579 Results Found

High-temperature phosphate adhesives are widely used in the aerospace and nuclear power industries. However, complex residual stresses can result when the curing temperature parameters are unreasonable due to the brittleness of the adhesive. To revea...

The fiber-like bis-(dimethylglyoximato) nickel(II) complex, Ni(DMG)2 was successfully synthesized. The obtained samples were characterized by SEM-EDS, FT-IR, XRD, and XPS. The TG-DSC-FTIR-MS coupling technique was used to characterize the thermal dec...

Thermal decomposition of solids often includes simultaneous occurrence of the overlapping processes with unequal contributions in a specific physical quantity variation during the overall reaction (e.g., the opposite effects of decomposition and evap...

Recent incidents of fire accidents attributed to oil combustion have emerged as a significant threat to both industrial safety and environmental conservation. In this study, the thermal oxidation and thermal analysis kinetics parameters of transforme...

SiO2-based organic-inorganic hybrids (OIHs) are versatile materials whose properties may change significantly because of their thermal treatment. In fact, after their preparation at low temperature by the sol-gel method, they still have reactive sila...

New heterotrinuclear complexes with the general formula [Cu2Ln(H2L)(HL)(NO3)2]·MeOH (Ln = Ho (1), Er (2), H4L = N,N′-bis(2,3-dihydroxybenzylidene)-1,3-diaminopropane) were synthesized using compartmental Schiff base ligand in conjugation...

To grasp the decomposition reaction rule of calcium carbonate in cement raw material, the thermogravimetric analyzer (TG), derivative thermogravimetric (DTG), and differential scanning calorimeter (DSC) were used for analysis. Calcium carbonate sampl...

The calcium hydroxide (Ca(OH)2) content is one of the main indices of cement hydration degree. In order to accurately determine the calcium hydroxide content of ethylene and vinyl acetate (EVA) copolymer-modified cement paste, a dual atmosphere therm...

In the presented study, an attempt was made to investigate the most important attributes of solid lipid microparticles (SLM) using thermal analysis (DSC/TG) in order to determine the importance of this technique in the research and development of lip...

Recently, carbon nanotubes (CNTs) have been used extensively to develop new materials and devices due to their specific morphology and properties. The reinforcement of different metal oxides such as zinc oxide (ZnO) with CNT develops advanced multifu...

Peat is a resource used for heat and energy, particularly in countries where peat is abundant and conventional fuels are not available. Some countries have made extensive use of peat resources to produce electricity and heat in addition to light hydr...

Zeolitic imidazolate frameworks (ZIFs) are interesting materials for use in several aspects: energy storage material, gas sensing, and photocatalysis. The thermal stability and pyrolysis process are crucial in determining the active phase of the mate...

To produce Na2SnO3, which is widely used in the ceramics and electroplating industries, a novel process for the preparation of sodium stannate from cassiterite concentrates was developed successfully by the authors’ group. It was found that sod...

Achieving high thermal stability and control of supramolecular organization of functional dyes in sensors and nonlinear optics remains a demanding task. This study was aimed at the evaluation of thermal behavior and Langmuir monolayer characteristics...

To improve combustion efficiency and anti-oxidation property of aluminum nanoparticles (ANs), surface nitridation of ANs was performed in a pipe furnace under the protection of nitrogen gas in a glove-operation hermetic box via an off-line nitridatio...

Rearrangement reactions are efficient strategies in organic synthesis and contribute enormously to the development of energetic materials. Here, we report on the preparation of a fused energetic structure of 7-nitro-3,5-dihydro-4H-pyrazolo[4,3-d][1,2...

The purpose of this study was to evaluate the effects of sintering temperature and sintering time on mineral composition of high-alite white Portland cement clinker and hydration activity of the clinker. Effects of sintering temperature and sintering...

To overcome the issue of multidrug resistant (MDR) microbes, the exploration of ways to improve the antimicrobial efficiency of existing antibiotics is one of the promising approaches. In search of synthons with higher efficiency, in current investig...

Three new silica-based glass formulations with low molar Ca/P ratio (2–3) have been synthesized. The thermal properties, the crystalline phases induced by thermal treatments and the sintering ability of each glass formulation have been investigated b...

Heated tobacco products (HTPs) frequently induce user discomfort due to high mainstream smoke temperatures. To address this challenge and improve the inhalation experience, this experiment designed and prepared a cage-shaped braided tube as the cooli...

This study aimed to investigate the possibility of using biomass fly ash as a cement additive after hydrothermal modification. The treatment of biomass fly ash involves additional milling and curing under various hydrothermal conditions. Variation of...

In this study, a variety of industrial solid wastes, including petroleum coke desulfurization slag, fly ash and carbide slag with natural resource bauxite, were used as raw materials to prepare high belite suphoaluminate cement, which contains a cert...

The study examined the possibility of intercalation of montmorillonite with neomycin in an aqueous drug solution and the factors influencing the effectiveness of this process, such as the ion exchange capacity and process conditions, including the ti...

This paper reports the influence of submicron hydrophilic fibers on the hydration and microstructure of Portland cement paste. Submicron fibrillated cellulose (SMC) fibers was prepared by the acid hydrolysis of cotton fibers in H2SO4 solution (55% v/...

This study details the investigation of a black powder potential ore that was first obtained from Jiangxi, China. Its species, composition, and morphology are unknown. Preliminary tests revealed that the silica (SiO2) content of this ore is >70%....

High-calcium fly ash (HCFA), produced from the lignite combustion, has emerged as a global concern due to its fine particle size and adverse environmental impacts. This study presents the characteristics of dispersed microspheres from HCFA obtained u...

Rapeseed is a valuable oilseed crop, and efficient drying plays a crucial role in preserving its quality. Because of the high moisture content in rapeseed, drying using the conventional methods may cause it to overheat. The benefit of energy-efficien...

The moisture content (MC) of wheat seeds must be reduced before storage using appropriate dehydration processes. Desiccant drying is a promising alternative to conventional drying methods because it improves seed quality while providing overall energ...

The large amount of boron-bearing iron tailings in China is a resource for metals that needs to be more completely and efficiently utilized. In this evaluation, the ammonium sulfate roasting process was used to make a controllable phase transformatio...

Adverse side-effects occurred in slurry foaming and thickening process when carbide slag was substituted for quicklime in HCS-AAC. Cement accelerators were introduced to modify the slurry foaming and coagulating process during pre-curing. Meanwhile,...

A biomimetic solution technology for producing a photocatalytic material in the form of biomorphic titanium oxide fibers with a hierarchical structure using short flax fiber as a biotemplate is proposed. The impregnation of flax fibers intensified un...

A polymer of tetrafluoroethylene, hexafluoropropylene, and vinylidene fluoride- (THV) based reactive materials (RMs) was designed to improve their density and energy release efficiency. The mechanical performances, fracture mechanisms, thermal behavi...

The precipitation of struvite from wastewater is a potential alternative for the recovery of nutrients, especially phosphorus, which is an essential macronutrient for agriculture but can be harmful to the environment when improperly disposed of in wa...

In the proposed study, agro-waste biomass oat straw (OS) was considered a potential adsorbent for Cu(II), Zn(II), and Se(IV) removal from aqueous solutions. In order to obtain material with better adsorption abilities, the OS was modified by a deep e...

Removal of para-nitrophenol (p-NP) from an aqueous solution was studied under various batch adsorption experiments, using alumina (Al2O3) and its composite hexadecyltrimethylammonium bromide (HDTMA+-Br−) as adsorbents. These were later characte...

A new structural type for melt cast materials was designed by linking nitrotetrazole ring with 1,2,4-oxadiazole through a N-CH2-C bridge for the first time. Three N-CH2-C linkage bridged energetic compounds, including 3-((5-nitro-2H-tetrazol-2-yl) me...

When the Al/Ta/PTFE reactive material was sintered at 360 °C in a vacuum sintering furnace, it was found that the material reacted to form a soft fluffy white substance and carbon black. To explore the reaction process further, powder samples of...

The present study provides a fundamental understanding of the mechanism of action of special new phosphate glass (P-glass) systems, having different glass transition temperatures (Tg), in polyamide 66 (PA66). Dynamic mechanical analysis (DMA) reveale...

Iron red, a traditional Jingdezhen overglaze color, is primarily colored with iron oxide (Fe2O3). In traditional processes, the main ingredient for the iron red overglaze color, raw iron red, is produced by calcining iron vitriol (FeSO4·7H2O)....

Fluorinated graphene contains F atoms with high levels of chemical activity, and the application of fluorinated graphene in energetic materials may greatly contribute to the progress of combustion reactions. However, there is a lack of research on th...

The alkali-activated blast furnace slag is attracting significant attention in replacing Portland cement due to several characteristics similar to cement hydration. However, there are a few practical problems with commercial alkali activators, such a...

This paper reports a novel procedure to fabricate multilayer composite biofilms based on halloysite nanotubes (HNTs) and sustainable polymers. Among the biopolymers, the non-ionic (hydroxypropyl cellulose) and cationic (chitosan) molecules were selec...

3D-printed biomedical polylactic acid (PLA) scaffolds were developed, and their biodegradation, as well as their thermomechanical behavior, were studied in a relevant in vitro environment. The scaffold’s biodegradability profile has been monito...

Monitoring of molding processes is one of the most challenging future tasks in polymer processing. In this work, the in situ monitoring of the curing behavior of highly filled EMCs (silica filler content ranging from 73 to 83 wt%) and the effect of f...

This review addresses the impact of different nanoadditives on the glass transition temperature (Tg) of polyvinyl chloride (PVC), which is a widely used industrial polymer. The relatively high Tg limits its temperature-dependent applications. The obj...

The aim of the work was to examine the possibility of using modified halloysite nanotubes as a gentamicin carrier and to determine the usefulness of the modification in terms of the effect on the amount of the drug attached, its release time, but als...

In this work is presented the complete thermal analysis of polyols by direct methods such as simultaneous thermogravimetric and differential thermal analyzer (TGA-DTA), differential scanning calorimetry (DSC), modulated DSC (MDSC), and supercooling M...

The microstructure and performance of magnesium potassium phosphate cement (MKPC), a kind of magnesium phosphate cement (MPC), are determined by the hydration products. In this paper, the hydration behavior of MKPC is investigated through various mat...

The dielectric relaxation dynamics in polymer composites critically determine their functional performance in advanced electrical systems. This study systematically investigates hybrid epoxy composites comprising neat epoxy resin (EP) and paper-reinf...

Reliable interpretation of the changes occurring in the samples during their heating is ensured by using more than one measurement technique. This is related to the necessity of eliminating the uncertainty resulting from the interpretation of data ob...