Skip to Content

149 Results Found

  • Article
  • Open Access
7 Citations
4,588 Views
11 Pages

18 April 2019

In order to improve the wear resistance of TC11 titanium alloy, a mixture of ZrN (10 wt.%, 20 wt.%, 30 wt.%, and 40 wt.%) and TC11 alloy powders are laser cladded on a forged TC11 substrate. The microstructure and wear property of coatings are system...

  • Article
  • Open Access
7 Citations
3,717 Views
14 Pages

13 December 2019

The hard and corrosion resistant coatings of Mo2NiB2 cermet were prepared by the laser cladding technique. The influences of the Mo:B ratio and the laser scanning speed on the microstructure and property of the Mo2NiB2 cermet coatings were investigat...

  • Article
  • Open Access
82 Citations
6,214 Views
11 Pages

28 November 2018

The 12CrNi2 alloy steel powder studied in the present paper is mainly used to manufacture camshafts for nuclear power emergency diesel engines. Laser cladding deposition is of great significance for the manufacture of nuclear power emergency diesel c...

(This article belongs to the Collection Additive Manufacturing: Alloy Design and Process Innovations)
  • Article
  • Open Access
9 Citations
2,989 Views
13 Pages

A Novel Superhard, Wear-Resistant, and Highly Conductive Cu-MoSi2 Coating Fabricated by High-Speed Laser Cladding Technique

  • Yanmiao Li,
  • Xiaojun Zhao,
  • Pengyuan Zhai,
  • Pengyu Fan and ,
  • Jiahui Xu,
  • Yuefan Xu,
  • Zengkai Yu,
  • Muyang Li,
  • Yongtong Zhang and
  • Lairong Xiao
  • + 8 authors+ 3 authors

20 December 2023

The pursuit of an advanced functional coating that simultaneously combines high hardness, wear resistance, and superior electrical conductivity has remained an elusive goal in the field of copper alloy surface enhancement. Traditional solid solution...

  • Review
  • Open Access
67 Citations
9,854 Views
23 Pages

30 September 2022

Laser cladding (LC) is a laser-based surface modification technique widely adopted to develop a thin coating or remanufacture worn-out mechanical components that work in extreme conditions. LC helps to generate superior surface properties and surface...

  • Article
  • Open Access
1,615 Views
9 Pages

Semiconductor Laser with Electrically Modulated Frequency

  • Boris Laikhtman,
  • Gregory Belenky and
  • Sergey Suchalkin

27 August 2025

We propose a novel method for controlling the frequency of semiconductor lasers. This technique facilitates the production of devices with fast frequency tuning and intrinsic linearization of laser frequency sweeps. The electrical contact layer posit...

(This article belongs to the Special Issue Photonics: 10th Anniversary)
  • Article
  • Open Access
16 Citations
2,983 Views
14 Pages

Tribological Properties of Laser Cladded Alloys for Repair of Rail Components

  • Panahsadat Fasihi,
  • Olivia Kendall,
  • Ralph Abrahams,
  • Peter Mutton and ,
  • Cong Qiu,
  • Thomas Schläfer and
  • Wenyi Yan
  • + 2 authors+ 0 author

25 October 2022

Tram or light rail systems are heavily relied upon for passenger transit; however, low-carbon steel grades commonly used in special trackwork, such as in switches, are prone to wear, rolling contact fatigue (RCF), and deformation under cyclic wheel&n...

(This article belongs to the Special Issue Fatigue Crack Growth in Metallic Materials)
  • Article
  • Open Access
28 Citations
3,599 Views
10 Pages

18 November 2022

Dilution rate is one of most important factors influencing the microstructure and performance of the laser cladding layer. In order to obtain a reasonable dilution rate in the laser cladding layer of Inconel 625 alloy, the laser cladding layers with...

  • Article
  • Open Access
14 Citations
2,965 Views
13 Pages

Fuzzy Control Modeling to Optimize the Hardness and Geometry of Laser Cladded Fe-Based MG Single Track on Stainless Steel Substrate Prepared at Different Surface Roughness

  • Maha M. A. Lashin,
  • Mahmoud Z. Ibrahim,
  • Muhammad Ijaz Khan,
  • Kamel Guedri and ,
  • Kuldeep K. Saxena and
  • Sayed M. Eldin
  • + 1 author+ 0 author

10 December 2022

Metallic glass (MG) is a promising coating material developed to enhance the surface hardness of metallic substrates, with laser cladding having become popular to develop such coatings. MGs properties are affected by the laser cladding variables (las...

(This article belongs to the Special Issue Laser Micro/Nano Fabrication)
  • Review
  • Open Access
62 Citations
6,391 Views
17 Pages

Microstructures, Corrosion Resistance and Wear Resistance of High-Entropy Alloys Coatings with Various Compositions Prepared by Laser Cladding: A Review

  • Kefeng Lu,
  • Jian Zhu,
  • Delin Guo,
  • Minghui Yang and ,
  • Huajian Sun,
  • Zekun Wang,
  • Xidong Hui and
  • Yongling Wu
  • + 3 authors+ 0 author

19 July 2022

Nowadays, high-entropy alloys (HEAs) have become a hot research topic in the field of coating materials. However, HEAs have a large wide range of compositional systems, and the differences in their composition inevitably lead to the significant varia...

  • Article
  • Open Access
2 Citations
4,287 Views
8 Pages

MOVPE-Grown Quantum Cascade Laser Structures Studied by Kelvin Probe Force Microscopy

  • Konstantin Ladutenko,
  • Vadim Evtikhiev,
  • Dmitry Revin and
  • Andrey Krysa

20 February 2020

A technique for direct study of the distribution of the applied voltage within a quantum cascade laser (QCL) has been developed. The detailed profile of the potential in the laser claddings and laser core region has been obtained by gradient scanning...

(This article belongs to the Special Issue MOVPE Growth of Crystalline Film)
  • Article
  • Open Access
10 Citations
3,689 Views
12 Pages

Analysis and Prediction of Melt Pool Geometry in Rectangular Spot Laser Cladding Based on Ant Colony Optimization–Support Vector Regression

  • Junhua Wang,
  • Jiameng Wang,
  • Xiaoqin Zha,
  • Yan Lu and ,
  • Kun Li,
  • Junfei Xu and
  • Tancheng Xie
  • + 2 authors+ 0 author

16 February 2025

The rectangular spot laser cladding system, due to its large spot size and high efficiency, has been widely applied in laser cladding equipment, significantly improving cladding’s efficiency. However, while enhancing cladding efficiency, the re...

(This article belongs to the Special Issue Integrated Photonics and Optoelectronics, 2nd Edition)
  • Article
  • Open Access
19 Citations
3,956 Views
20 Pages

28 January 2020

The purpose of this study was to demonstrate the novel technique of laser deposition of Fe-based powder under cryogenic conditions provided by a liquid nitrogen bath. Comparative clad layers were produced by conventional laser cladding at free coolin...

(This article belongs to the Special Issue Technology of Welding and Joining)
  • Article
  • Open Access
11 Citations
3,255 Views
18 Pages

Properties of Laser-Clad Stainless Steel–Ni/WC Double-Layer Coatings

  • Ruipeng Zhang,
  • Yuhong Liao,
  • Qingyi Sai,
  • Shuwen Wang and ,
  • David Barton and
  • Mingwen Bai
  • + 1 author+ 0 author

18 August 2024

In order to improve the wear and corrosion resistance and enhance the tribological and mechanical properties of gray cast iron, the laser surface cladding technique was employed to fabricate double-layer coatings with different Ni/WC ratios on the su...

  • Article
  • Open Access
25 Citations
2,930 Views
13 Pages

Effects of Electromagnetic Fields on the Microstructure of Laser Cladding

  • Yongjun Shi,
  • Xiaoyu Zhou,
  • Xiaogang Wang,
  • Xingteng Feng and
  • Laida Peng

13 June 2022

The fast heating and quenching of laser cladding increase the internal stresses in the cladding layer. Moreover, the quick condensation of the molten pool leads to an uneven distribution of the internal elements and coarse grains of the structure. To...

  • Article
  • Open Access
6 Citations
985 Views
14 Pages

A Comparative Study of the Microstructure and Properties of Al2CrFe2Ni4Ti1.5 Coatings Fabricated by Oscillating Laser Cladding Under Pulsed and Continuous Modes

  • Wei Liu,
  • Dongqing Li,
  • Jian Gu,
  • Guojun Xiao and ,
  • Yundong Zhao,
  • Zeyang Wang,
  • Hanguang Fu and
  • Kaiming Wang
  • + 3 authors+ 0 author

19 December 2025

As high-end equipment manufacturing advances, demand for improved surface performance in critical components has increased. Laser cladding is an advanced surface strengthening technique that affords effective surface modification. During the laser cl...

(This article belongs to the Section High-Energy Beam Surface Engineering and Coatings)
  • Article
  • Open Access
11 Citations
2,747 Views
18 Pages

23 December 2023

In this study, a titanium alloy substrate was cladded with TC17 titanium alloy powder using the pulsed-current (PC)-assisted laser cladding technique. The primary objective of this research was to assess the impact of varying pulsed current intensiti...

(This article belongs to the Collection Additive Manufacturing: Alloy Design and Process Innovations)
  • Article
  • Open Access
43 Citations
8,565 Views
12 Pages

Analysis of the Process Parameter Influence in Laser Cladding of 316L Stainless Steel

  • Piera Alvarez,
  • M. Ángeles Montealegre,
  • Jose F. Pulido-Jiménez and
  • Jon Iñaki Arrizubieta

Laser Cladding is one of the leading processes within Additive Manufacturing technologies, which has concentrated a considerable amount of effort on its development. In regard to the latter, the current study aims to summarize the influence of the mo...

(This article belongs to the Special Issue New Findings and Approaches in Machining Processes)
  • Article
  • Open Access
22 Citations
4,021 Views
18 Pages

Numerical Simulation Study of Multi-Field Coupling for Laser Cladding of Shaft Parts

  • Changlong Zhao,
  • Chen Ma,
  • Junbao Yang,
  • Ming Li and ,
  • Qinxiang Zhao,
  • Hongnan Ma and
  • Xiaoyu Jia
  • + 2 authors+ 0 author

20 February 2023

Since shaft parts operate under harsh environments for a long time, many critical parts suffer from corrosion, wear and other problems, leading to part failure and inability to continue in service. It is imperative to repair failed parts and increase...

  • Review
  • Open Access
27 Citations
5,263 Views
24 Pages

24 October 2024

High-hardness iron-based alloy coatings are extensively utilized in aerospace, automotive, and industrial equipment due to their exceptional wear resistance and long service life. Laser cladding has emerged as one of the primary techniques for fabric...

(This article belongs to the Special Issue Effects of Laser Treatment on Surface Characterization and Mechanical Properties of Alloys)
  • Article
  • Open Access
16 Citations
3,410 Views
15 Pages

Microstructure and Fatigue of EA4T Steel in Laser Cladding Remanufacturing

  • Wenjing Chen,
  • Qunyan Chen,
  • Zhenlin Zhang,
  • Sicheng Tang and
  • Qing Cai

3 August 2022

EA4T steel has been widely used in the manufacture of railway axles. Laser cladding remanufacturing technology has been used to repair railway axles, and the failure behaviors of railway axles has been studied. In this work, a class of original FeCrN...

(This article belongs to the Section High-Energy Beam Surface Engineering and Coatings)
  • Review
  • Open Access
30 Citations
3,750 Views
29 Pages

7 July 2025

Laser cladding, a cutting-edge surface modification technique for metals, offers a novel approach to enhancing the wear and corrosion resistance of substrates due to its rapid heating and cooling capabilities, precise control over coating thickness a...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
52 Citations
5,006 Views
17 Pages

15 September 2022

In this study, ultra-high-speed laser cladding (UHSLC) and traditional low-speed laser cladding (LSLC) were employed to prepare high-quality Inconel625 coatings on 27SiMn substrates. UHSLC has cladding speeds of 30 m/min, which are 15 times faster th...

(This article belongs to the Special Issue Coatings on Light Alloys Substrate)
  • Article
  • Open Access
24 Citations
4,469 Views
22 Pages

Optimization of Laser Cladding Parameters for High-Entropy Alloy-Reinforced 316L Stainless-Steel via Grey Relational Analysis

  • Senao Gao,
  • Qiang Fu,
  • Mengzhao Li,
  • Long Huang and ,
  • Nian Liu,
  • Chang Cui,
  • Bing Yang and
  • Guodong Zhang
  • + 3 authors+ 0 author

1 September 2024

Laser cladding technology serves as a pivotal technique in industrial production, especially in the realms of additive manufacturing, surface enhancement, coating preparation, and the repair of part surfaces. This study investigates the influence of...

(This article belongs to the Special Issue Research and Application of High Entropy Alloys)
  • Article
  • Open Access
19 Citations
5,656 Views
7 Pages

Orientation-Dependent Displacement Sensor Using an Inner Cladding Fiber Bragg Grating

  • Tingting Yang,
  • Xueguang Qiao,
  • Qiangzhou Rong and
  • Weijia Bao

11 September 2016

An orientation-dependent displacement sensor based on grating inscription over a fiber core and inner cladding has been demonstrated. The device comprises a short piece of multi-cladding fiber sandwiched between two standard single-mode fibers (SMFs)...

  • Review
  • Open Access
58 Citations
8,069 Views
32 Pages

Surface Modification of 42CrMo Steels: A Review from Wear and Corrosion Resistance

  • Zhendong Zhang,
  • Di Wang,
  • Guanglei Liu,
  • Yiyi Qian and ,
  • Yuquan Xu and
  • Dingding Xiang
  • + 1 author+ 0 author

12 March 2024

This work reviews surface modification techniques for improving the wear and corrosion resistance of 42CrMo steel. The advantages and disadvantages of various methods, including thermal spraying, deposition, hardfacing, laser cladding, nitriding, and...

(This article belongs to the Section Corrosion, Wear and Erosion)
  • Article
  • Open Access
44 Citations
14,904 Views
15 Pages

Corrosion Behavior of Inconel 625 Coating Produced by Laser Cladding

  • Mieczyslaw Scendo,
  • Katarzyna Staszewska-Samson and
  • Hubert Danielewski

24 June 2021

Anti-corrosion properties of Inconel 625 (In) laser cladding coatings onto the (S235JR) steel (S) were investigated. The coatings were produced with the use of wire (WIn/S) or powder (PIn/S). The mechanical properties of the Inconel 625 coatings were...

(This article belongs to the Special Issue Modern Trends in Corrosion Protection of Steels)
  • Article
  • Open Access
1 Citations
1,146 Views
17 Pages

Microstructure and Properties of Conventional Cast Versus Annular Laser-Clad Babbitt Alloy Layers for Sliding Bearings

  • Jing Jin,
  • Jun Ye,
  • Hao Xue,
  • Yongli Xu and ,
  • Zhongwai Guo,
  • Zhenghong Zhou,
  • Gaohuan Xu and
  • Guobiao Wang
  • + 3 authors+ 0 author

21 January 2026

Sliding bearing alloy layers must combine excellent tribological performance with reliable metallurgical bonding, but conventional fabrication methods often suffer from coarse grains, chemical segregation and poor interface adhesion. Annular coaxial...

(This article belongs to the Section D: Materials and Processing)
  • Review
  • Open Access
23 Citations
5,869 Views
29 Pages

Development and Research Status of Wear-Resistant Coatings on Copper and Its Alloys: Review

  • Fei Meng,
  • Yifan Zhou,
  • Hongliang Zhang,
  • Zhilan Wang and ,
  • Dehao Liu,
  • Shuhe Cao,
  • Xue Cui,
  • Zhisheng Nong,
  • Tiannan Man and
  • Teng Liu
  • + 5 authors+ 0 author

20 February 2025

Wear-resistant coatings applied to the surface of copper and copper alloys through diverse advanced technologies can substantially enhance their wear resistance and broaden their application spectrum. This paper provides a comprehensive review of the...

(This article belongs to the Special Issue Microstructure and Mechanical Behaviour of Structural Materials: 2nd Edition)
  • Article
  • Open Access
21 Citations
4,672 Views
11 Pages

Laser Cladding of Al0.5CoCrCuFeNiSi High Entropy Alloy Coating without and with Yttria Addition on H13 Steel

  • Jingda Liu,
  • Yuxin Guan,
  • Xuechen Xia,
  • Pai Peng and ,
  • Qifeng Ding and
  • Xiaotao Liu
  • + 1 author+ 0 author

20 April 2020

Al0.5CoCrCuFeNiSi high entropy alloy coating without and with a 1 wt.% Y2O3 addition was fabricated by laser cladding technique on H13 substrate. The results showed that the laser cladding coatings without and with Y2O3 addition consist of a mixture...

(This article belongs to the Special Issue Development of High Entropy Alloys)
  • Article
  • Open Access
7 Citations
3,196 Views
15 Pages

In Vitro Comparison of Bioactive Silicon Nitride Laser Claddings on Different Substrates

  • Elia Marin,
  • Matteo Zanocco,
  • Francesco Boschetto,
  • Toshiro Yamamoto and ,
  • Narisato Kanamura,
  • Wenliang Zhu,
  • Bryan J. McEntire,
  • Bhajanjit Sonny Bal,
  • Ryutaro Ashida and
  • Giuseppe Pezzotti
  • + 6 authors+ 1 author

17 December 2020

The performance, durability, and bio-integration of functional biomedical coatings can be enhanced by changing or improving their substrate properties. In this study, we applied silicon nitride powder-based laser claddings to various substrates and u...

(This article belongs to the Section Chemical and Molecular Sciences)
  • Article
  • Open Access
24 Citations
4,600 Views
8 Pages

Fabrication of Tapered Circular Depressed-Cladding Waveguides in Nd:YAG Crystal by Femtosecond-Laser Direct Inscription

  • Carolina Romero,
  • Javier García Ajates,
  • Feng Chen and
  • Javier R. Vázquez de Aldana

19 December 2019

Crystalline materials are excellent substrates for the integration of compact photonic devices benefiting from the unique optical properties of these materials. The technique of direct inscription with femtosecond lasers, as an advantage over other t...

(This article belongs to the Special Issue Femtosecond Laser Micromachining for Photonics Applications)
  • Article
  • Open Access
16 Citations
4,201 Views
20 Pages

Application of a New Alloy and Post Processing Procedures for Laser Cladding Repairs on Hypereutectoid Rail Components

  • Olivia Kendall,
  • Panahsadat Fasihi,
  • Ralph Abrahams,
  • Anna Paradowska and ,
  • Mark Reid,
  • Quan Lai,
  • Cong Qiu,
  • Peter Mutton,
  • Mehdi Soodi and
  • Wenyi Yan
  • + 5 authors+ 0 author

8 August 2022

The development of a laser cladding repair strategy is critical for the continued growth of heavy-haul railway networks. Premium hypereutectoid rails have undergone laser cladding using a new martensitic stainless-steel alloy, 415SS, developed for hi...

  • Article
  • Open Access
34 Citations
3,878 Views
22 Pages

27 August 2024

The use of laser cladding technology to prepare coatings of AlCoCrFeNi high-entropy alloy holds enormous potential for application. However, the cladding quality will have a considerable effect on the properties of the coatings. In this study, consid...

  • Article
  • Open Access
6 Citations
2,936 Views
14 Pages

19 December 2023

Wide-band laser cladding technology has emerged as a solution to the limitations of traditional cladding techniques, which are small single-path dimensions and low processing efficiency. The existing wide-band cladding technology presents challenges...

(This article belongs to the Special Issue Additive Manufacturing of Metallic Structures: Process and Applications)
  • Article
  • Open Access
3 Citations
2,626 Views
26 Pages

5 December 2023

Laser cladding is a powerful surface treatment technique that can significantly enhance the properties of metal alloys. This study delves into the liquid phase separation behavior of Cu-Fe-Cr alloys under the rapid solidification conditions inherent...

(This article belongs to the Section High-Energy Beam Surface Engineering and Coatings)
  • Article
  • Open Access
47 Citations
4,927 Views
13 Pages

Influence of the Laser Cladding Parameters on the Morphology, Wear and Corrosion Resistance of WC-Co/NiCrBSi Composite Coatings

  • Iosif Hulka,
  • Ion D. Uțu,
  • Diana Avram,
  • Mircea L. Dan and ,
  • Alexandru Pascu,
  • Elena M. Stanciu and
  • Ionuț C. Roată
  • + 2 authors+ 0 author

26 September 2021

To enhance the sliding wear and corrosion behavior of steels with low carbon content, cermet composite coatings are usually deposited on their surface by various deposition processes. Laser cladding, compared to other deposition techniques such as el...

(This article belongs to the Special Issue Metal Coatings for Wear and Corrosion Applications)
  • Communication
  • Open Access
965 Views
9 Pages

Electrochemical Surface Modification of Laser Cladded Ni-Based Single Crystal Superalloy in NaNO3 Solution

  • Jingbo Liu,
  • Yongxin Liu,
  • Xianqi Meng,
  • Linfeng Tang and ,
  • Xiaowei Lei and
  • Nan Wang
  • + 1 author+ 0 author

30 October 2025

Since mechanical processing can introduce stress in the sample, electrochemical dissolution has been utilized to attain shape accuracy in certain materials. However, this technique is rarely applied to laser-repaired Ni-based single-crystal superallo...

(This article belongs to the Special Issue Welding, Joining, and Additive Manufacturing of Metals and Alloys (Third Edition))
  • Article
  • Open Access
19 Citations
2,785 Views
25 Pages

2 August 2021

The purpose of this study was to demonstrate the effect of forced and localized cooling by nitrogen vapours stream under cryogenic conditions during laser deposition of WC-Ni powder on the geometry, microstructure of clad layers and dry sliding wear...

(This article belongs to the Special Issue Development of Laser Welding and Surface Treatment of Metals)
  • Article
  • Open Access
14 Citations
3,749 Views
17 Pages

26 July 2021

In order to enhance the bioactivity and wear resistance of titanium (Ti) and its alloy for use as an implant surface, a multilayer Ca/P (calcium/phosphorus) bio-ceramic coating on a Ti6Al4V alloy surface was designed and prepared by a laser cladding...

(This article belongs to the Special Issue Surface Modification Technology of Biomedical Metals)
  • Article
  • Open Access
13 Citations
2,592 Views
14 Pages

29 May 2024

Laser cladding technology is an effective surface modification technique. In order to prepare coating with excellent properties on the surface of the cold heading die punch, stellite-6 cladding coating with different proportions of Y2O3 was prepared...

(This article belongs to the Section Materials Processes)
  • Feature Paper
  • Article
  • Open Access
2 Citations
997 Views
16 Pages

High-Temperature Tribological and Oxidation Performance of a Cr-Al-C Composite Coating on H13 Steel by Laser Cladding

  • Shengshu Zuo,
  • Shibo Li,
  • Yixiong Zhang,
  • Xuejin Zhang and ,
  • Guoping Bei,
  • Faqiang Chen and
  • Dong Liu
  • + 2 authors+ 0 author

10 January 2026

Laser cladding is an effective surface engineering technique to enhance the high-temperature performance of metallic materials. In this work, a Cr-Al-C composite coating was in situ fabricated on H13 steel by laser cladding to alleviate the performan...

(This article belongs to the Special Issue Laser Additive Manufacturing of Coatings: Microstructure, Properties, and Applications)
  • Communication
  • Open Access
2,671 Views
10 Pages

Photo-Writable Sulfide Glasses Used to Fabricate Core-Clad Fiber Doped with Pr3+ for Mid-IR Luminescence

  • Julie Carcreff,
  • Virginie Nazabal,
  • Johann Troles,
  • Catherine Boussard-Plédel and ,
  • Pascal Masselin,
  • Florent Starecki,
  • Alain Braud,
  • Patrice Camy and
  • David Le Coq
  • + 4 authors+ 0 author

With the ultimate goal of developing rare-earth doped chalcogenide fiber fabrication for sensing, amplification, and laser applications, a core/clad germanium-gallium sulfide fiber doped with Pr3+ has been fabricated. The compositions of the core and...

(This article belongs to the Special Issue Rare-Earth-Doped Fiber Lasers and Amplifiers)
  • Editorial
  • Open Access
6 Citations
2,859 Views
3 Pages

1 April 2020

Among the additive layer manufacturing techniques for metals, those involving metal deposition, including laser cladding/Direct Energy Deposition (DED, with powder feeding) or Wire and Arc Additive Manufacturing (WAAM, with wire feeding), exhibit sev...

(This article belongs to the Special Issue Additive Layer Manufacturing using Metal Deposition)
  • Article
  • Open Access
12 Citations
2,406 Views
14 Pages

27 July 2023

Ni-Cr-Si-alloy-cladding layers with Si contents of 0 wt.%, 1 wt.%, 3 wt.% and 5 wt.% were prepared via a laser-cladding technique, and the effect of Si content on the high-temperature corrosion resistance of the Ni-20Cr-Si-alloy-cladding layers in Na...

(This article belongs to the Topic Materials for Corrosion Protection)
  • Review
  • Open Access
20 Citations
2,656 Views
26 Pages

Recent Advance on Metal Carbides Reinforced Laser Cladding Coatings

  • Dazhi Jiang,
  • Guangjin Wang,
  • Wei Dong,
  • Xiaodong Hong and
  • Chenguang Guo

18 April 2025

The laser cladding technique can be adapted to fabricate composite coatings on the surface of the metal substrate, which not only effectively improves the surface properties of materials, but also greatly expands their application range. Metal carbid...

(This article belongs to the Special Issue Electroanalysis of Biochemistry and Material Chemistry—2nd Edition)
  • Article
  • Open Access
133 Views
10 Pages

8 November 2026

This work investigates the sensing capabilities of a compact, all-in-fibre Mach–Zehnder interferometer (MZI) fabricated using femtosecond laser inscription. The device was created within the cladding region of a single-mode optical fibre, in cl...

(This article belongs to the Special Issue Science and Applications of Optical Fiber Sensors: Recent Advances and Future Trends, 2nd Edition)
  • Article
  • Open Access
44 Citations
3,504 Views
20 Pages

18 October 2021

316L steel is predominantly used in manufacturing the components of high-pressure boilers, heat exchangers, aerospace engines, oil and gas refineries, etc. Its notable percentage of chromium offers resistance against corrosion and is mostly implement...

  • Review
  • Open Access
47 Citations
8,954 Views
23 Pages

Ultrafast Laser Processing of Optical Fibers for Sensing Applications

  • Stephen J. Mihailov,
  • Cyril Hnatovsky,
  • Nurmemet Abdukerim,
  • Robert B. Walker and ,
  • Ping Lu,
  • Yanping Xu,
  • Xiaoyi Bao,
  • Huimin Ding,
  • Manny De Silva and
  • Dan Grobnic
  • + 6 authors+ 1 author

19 February 2021

A review of recent progress in the use of infrared femtosecond lasers to fabricate optical fiber sensors that incorporate fiber Bragg gratings (FBG) and random fiber gratings (RFG) is presented. The important advancements in femtosecond laser writing...

(This article belongs to the Section State-of-the-Art Sensors Technologies)
  • Article
  • Open Access
1 Citations
1,767 Views
31 Pages

2 March 2026

Wire–Laser Additive Manufacturing (WLAM) is a promising directed energy deposition technique for producing and repairing high-performance components with high material efficiency and strong metallurgical bonding. This study optimizes single-tra...

(This article belongs to the Special Issue Advances in Additive Manufacturing: Processes, Systems, and Emerging Horizons)

of 3