Skip to Content

198 Results Found

  • Article
  • Open Access
2 Citations
919 Views
17 Pages

5 December 2025

In recent years, there has been an increasing interest in studying multi-component alloys. A bulk solution-treated Ti50Ni41Cu7Co2 SMA was prepared and investigated. The functional properties, including phase transformation temperature, shape memory e...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
4 Citations
2,486 Views
13 Pages

Effect of the Surface Oxide Layer on Shape Memory Effect and Superelasticity of [011]-Oriented Ti-50.1Ni Single Crystals

  • Yuriy I. Chumlyakov,
  • Irina V. Kireeva,
  • Anastasia A. Saraeva,
  • Zinaida V. Pobedennaya and
  • Anna V. Vyrodova

11 November 2022

Effect of the surface oxide layer on the shape memory effect (SME) and superelasticity (SE) after marforming (deformation in the martensitic state, followed by annealing at 713 K for 0.5 h in an inert helium gas and in dry air) was investigated on Ti...

(This article belongs to the Special Issue Microstructure and Mechanical Behaviour of Shape Memory Alloys)
  • Article
  • Open Access
2,061 Views
21 Pages

15 July 2025

Loading and clamping schemes significantly influence the behavior of shape memory alloys, specifically, the course of their solid-state transformations. This paper presents experimental and numerical findings regarding the nonlinear response of sampl...

(This article belongs to the Special Issue Technology and Applications of Shape Memory Materials)
  • Article
  • Open Access
8 Citations
4,608 Views
14 Pages

Hydrogen Effect on the Cyclic Behavior of a Superelastic NiTi Archwire

  • Rihem Sarraj,
  • Amir Kessentini,
  • Tarek Hassine,
  • Ali Algahtani and
  • Fehmi Gamaoun

11 March 2019

In this work, we are interested in examining the strain rate effect on the mechanical behavior of Ni–Ti superelastic wires after hydrogen charging and ageing for 24 h. Specimens underwent 50 cycles of loading-unloading, reaching an imposed defo...

(This article belongs to the Special Issue Hydrogen Embrittlement of Metallic Materials: Past, Present and Future)
  • Feature Paper
  • Article
  • Open Access
15 Citations
3,971 Views
10 Pages

23 January 2022

The achievement of room-temperature (RT) superelasticity in a Ti-Mo-Al ternary alloy system through the addition of a relatively high concentration of Al to manipulate the phase stability of the ω phase is realized in this study. The compositio...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
2 Citations
2,855 Views
14 Pages

Molecular Dynamics Investigation on Grain Size-Dependent Superelastic Behavior of CuZr Shape Memory Alloys

  • Mixun Zhu,
  • Kai Wang,
  • Hongtao Zhong,
  • Huahuai Shen and ,
  • Yong Zhang,
  • Xiaoling Fu and
  • Yuanzheng Yang
  • + 2 authors+ 0 author

29 January 2025

The superelasticity of CuZr shape memory alloys (SMAs) originates from stress-induced transformations between the B2 (austenite) and B19’ (martensite) phases. Grain size is a key parameter affecting the superelasticity of shape memory alloys. P...

  • Review
  • Open Access
6 Citations
3,341 Views
24 Pages

Recent Developments in Ultrafine Shape Memory Alloys Using Amorphous Precursors

  • Sung-Hwan Hong,
  • Hae-Jin Park,
  • Gi-An Song and
  • Ki-Buem Kim

24 November 2023

In this review, we systematically reviewed the recent advances in the development of ultrafine shape memory alloys with unique shape memory effects and superelastic behavior using amorphous metallic materials. Its scientific contribution involves def...

(This article belongs to the Section Metals and Alloys)
  • Feature Paper
  • Article
  • Open Access
10 Citations
2,565 Views
15 Pages

Shape Memory Effect and Superelasticity of [001]-Oriented FeNiCoAlNb Single Crystals Aged under and without Stress

  • Yuriy I. Chumlyakov,
  • Irina V. Kireeva,
  • Zinaida V. Pobedennaya,
  • Philipp Krooß and
  • Thomas Niendorf

10 June 2021

The two-step ageing of Fe-28Ni-17Co-11.5Al-2.5Nb (at.%) single crystals under and without stress, leads to the precipitation of the γ′- and β-phase particles. Research has shown that γ–α′ thermoelastic martensitic transformation (MT), with shape memo...

(This article belongs to the Special Issue Structure, Texture and Functional Properties of Shape Memory Alloys)
  • Article
  • Open Access
7 Citations
3,101 Views
14 Pages

External-Field-Induced Phase Transformation and Associated Properties in a Ni50Mn34Fe3In13 Metamagnetic Shape Memory Wire

  • Zhen Chen,
  • Daoyong Cong,
  • Shilei Li,
  • Yin Zhang and ,
  • Shaohui Li,
  • Yuxian Cao,
  • Shengwei Li,
  • Chao Song,
  • Yang Ren and
  • Yandong Wang
  • + 5 authors+ 0 author

10 February 2021

Metamagnetic shape memory alloys exhibit a series of intriguing multifunctional properties and have great potential for applications in magnetic actuation, sensing and magnetic refrigeration. However, the poor mechanical properties of these alloys wi...

(This article belongs to the Special Issue Recent Development in Magnetic Shape Memory Alloys)
  • Article
  • Open Access
3 Citations
2,277 Views
15 Pages

5 November 2023

Cu–Sn shape-memory microw ires were fabricated by a glass-coated melt spinning method. Effects of Sn content on the microstructure and mechanical properties of microwires were investigated. The phase transforms from martensite to austenite with...

(This article belongs to the Section Entropic Alloys and Meta-Metals)
  • Article
  • Open Access
4 Citations
2,773 Views
13 Pages

Preparation and Characterization of Ni-Mn-Ga-Cu Shape Memory Alloy with Micron-Scale Pores

  • Kunyu Wang,
  • Zhiqiang Wang,
  • Yunlong Li,
  • Jie Zhu and
  • Zhiyi Ding

10 October 2024

Porous Ni-Mn-Ga shape memory alloys (SMAs) were prepared by powder metallurgy using NaCl as a pore-forming agent with an average pore size of 20–30 μm. The microstructure, phase transformation, superelasticity, and elastocaloric properties o...

  • Feature Paper
  • Article
  • Open Access
7 Citations
2,464 Views
9 Pages

Behavior of Inelastic and Plastic Strains in Coarse-Grained Ti49.3Ni50.7(at%) Alloy Deformed in B2 States

  • Dorzhima Zhapova,
  • Victor Grishkov,
  • Aleksandr Lotkov,
  • Victor Timkin and ,
  • Angelina Gusarenko and
  • Ivan Rodionov
  • + 1 author+ 0 author

29 April 2021

The regularities of the change in inelastic strain in coarse-grained samples of the Ti49.3Ni50.7 (at%) alloy are studied when the samples are given torsional strain in the state of the high-temperature B2 phase. During cooling and heating, the invest...

(This article belongs to the Special Issue Microstructure and Mechanical Properties of Titanium Alloys)
  • Article
  • Open Access
16 Citations
4,711 Views
14 Pages

Superelastic Behavior of Ti-Nb Alloys Obtained by the Laser Engineered Net Shaping (LENS) Technique

  • Damian Kalita,
  • Łukasz Rogal,
  • Piotr Bobrowski,
  • Tomasz Durejko and ,
  • Tomasz Czujko,
  • Anna Antolak-Dudka,
  • Eduard Cesari and
  • Jan Dutkiewicz
  • + 3 authors+ 0 author

23 June 2020

The effect of Nb content on microstructure, mechanical properties and superelasticity was investigated for a series of Ti-xNb alloys, fabricated by the laser engineered net shaping method, using elemental Ti and Nb powders. The microstructure of as-d...

(This article belongs to the Special Issue High Performance Nonferrous Alloys: Composition, Microstructure and Properties)
  • Review
  • Open Access
754 Views
25 Pages

16 July 2026

This review summarizes the development of Ti-based high-entropy and multi-principal element shape memory alloys (SMAs), with a particular focus on TiZrHfCoNiCu, TiHf(Zr)Ni(Pt)Pt, and TiPd-based systems. Alloy composition and heat treatment significan...

(This article belongs to the Special Issue Advanced Shape Memory Alloys: From Alloy Design to Functional Performance)
  • Article
  • Open Access
10 Citations
2,710 Views
11 Pages

Thickness Effects on the Martensite Transformations and Mechanical Properties of Nanocrystalline NiTi Wires

  • Gulsharat A. Baigonakova,
  • Ekaterina S. Marchenko,
  • Marina A. Kovaleva,
  • Ekaterina A. Chudinova and ,
  • Alex A. Volinsky and
  • Yi Zhang
  • + 1 author+ 0 author

14 December 2022

This paper studied the features of the martensitic transformations and mechanical properties of 40, 60, and 90 µm thick NiTi wires with nanocrystalline B2 structures. It was established that the wires were composites and consisted of a TiNi mat...

(This article belongs to the Section Nanofabrication and Nanomanufacturing)
  • Review
  • Open Access
29 Citations
6,841 Views
30 Pages

29 May 2024

Shape memory alloy (SMA), a type of smart material, is widely used in the design of reinforcement and repair, isolation, and shock absorption of building structures because of its outstanding characteristics, such as the shape memory effect (SME), su...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
4 Citations
2,895 Views
14 Pages

Martensitic Phase-Transforming Metamaterial: Concept and Model

  • Sosuke Kanegae,
  • Masayuki Okugawa and
  • Yuichiro Koizumi

25 October 2023

We successfully developed a mechanical metamaterial that displays martensitic transformation for the first time. This metamaterial has a bistable structure capable of transitioning between two stable configurations through shear deformation. The oute...

(This article belongs to the Special Issue Acoustic and Mechanical Metamaterials: Recent Advances)
  • Article
  • Open Access
65 Citations
18,534 Views
13 Pages

Two-Way Bending Properties of Shape Memory Composite with SMA and SMP

  • Hisaaki Tobushi,
  • Shunichi Hayashi,
  • Yoshiki Sugimoto and
  • Kousuke Date

1 September 2009

A shape memory composite (SMC) was fabricated with a shape memory alloy (SMA) and a shape memory polymer (SMP), and its two-way bending deformation and recovery force were investigated. The results obtained can be summarized as follows: (1) two kinds...

(This article belongs to the Special Issue Composite Materials)
  • Article
  • Open Access
11 Citations
3,245 Views
12 Pages

Realization of Large Low-Stress Elastocaloric Effect in TiZrNbAl Alloy

  • Bang-He Lv,
  • Hua-You Xiang,
  • Shang Gao,
  • Yan-Xin Guo and ,
  • Jin-Han Yang,
  • Nai-Fu Zou,
  • Xiaoli Zhao,
  • Zongbin Li,
  • Bo Yang and
  • Liang Zuo
  • + 7 authors+ 2 authors

14 February 2024

Seeking novel high-performance elastocaloric materials with low critical stress plays a crucial role in advancing the development of elastocaloric refrigeration technology. Here, as a first attempt, the elastocaloric effect of TiZrNbAl shape memory a...

(This article belongs to the Special Issue Synthesis, Applications and Characterization of Advanced Precious Metal Materials)
  • Review
  • Open Access
70 Citations
8,232 Views
14 Pages

Research Status and Prospect of Additive Manufactured Nickel-Titanium Shape Memory Alloys

  • Shifeng Wen,
  • Jie Gan,
  • Fei Li,
  • Yan Zhou and ,
  • Chunze Yan and
  • Yusheng Shi
  • + 1 author+ 0 author

11 August 2021

Nickel-titanium alloys have been widely used in biomedical, aerospace and other fields due to their shape memory effect, superelastic effect, as well as biocompatible and elasto-thermal properties. Additive manufacturing (AM) technology can form comp...

(This article belongs to the Special Issue Material Design and Defect Control for Metal Additive Manufacturing)
  • Article
  • Open Access
115 Citations
7,422 Views
22 Pages

Multi-Response Optimization of WEDM Process Parameters for Machining of Superelastic Nitinol Shape-Memory Alloy Using a Heat-Transfer Search Algorithm

  • Rakesh Chaudhari,
  • Jay J. Vora,
  • S. S. Mani Prabu,
  • I. A. Palani and ,
  • Vivek K. Patel,
  • D. M. Parikh and
  • Luis Norberto López de Lacalle
  • + 2 authors+ 0 author

18 April 2019

Nitinol, a shape-memory alloy (SMA), is gaining popularity for use in various applications. Machining of these SMAs poses a challenge during conventional machining. Henceforth, in the current study, the wire-electric discharge process has been attemp...

(This article belongs to the Special Issue Machining—Recent Advances, Applications and Challenges)
  • Article
  • Open Access
112 Citations
9,353 Views
14 Pages

19 January 2020

Ti alloys have attracted continuing research attention as promising biomaterials due to their superior corrosion resistance and biocompatibility and excellent mechanical properties. Metastable β-type Ti alloys also provide several unique propert...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
815 Views
25 Pages

Features of the Structural Design of Welded Joints of Superelastic Nitinol Wires

  • Viktor Kvasnytskyi,
  • Anastasiia Zvorykina,
  • Leonid Zvorykin,
  • Constantine Zvorykin and
  • Yevgenia Chvertko

19 December 2025

The object of the study is a permanent joint of thin wires made of nitinol alloy. The problem of ensuring the formation of a joint of wires made of nitinol alloy was solved based on minimising changes in the structure of the welded joint material rel...

(This article belongs to the Section Metals and Alloys)
  • Feature Paper
  • Article
  • Open Access
6 Citations
3,590 Views
11 Pages

4 June 2021

The superelastic properties and stress-induced martensite (SIM) stabilization have been studied in a shape memory Ni51.1Fe16.4Ga26.3Co6.2 single crystal. The single crystal, characterized by a thermally induced forward martensitic transformation temp...

(This article belongs to the Special Issue Recent Development in Magnetic Shape Memory Alloys)
  • Article
  • Open Access
1 Citations
914 Views
14 Pages

The Effect of the Rolling Reduction Ratio on the Superelastic Properties of Ti-24Nb-4Zr-8Sn (wt%)

  • Oliver G. Reed,
  • Benjamin T. Desson,
  • Nicole L. Church and
  • Nicholas G. Jones

30 November 2025

Ti-Nb alloys have been under active consideration for superelastic applications in biomedical devices due to their superior biocompatibility compared to NiTi. However, these alloys have been found to be highly sensitive to processing conditions, with...

(This article belongs to the Special Issue Titanium Alloys: Processing, Properties and Applications)
  • Article
  • Open Access
21 Citations
4,374 Views
13 Pages

9 August 2019

The martensitic transformation and superelasticity of Ti49Ni51 shape memory alloy heat-treatment at different temperatures were investigated. The experimental results show that the microstructures of as-cast and heat-treated (723 K) Ni-rich Ti49Ni51...

(This article belongs to the Special Issue Structure and Mechanical Properties of Alloys)
  • Article
  • Open Access
13 Citations
3,070 Views
15 Pages

Effect of Process Parameters on Superelasticity of LPBF Ni-Rich Ni51.3Ti48.7 Shape Memory Alloy

  • Zheng Xiang,
  • Qin Yang,
  • Tianhao Zhang,
  • Xianfeng Shen and ,
  • Jie Chen and
  • Shuke Huang
  • + 1 author+ 0 author

25 August 2024

Laser powder bed fusion (LPBF) presents both opportunities and challenges with regard to the customisation of NiTi alloy properties. This paper presents a systematic study of the influence of process parameters on the superelasticity of LPBF Ni-rich...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
12 Citations
3,284 Views
17 Pages

5 November 2022

Severe plastic deformation via high-ratio differential speed rolling (HRDSR) was applied to the Ni-rich Ti-50.8Ni alloy. Application of HRDSR and a short annealing time of 5 min at 873 K leads to the production of a partially recrystallized microstru...

(This article belongs to the Special Issue Mechanical Behavior of Shape Memory Alloys: 2022)
  • Article
  • Open Access
16 Citations
3,400 Views
15 Pages

17 May 2021

The effect of ternary alloying elements (Mo and Ta) on the mechanical and superelastic properties of binary Ti-14Nb alloy fabricated by the mechanical alloying and spark plasma sintering was investigated. The materials were prepared in two ways: (i)...

(This article belongs to the Special Issue Novel Materials Synthesis by Mechanical Alloying/Milling)
  • Article
  • Open Access
1,182 Views
16 Pages

16 June 2025

In this study, the effect of aging heat treatment on the superelastic properties and microstructure of [001]-oriented Fe41Ni28Co17Al11.5Ti1.25Nb1.25 (at.%) single crystals was investigated using the cyclic superelastic strain test and a transmission...

(This article belongs to the Special Issue Technology and Applications of Shape Memory Materials)
  • Article
  • Open Access
4 Citations
3,570 Views
15 Pages

2 August 2021

The addition of superelastic NiTi particles is a great benefit to the toughness of the Ni-P coating. Nonetheless, NiTi nanopowder costs 10 times more than Ti nanopowder. Therefore, in the present study, to reduce the cost, Ni-P-NiTi composite coating...

(This article belongs to the Special Issue Feature Papers of Solids 2021)
  • Article
  • Open Access
8 Citations
2,736 Views
15 Pages

Mechanical and Magnetic Properties of Porous Ni50Mn28Ga22 Shape Memory Alloy

  • Xinyue Li,
  • Kunyu Wang,
  • Yunlong Li,
  • Zhiqiang Wang and ,
  • Yang Zhao and
  • Jie Zhu
  • + 1 author+ 0 author

29 February 2024

A porous Ni50Mn28Ga22 alloy was produced using powder metallurgy, with NaCl serving as the pore-forming agent. The phase structure, mechanical properties, and magnetic properties of annealed bulk alloys and porous alloys with different pore sizes wer...

(This article belongs to the Topic Microstructure and Properties in Metals and Alloys, 2nd Volume)
  • Article
  • Open Access
8 Citations
2,956 Views
11 Pages

In recent years, shape memory alloys (SMAs) have been applied in the vibration control of engineering structures due to their special properties such as super elasticity and high damping, and the study of the performance of SMA wires has been relativ...

(This article belongs to the Special Issue Advanced Composite Materials for Structure Strengthening and Resilience Improving)
  • Review
  • Open Access
35 Citations
8,962 Views
18 Pages

Development of High-Entropy Shape-Memory Alloys: A Review

  • Guoqiang Fu,
  • Xinnuo Liu,
  • Xiaoyang Yi,
  • Shangzhou Zhang and ,
  • Xinjian Cao,
  • Xianglong Meng,
  • Zhiyong Gao and
  • Haizhen Wang
  • + 3 authors+ 0 author

16 July 2023

High-entropy shape-memory alloys (HESMAs) exhibit unique properties, including high yield strength, a wide temperature range of phase transformation, and excellent thermal cycling stability, among others. Hence, they have broad prospects for research...

(This article belongs to the Section Entropic Alloys and Meta-Metals)
  • Article
  • Open Access
17 Citations
5,185 Views
11 Pages

Development of Biomimetic NiTi Alloy: Influence of Thermo-Chemical Treatment on the Physical, Mechanical and Biological Behavior

  • Elisa Rupérez,
  • José María Manero,
  • Luis-Alberto Bravo-González,
  • Eduardo Espinar and
  • F.J. Gil

24 May 2016

A bioactive layer, free of nickel, has been performed for its greater acceptability and reliability in clinical applications for NiTi shape memory alloys. In the first step, a safe barrier against Ni release has been produced on the surface by means...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
35 Citations
12,550 Views
20 Pages

11 February 2014

In this paper, the superelastic shape memory alloy (SMA) slit damper system as an alternative design approach for steel structures is intended to be evaluated with respect to inelastic behavior simulated by refined finite element (FE) analyses. Altho...

(This article belongs to the Special Issue Shape Memory Materials)
  • Article
  • Open Access
5 Citations
3,491 Views
14 Pages

Effect of Material Change on Stirnol Engine: A Combination of NiTiNOL (Shape Memory Alloy) and Gamma Stirling Engine

  • Humayun Arif,
  • Aqueel Shah,
  • Tahir Abdul Hussain Ratlamwala,
  • Khurram Kamal and
  • Maqsood Ahmed Khan

20 April 2023

Population explosion, industrialization, and urbanization have accelerated energy requirements across the globe. This has led to the human quest to find simple and cost-effective energy solutions. A promising solution is the revival of the Stirling e...

  • Article
  • Open Access
6 Citations
2,859 Views
22 Pages

Mechanical Response and Elastocaloric Performance of Ni-Ti Shape Memory Alloy Sheets Under Varying Strain Rates

  • Gianmarco Bizzarri,
  • Girolamo Costanza,
  • Ilaria Porroni and
  • Maria Elisa Tata

The optimization of elastocaloric cooling systems based on Shape Memory Alloys (SMAs) faces significant challenges in practical implementation. Despite promising thermomechanical properties, the development of efficient and compact cooling devices is...

(This article belongs to the Special Issue Feature Papers in Compounds (2025))
  • Article
  • Open Access
2 Citations
2,804 Views
18 Pages

Tailoring the Functional Properties of NiTi Shape Memory Alloy by Laser Powder Bed Fusion Process Conditions for 4D Printing

  • Stanislav V. Chernyshikhin,
  • Dmitry D. Zherebtsov,
  • Leonid V. Fedorenko,
  • Vladimir Yu. Egorov and ,
  • Viktor O. Filinov,
  • Stanislav O. Rogachev,
  • Andrey N. Urzhumtsev,
  • Ella L. Dzidziguri,
  • Maria V. Lyange and
  • Igor V. Shishkovsky
  • + 5 authors+ 0 author

Over the last decade, laser powder bed fusion (LPBF) received increased attention as a method of producing complex-shaped products from various materials. Recent results indicate the potential of this technology for the production of intermetallic Ni...

  • Article
  • Open Access
3 Citations
1,294 Views
21 Pages

Thermographic Investigation of Elastocaloric Behavior in Ni-Ti Sheet Elements Under Cyclic Bending

  • Saeed Danaee Barforooshi,
  • Gianmarco Bizzarri,
  • Girolamo Costanza,
  • Stefano Paoloni and ,
  • Ilaria Porroni and
  • Maria Elisa Tata
  • + 1 author+ 0 author

29 July 2025

Growing environmental concerns have driven increased interest in solid-state thermal technologies based on the elastocaloric properties of shape memory alloys (SMA). This work examines the elastocaloric effect (eCE) in Ni-Ti SMA sheets subjected to c...

(This article belongs to the Special Issue Technology and Applications of Shape Memory Materials)
  • Review
  • Open Access
19 Citations
6,038 Views
26 Pages

Research Progress of Fe-Based Superelastic Alloys

  • Zhenxin Li,
  • Yang Zhang,
  • Kai Dong and
  • Zhongwu Zhang

25 April 2022

In recent years, superelastic alloys have become a current research hotspot due to the large recoverable deformation, which far exceeds the elastic recovery. This will create more possibilities in practical applications. At present, superelastic allo...

(This article belongs to the Special Issue Mechanical Properties of Advanced Metallic Materials)
  • Article
  • Open Access
4 Citations
2,116 Views
16 Pages

Data-Driven Design of Nickel-Free Superelastic Titanium Alloys

  • Haodong Chen,
  • Wenjun Ye,
  • Songxiao Hui and
  • Yang Yu

13 April 2024

In this paper, a CatBoost model for predicting superelastic strains of alloys was established by utilizing features construction and selection as well as model filtering and evaluation based on 125 existing data points of superelastic titanium alloys...

  • Article
  • Open Access
12 Citations
6,381 Views
21 Pages

9 September 2024

This paper describes the design and experimental verification of a 6 m parabolic deployable mesh reflector antenna mechanism based on a superelastic shape memory alloy. This antenna mainly consists of a deployable primary reflector with a superelasti...

(This article belongs to the Section Astronautics & Space Science)
  • Article
  • Open Access
20 Citations
3,218 Views
20 Pages

Softening Effects in Biological Tissues and NiTi Knitwear during Cyclic Loading

  • Yuri F. Yasenchuk,
  • Ekaterina S. Marchenko,
  • Sergey V. Gunter,
  • Gulsharat A. Baigonakova and ,
  • Oleg V. Kokorev,
  • Alex A. Volinsky and
  • Evgeny B. Topolnitsky
  • + 2 authors+ 0 author

21 October 2021

Samples of skin, tendons, muscles, and knitwear composed of NiTi wire are studied by uniaxial cyclic tension and stretching to rupture. The metal knitted mesh behaves similar to a superelastic material when stretched, similar to soft biological tissu...

  • Article
  • Open Access
4 Citations
2,041 Views
12 Pages

The Cyclic Stability of the Superelasticity in Quenched and Aged Ni44Fe19Ga27Co10 Single Crystals

  • Ekaterina Timofeeva,
  • Elena Panchenko,
  • Maria Zherdeva,
  • Aida Tokhmetova and
  • Yuriy I. Chumlyakov

30 August 2023

The effect of aging (at 773 K for 1 h) on the cyclic stability of superelasticity was studied in preliminarily quenched (after annealing at 1448 K for 1 h) Ni44Fe19Ga27Co10 [001]-oriented single crystals. It was shown that NiFeGaCo single crystals (b...

(This article belongs to the Special Issue Metallic Functional Materials: Development and Applications)
  • Article
  • Open Access
35 Citations
4,525 Views
19 Pages

9 March 2020

Superelastic shape memory alloy (SMA) exhibits the ability to undergo large deformations before reverting back to its undeformed shape following the removal of the load. This unique property underlies its great potential in the seismic design and ret...

(This article belongs to the Special Issue Shape Memory Materials: New Design Concepts and Novel Materials)
  • Article
  • Open Access
7 Citations
997 Views
15 Pages

Influence of LPBF Parameters and Post-Annealing Temperature on Martensitic Transformation and Superelasticity of Ni-Rich Ni51.9Ti48.1 Alloy

  • Zheng Xiang,
  • Qin Yang,
  • Shengwang Zhang,
  • Tianhao Zhang and ,
  • Zhihui Xia,
  • Ming Huang,
  • Jie Chen and
  • Shuke Huang
  • + 3 authors+ 0 author

24 October 2025

Laser powder bed fusion (LPBF) technology offers an effective approach for fabricating high-performance superelastic NiTi alloys. This study achieved Ni51.9Ti48.1 alloys with outstanding superelastic properties through a triple optimization design of...

  • Article
  • Open Access
5 Citations
3,485 Views
15 Pages

Thermal Programming of Commercially Available Orthodontic NiTi Archwires

  • Andrea Wichelhaus,
  • Amelie Mehnert,
  • Thomas Stocker,
  • Uwe Baumert and ,
  • Matthias Mertmann,
  • Hisham Sabbagh and
  • Corinna L. Seidel
  • + 2 authors+ 0 author

11 May 2023

The shape of superelastic Nickel-Titanium (NiTi) archwires can be adjusted with thermal treatments using devices such as the Memory-MakerTM (Forestadent), which potentially affects their mechanical properties. The effect of such treatments on these m...

(This article belongs to the Section Smart and Functional Materials)
  • Article
  • Open Access
17 Citations
4,992 Views
19 Pages

A Multiscale Analysis on the Superelasticity Behavior of Architected Shape Memory Alloy Materials

  • Rui Xu,
  • Céline Bouby,
  • Hamid Zahrouni,
  • Tarak Ben Zineb and ,
  • Heng Hu and
  • Michel Potier-Ferry
  • + 1 author+ 0 author

17 September 2018

In this paper, the superelasticity effects of architected shape memory alloys (SMAs) are focused on by using a multiscale approach. Firstly, a parametric analysis at the cellular level with a series of representative volume elements (RVEs) is carried...

(This article belongs to the Special Issue Design of Alloy Metals for Low-Mass Structures)
  • Systematic Review
  • Open Access
5 Citations
2,138 Views
12 Pages

Nitinol Prosthesis in Stapes Surgery: Evolution from Heat-Activated to Superelastic Nitinol: A Systematic Review

  • Andrea Achena,
  • Ludovica Pacelli,
  • Carmine Prizio,
  • Gabriella Mantini and ,
  • Angelo Placentino,
  • Remo Accorona,
  • Valerio Valenzise,
  • Francesco Pilolli,
  • Giorgio Luigi Ormellese and
  • Alberto Dragonetti
  • + 6 authors+ 1 author

7 February 2025

Background/Objectives: Stapes surgery is a well-established treatment for conductive hearing loss caused by otosclerosis, with the choice of prosthesis playing a pivotal role in audiological outcomes and safety. Heat-activated and superelastic nitino...

(This article belongs to the Special Issue Clinical Diagnosis and Surgical Strategies Update on Ear Disorders)

of 4