Research into plastic recycling is rapidly increasing as ocean and land pollution and ecosystem degradation from plastic waste is becoming a serious concern. In this study, we conducted a systematic review on emerging research topics, which were sele...
This study underscores the importance of sustainable practices by exploring the utilization of recycled plastic within the global construction industry. Plastic recycling has emerged as a crucial strategy that aligns with environmental, social, and e...
This study summarizes existing studies on plastic recycling to determine whether ocean plastics with high pollution degrees could be used for cement-based materials. In particular, the methods to recycle plastic waste, the effects of recycled plastic...
Innovation in plastic waste recycling technologies is essential for tackling the environmental challenges of plastic pollution. Traditional plastic waste management strategies, such as landfill disposal and mechanical recycling, are increasingly reco...
Confronted with serious environmental problems caused by the growing mountains of plastic packaging waste, the prevention and control of plastic waste has become a major concern for most countries. In addition to the recycling of plastic wastes, desi...
Plastic is a valuable material for packaging of food and pharmaceuticals, protective wrappings in construction and agriculture, and fluid storage. Flexible plastic or plastic film waste from packaging, agriculture, and construction applications grows...
Although the benefits of asphalt recycling have been scientifically proven and several best practices are being implemented, further research is required in specific and specialized areas. One of these circumstances is the recycling of Reclaimed Asph...
The accumulation of plastic waste poses a significant environmental challenge, necessitating sustainable solutions. This study investigates the potential of recycling waste plastics for use in the construction industry, emphasizing their integration...
The increasing consumption of plastics and plastic products results in correspondingly substantial volumes of waste, which poses considerable environmental burdens. With the ongoing environmental actions, the application of circular economy on this w...
Plastics are increasingly a preferred material choice in designing and developing complex, consumer products, such as automobiles, because they are mouldable, lightweight, and are often perceived to be highly recyclable materials. However, actually r...
15 August 2022
The environmental accumulation of plastic wastes has become one of the most discussed topics in the scientific community. The development of new strategies to tackle this issue is of crucial importance, and different approaches are being investigated...
Bio-based plastics are increasingly appearing in a range of consumption products, and after use they often end up in technical recycling chains. Bio-based plastics are different from fossil-based ones and could disturb the current recycling of plasti...
Plastic is a versatile material that has contributed to numerous product innovations and convenience in everyday life. However, plastic production is growing at an alarming rate, and so has the generation of plastic waste. Unsound waste management re...
Plastic containers are a major source of pollution and contribute to greenhouse gases. Many plastic containers are embossed with a small symbol of three arrows forming a triangle and a number in the middle of the triangle. As part of a US online stud...
The price of oil has a great influence on prices of recycled plastics and, therefore, plastic recycling efforts. Here, we analyze the effects of the ongoing COVID-19 pandemic on crude oil price and how this, in turn, is likely to affect the degree of...
With a value of 400.3 Mt, the global plastics production increased in 2022 with a plus of 2.5 wt% compared to the previous years. Unfortunately, plastic waste is often disposed of inappropriately, causing environmental problems and an avoidable waste...
In line with efforts to create a circular economy of plastics, recent EU legislation is strengthening plastic bottle recycling by ambitious separate collection targets and mandatory recycled content obligations. Furthermore, explicit design requireme...
The issue of waste plastic generation is a pressing global concern with several significant environmental, economic, and health implications. Various studies have explored the utilization of recycled plastics in construction, yet there is a notable g...
Microplastic particles have been found virtually everywhere, including within our food and drinking water. While the implications of microplastics on human health are not fully known, early effects have been seen on marine life and the environment. S...
Challenges associated with plastic waste management range from littering to high collection costs to low recycling rates. Effective collection of plastics is obviously an important step in the management of plastic waste and has an impact on recyclin...
Plastic films used for crop protection have reached notable consumption all over Europe, as well as in the rest of the world. This phenomenon however poses a serious environmental problem connected with the impact on the sustainability of agricultura...
The use of plastic film for mulching cultivation is an important agricultural production technology, which plays an important role in achieving agricultural yield increase and farmers’ income increase. China’s use of plastic mulch ranks f...
Wood–plastic recycled composite (WPRC) are composites obtained by heating and mixing the main raw material, wood flour, with thermoplastic resin, containing at least 40% by mass of recycled material in the raw material. In order to promote the...
Effective management of recyclable plastic waste is critical for environmental sustainability and economic viability. Blockchain technology has transformative potential in addressing the challenges of plastic waste management. Currently, the ineffici...
Finding beneficial uses for waste plastics has been an environmental challenge for municipalities. A limited number of studies have investigated the performance of asphalt mixtures containing plastic waste in cold regions that experience freeze-thaw...
In Japan, the majority of waste plastics are classified into three categories: approximately 22% are used for material recycling, 3% are used for chemical recycling, and 62% are used for thermal recycling. Thermal recycling is not considered true rec...
This study examined plastic waste management in Sri Lanka, concentrating on the contributing factors to plastic waste generation and collection. Data were gathered through a questionnaire survey from registered plastic recycling and management centre...
15 April 2021
Waste plastic today is a global threat. The rapid increase in global production and use has led to increasing quantities of plastics in industrial and municipal waste streams. While in industrialized countries plastic waste is taken up by a waste man...
Over the past 50 years, global plastic production has surged exponentially. Around 40% of this plastic is used for packaging, most of which is single-use, while 20% is used in construction. Despite the vast quantities produced, only about 6% of disca...
Conventional mechanical recycling technologies cannot recycle all types and amounts of generated plastic waste. Pyrolysis can convert these municipal mixed plastic streams into products with significant calorific value, which are likely to be used as...
Plastic product consumption and disposal are widespread. Given that these products are derived from crude oil, it is critical to reduce their consumption and effectively recycle plastic waste as recycled resources to achieve a low-carbon society. Jap...
To improve the recycling quality of plastics packaging and achieve high recycling rates new identification and sorting technologies are required. Tracer-based-sorting (TBS) is an innovative identification technology based on fluorescent tracers and a...
In 2018–2019, 85% of discarded plastics were landfilled in Australia. In Western Australia (WA), only 5.6% of plastics were recovered for reprocessing. With several Asian Countries imposing import restrictions, which were the prime destination...
Packaging constitutes the largest end-use market for plastics, accounting for approximately 40% of total consumption by sector. In 2021, the average plastic packaging waste generated per European Union (EU) resident was 35.9 kg, of which 14.2 kg, or...
The presence of different pollutants in recycled plastics is reviewed in this article. The desirable circular economy of plastics should be linked to the availability of clean recycled plastics with a non-significant and small to nil amount of substa...
Globally, we produced 489 million tonnes of plastic in 2023 and we recycled only 8.17%. This study navigates the landscape of recycling practices, highlighting the imperative to reevaluate and upgrade industry-standard protocols. The central focus of...
A growing plastic production increases the pressure on waste management systems, which have to cope with greater volumes of plastic waste. Increased plastics recycling can reduce environmental impacts by lowering the need for primary plastics product...
The amount of end-of-life electrical and electronic devices has been widely increased, globally. This emphasizes how recycling waste electric and electronic equipment (WEEE) is essential in order to reduce the amount of WEEE that is disposed of direc...
This study aims to improve the mechanical properties of post-consumer recycled (PCR) plastic composed primarily of polypropylene (PP) and polyethylene (PE), which generally exhibit poor miscibility, by applying coupling agents and graphene. Here, we...
The automotive industry has used plastics almost since the beginning. The lightness, flexibility, and many qualities of plastics make them ideal for the automotive industry, reducing cars’ overall weight and fuel consumption. Engineering plasti...
The civilization development requires improvement of technologies and satisfaction of people’s needs on the one side, but on the other one it is directly connected with the increasing production of waste. In this paper, the authors dealt with t...
The incidence of failure of embedded pipelines has increased in Korea due to the increasing applied load and the improper compaction of bedding and backfill materials. To overcome these problems, a prefabricated lightweight plastic foundation using r...
As designing with recycled materials is becoming indispensable in the context of a circular economy, we argue that understanding how recycled plastics are perceived by stakeholders involved in the front end of the design process, is essential to achi...
The extensive use of carbon fiber-reinforced plastics (CFRP) in aerospace, civil engineering, and other fields has resulted in a significant amount of waste, leading to serious environmental issues. Finding appropriate methods for recycling CFRP wast...
29 September 2021
A rapid increase in the number of end-of-life (EoL) passenger vehicles has led to a large amount of waste plastics in China. However, the scale and efficiency of recycling resources from EoL vehicles still restricts the sustainable and healthy develo...
Plastic packaging materials can play a significant role in turning the plastic industry towards a circular economy, owing to their large volumes and short product lifetimes. This study emphasizes the role and interaction of design for recycling (DfR)...
Most of the plastic-based solutions used in bio-manufacturing are today incinerated after use, even the not “bio-contaminated”. Bioprocessing bags used for media and buffer preparation and storage represent the largest amount today. The a...
The impact of plastic pollution on the world and its inhabitants is yet to be fully measured. Significant quantities of microplastics and nanoplastics have been found in human organs, and many diseases have been traced to their presence. Even human p...
Recycling, depositing, and proper discarding of plastics are significant means to reduce plastics in the environment. The purpose of this study was to monitor both the type and amount of plastic food packages recycled, reused, and discarded in Finnis...
In light of the circular economy gaining momentum, plastics recycling is regarded as a key solution to keep materials in the loop. Continuous efforts are needed to achieve the packaging waste recycling targets set by the European Union. Hence, this w...
of 48