The development of acid separation membranes is important. Silica-based reverse osmosis (RO) membranes for sulfuric acid (H2SO4) solution separation were developed by using a counter diffusion chemical vapor deposition (CVD) method. Diphenyldimethoxy...
In tire tread applications, achieving enhanced abrasion resistance, wet grip, and rolling resistance is crucial for optimizing overall performance. To realize improvements in these attributes for silica-filled tire tread compounds, it becomes imperat...
Low-calcium fly ash-based geopolymer concrete is generally reported to be less vulnerable to alkali-silica reaction (ASR) than conventional ordinary Portland cement concrete. However, the lack of understanding of pore solution composition of the low-...
The fumed silica influence on the morphology, coagulation processes, and rheological properties of suspensions in dimethyl sulfoxide (DMSO) and polyacrylonitrile (PAN)–DMSO solutions has been studied for the production of composite films and fi...
In this research work, silica nanoparticles and silica-gentamicin nanostructured solution were synthesized by using the microwave-assisted synthesis, in basic medium, using two silane precursors (tetraethylorthosilicate and octyltriethoxysilane) and...
Cement cracks are one of the most common failures in oil and gas wells. Cracks can reduce cement strength, resulting in a loss of zonal isolation and fluid leak. Placement of gels of nanoparticles (NPs) in the cracks is considered as a promising solu...
In a sol–gel co-condensation, a mesoporous silica hybrid integrated with (3-mercaptopropyl)trimethoxysilane (TMPSH) was prepared and then reacted with allylamine via a post-surface functionalization approach. Approximately 15 mol% of TMSPSH was...
An overview of all the studies on high-pressure intrusion—extrusion of LiCl aqueous solutions in hydrophobic pure silica zeolites (zeosils) for absorption and storage of mechanical energy is presented. Operational principles of heterogeneous ly...
A new accelerated concrete prism expansion test at 38 °C (accelerated CPT) is proposed for assessing the alkali-reactivity of concrete aggregates. In this test, concrete prisms with a standardized mix composition and different alkali contents are...
Dielectric behavior of electrolyte aqueous solutions with various concentrations in a cylindrical nanopore of MCM 41 silica has been investigated. The effect of confinement is investigated by using isothermal-isosurface-isobaric statistical ensemble,...
Amino-functionalized silica@resorcinol–formaldehyde nanocomposites (NH2-SiO2@RF) were synthesized for the removal of Cr(VI) from aqueous solutions using the sol–gel technique with two simple preparation steps, including the one-pot synthe...
A series of imidazolium and pyridinium ionic liquids with different anions (Cl−, Br−, BF4−, PF6−) has been evaluated for their adsorption activity on silica gel. Quantification of the ionic liquids has been performed by the use of RP-HPLC with organi...
Two enamel coatings with a high and a low silica content were prepared on 35CrMo steels via vacuum firing. Their corrosion behavior in a 0.5 M HCl solution including corrosion kinetics, microstructures and electrochemistry performance were studied in...
The physical properties of porous silica nanofibers are an important factor that impacts their performance in various applications. In this study, porous silica nanofibers were produced via solution blow spinning (SBS) from a silica precursor/polymer...
Mag@silica-Ag composite has a high sorption ability for I− in aqueous solution due to its high surface area and strong affinity for the studied anion. The material adsorbed I− rapidly during the initial contact time (in 45 min, η = 80%) and reached a...
The adsorption capacity of two sorbents, silica SBA-15 and titanosilicate ETS-10, toward Ce(III) was tested. The obtained sorbents were characterized using X-ray diffraction, nitrogen adsorption-desorption, Scanning electron microscopy, and Fourier-t...
To investigate an environmentally benign stabilizer for coarse-grained soil in southeast Tibet, poly (vinyl alcohol) (PVA) and silica fume were used to improve the geotechnical properties of coarse-grained soil. Unconfined compressive strength (UCS)...
Rice cultivation stands as a cornerstone of Sri Lanka’s economy, serving as a vital source of employment for rural communities. However, the constraints of limited land availability have prompted an escalating dependence on agrochemicals, notab...
Rubber used in tire is usually strengthened by nanofiller, and the most popular nanofiller for tire tread rubber is nano silica, which can not only strengthen rubber but also lower the tire rolling resistance to reduce fuel consumption. However, sili...
The purpose of this work was to develop, characterize and test new low-cost materials suitable for removing methylene blue dye from water and wastewater by adsorption. The solid materials consisted of silica gel powder (SG), silica gel mixed with egg...
A new nano-silica/chitosan (SiO2/CS) sorbent was created using a wet process to eliminate uranium(VI) from its solution. Measurements using BET, XRD, EDX, SEM, and FTIR were utilized to analyze the production of SiO2/CS. The adsorption progressions w...
The efficiency of Cu(II) removal from aqueous solution by two adsorbents, silica SBA-15 and titanosilicate ETS-10, was investigated. Effects of various experimental parameters such as: contact time, pH, initial copper concentration, adsorbent dosage,...
The use of mesoporous silica modified with L-arginine (Ar-MSNPs) for the removal of ionic dyes from aqueous solutions has been investigated. Several analytical techniques have been used to determine the characteristics of nanoadsorbents. The removal...
A high-quality dielectric layer is essential for organic thin-film transistors (OTFTs) operated at a low-power consumption level. In this study, a facile improved technique for the synthesis of solution-processed silica is proposed. By optimizing the...
In recent years, during industrial development, the expanding discharge of harmful metallic ions from different industrial wastes (such as arsenic, barium, cadmium, chromium, copper, lead, mercury, nickel, selenium, silver, or zinc) into different wa...
The purpose of this study is to identify the steps involved in fabricating silica/chitosan composite membranes and their suitability for fuel cell applications. It also intends to identify the physical characteristics of chitosan composite membranes,...
Crown ethers are famous for the highly selectively grab Sr(II) from concentrated nitric acid solution due to the size match, but they suffer from the high leakage into the liquid phase caused by the presence of a large number of hydrophilic groups. T...
Every year, a large quantity of vanadium-containing wastewater is discharged from industrial factories, resulting in severe environmental problems. In particular, V(V) is recognized as a potentially hazardous contaminant due to its high mobility and...
Commercial sodium hydroxide (NaOH) and sodium silicate (SS) have remained two of the leading alkaline activators widely used in producing geopolymer concrete, despite some identified negatives regarding their availability and additional CO2 emissions...
In this work, a poly(1-trimethylsilyl-1-propyne) (PTMSP) mixed-matrix membrane was fabricated for the selective removal of 1-butanol from aqueous solutions through pervaporation. Silica nanoparticles (SNPs), which were surface-modified with surfactan...
The use of supplementary cementitious materials such as fly ash, slag, and silica fume improve reinforced concrete corrosion performance, while decreasing cost and reducing environmental impact compared to ordinary Portland cement. In this study, the...
This study presented a novel corrosion protective coating based on polyacrylic/siloxane-silica (PEHA-SS) deposited on lightweight cast aluminium alloy AlSi7Mg0.3. The synthesis of PEHA-SS comprises organic monomer 2-ethylhexyl acrylate and organicall...
Dendritic Mesoporous Silica Nanoparticles (DMSNs) are considered superior in the adsorption of unfavorable chemical compounds and biological pollutants. Herein, we have synthesized folic acid-terminated dendritic mesoporous silica nanoparticles (FA-D...
In this work, a highly efficient and rapid method for simultaneously removing cationic dyes from aqueous solutions was developed by using monodispersed mesoporous silica nanoparticles (MSNs) as the adsorbents. The MSNs were prepared by a facile one-p...
The use of surface-enhanced Raman spectroscopy (SERS) in liquid solutions has always been challenging due to signal fluctuations, inconsistent data, and difficulties in obtaining reliable results, especially at very low analyte concentrations. In our...
The issues associated with the fabrication of nano-silica (NS) mineral powder, such as high cost and agglomeration, can be effectively mitigated by using a precursor solution of NS as the external mixture of cement-based materials. Based on the liqui...
Superhydrophobic coatings are widely applied in various applications due to their water-repelling characteristics. However, producing a durable superhydrophobic coating with less harmful low surface materials and solvents remains a challenge. Therefo...
This work presents a novel hydrothermally aided sol-gel method for preparation of mesoporous silica nanoparticles (MSNs) with a narrow particle size distribution and varied pore sizes. The method was carried out in alkaline media in presence of polye...
Concrete must be a hydrophilic compound that is easily fabricated by nature. At the nanoscale, mechanical and chemical reactions alter the quality of cement-based substances. Continuous sprinkling of nano-silica solution synthesised with minimal surf...
Mixtures of silica nanoparticles (SiO2 NPs) and natural organic matter (NOM) are ubiquitous in natural aquatic environments and pose risks to organisms. Ultrafiltration (UF) membranes can effectively remove SiO2 NP–NOM mixtures. However, the co...
Magnetic iron oxide-silica shell nanocomposites with different iron oxide/silica ratio were synthesized and structurally characterized by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), small-angle neutron scattering, magnet...
In this work, a new approach to solving problems of optimal control of manufacture procedures for the production of silica optical fiber are proposed. The procedure of silica tubes alloying by the Modified Chemical Vapor Deposition (MCVD) method and...
An innovative concept is proposed to recover ammonia from industrial wastewater using a molecular sieve silica membrane in pervaporation (PV), benchmarked against vacuum membrane distillation (VMD). Cobalt and iron doped molecular sieve silica-based...
A 3-Amino-Propyl Trimethoxy Silane (APTS) functionalized silica was prepared and investigated. The functionalized silica showed a powerful removal behavior towards Chromium (III) [Cr (III)] and Cadmium (II) [Cd (II)] ions in aqueous solution. Differe...
The removal of Cr(VI) in wastewater plays an important role in human health and environment. In this work, polypyrrole/hollow mesoporous silica particle (PPy/HMSNs) adsorbents have been newly synthesized by in-situ polymerization, which prevent the a...
The aim of the research was to prepare silica adsorbents using an environmentally friendly pathway, a template synthesis with saponin biosurfactant as a structure-directing agent. The adsorbents prepared in this way exhibit improved adsorption proper...
A molecularly imprinted silica gel sorbent for selective removal of 2-Hydroxybenzoic acid (2-HA) was prepared by a surface imprinting technique with a sol-gel process. The 2-HA molecularly imprinted silica gel (2-HA-MISG) sorbent was evaluated by v...
Nano-silica particles decorated with amine groups (S-DA) were prepared via a simple, one-pot method, and under very mild conditions in an attempt to improve the affinity of the silica nanoparticles toward capturing anionic organic dye, namely, methyl...
Nowadays, there is great interest in the use of plant waste to obtain materials for environmental protection. In this study, silica powders were prepared with a simple and low-cost procedure from biomass materials such as horsetail and common reed, a...
Heavy metal ions have a toxic and negative influences on the environment and human health even at low concentrations and need to be removed from wastewater. Chitosan and graphene oxide are suitable nano plate adsorbents with high adsorption potential...
of 30