3,564 Results Found

The design of novel materials to use simultaneously in an ocular system for driven therapeutics and wound healing is still challenging. Here, we produced nanocomposites of tungsten disulfide carriers with spherical cobalt ferrite nanoparticles (NPs)...

Exploring anode materials with an excellent electrochemical performance is of great significance for supercapacitor applications. In this work, a N-doped-carbon-nanofiber (NCNF)-supported Fe3C/Fe2O3 nanoparticle (NCFCO) composite was synthesized via...

In this work, C@Fe3O4 magnetic microspheres were designed and prepared by a novel strategy, and the microwave absorption properties of the materials were investigated. Four kinds of monodisperse P(MAA/St) microspheres with different carboxyl content...

This work is devoted to the study of magnetic Fe3O4 nanoparticles doubly coated with carbon. First, Fe3O4@C nanoparticles were synthesized by thermal decomposition. Then these synthesized nanoparticles, 20–30 nm in size were processed in a solu...

Magnetically recyclable C-doped TiO2/Fe3O4 (C-TiO2/Fe3O4) nanocomposite was successfully synthesized via a sol–gel method. The synthesized samples were characterized using SEM, energy-dispersive X-ray spectroscopy (EDS), FTIR, and UV-VIS diffus...

The use of nanostructure materials as heterogeneous catalysts in the synthesis of organic compounds have been receiving more attention in the rapid developing area of nanotechnology. In this review, we mainly focused on our own work on the synthesis...

In this work, a batch of novel ternary hybrids (SiC@C-Fe3O4), characterized by SiC nanowires core, carbon shell, and adhered Fe3O4 nanoparticles were controllably synthesized via surface carbonization of SiCnw followed by hydrothermal reaction. Carbo...

Arsenic (As(V)), a highly toxic metalloid, is known to contaminate wastewater and groundwater and is difficult to degrade in nature. However, the development of highly efficient adsorbents, at a low cost for use in practical applications, remains hig...

Fe3O4@C nanoparticles were prepared by an in situ, solid-phase reaction, without any precursor, using FeSO4, FeS2, and PVP K30 as raw materials. The nanoparticles were utilized to decolorize high concentrations methylene blue (MB). The results indica...

In this study, we reported facile synthesis of Fe3O4/C composite and its application for the cost-effective and sensitive determination of tryptophan (Trp) in human serum samples. Fe3O4/C composites were prepared by a simple one-pot hydrothermal meth...

This study presents a novel Fe3O4/C composite material synthesized from red mud through a process of magnetic roasting and separation. The research explores the impact of Fe3O4/C dosages, sodium persulfate (PS) concentrations, and initial solution pH...

Fe2+-H2O2 Fenton system is widely applied in water treatment nowadays, but the acidification and sludge generation are crucial problems to be solved. Herein, we report that Fe3O4/TiO2/C nanocomposites (FTCNCs) were able to catalyze the decomposition...

Multilayered core–shell Fe3O4-SnO2-C nanoparticles were prepared via surface treatment and carbonization at atmospheric pressure. Fe3O4-SnO2 nanoparticles were prepared by the carboxylation of the pivotal particles (Fe3O4) with an anionic surfactant...

Ferroferric oxide (Fe3O4) is regarded to be a promising high-capacity anode material for LIBs. However, the capacity attenuates fast and the rate performance is poor due to the dramatic pulverization and sluggish charge transfer properties. To solve...

In this study Fe3O4@C matrix was obtained by combustion method and used hereafter as adsorbent for paracetamol and acetylsalicylic acid removal from aqueous solutions. The Fe3O4@C matrix was characterized by electronic microscopy, X-ray diffraction,...

Magnetite nanoparticles (Fe3O4 NPs) have been intensively investigated because of their potential biomedical applications due to their high saturation magnetization. In this study, core–shell Fe3O4@C NPs (core = Fe3O4 NPs and shell = amorphous...

A method of microalgae-templated spray drying to develop hierarchical porous Fe3O4/C composite microspheres as anode materials for Li-ion batteries was developed. During the spray-drying process, individual microalgae serve as building blocks of rasp...

Magnetic materials with intriguing structural and functional modifications demonstrate broad application potential in various fields, including drug delivery, absorption, extraction, separation, and catalysis. In particular, the catalytic hydrogenati...

In this paper, a simple and environmentally friendly method was developed for the preparation of highly stable C@Fe3O4 composites with controllable morphologies using sodium alginate as the carbon source and the easily obtained α-Fe2O3 as the p...

Realizing the high molecular orientation and structurally ordered microstructure of organic semiconductor polymer thin films is beneficial for enhancing the charge transport of conjugated polymers and achieving high-performance organic electronic dev...

The C spheres synthesized by a hydrothermal method were used as a C source, which was doped with LaFeO3 to obtain C-LaFeO3 composites with different C contents (5%, 10%, 15%, and 20%). The effects of C content on the structure, morphology, and photoe...

Carbon encapsulated Fe2O3 nanoparticles (C@Fe2O3) were successfully synthesized via a facile and environmentally friendly hydrothermal method and prototyped in anode materials for sodium ion batteries (SIBs). High-resolution transmission and scanning...

S-scheme Fe2O3/g–C3N4 heterojunctions were successfully fabricated by the ultrasonic assistance method to remove norfloxacin (NOR) under visible light irradiation. The synthesized catalysts were well studied through various techniques. The obta...

Lithium-oxygen batteries have attracted considerable attention in the past several years due to their ultra-high theoretical energy density. However, there are still many serious issues that must be addressed before considering practical applications...

Fe2O3/g-C3N4 nano-heterostructures for photocatalytic degradation of NOR (norfloxacin) were successfully prepared by combining co-precipitation and calcination methods. The g-C3N4, Fe2O3, and different composite ratios of Fe2O3/g-C3N4 (FeCNs) were ch...

Controlling defects and interfaces in composite absorbers can effectively regulate electromagnetic (EM) parameters and enhance the electromagnetic wave (EMW) absorption ability, but the mechanism still needs to be further elucidated. In this study, Z...

In this work, a novel adsorbent called magnetite/MXene (Fe3O4/Ti3C2) nanocomposite was prepared, characterized, and applied for the removal of organic dye, malachite green dye (MG), from both real water and model solutions. Numerous techniques were u...

Compared with conventional Fenton processes, the electro-Fenton process consumes fewer chemicals and produces less sludge, as it can generate the required Fenton’s reagents in situ. In this work, an electro-Fenton reactor was constructed to tre...

In this study, α-Fe2O3@g-C3N4 photocatalyst was synthesized using an ultrasonic assisted self-assembly preparation method. The α-Fe2O3@g-C3N4 photocatalyst had a stronger optical absorption in the visible light region than pure graphitic...

Mesoporous LaFeO3/g-C3N4 Z-scheme heterojunctions (LFC) were synthesized via the incorporation of LaFeO3 nanoparticles and porous g-C3N4 ultrathin nanosheets. The as prepared LFC were characterized by transmission electron microscopy, scanning electr...

This study describes the preparation of graphitic carbon nitride (g-C3N4), hematite (α-Fe2O3), and their g-C3N4/α-Fe2O3 heterostructure for the photocatalytic removal of methyl orange (MO) under visible light illumination. The facile hydr...

In sustainable hydrogen generation, photoelectrochemical (PEC) water splitting stands as a crucial technology, offering solutions to the global energy crisis while tackling environmental challenges. PEC water splitting relies on metal oxide nanostruc...

A new type of magnetic nanomaterial with Fe3O4 as the core and organic polymer as the shell was synthesized by seed emulsion polymerization. This material not only overcomes the problem of insufficient mechanical strength of the organic polymer, it a...

A prepared FeZnNa@SiO2-C catalyst with graphitized carbon (C)-modified mesoporous SiO2 supports metal nanoparticles with the sol–gel method. The effect of adding metal Na and Zn promoters as a dispersion on the CO2 hydrogenation to low olefins...

The binary heterostructured semiconducting visible light photocatalyst of the iron-doped graphitic carbon nitride/bismuth molybdate (Fe-g-C3N4/Bi2MoO6) composite was prepared by coupling with Fe-doped g-C3N4 and Bi2MoO6 particles. In the present stud...

Water pollution is an alarming and critical environmental challenge that demands immediate attention. In addition to this, the world is also facing an energy crisis of ever-increasing proportions. Managing these issues through a sustainable approach...

Hybrid reinforcement’s novel composite (Al-Fe3O4-SiC) via powder metallurgy method was successfully fabricated. In this study, the aim was to define the influence of SiC-Fe3O4 nanoparticles on microstructure, mechanical, tribology, and corrosio...

The g-C3N4 decorated magnesium ferrite (MgFe2O4) porous microspheres composites were successfully obtained via a one-step solvothermal method. The structure and morphology of the as-prepared MgFe2O4/g-C3N4 composites were characterized by the techniq...

The limited microwave-heating performance caused by moisture and ordinary aggregates limits the application efficiency of emulsified asphalt in rapid pavement repair engineering. Silicon carbide (SiC) and ferrosoferric oxide (Fe3O4) were introduced a...

In the present work, a facile one-step methodology was used to synthesize honeycomb-like BiFeO3/g-C3N4 composites, where the well-dispersed BiFeO3 strongly interacted with the hg-C3N4. The 10BiFeO3/hg-C3N4 could completely degrade RhB under visible l...

Abnormal protein phosphorylation in sweat metabolites is closely related to cancer, cardiovascular disease, and other diseases. The real-time monitoring of phosphoproteins in sweat is significant for early monitoring of disease biomarkers. Here, a hi...

This current study assessed the impacts of morphology adjustment of perovskite BiFeO3 (BFO) on the construction and photocatalytic activity of P-infused g-C3N4/U-BiFeO3 (U-BFO/PCN) heterostructured composite photocatalysts. Favorable formation of U-B...

The continuously increasing global impact of fungal infections is requiring the rapid development of novel antifungal agents. Due to their multiple pharmacological activities, thiourea derivatives represent privileged candidates for shaping new drugs...

Porous α-Fe2O3 nanowire arrays coated with a layer of carbon shell have been prepared by a simple hydrothermal route. The as-synthesized products show an excellent electrochemical performance with high specific capacitance and good cycling life...

Electrolysis and biological processes, such as fermentation and microbial electrolysis cells, offer efficient hydrogen production alongside wastewater treatment. This study presents a novel microbial electrolyzer (ME) comprising a titanium dioxide (T...

In this study, a novel Fe3O4/Ag3PO4/g-C3N4 magnetic composite photocatalyst was successfully synthesized, tailored specifically for the visible light-driven photocatalytic degradation of sulfonamide antibiotics, more precisely, sulfamethazine (SMZ)....

Oxidation of native iron in the mantle at a depth about 250 km and its influence on the stability of main carbon and nitrogen hosts have been reconstructed from the isothermal section of the ternary phase diagram for the FeO-Fe3C-Fe3N system. The res...

Hollow transition metal oxides have important applications in the degradation of organic pollutants by a photo-Fenton-like process. Herein, uniform, highly dispersible hollow CuFe2O4/C nanospheres (denoted as CFO/C-PNSs) were prepared by a one-pot ap...

The application of microwave heating technology can significantly enhance the water evaporation rate of emulsified asphalt mixtures post paving. To improve the microwave absorption and curing performance of these mixtures, SiC-Fe3O4 composite materia...

Three-component nanocomposites (Fe3O4/Pd/mpg-C3N4) have been systematically synthesized using a three-step solution method for the photocatalytic bacterial decontamination. The mesoporous g-C3N4 nanosheets (mpg-C3N4), which were prepared by the acid...