We investigated the interactions between nickel oxide and silica–alumina supports, which were applied to the catalytic oligomerization of ethylene by powder X-ray diffraction, UV diffuse reflectance spectroscopy, H2 temperature-programmed reduc...
This study explores the selective hydrogenation of cinnamaldehyde using a series of metal catalysts supported on reduced graphene oxide (rGO) and conventional activated carbon (AC). Catalysts based on Pt, Pd, Rh, Ru, and Co were synthesized with cont...
Supports used in heterogeneous metallic catalysts serve as a structural skeleton across which metallic nanoparticles are dispersed, but specific properties of the supports may also determine the behavior of these nanoparticles in catalytic processes....
The present work is aimed at shedding light on the evolution of surface chemistry of a commercial activated carbon (AC) support during the preparation of supported metal oxide (MO) catalysts by the conventional wet impregnation method. Particular att...
The discoveries and development of the oxidative strong metal–support interaction (OMSI) phenomena in recent years not only promote new and deeper understanding of strong metal–support interaction (SMSI) but also open an alternative way to develop su...
Methane is the most stable hydrocarbon with a regular tetrahedral structure, which can be activated and oxidized above 1000 °C in conventional combustion. Catalytic oxidation is an effective way to eliminate lean methane under mild conditions, an...
Acetone-stabilized Au- and Sn-solvated metal atoms (SMAs) were used as to obtain Au- and AuSn-supported catalysts by simple impregnation on a reducible (TiO2) and a non-reducible (Al2O3) metal-oxide. Their catalytic behaviour was investigated for cyc...
Metal-supported oxide cells (MSCs) are considered as the third-generation solid oxide cells (SOCs) succeeding electrolyte-supported (first generation) and anode-supported (second generation) cells, which have gained much attention and progress in the...
Pt-based catalysts exhibit unique catalytic properties in many chemical reactions. In particular, metal–support interactions (MSI) greatly improve catalytic activity. However, the current MSI mechanism between platinum (Pt) and the support is n...
Regulating the metal–support interaction is essential for obtaining highly efficient catalysts for the catalytic oxidation of volatile organic compounds (VOCs). In this work, CuO-TiO2(coll) and CuO/TiO2(imp) with different metal–support i...
The design of metal-supported solid oxide fuel cells (MS-SOFCs) has again aroused interest in recent years due to their low cost of materials, strength, and resistance to thermal cycling, as well as the advantages of manufacturability. MS-SOFCs are p...
The strong metal–support interaction (SMSI) between the three components in Au/CeO2–Mg(OH)2 can be controlled by the relative composition of CeO2 and Mg(OH)2 and by the calcination temperature for the direct oxidative esterification of me...
The chromium-free oxide precursor strategy effectively avoids chromium volatilization and electrode contamination in metal-supported solid oxide fuel cells (MS-SOFCs), while enabling high-temperature co-sintering in air to simplify the fabrication pr...
In this study we report on the development and operational data of a metal-supported solid oxide fuel cell with a thin film electrolyte under varying conditions. The metal-ceramic structure was developed for a mobile auxiliary power unit and offers p...
Enzyme immobilization on inorganic materials is gaining more attention with the potential characteristics of high-surface-area-to-volume ratios, increasing the efficiency of enzyme loading on the support. Metal oxide hybrid support was prepared by a...
Tea is the second most consumed beverage, and its aroma, determined by volatile compounds (VOCs) present in leaves or developed during the processing stages, has a great influence on the final quality. The goal of this study is to determine the volat...
How important is the support during the rational design of a catalyst? Herein, doped ceria (Zr; Pr and Tb) was used as an active support to prepare Pt catalysts (0.5 wt%) for glycerol selective oxidation. A thorough characterization of achieved catal...
Gold-iron oxide (Au/FeOx) is one of the highly active catalysts for CO oxidation, and is also a typical system for the study of the chemistry of gold catalysis. In this work, two different types of iron oxide supports, i.e., hydroxylated (Fe_OH) and...
The increasing concentration of anthropogenic CO2 in the air is one of the main causes of global warming. The Paris Agreement at COP 21 aims to reach the global peak of greenhouse gas emissions in the second half of this century, with CO2 conversion...
Catalysis is an indispensable part of our society, massively involved in numerous energy and environmental applications. Although, noble metals (NMs)-based catalysts are routinely employed in catalysis, their limited resources and high cost hinder th...
The selective oxidation of styrene under heterogeneous catalyzed conditions delivers environmentally friendly paths for the production of benzaldehyde, an important intermediate for the synthesis of several products. The present review explores heter...
Nowadays, the oxidation activity at the low-temperature regime for Co3O4 catalysts needs to be improved to meet the stringent regulation of multi-pollutant diesel exhaust. Herein, nanoflower-like Co3O4 diesel oxide catalysts (DOCs) were fabricated wi...
The adsorption and reaction of nitric oxide (NO) molecules on the surface of the model-supported metal/oxide system, consisting of Ni nanoparticles deposited on α-Al2O3 (0001) in ultra-high vacuum, have been studied using in situ surface-sensit...
The present study reports the use of the dynamic light scattering (DLS) method to analyze metal nanoparticle sizes in supported catalysts (as a model system for different metal-oxide nanocomposites, ceramics, etc.). The selective dissolution of matri...
Oxidation of 5-hydroxymethylfurfural (HMF), a major feedstock derived from waste/fresh biomass, into 2,5-furandicarboxylic acid (FDCA) is an important transformation for the production of biodegradable plastics. Herein, we investigated the effect of...
A series of Ag-modified manganese-mullite (SmMn2O5) catalysts with different Ag contents (1, 3, and 6 wt.%) were prepared via a citric acid sol–gel method for catalytic soot oxidation. The catalysts were characterized by powder X-ray diffractio...
In recent years, the application of microwave (MW) irradiation has played an increasingly important role in the synthesis and development of high performance nanoscale catalytic systems. However, the interaction of microwave irradiation with solid ca...
In this study, the resistance to corrosion of niobium-doped tin dioxide (Nb-doped SnO2, NTO) and antimony-doped tin oxide (Sb-doped SnO2, ATO) supports has been probed for proton-exchange membrane fuel cell (PEMFC) application. To achieve this goal,...
Palladium nanoparticles were supported on unusual mixtures of anatase, TiO2 (II) and rutile titania phases by wet impregnation, obtaining catalysts with metal contents of ca. 0.25 wt % labeled Pd/Ti5, Pd/Ti45, and Pd/Ti120. Crystalline structures wer...
The redox pretreatment of samples is one of the crucial ways of altering the catalytic properties of the supported noble metal materials in many heterogeneous reactions. Here, H2-reducing pretreatment is reported to enhance the thermal stability of A...
Cu-based catalysts supported on sepiolite have been tested in vapor-phase hydrogenation of furfural. The incorporation of basic or amphoteric metal oxides (magnesium oxide, zinc oxide, or cerium oxide) improves the catalytic behavior, reaching a maxi...
The composites of transition metal-doped titania and carbon have emerged as promising supports for Pt electrocatalysts in PEM fuel cells. In these multifunctional supports, the oxide component stabilizes the Pt particles, while the dopant provides a...
Formation of gold nanosized particles supported by aluminum oxide film grown on Mo(110) substrate and oxidation of carbon monoxide molecules on their surface have been in-situ studied in ultra-high vacuum by means of Auger electron spectroscopy (AES)...
Catalytic conversion of CO2 to CO via the reverse water gas shift (RWGS) reaction has been identified as a promising approach for CO2 utilization and mitigation of CO2 emissions. Bare Pt shows low activity for the RWGS reaction due to its low oxophil...
Two major green house gases (CO2 and CH4) can be converted into useful synthetic gas (H2 and CO) during dry reforming of methane (DRM) reaction, and a lot of scientific efforts has been made to develop efficient catalysts for dry reforming of methane...
The oxidative C-C cleavage of a C18 substrate is an important transformation in synthetic organic chemistry, facilitating the synthesis of valuable C8-C9 acids widely used in many industries. Through a comparative analysis of the catalytic and physic...
New series of Cu(II) and Mn(II) complexes with Schiff base ligands derived from 2-furylmethylketone (Met), 2-furaldehyde (Fur), and 2-hydroxyacetopheneone (Hyd) have been synthesized in situ on SBA-15-NH2, MCM-48-NH2, and MCM-41-NH2 functionalized su...
Nowadays catalytic technologies are widely used to purify indoor and outdoor air from harmful compounds. Recently, Ag–CeO2 composites have found various applications in catalysis due to distinctive physical-chemical properties and relatively low cost...
The metal–support interaction (MSI) has a remarkable effect on the catalytic properties, but how to precisely modulate its degree remains a huge challenge. Herein, polyvinylpyrrolidone (PVP) with three different molecular weights (MWs) (24, 58,...
A recent development for selective ammonia oxidation into nitrogen and water vapor (NH3-SCO) over noble metal-based catalysts is covered in the mini-review. As ammonia (NH3) can harm human health and the environment, it led to stringent regulations b...
Nickel catalysts supported on homemade CeO2 oxide were prepared by two procedures intending to achieve different degree of metal-support interaction. One method consisted of a co-precipitation that was assisted by microwave; the other method was base...
A detailed characterization of metal clusters bound at the surface of crystalline metal oxide supports is crucial for identifying their structure–property relationships relevant to practical applications. Theoretical investigations based on fir...
A series of Pd-TiO2/Pd-Ce/TiO2 catalysts were prepared by an equal volume impregnation method. The effects of different Pd loadings on the catalytic activity of chlorobenzene (CB) were investigated, and the results showed that the activity of the 0.2...
Catalytic performance and moisture and sulfur dioxide resistance are important for a catalyst used for the oxidation of volatile organic compounds (VOCs). Supported noble metals are active for VOC oxidation, but they are easily deactivated by water a...
Supported copper oxide nanoparticles have attracted considerable attention as active and non-precious catalysts for many catalytic oxidation reactions. Herein, mesoporous xCuO-TiO2 nanotube catalysts were fabricated, and their activity and kinetics t...
In this article, the role of surface sites of modified zeolites with semiconductor nanoparticles as alternative photocatalyts for protecting post-harvest foodstuff from the detrimental effects of ethylene is addressed. Two single and one double catal...
Au nanoparticles bound to crystalline CeO2 nanograins that were dispersed on the nanoplate-like Mg(OH)2, denoted as Au/CeO2-Mg(OH)2, were developed as the highly active and selective multifunctional heterogeneous catalyst for direct oxidative esterif...
Background: The conversion of carbon dioxide (CO2) into valuable products like carbon monoxide (CO) is an important process facing limitations due to poor energy efficiency. Dielectric barrier discharge (DBD) plasma reactors offer a potential solutio...
Supported Pd/CeO2 catalytic systems have been widely investigated in the low-temperature oxidation of CO (LTO CO) due to the unique oxygen storage capacity and redox properties of the ceria support, which highly influence the structural, chemical and...
This article evokes the futuristic visions of two giants, one a writer, Jules Verne, who foresaw water as the coal of the future, and the other a scientist, Giacomo Ciamician, who foresaw the utilization of solar energy as an energy source with which...
of 32