The two-step process including the deposition of the metal precursors followed by heating the metal precursors in a vacuum environment of Se overpressure was employed for the preparation of Cu(In,Ga)Se2 (CIGS) films. The CIGS films selenized at the r...
Magnetic nanoparticles (NPs) hold great promise for both fundamental research and future applications due to their unique structural features, high specific surface area, and tailored physical properties. Here, we present a convenient thermal co-evap...
In this paper, the performance of Cu-(In,Ga)-S2 (CIGS2) solar cells with adjusting composite [Cu]/([Ga] + [In]) (CGI)-ratio absorber was explored and compared through an improved three-stage co-evaporation technique. For co-evaporating CIGS2 absorber...
Thermal evaporation is a very successful and widely adopted coating technique for the deposition of organic and inorganic materials on rough and textured surfaces and over large areas. Indeed, this technique is extensively used in the semiconductor i...
Flux calibrations in multi-source thermal co-evaporation of thin films have been developed based on real-time spectroscopic ellipsometry (RTSE) measurements. This methodology has been applied to fabricate CuInSe2 (CIS) thin film photovoltaic (PV) abs...
In this study, as a novel approach to thin-film solar cells based on tin sulfide, an environmentally friendly material, we attempted to fabricate (Ge, Sn)S thin films for application in multi-junction solar cells. A (Ge0.42 Sn0.58)S thin film was pre...
Hf1−xSixO2 nanocomposites with different SiO2 doping ratios were synthesized using an ion-assisted co-evaporation process to achieve dense amorphous Hf1−xSixO2 coatings with low loss and a high laser-induced damage threshold (LIDT). The results showe...
In this work, we developed nanostructured Bi2Te3 and Sb2Te3 thin films by thermal co-evaporation of their alloys with corresponding pure elements (Bi, Sb, and Te). The films were fabricated on borosilicate glass at different substrate temperatures an...
Cu2Sn1-xGexS3 (CTGS) is a compound composed of relatively abundant elements in the crust of the earth. The band gap of CTGS can be tuned by substituting elements at the Sn and Ge sites, making it an attractive material for low-environmental-impact so...
New oral tablets of nebivolol have been developed aiming to improve, by cyclodextrin (CD) complexation, its low solubility/dissolution properties—the main reason behind its poor/variable oral bioavailability. Phase-solubility studies, performed...
BX795 is a TANK binding kinase-1 inhibitor that has shown excellent therapeutic activity in murine models of genital and ocular herpes infections on topical delivery. Currently, only the BX795 free base and its hydrochloride salt are available commer...
In order to improve the sensitivity and to reduce the working temperature of the CH4 gas sensor, a novel 1D nanostructure of CuO-doped In2O3 was synthesized by the co-evaporation of Cu and In granules. The samples were prepared with changing the weig...
Amphiphilic ion-pairs of kanamycin (KAN) were prepared by evaporation of a water-ethanol co-solution of KAN base and a lipoamino acid bearing a 12-carbon atoms alkyl side chain (LAA12), at different molar ratios. Infrared spectroscopy confirmed the...
Kesterite-structured Cu2ZnSnSe4 (CZTSe) is considered as one of the Earth-abundant and non-toxic photovoltaic materials. CZTSe films have been prepared using a single-step co-evaporation method at a relatively low temperature (i.e., below 500 °C)...
Real time spectroscopic ellipsometry (RTSE) has been applied for in-situ monitoring of the first stage of copper indium-gallium diselenide (CIGS) thin film deposition by the three-stage co-evaporation process used for fabrication of high efficiency t...
The study aims to assess the interaction between fluconazole and sulfonatocalix[4]naphthalene towards enhancing its dissolution performance and antimycotic activity. A solubility study was carried out at different pH conditions, and the results revea...
The interaction between meloxicam and sulfonatocalix[4]naphthalene was investigated to improve the meloxicam solubility and its dissolution performance. Solubility behavior was investigated in distilled water (DW) and at different pH conditions. Besi...
Hydrochlorothiazide (HCT), a Biopharmaceutical Classification System (BCS) class IV drug, is characterized by low solubility and permeability, that negatively affect its oral bioavailability, reducing its therapeutic efficacy. The combined use of cyc...
The unexpected dissolution behaviour of amorphous diflunisal-chitosan solid dispersions (kneading method) with respect to the crystalline co-evaporated systems is the starting point of this research. This work is an in-depth study of the diflunisal r...
The typical structure of high efficiency Cu(InGa)Se2 (CIGS)-based thin film solar cells is substrate/Mo/CIGS/CdS/i-ZnO/ZnO:Al(AZO) where the sun light comes through the transparent conducting oxide (i.e., i-ZnO/AZO) side. In this study, the thickness...
Over the last two decades, thin film solar cell technology has made notable progress, presenting a competitive alternative to silicon-based solar counterparts. CIGS (CuIn1−xGaxSe2) solar cells, leveraging the tunable optoelectronic properties o...
The influence of substrate type in boosting thermoelectric properties of co-evaporated Bi2Te3 and Sb2Te3 films (with 400 nm-thick) is here reported. Optimized power factor values are 2.7 × 10−3 W K−2 m−1 and 1.4 × 10−3 W K−2 m−1 for flexible Bi2Te3 a...
Heterojunction Cu(In,Ga)Se2 (CIGS) solar cells comprise a substrate/Mo/CIGS/CdS/i-ZnO/ZnO:Al. Here, Al-doped zinc oxide (AZO) films were deposited by magnetron sputtering, and the substrate temperature was optimized for CIGS solar cells with two type...
Chalcogenide glass is an optical material with excellent mid-infrared and far-infrared penetration properties. The silver-doped Ge28Sb12Se60 (GSS) chalcogenide films in this paper were deposited on a glass substrate by the co-evaporation technique. A...
This paper describes the elemental and phase composition, microstructure, and superconducting properties of Nb3Sn deposited by magnetron sputtering. The films were deposited on sapphire substrates using three different techniques: co-evaporation, lay...
In this paper, the top-contact (TC) pentacene-based organic thin-film transistor (OTFT) with a tetrafluorotetracyanoquinodimethane (F4TCNQ)-doped pentacene interlayer between the source/drain electrodes and the pentacene channel layer were fabricated...
In this review, we discuss the basic concepts related to (co-)evaporation and (co)sputtering based fabrication methods and the electrical properties of polymer-metal nanocomposite films. Within the organic-inorganic hybrid nanocomposites research fra...
Gemfibrozil (GEM) is a hypolipidemic agent, which is effective in reducing serum cholesterol and triglyceride levels. Complexation of GEM with native β-cyclodextrin (β-CD) and with the derivatives hydroxypropyl-β- and randomly methylat...
Thin films of Cd1−xMgxO (CdMgO) (0 ≤ x ≤ 1) were investigated by depositing the films on glass substrates using the co-evaporation technique. The structural, surface morphological, optical, and electrical characteristics of these films were studied a...
In this work we have fabricated hydrogen gas sensors based on undoped and 1 wt% multi-walled carbon nanotube (MWCNT)-doped tungsten oxide (WO3) thin films by means of the powder mixing and electron beam (E-beam) evaporation technique. Hydrogen sensin...
In this study, we investigated the luminous properties of undoped cesium iodide (CsI) and Na-doped CsI (CsI:Na) films deposited by thermal vacuum evaporation and treated with different substrate temperatures, post-annealing temperatures, and depositi...
In the current study, the development of mucoadhesive tablets for buccal delivery of a non-steroidal anti-inflammatory drug was investigated. Binary complexes with piroxicam and cyclodextrins (β-cyclodextrin (β-CD), methylated-β-cyclod...
Solid dispersions and physical mixtures of dimenhydrinate (I) in polyethylene glycol 6000 (PEG 6000) and urea were prepared by co-evaporation (or solvent) and fusion-solvent method to increase its aqueous solubility. In contrast to the very slow diss...
The use of iodine as antiseptic poses some issues related to its low water solubility and high volatility. Stable solid iodine-containing formulations are highly advisable and currently limited to the povidone-iodine complex. In this study, complexes...
The encapsulation of insoluble compounds can help improve their solubility and activity. The effects of cyclodextrin encapsulation on hesperetin’s derivatives (HHSB, HIN, and HTSC) and the physicochemical properties of the formed complexes were...
The quest for single-stage deposition of CuInGaSe2 (CIGS) is an open race to replace very effective but capital intensive thin film solar cell manufacturing processes like multiple-stage coevaporation or sputtering combined with high pressure selenis...
Thermal evaporation is an important technique for fabricating methylammonium lead iodide (MAPbI3), but the process is complicated by the need to co-evaporate methylammonium iodide (MAI) and PbI2. In this work, the effect of water vapor during the the...
This study aims to improve the dissolution rate of ketoprofen by preparing multicomponent crystals with tromethamine. The multicomponent crystals (equimolar ratio) of ketoprofen and tromethamine were prepared by the solvent co-evaporation method. The...
In this work, we have investigated the photocurrent and spectral sensitivity of the silicon/SrTiO3:xNb/perovskite structures. The sol–gel method carried out the deposition of undoped SrTiO3 layers as well as niobium-doped (SrTiO3:Nb) layers at...
Replacing conventional electrode materials is one of the most pressing challenges for next-generation lithium-ion batteries since state-of-the-art systems have almost reached their limitations for performance gains. For anodes, ambitious candidates i...
Resibufogenin (RBG) is a natural medicinal ingredient with promising cardiac protection and antitumor activity. However, poor solubility and severe gastric mucosa irritation restrict its application in the pharmaceutical field. In this study, the inc...
Background: Fenoprofen calcium dehydrate (FCD) is counted as a non-steroidal, anti-inflammatory, anti-arthritic drug. FCD is slightly water soluble. It is indicated for mild pain relief, where the suggested dosage is 200 mg orally every 4 to 6 h. Aim...
Inorganic halide perovskites have garnered significant attention as promising candidates for photovoltaic and optoelectronic applications, owing to their enhanced thermal and chemical stability relative to hybrid perovskite materials. This review syn...
Isopentyl caffeate (ICaf) is a bioactive ester widely distributed in nature. Our patented work has shown promising results of this molecule against Leishmania. However, ICaf shows poor solubility, which limits its usage in clinical settings. In this...
Indium sulfide (InxSy)—besides CdS and Zn(O,S)—is already used as a buffer layer in chalcopyrite-type thin-film solar cells and modules. We discuss the influence of the substrate temperature during very fast magnetron sputtering of InxSy buffer layer...
The aim of the study was to determine the feasibility of complexation between the antioxidant trans-resveratrol (RSV) and underivatized cyclodextrins (CDs) using a variety of preparative methods, including physical mixing, kneading, microwave irradia...
The concept of bandgap science of organic semiconductor films for use in photovoltaic cells, namely, high-purification, pn-control by doping, and design of the built-in potential based on precisely-evaluated doping parameters, is summarized. The prin...
Although niflumic acid (NA) is one of the most used non-steroidal anti-inflammatory drugs, it suffers from poor solubility, low bioavailability, and significant adverse effects. To address these limitations, the complexation of NA with cyclodextrins...
Cu(In,Ga)Se2 (or CIGS) thin films and devices were fabricated using a modified three-stage process. Using high deposition rates and a low temperature during the process, a copper chloride vapor treatment was introduced in between the second and third...
Nonstoichiometric GeSixOy glass films and many-layer structures based on them were obtained by high-vacuum electron beam vapor deposition (EBVD). Using EBVD, the GeO2, SiO, SiO2, or Ge powders were co-evaporated and deposited onto a cold (100 °C)...