Hierarchical aluminum-silicon materials have been successfully prepared by mixing pre-crystallization of silica-alumina sol and citric acid under hydrothermal conditions. The influence of pre-crystallization time on the micro-mesoporous structure is...
Tetraethoxy orthosilicate (TEOS) was used not only as a precursor of silica, but also as an agent which reinforces the skeleton of silica-gel to prepare an aerogel and resultant silica and silica-alumina with large pore size and pore volume. In this...
In methane combustion, water tolerance of Pd-based catalysts is quite critical for stable performance, because water is produced in situ and a water-containing feed is used under real conditions. Herein, water-tolerant mesoporous silica-alumina (H-MS...
The steam reforming of dimethyl ether (SRD) has been proved to be one of the most promising routes for on-site H2 production. However, the two-step consecutive nature of the SRD reaction makes the design of an efficient bifunctional catalyst a challe...
The development of green and sustainable materials for use as heterogeneous catalysts is a growing area of research in chemistry. In this paper, mesoporous SiO2-Al2O3 mixed oxide catalysts with different Si/Al ratios were prepared via hydrolytic (HSG...
The advancement of optical materials has garnered significant interest from the global scientific community in the pursuit of efficient photocatalysts for the purification of water using light. This challenge, which cannot be addressed using traditio...
Blast-furnace slag (BFS) has been used as a feedstock for CO2 sequestration by indirect mineral carbonation to produce calcium carbonate precipitates and solid residues. The most-abundant elements in these residues, Si and Al, are usually considered...
We investigated the interactions between nickel oxide and silica–alumina supports, which were applied to the catalytic oligomerization of ethylene by powder X-ray diffraction, UV diffuse reflectance spectroscopy, H2 temperature-programmed reduc...
Silica/alumina composite particles were synthesized via the sol–gel method to promote fine dispersion and homogenous mixing. Aluminum chloride hydroxide served as the alumina precursor, while amorphous silica, obtained from rice husk, was direc...
Thermally conductive composites were prepared based on epoxidized natural rubber (ENR) filled with alumina, silica, and hybrid alumina and silica. The thermal conductivity and mechanical properties were assessed. It was observed that the interactions...
Silica-based membranes prepared by chemical vapor deposition of tetraethylorthosilicate (TEOS) on γ-alumina overlayers are known to be effective for hydrogen separation and are attractive for membrane reactor applications for hydrogen-producing...
Fly ash or coal fly ash causes major global pollution in the form of solid waste and is classified as a “hazardous waste”, which is a by-product of thermal power plants produced during electricity production. Si, Al, Fe Ca, and Mg alone f...
Self- and cross-metathesis of fatty acid methyl esters (FAMEs) was investigated using a silica alumina supported Re2O7 catalyst. Although a 3 wt% Re2O7/SiO2-Al2O3/SnBu4 is already active for the metathesis of unsaturated FAMEs, the results have shown...
Phosphorous slag is an industrial by-product generated in the process of producing yellow phosphorus by electric furnace, which occupies a substantial number of land resources and causes serious environmental pollution. The comprehensive utilization...
In this study, we used two methods to prepare alumina-doped silica aerogels with the aim of increasing the thermal stability of silica aerogels. The first method was physical doping of α-Al2O3 nano powders, and the second method was to create a chemi...
Practical photocatalysis for degradation of organic pollutants must take into account the influence of other chemicals. Significant Al deposition on titania can occur at naturally occurring concentrations of dissolved Al. This paper reviews the autho...
Global warming, driven by greenhouse gases like CH4 and CO2, necessitates efficient catalytic conversion to syngas. Herein, Ni containing different molecular sieve nanomaterials are investigated for dry reforming of methane (DRM). The reduced catalys...
This research is designed to check the potential of modifying concrete with nanomaterials to enhance the cyclic behavior of beam−column joints. It also studies the effect of heat on the cyclic behavior of beam−column joints modified with...
Coal tar naphtha is produced from coal carbonization, moving bed coal gasification, and thermal liquefaction of coal. The naphtha can contain up to 60% aromatics and 15% olefins, as well as nitrogen-, oxygen-, and sulfur-containing compounds. Usually...
This study investigates the contribution of nano-alumina (nA: 1–3 wt.% binder) to the performance of silica fume (SF-10%) and ordinary Portland cement (OPC) binary blended mortar. Microstructural analysis and qualitative characterizations exami...
Adsorption is a common method for solving the contamination of methylene blue (MB) in dyeing wastewater. Aerogel adsorbents with high porosity and specific surface areas have attracted increasing attention. However, the high costs of raw materials fo...
Silica modified alumina was used in this study for coating of a cordierite monolith substrate with two different channel densities. The performance of the prepared monolith catalysts was evaluated in catalytic total oxidation of dichloromethane befor...
The nickel (II) loading silica-alumina under various treatments in terms of aging temperature, Si/Al ratio and activation temperature were investigated by XRD, N2 adsorption-desorption, TEM, UV-Vis, NH3-TPD and XRF and then applied to catalyze the et...
This study investigates the simultaneous effect of nano-silica and nano-alumina with and without polypropylene fiber on the chemical-resistant of alkali-activator mortar (AAM) exposed to (5% Sulfuric Acid, 5% Magnesium Sulphate, and 3.5% Sodium chlor...
Commercial alumina and silica–alumina catalysts were investigated for propylene (PEN) production via an isopropanol (IPA) dehydration reaction between 200 and 300 °C at an atmospheric pressure and IPA partial pressure of 5136 Pa. The reacti...
The effect of support material pretreatment temperature, prior to adding the active phase and promoters, on Fischer–Tropsch activity and selectivity was explored. Four iron catalysts were prepared on silica-stabilized alumina (AlSi) supports pretreat...
Microalgae and cyanobacteria are unicellular microorganism that contain high-added-value compounds. To make their extraction economically feasible, the biorefinery concept is the only solution. In this study, the residues resulting from lipid or prot...
The current study is aimed to evaluate the effect of nanomaterials (nano alumina (NA) and nano silica (NS) on the mechanical and durability performance of fiber-reinforced alkali-activated mortars (FRAAM). Polypropylene fiber (PPF) was added to the b...
Photo-Fenton advanced oxidation processes are promising and sustainable approaches for water treatment, particularly under visible-light irradiation. In this study, Cu-Fe bimetallic catalysts supported on silica and γ-alumina were developed for...
To address the challenges of low permeability, high gas adsorption, and a fragile structure in coalbed methane reservoirs, this study developed a high-strength composite proppant with an activated carbon skeleton via nitric acid pretreatment, silica&...
There are some limitations in the application of tuff powder as a supplementary cementitious material (SCM). Exploring its feasibility in new fields will consume a large amount of silica-alumina mine solid wastes. This study has investigated the mech...
3 December 2022
To apply coal fly ash to the remediation of heavy-metal-contaminated soil, an alumina–silica nano-amendment (ASNA) was synthesized from coal fly ash and was used for the immobilization of lead and zinc in contaminated soil. The investigation on...
High-silica–alumina coal gangue is rich in kaolinite, quartz, and other mineral components. The potential for resource utilization is huge, but the silica–aluminate structure is highly stable, and it is difficult to achieve efficient diss...
Coal gangue, a major industrial solid waste from coal mining and processing, requires efficient alumina and silica separation for high-value utilization. This study focused on mineral reaction mechanisms and characteristics of coal gangue during calc...
Alumina or silica gel are used as catalysts for a solvent-free oxidation of benzoins to the corresponding benzils. These catalysts are easily recovered after completion of the reactions, which are carried out either by heating in a sand bath or using...
Coal ashes (minerals) could be chemically removed to produce ultraclean coals for advanced utilizations such as oil substitutes and electrode materials. To eliminate secondary pollution and reduce deashing cost, chemicals should be recycled and valua...
The effects of Al2O3 coating on the performance of silica nanospring (NS) supported Co catalysts for Fischer–Tropsch synthesis (FTS) were evaluated in a quartz fixed-bed microreactor. The Co/NS-Al2O3 catalysts were synthesized by coating the Co...
A novel strategy has been developed for extracting value-added resources from iron-lean, high-alumina- and -silica-containing red muds (RMs). With little or no recycling, such RMs are generally destined for waste dumps. Detailed results are presented...
The online measurement of the aluminum–silicon ratio of red mud in the dissolution stage of the Bayer alumina production process is difficult to achieve. The offline assay method has a high cost and strong time delay. Soft sensors are an effect...
Surfactant-templated 5 mol% Al2O3-doped silica membranes nanofiltration membranes were synthesized via the sol-gel method, and afterward, were optimized, and tested with respect to the permeability and rejection rate. The disordered silica network wa...
The effect of different supports such as silica (SBA-15), activated carbon (AC), and mesoporous alumina (Al2O3) on catalytic activities of hydrotreating nickel molybdenum (NiMo) catalysts was demonstrated for upgrading vacuum residue. Nitrogen adsorp...
The preparation of continuous layers of highly hydrophobic pure silica ITQ-29 zeolite, potentially applicable as hydrophobic membranes for separation of molecules based on their polarity, has been investigated. Continuous layers of intergrown ITQ-29...
Rising greenhouse gas concentrations are causing climatic change that threatens ecosystem sustainability. This study investigated the impact of silica incorporation into alumina-supported nickel catalysts for the partial oxidation of methane (POM), a...
This study describes a novel approach using fibrous Al2O3-Nylon 6 composites to induce inhibition behavior in silica scaling systems. The composite fibers were fabricated with a wet-spinning process using the coagulation of a methanolic Nylon-CaCl2 s...
Silica is one of the most widely used ceramics due to its excellent chemical stability and dielectric property. However, its destructive brittle nature inhabits it from wider application as a functional ceramic. An improvement in toughness is a chall...
This study presents a systematic evaluation of frost resistance in concrete modified with nano-alumina (NA, 1 wt%), nano-silica (NS, 2 wt%), and polypropylene fiber (PP, 0.2 wt%) through accelerated freeze–thaw testing. The investigation employ...
Due to the continuously rising demand for C3–C5 olefins it is important to improve the performance of catalysts for dehydrogenation of light alkanes. In this work the effect of modification by SiO2 on the properties of the alumina support and the chr...
Brown corundum fly ash (BCFA), which is the collected ash in brown corundum production, has received lots of environmental concerns due to its ultra-fine particle size and complex composition. Aiming to recycle the major elements including K, Al and...
This research explores the effect of a composite support of SiO2 and Al2O3 with Fe and Co incorporated as catalysts for Fischer–Tropsch synthesis (FTS) using a 3D-printed stainless steel (SS) microchannel microreactor. Two mesoporous catalysts,...
The use of heterogeneous catalysts to increase the development of green chemistry is a rapidly growing area of research to save industry money. In this paper, mesoporous SiO2-Al2O3 mixed oxide supports with various Si/Al ratios were prepared using tw...
of 8