Teflon-line stainless steel autoclaves. The samples were crystallized, forming crednerite structures (C2/m space g...

The cooling characteristic curves in a heated ingot with a diameter of 100 mm quenched by a water jet were measured under different conditions. A two-dimensional calculation model was established to calculate the HTC of magnesium alloy ingot with wat...

The dielectric properties of epoxy/MWCNT (multi-walled carbon nanotubes)/MgO hybrid composites with a fixed MWCNT amount of 0.12 vol.% (0.2 wt.%) and varying MgO concentrations up to 3 vol.% were investigated in broad frequency (20–40 GHz) and...

This work introduces a generalized version of the pulse width modulation (PWM) switch model applied in the small-signal modeling of converters based on the multistate switching cell (MSSC) operating in discontinuous conduction mode (DCM). It consists...

This paper is aimed at making new proposals for developing future Electro-Magnetic Compatibility (EMC) standards tailored to DC microgrids in a frequency range between 9 and 500 kHz. In particular, new EMC proposals are made to reduce Electro-Magneti...

Insulation resistance is a vital factor in dry DC link capacitors (DCLCs), and crucially influences their voltage equalization and energy storage performance. However, at present, there is a lack of experimental observation on the insulation resistan...

A bipolar charge transport model is employed to investigate the remarkable reduction in dc conductivity of low-density polyethylene (LDPE) based material filled with uncoated nanofillers (reported in the first part of this work). The effect of temper...

This paper presents an assessment of the potential usefulness of the Ground Conductivity Meter (GCM) method to locate seepage pathways in the Maniow levee zone near Kraków, Poland. We have realized this aim through geological recognition of th...

Many recent studies have revealed that PoL (Point of Load) converters’ output capacitors are a paramount component from a reliability point of view. To receive the maximum degree of reliability in many applications, designers are often advised...

Ester-based insulation fluids are being increasingly used in high-voltage insulation systems. The reasons are the advantages in the area of ecological compatibility and resource-saving provision. The intention to use ester-based insulation fluids in...

The charge transport in polypropylene was studied under DC electric fields at different temperatures. By the experimental measurement and simulation of the BCT model, we studied conduction currents, breakdown strength, and space charge distribution....

Thin polypropylene films have played a strategic role in recent years because they are the dielectric of choice for high-energy-density and high-power-density DC-link capacitors, and have been extensively used in renewable energy and electric mobilit...

This paper focuses on the analysis of a new modulation method based on the reverse conduction of metal–oxide–semiconductor field-effect transistors (MOSFETs) for a three-phase voltage-feed full-bridge converter with two-switched transisto...