Nitrogen-doped carbon materials, including nitrogen-doped carbon nanotubes (NCNTs) and nitrogen-doped graphene (NG), have attracted increasing attention for oxygen reduction reaction (ORR) in metal-air batteries and fuel cell applications, due to the...
Nitrogen-doped carbon dots are introduced as a novel substrate suitable for enzyme immobilization in electrochemical detection metods. Nitrogen-doped carbon dots are easily synthesised from polyacrylamide in just one step. With the help of the amino...
Nitrogen doped carbon nanotubes (N-CNTs) have become a topic of increased importance in the study of carbonaceous materials. This arises from the physical and chemical properties that are created when N is embedded in a CNT. These properties include...
A one-step method for plasma synthesis of nitrogen-doped carbon nanomesh is presented. The method involves a molten polymer, which is a source of carbon, and inductively coupled nitrogen plasma, which is a source of highly reactive nitrogen species....
2D nitrogen-doped mesoporous carbon (NMC) is synthesized by using a mesoporous silica film as hard template, which is then investigated as a non-precious metal catalyst for the oxygen reduction reaction (ORR). The effect of the synthesis conditions o...
The excessive consumption of fossil fuels has resulted in massive carbon emissions and serious ecological and environmental crises. Therefore, achieving the efficient utilization of waste carbon sources is considered as an important pathway to addres...
The development of supercapacitors with high volumetric capacitance and high-rate performance has been an important research topic. Activated carbon (AC), which is a widely used material for supercapacitor electrodes, has different surface structures...
The effect of nitrogen doped bamboo-like carbon nanotubes (N–CNTs) on the properties of supported platinum (0.2 and 1 wt %) catalysts in formic acid decomposition for hydrogen production was studied. It was shown that both impregnation and homo...
Nitrogen-doped carbon nanotubes (N-CNTs) show promise in several applications related to catalysis and electrochemistry. In particular, N-CNTs with a single nitrogen dopant in the unit cell have been extensively studied computationally, but the struc...
Nitrogen-doped carbon materials with enhanced CO2 adsorption were prepared by the salt and base co-activation method. First, resorcinol-formaldehyde resin was synthesized with a certain salt as an additive and used as a precursor. Next, the resulting...
Catalysis requires extrapolations from computational models to the catalytic activity observed under practical operating conditions, especially for single-atom catalysts, to be made. Thus, it is necessary to understand the fundamental interactions at...
In this work, nitrogen-doped activated carbon was produced from waste coffee powder using a two-step chemical activation process. Nitrogen doping was achieved by treating the coffee powder with melamine, prior to chemical activation. The produced nit...
Highly porous nitrogen-doped carbon nanomaterials have distinct advantages in energy storage and conversion technologies. In the present work, hydrothermal treatments in water or ammonia solution were used for modification of mesoporous nitrogen-dope...
In this study nitrogen-doped carbon quantum dots/graphitic carbon nitride nanosheet (CNQD) composites with different contents of nitrogen-doped carbon quantum dots (NCQDs; 2, 4, 6, and 8 wt%) were synthesized. The morphological, physicochemical, and...
Carbon is predominantly used in zinc-ion hybrid capacitors (ZIHCs) as an electrode material. Nitrogen doping and strategic design can enhance its electrochemical properties. Melamine formaldehyde resin, serving as a hard carbon precursor, synthesizes...
This study prepared silicon oxide anode materials with nitrogen-doped carbon matrices (SiOx/C–N) through silicon-containing polyester thermal carbonization. Melamine was introduced as a nitrogen source during the experiment. This nitrogen dopin...
Serving as conductive matrix and stress buffer, the carbon matrix plays a pivotal role in enabling red phosphorus to be a promising anode material for high capacity lithium ion batteries and sodium ion batteries. In this paper, nitrogen-doping is pro...
Chemical modification improves the performance of the carbon anode in sodium-ion batteries (SIBs). In this work, porous nitrogen-doped carbon (PNC) was obtained by removing template nanoparticles from the thermal decomposition products of calcium glu...
Nitrogen-doped porous carbon (NPC) materials were successfully synthesized via a Zn-containing metal-organic framework (Zn-MOF). The resulting NPC materials are characterized using various physicochemical techniques which indicated that the NPC mater...
The design and preparation of novel, high-efficiency, and low-cost heterogeneous catalysts are important topics in academic and industry research. In the past, inorganic materials, metal oxide, and carbon materials were used as supports for the devel...
Here, nitrogen-doped carbon nanotubes (CNT-N) were synthesized using exfoliated graphitic carbon nitride functionalized with nickel oxides (ex-g-C3N4-NixOy). CNT-N were produced at 900 °C in two steps: (1) ex-g-C3N4-NixOy reduction with hydrogen...
Carbon dioxide emissions, particularly from large point sources such as fossil-fuel power plants, represent a primary driver of global warming. Although various carbon-based adsorbents have been developed for carbon capture applications, most existin...
Nitrogen-doped carbon-supported metal nano-particles show great promise as high-performance catalysts for novel energies, organic synthesis, environmental protection, and other fields. The synergistic effect between nitrogen-doped carbon and metal na...
Besides outstanding catalytic performance, the stability of nitrogen-doped carbon materials during storage is equally crucial for practical applications. Therefore, we conducted the first investigation into the stability of highly nitrogen-doped acti...
Plastic waste leaves a serious environmental footprint on the planet and it is imperative to reduce this. Consequently, recycling has been regarded as an important approach in providing one solution to this problem. In this study, we enhanced the val...
In this work, Fe–decorated nitrogen–doped carbon nanospheres are prepared for electrochemical monitoring of acetaminophen. Via a direct pyrolysis of the melamine–formaldehyde resin spheres, the well–distributed Fe–NC sph...
The facile preparation of non-noble metal nanoparticle loaded carbon nanomaterials is promising for efficient oxygen reduction reaction (ORR) electrocatalysis. Herein, a facile preparation strategy is proposed to prepare nitrogen-doped carbon sponge...
A series of nitrogen-doped carbons (NCs) were prepared by the pyrolysis (300–900 °C) of crystalline polyazomethine (PAM) synthesized via a facile condensation reaction in methanol solvent. The controlled solvent evaporation resulted in PAM crystals i...
The electrocatalytic reduction of CO2 (ECO2RR) to syngas with tunable CO/H2 ratios offers a promising route for sustainable energy conversion and chemical production. Here, we report a series of N-doped carbon black (NCBx) catalysts with tailored nit...
We report the synthesis of nitrogen-doped hierarchical meso/microporous carbon using renewable biomass bamboo fungus as precursor via two-step pyrolysis processes. It is found that the developed porous carbon (NHPC-800) features honeycomb-like cellul...
Nitrogen-doped carbon materials demonstrate high performance as electrodes in fuel cells and higher oxygen reduction reactivity than traditional Pt-based electrodes. However, the formation process of nitrogen-doped carbon materials has long been a my...
Benefiting from the additional active sites for sodium-ion (Na+) adsorption and porous architecture for electrolyte accessibility, nitrogen-doped porous carbon has been considered the alternative anode material for Na+-storage applications. In this s...
Heteroatom doping, especially nitrogen doping, has been regarded as an efficient strategy to break through the capacity limitation of carbonaceous anode materials in potassium-ion batteries (PIBs). Constructing edge-nitrogen-rich carbon skeleton with...
Nitrogen-doped activated carbon (N-AC) obtained through the thermal treatment of a mixture of HNO3-pretreated activated carbon (AC) and urea under N2 atmosphere at 600 °C was used as the carrier of Pd catalyst for both liquid-phase hydrodechlorin...
The surface properties and the hierarchical pore structure of carbon materials are important for their actual application in supercapacitors. It is important to pursue an integrated approach that is both easy and cost-effective but also challenging....
Tramadol is a widely used pain medication detected in wastewater treatment plants, prompting concerns about its impact on the environment and the effectiveness of wastewater treatment. Nitrogen-doped carbon quantum dots (NCQDs) can be used to remove...
Biomass resources are excellent candidates for carbon electrode materials due to their abundance, renewability, and biodegradability. Herein, the solanaceous crop Tobacco Straw, a rich agricultural by-product, was utilized to prepare biomass-derived...
Sustainable biomass-derived carbons have attracted research interest because of their ability to effectively absorb and convert solar light to thermal energy, a phenomenon known as solar thermal heating. Although their carbon-based molecular and nano...
The fundamental chemistries and electronic structures of platinum catalysts over nitrogen-doped carbon supports were examined to determine the subtle yet important roles graphitic defect-based and pyridinic defect-based nitrogen defects have in stabi...
Carbon nanotubes (CNTs) are considered a promising candidate for the detection of toxic gases because of their high specific surface area and excellent electrical and mechanical properties. However, the detecting performance of CNT-based detectors ne...
Iron oxide nanoparticles supported on nitrogen-doped activated carbon powder were synthesized using an innovative plasma-in-liquid method, called the liquid phase plasma (LPP) method. Nitrogen-doped carbon (NC) was prepared by a primary LPP reaction...
Supercapacitors (SCs) have been regarded as alternative electrochemical energy storage devices; however, optimizing the electrode materials to further enhance their specific energy and retain their rate capability is highly essential. Herein, the inf...
Nitrite, as a widely present nitrogen oxide compound in nature, and is extensively distributed in production and daily life; precise and rapid detection of it is of great significance for ensuring human health. This study developed nitrogen-doped car...
Lithium-ion capacitors (LICs) are emerging as one of the most advanced hybrid energy storage devices, however, their development is limited by the imbalance of the dynamics and capacity between the anode and cathode electrodes. Herein, anthracite was...
Zeolitic imidazolate framework-8 (ZIF-8) has been extensively studied as a precursor for nitrogen-doped carbon (NC) materials due to its high surface area, tunable porosity, and adjustable nitrogen content. However, the intrinsic microporous structur...
In this study we present an application of wood biomass—alder wood char—as the carbon precursor for the synthesis of novel and sustainable nitrogen-doped activated-carbon-supported nickel nanoparticle catalyst (AWC-Ni-N) for hydrazine oxi...
Diamond-like carbon (DLC) has attracted much attention due to its unique properties such as high chemical inertness, optical transparency, and high biocompatibility. In this study, the total gas flow rate was kept constant, while the ratio of reactiv...
A series of ZnO-doped nitrogen-carbon materials (xZnO-N-C) with ZnO contents of 5–40% are prepared by a vacuum curing–carbonization strategy using polyamide-imide as the N-C source and zinc nitrate as the metal source for propane dehydrog...
Nitrogen-doped carbon quantum dots (N-CQDs) were synthesized in a one-step hydrothermal technique utilizing L-lactic acid as that of the source of carbon and ethylenediamine as that of the source of nitrogen, and were characterized using dynamic ligh...
In this work, a three dimensional (3D) graphene-nitrogen doped carbon nanotubes (G-NCNTs) network was successfully fabricated on the surface of a glassy carbon (GC) electrode using the pulse potential method (PPM) in a graphene oxide-nitrogen doped c...
of 20