Skip to Content
You are currently on the new version of our website. Access the old version .

4,400 Results Found

  • Review
  • Open Access
142 Citations
27,290 Views
22 Pages

Friction Stir Processing of Particle Reinforced Composite Materials

  • Yong X. Gan,
  • Daniel Solomon and
  • Michael Reinbolt

11 January 2010

The objective of this article is to provide a review of friction stir processing (FSP) technology and its application for microstructure modification of particle reinforced composite materials. The main focus of FSP was on aluminum based alloys and c...

(This article belongs to the Special Issue Composite Materials)
  • Review
  • Open Access
115 Citations
14,057 Views
14 Pages

19 February 2019

Friction stir processing (FSP) is a novel solid-phase processing technique that is derived from friction stir welding (FSW). The microstructure of the base metal can be modified with the friction heat and stir function during processing. It can be us...

  • Article
  • Open Access
18 Citations
3,444 Views
13 Pages

Remanufacturing the AA5052 GTAW Welds Using Friction Stir Processing

  • Ghasem Azimi Roeen,
  • Sajjad Ghatei Yousefi,
  • Rahmatollah Emadi,
  • Mohsen Shooshtari and
  • Saeid Lotfian

1 May 2021

Progress in sustainable manufacturing is a crucial element to minimise negative environmental impacts. The conventional fusion weld process used to join aluminium alloys resulted in coarse grain structure, inevitable defects, and severe joint softeni...

(This article belongs to the Special Issue Microstructure, Deformation, and Fatigue Behavior in Metals)
  • Review
  • Open Access
33 Citations
6,355 Views
31 Pages

11 December 2021

FSP (friction stir processing) technology is a modern grain refinement method that is setting new trends in surface engineering. This technology is used not only to modify the microstructure of the surface layer of engineering materials, but increasi...

(This article belongs to the Section Composites Manufacturing and Processing)
  • Article
  • Open Access
17 Citations
4,664 Views
16 Pages

Influence of Friction Stir Processing on Mechanical Behavior of 2507 SDSS

  • Hafiz M. Abubaker,
  • Necar Merah,
  • Fadi A. Al-Badour,
  • Jafar Albinmousa and
  • Ahmad A. Sorour

12 March 2020

Duplex stainless steel (DSS) is used for desalination equipment, pressure vessels, marine applications, offshore applications, and in oil/gas plants where a highly corrosive environment is present. Super duplex stainless steel (SDSS) 2507 has excelle...

  • Article
  • Open Access
5 Citations
3,641 Views
12 Pages

Structure, Mechanical Properties and Friction Characteristics of the Al-Mg-Sc Alloy Modified by Friction Stir Processing with the Mo Powder Addition

  • Tatiana Kalashnikova,
  • Evgeny Knyazhev,
  • Denis Gurianov,
  • Andrey Chumaevskii and ,
  • Andrey Vorontsov,
  • Kirill Kalashnikov,
  • Natalya Teryukalova and
  • Evgeny Kolubaev
  • + 3 authors+ 0 author

15 June 2022

In this study, samples of Al-Mg-Sc alloy were investigated after friction stir processing with the addition of Mo powder. Holes were drilled into 5 mm-thick aluminum alloy sheets into which Mo powder was added at percentages of 5, 10, and 15 wt%. The...

(This article belongs to the Special Issue Mechanical Properties of Metals Welding Joints)
  • Article
  • Open Access
16 Citations
2,579 Views
18 Pages

Influence of Friction Stir Surface Processing on the Corrosion Resistance of Al 6061

  • Ibrahim H. Zainelabdeen,
  • Fadi A. Al-Badour,
  • Rami K. Suleiman,
  • Akeem Yusuf Adesina and ,
  • Necar Merah and
  • Fadi A. Ghaith
  • + 1 author+ 0 author

16 November 2022

In this work, friction stir processing using a pinless tool with a featured shoulder was performed to alter the surface properties of Al 6061-O, focusing on the effect of tool traverse speed on surface properties, i.e., microstructure, hardness, and...

(This article belongs to the Special Issue Corrosion Resistance Enhancement of the Materials Surface)
  • Article
  • Open Access
938 Views
20 Pages

Multi-Objective Optimization of the Geometry of a Modular Friction Disk Cutter for Thermo-Friction Processing of Spur Gear Teeth

  • Ansagan Suleimenov,
  • Karibek Sherov,
  • Assylbek Kassenov,
  • Assylkhan Mazdubay and ,
  • Jamshid Ravshanov,
  • Doniyor Isaev,
  • Musurmon Juraev,
  • Gulerke Tattimbek,
  • Sayagul Tussupova and
  • Zhanara Mussina
  • + 6 authors+ 1 author

This study presents multi-objective geometric optimization of a modular friction disk cutter for spur gear thermo-friction processing within the ANSYS Workbench 2024 R1. The integrated workflow—Geometry → Steady-State Thermal → Static...

  • Review
  • Open Access
56 Citations
7,089 Views
16 Pages

Friction Stir Processing Influence on Microstructure, Mechanical, and Corrosion Behavior of Steels: A Review

  • Neçar Merah,
  • Mohammed Abdul Azeem,
  • Hafiz M. Abubaker,
  • Fadi Al-Badour and ,
  • Jafar Albinmousa and
  • Ahmad A. Sorour
  • + 1 author+ 0 author

2 September 2021

Friction stir processing (FSP) technology has received reasonable attention in the past two decades to process a wide range of materials such as aluminum, magnesium, titanium, steel, and superalloys. Due to its thermomechanical processing nature, FSP...

(This article belongs to the Special Issue Surface Processing of Steels: Materials, Techniques and Applications)
  • Review
  • Open Access
42 Citations
8,345 Views
47 Pages

17 May 2023

A review of the state of research in the field of friction stir welding and processing has been carried out. The features of plastic flow in friction stir welding and their connection with the processes of adhesion friction are shown. The main direct...

(This article belongs to the Special Issue Recent Developments of Non-ferrous Alloys: Processing, Microstructure and Properties)
  • Article
  • Open Access
11 Citations
3,182 Views
16 Pages

21 December 2020

In the study, the friction stir processing (FSP) method was used to modify the surface layer of a tin-based bearing alloy. The modification was aimed at extending the service life of bearings by improving their tribological properties. The results of...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
17 Citations
3,248 Views
12 Pages

Tribological Characteristics of Al359/Si3N4/Eggshell Surface Composite Produced by Friction Stir Processing

  • Ashish Kumar Srivastava,
  • Suryank Dwivedi,
  • Ambuj Saxena,
  • Deepak Kumar and ,
  • Amit Rai Dixit,
  • Gyanendra Kumar Singh,
  • Javed Khan Bhutto and
  • Rajesh Verma
  • + 3 authors+ 0 author

18 September 2022

In the present study, the surface composite Al359/Si3N4/Eggshell is prepared by friction stir processing (FSP). The effect of reinforced particle volume fraction on the microstructural and tribological properties of the Al359/Si3N4/Eggshell surface c...

(This article belongs to the Special Issue Research Progress of Metals and Alloys by Thermal Layering and Deposition)
  • Article
  • Open Access
13 Citations
3,882 Views
14 Pages

A New Approach to Direct Friction Stir Processing for Fabricating Surface Composites

  • Abdulla I. Almazrouee,
  • Khaled J. Al-Fadhalah and
  • Saleh N. Alhajeri

2 June 2021

Friction stir processing (FSP) is a green fabrication technique that has been effectively adopted in various engineering applications. One of the promising advantages of FSP is its applicability in the development of surface composites. In the curren...

(This article belongs to the Special Issue Fabrication of Carbon and Related Materials/Metal Hybrids and Composites)
  • Article
  • Open Access
12 Citations
4,764 Views
25 Pages

Evaluation of the Degree of Degradation of Brake Pad Friction Surfaces Using Image Processing

  • Teodor Mandziy,
  • Iryna Ivasenko,
  • Olena Berehulyak,
  • Roman Vorobel and ,
  • Michał Bembenek,
  • Sviatoslav Kryshtopa and
  • Liubomyr Ropyak
  • + 2 authors+ 0 author

The improvement of drilling rig systems to ensure a reduction in unproductive time spent on lowering and lifting operations for replacing drilling tools and restoring the performance of drilling equipment units is an important task. At the same time,...

  • Article
  • Open Access
12 Citations
2,672 Views
17 Pages

10 February 2022

This work aims to optimize the friction stir processing parameters of recycled aluminum alloy 6063 for enhanced mechanical and tribological properties. The selected friction stir processing parameters that were used to produce friction stir processed...

(This article belongs to the Special Issue Surface Modification of Metallic Materials for Wear and Fatigue)
  • Article
  • Open Access
4 Citations
2,289 Views
11 Pages

9 June 2024

The motive of present work is to explore the variation in the material characteristics of steel upon multi-pass friction stir processing. Steel plates (IS2062) that were 3 mm thick, were subjected to friction stir processing in a multi-pass manner. T...

  • Review
  • Open Access
2 Citations
1,112 Views
86 Pages

Friction stir welding (FSW) began as a fairly specialized joining method, but over the past three decades it has evolved into something considerably more versatile, a manufacturing platform that now handles complex multi-material assemblies and solid...

(This article belongs to the Special Issue Recent Advances in Welding and Joining Metallic Materials)
  • Review
  • Open Access
127 Citations
11,926 Views
35 Pages

A Review of Friction Stir Processing of Structural Metallic Materials: Process, Properties, and Methods

  • Anna P. Zykova,
  • Sergei Yu. Tarasov,
  • Andrey V. Chumaevskiy and
  • Evgeniy A. Kolubaev

9 June 2020

Friction stir processing (FSP) has attracted much attention in the last decade and contributed significantly to the creation of functionally graded materials with both gradient structure and gradient mechanical properties. Subsurface gradient structu...

(This article belongs to the Special Issue Casting and Solidification of Light Alloys)
  • Proceeding Paper
  • Open Access
3 Citations
1,828 Views
5 Pages

Reinforcement of SiC Particles on Friction Stir Processing of Aluminium AA7050

  • Ramesh Arwin,
  • Sunil Abraham,
  • Praveen Rajendran and
  • Ram Prakash Shanmugasundaram

16 February 2024

Friction stir processing (FSP) is a solid-state processing technique used to refine the microstructures of metallic alloys. It involves inserting a rotating tool into the material, which generates heat and plastic deformation, leading to the recrysta...

(This article belongs to the Proceedings of The International Conference on Processing and Performance of Materials (ICPPM 2023))
  • Review
  • Open Access
92 Citations
7,654 Views
35 Pages

Friction Stir Welding/Processing of Mg-Based Alloys: A Critical Review on Advancements and Challenges

  • Farzad Badkoobeh,
  • Hossein Mostaan,
  • Mahdi Rafiei,
  • Hamid Reza Bakhsheshi-Rad and
  • Filippo Berto

8 November 2021

Friction stir welding (FSW) and friction stir processing (FSP) are two of the most widely used solid-state welding techniques for magnesium (Mg) and magnesium alloys. Mg-based alloys are widely used in the railway, aerospace, nuclear, and marine indu...

(This article belongs to the Section Advanced Materials Characterization)
  • Feature Paper
  • Article
  • Open Access
6 Citations
3,021 Views
11 Pages

A Novel Study on the Effect of Tool Offset in Friction Stir Processing for Mg-NiTi Composite

  • Nadeem Fayaz Lone,
  • Dhruv Bajaj,
  • Namrata Gangil,
  • Sohail M. A. K. Mohammed and ,
  • Daolun Chen and
  • Arshad Noor Siddiquee
  • + 1 author+ 0 author

17 November 2022

Mg-NiTi-based metal matrix composites are appropriate solutions for the two most important goals of material engineers in the present day, i.e., imparting functional behaviour and the light weighting of metallic structures. In recent years, due to it...

(This article belongs to the Special Issue Metals Manufacturing Techniques: Processing, Microstructure and Properties)
  • Article
  • Open Access
8 Citations
3,223 Views
19 Pages

Realizing a Novel Friction Stir Processing-Enabled FWTPET Process for Strength Enhancement Using Firefly and PSO Methods

  • Senthil Kumaran S,
  • Jayakumar Kaliappan,
  • Kathiravan Srinivasan,
  • Yuh-Chung Hu and ,
  • Sanjeevikumar Padmanaban and
  • Srinivasan N
  • + 1 author+ 0 author

5 February 2020

The friction welding of tube to tube plate using an external tool (FWTPET) is widely deployed in several industrial applications, such as aerospace, automotive, and power plants. Moreover, for achieving a better tensile strength and hardness in the w...

(This article belongs to the Collection Welding and Joining Processes of Materials)
  • Article
  • Open Access
15 Citations
3,145 Views
14 Pages

High Strain Rate Superplasticity of WE54 Mg Alloy after Severe Friction Stir Processing

  • Marta Álvarez-Leal,
  • Fernando Carreño,
  • Alberto Orozco-Caballero,
  • Pilar Rey and
  • Oscar A. Ruano

25 November 2020

Friction stir processing (FSP) was used on coarse-grained WE54 magnesium alloy plates of as-received material. These were subjected to FSP under two different cooling conditions, refrigerated and non-refrigerated, and different severe processing cond...

(This article belongs to the Special Issue High-Temperature Behavior of Metals)
  • Article
  • Open Access
1 Citations
4,128 Views
13 Pages

Investigation of Friction Hydro-Pillar Processing as a Repair Technique for Offshore Mooring Chain Links

  • Rafael Eugenio dos Santos,
  • Mariane Chludzinski,
  • Rafael Menezes Nunes,
  • Ricardo Reppold Marinho and ,
  • Marcelo Torres Piza Paes and
  • Afonso Reguly
  • + 1 author+ 0 author

Repairing links of offshore mooring chains has presented a significant industry challenge, primarily arising from modifications in material properties, encompassing alterations in microstructure, hardness, and residual stress. In this context, the pr...

  • Article
  • Open Access
33 Citations
4,001 Views
19 Pages

Microstructure and Properties of Aluminum–Graphene–SiC Matrix Composites after Friction Stir Processing

  • Chen Wang,
  • Xianyong Zhu,
  • Yuexiang Fan,
  • Jiaan Liu and ,
  • Liangwen Xie,
  • Cheng Jiang,
  • Xiong Xiao,
  • Peng Wu and
  • Xiangmi You
  • + 4 authors+ 0 author

20 February 2024

Enhancing the mechanical properties of conventional ceramic particles-reinforced aluminum (Al 1060) metal matrix composites (AMCs) with lower detrimental phases is difficult. In this research work, AMCs are reinforced with graphene nanosheet (GNS) an...

(This article belongs to the Section Metals and Alloys)
  • Review
  • Open Access
54 Citations
7,352 Views
23 Pages

The eventual material degradation of steel components in bio-implant, marine, and high-temperature applications is a critical issue that can have widespread negative ramifications from a safety and economic point of view. Stemming from their tribolog...

(This article belongs to the Special Issue Anniversary Review and Feature Papers)
  • Article
  • Open Access
6 Citations
3,602 Views
12 Pages

Superplastic Behavior of Overaged 2024 Aluminum Alloy after Friction Stir Processing

  • Alberto Orozco-Caballero,
  • Marta Álvarez-Leal,
  • Fernando Carreño and
  • Oscar A. Ruano

3 November 2022

A commercial 2024 aluminum alloy was heat treated at 280 °C for 48 h and then slow cooled in a furnace to obtain minimum hardness. This material was then friction stir processed (FSP) using three sets of processing conditions. To study the effect...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
16 Citations
2,316 Views
14 Pages

Microstructural Aspects of the Fabrication of Al/Al2O3 Composite by Friction Stir Processing

  • Sergey S. Malopheyev,
  • Ivan S. Zuiko,
  • Sergey Yu. Mironov and
  • Rustam O. Kaibyshev

5 April 2023

The purpose of this work was the examination of microstructural evolution during the fabrication of an Al/Al2O3 composite by friction stir processing (FSP). In order to obtain new insight into this process, a longitudinal section of the produced comp...

(This article belongs to the Special Issue Progress on Metal Matrix Composite: Design, Processing and Application)
  • Review
  • Open Access
30 Citations
3,403 Views
24 Pages

Critical Review on Advanced Cooling Strategies in Friction Stir Processing for Microstructural Control

  • Md Saad Patel,
  • R. Jose Immanuel,
  • Ariful Rahaman,
  • Mohammad Faseeulla Khan and
  • Mustapha Jouiad

17 July 2024

Friction stir processing (FSP) stands as an effective approach designed for grain refinement and site-specific microstructural modification. The evolving microstructure during FSP is determined by various variables out of which rate of sample cooling...

(This article belongs to the Special Issue Additive Manufacturing: Experiments, Simulations and Data-Driven Modelling)
  • Article
  • Open Access
67 Citations
10,150 Views
17 Pages

28 February 2014

Hot-rolled AZ31 (Mg-2.57Al-0.84Zn-0.32Mn, in mass percentage) magnesium alloy is subjected to friction stir processing in air (normal friction stir processing, NFSP) and under water (submerged friction stir processing, SFSP). Thermal history of the t...

(This article belongs to the Special Issue Light Alloys and Their Applications)
  • Article
  • Open Access
23 Citations
4,039 Views
14 Pages

Towards Understanding the Relationships between Processing Conditions and Mechanical Performance of the Additive Friction Stir Deposition Process

  • Malcolm B. Williams,
  • Ning Zhu,
  • Nick I. Palya,
  • Jacob B. Hoarston and ,
  • Martin M. McDonnell,
  • Matthew R. Kelly,
  • Aaron D. Lalonde,
  • Luke N. Brewer,
  • James B. Jordon and
  • Paul G. Allison
  • + 5 authors+ 0 author

28 September 2023

In this research, we explore the preliminary effects of processing conditions using a novel additive manufacturing (AM) process, known as additive friction stir deposition (AFSD), on resulting build direction (BD) mechanical performance. Using the AF...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
18 Citations
3,453 Views
19 Pages

Thermo-Mechanical Modelling of Friction Stir Processing of AZ91 Alloy: Using Smoothed-Particle Hydrodynamics

  • Roshan Vijay Marode,
  • Srinivasa Rao Pedapati,
  • Tamiru Alemu Lemma and
  • Venkata Somi Reddy Janga

8 December 2022

A thermo-mechanical model of friction stir processing (FSP) using the Altair based on meshless Smoothed-Particle Hydrodynamics (SPH) was developed and verified experimentally. Process parameters adopted for both experimentation and simulation during...

(This article belongs to the Special Issue Friction Stir Processing of Structural Metallic Materials)
  • Article
  • Open Access
27 Citations
6,159 Views
13 Pages

Friction Stir Processing of Additively Manufactured Ti-6Al-4V Alloy: Structure Modification and Mechanical Properties

  • Kirill Kalashnikov,
  • Andrey Chumaevskii,
  • Tatiana Kalashnikova,
  • Andrey Cheremnov and ,
  • Evgeny Moskvichev,
  • Alihan Amirov,
  • Vladimir Krasnoveikin and
  • Evgeny Kolubaev
  • + 3 authors+ 0 author

27 December 2021

This work explores the possibility of using friction stir processing to harden the Ti-6Al-4V titanium alloy material produced by wire-feed electron beam additive manufacturing. For this purpose, thin-walled workpieces of titanium alloy with a height...

(This article belongs to the Special Issue Light Metals and Their Composites)
  • Article
  • Open Access
3 Citations
2,573 Views
11 Pages

Structural Changes in Block-Shaped WEBAM’ed Ti6Al4V Samples after Friction Stir Processing

  • Tatiana Kalashnikova,
  • Andrey Cheremnov,
  • Aleksander Eliseev,
  • Denis Gurianov and ,
  • Evgeny Knyazhev,
  • Evgeny Moskvichev,
  • Vladimir Beloborodov,
  • Andrey Chumaevskii,
  • Anna Zykova and
  • Kirill Kalashnikov
  • + 5 authors+ 0 author

4 December 2022

In this paper, the structure and mechanical properties of workpieces made of Ti6Al4V alloy in the shape of blocks manufactured by wire-feed electron beam additive manufacturing and processed by friction stir processing were investigated. Samples were...

(This article belongs to the Special Issue Friction Stir Processing of Structural Metallic Materials)
  • Article
  • Open Access
13 Citations
6,008 Views
14 Pages

Enhancing Corrosion and Wear Resistance of AA6061 by Friction Stir Processing with Fe78Si9B13 Glass Particles

  • Lingyu Guo,
  • Yan Liu,
  • Kechang Shen,
  • Chaoqun Song and ,
  • Min Yang,
  • Kibuem Kim and
  • Weimin Wang
  • + 2 authors+ 0 author

7 August 2015

The AA6061-T6 aluminum alloy samples including annealed Fe78Si9B13 particles were prepared by friction stir processing (FSP) and investigated by various techniques. The Fe78Si9B13-reinforced particles are uniformly dispersed in the aluminum alloy ma...

  • Article
  • Open Access
6 Citations
2,321 Views
16 Pages

6 June 2022

This work aims to determine and select the suitable friction stir processing parameters for recycled aluminum alloy 6063 surface composites reinforced with titanium dioxide for better tribological performance. A medium range of processing parameters...

(This article belongs to the Special Issue Surface Modification of Metallic Materials for Wear and Fatigue)
  • Article
  • Open Access
14 Citations
3,208 Views
20 Pages

Inhomogeneous Microstructure Evolution of 6061 Aluminum Alloyat High Rotating Speed Submerged Friction Stir Processing

  • Yuchen Peng,
  • Zonghua Xie,
  • Changchao Su,
  • Yuefang Zhong and ,
  • Zushan Tao,
  • Dongyang Zhuang,
  • Jiahui Zeng,
  • Hongqun Tang and
  • Zhengbing Xu
  • + 4 authors+ 0 author

6 January 2023

An inhomogeneous microstructure induced by high rotating speed submerged friction stir processing (HRS-SFSP) on 6061 aluminum alloy was researched in detail.The microstructures of the aluminum alloy processing zone were characterized by electron back...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
7 Citations
1,996 Views
17 Pages

12 June 2024

Friction stir processing (FSP) was performed on an AZ91 magnesium alloy cladding layer fabricated by a cold metal transfer (CMT) technique. Electrochemical properties and immersion corrosion behavior of the cladding layer before and after FSP in 3.5...

(This article belongs to the Special Issue Advances in Materials Joining and Additive Manufacturing)
  • Review
  • Open Access
15 Citations
2,362 Views
39 Pages

Friction Stir Processing: An Eco-Efficient Route to High-Performance Surface Architectures in MMCs

  • Sachin Kumar Sharma,
  • Saša Milojević,
  • Lokesh Kumar Sharma,
  • Sandra Gajević and ,
  • Yogesh Sharma,
  • Mohit Sharma,
  • Stefan Čukić and
  • Blaža Stojanović
  • + 3 authors+ 0 author

15 January 2026

Friction Stir Processing (FSP) has emerged as an advanced solid-state surface engineering technique for tailoring high-performance surface architectures in metal matrix composites (MMCs). By combining localized thermo-mechanical deformation with cont...

(This article belongs to the Section Materials Processes)
  • Article
  • Open Access
5 Citations
2,664 Views
14 Pages

28 October 2020

The AA6082–AA8011 friction stir-welded joints were subjected to submerged multiple pass friction stir processing to evaluate the microstructure and mechanical properties of the joints. A maximum of four submerged friction stir processed passes...

(This article belongs to the Special Issue Advanced Process Technologies Based on Friction Stir Welding and Linear Friction Welding)
  • Article
  • Open Access
3 Citations
3,043 Views
20 Pages

2 October 2020

Friction stir processing is a novel solid-state process to modify microstructures and their properties by intense, localized plastic deformation. However, little research has been reported for microstructure evolutions of advanced high-strength steel...

(This article belongs to the Special Issue Structure and Mechanical Properties of Alloys)
  • Article
  • Open Access
8 Citations
2,560 Views
11 Pages

Stretch Formability of an AZ61 Alloy Plate Prepared by Multi-Pass Friction Stir Processing

  • Xicai Luo,
  • Haolin Liu,
  • Limei Kang,
  • Jielin Lin and ,
  • Yifei Liu,
  • Datong Zhang,
  • Dongyang Li and
  • Daolun Chen
  • + 3 authors+ 0 author

9 June 2021

The stretch formability behavior of an AZ61 magnesium alloy plate produced by multi-pass friction stir processing (M-FSP) was investigated, with the applied load vs. displacement curves recorded during Erichsen cupping tests at different punching spe...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
34 Citations
4,175 Views
13 Pages

Microstructure and Properties of Nano-Hydroxyapatite Reinforced WE43 Alloy Fabricated by Friction Stir Processing

  • Genghua Cao,
  • Lu Zhang,
  • Datong Zhang,
  • Yixiong Liu and ,
  • Jixiang Gao,
  • Weihua Li and
  • Zhenxing Zheng
  • + 2 authors+ 0 author

16 September 2019

This research mainly focuses on the successful fabrication of nano-hydroxyapatite (nHA) reinforced WE43 alloy by two-pass friction stir processing (FSP). Microstructure evolution, mechanical properties, and in vitro corrosion behavior of FSPed WE43/n...

(This article belongs to the Special Issue Absorbable Metals for Biomedical Applications)
  • Article
  • Open Access
9 Citations
5,494 Views
18 Pages

The present study examines the fatigue of friction stir welded (FSW) aluminum 6061, 7075, 1060 joints followed by (i) in situ and sequential rolling (SR) processes, (ii) plastic burnishing (iii) solution-treatment artificial aging (STA), (iv) local a...

(This article belongs to the Special Issue Frontiers in Friction Stir Welding and Processing)
  • Article
  • Open Access
41 Citations
5,254 Views
12 Pages

2 March 2017

Friction stir processing (FSP) has been considered as a novel technique to refine the grain size and homogenize the microstructure of metallic materials. In this study, two-pass FSP was conducted under water to enhance the cooling rate during process...

  • Article
  • Open Access
19 Citations
3,068 Views
16 Pages

Fabrication of Cu/SiC Surface Composite via Thermo-Mechanical Process (Friction Stir Processing) for Heat Sink Application

  • Harikishor Kumar,
  • Abhishek Agarwal,
  • Michel Kalenga Wa Kalenga,
  • Rabindra Prasad and ,
  • Parshant Kumar,
  • L. Aslesha Chilakamarri and
  • Balram Yelamasetti
  • + 2 authors+ 0 author

6 March 2025

For the busting of heat, generated in electronic packages, relevant materials need to be developed. Metal matrix composites may be considered as an option to tailor the properties of a material (Cu) by incorporating an additional phase (SiC) for fulf...

(This article belongs to the Special Issue Alloys and Composites: Structural and Functional Applications, Second Edition)
  • Article
  • Open Access
3 Citations
3,147 Views
11 Pages

12 September 2019

A double reinforced layer on an aluminum alloy surface was produced using friction stir processing (FSP) by adding 34CrNiMo6 powder into Al (AA2024) substrate for better wear resistance and gradient transitions. The microstructures of the composites...

  • Article
  • Open Access
8 Citations
1,843 Views
18 Pages

23 April 2024

The article presents an assessment of the possibility of using ashes from the combustion of coal and biomass as a reinforcing phase in metal matrix composites. The composite surface layer was produced by means of the FSP (friction stir processing) me...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
11 Citations
6,359 Views
20 Pages

22 August 2018

The present work examined the effect of artificial aging on the microstructure, texture, and hardness homogeneity in aluminum alloy AA6082 subjected to friction stir processing (FSP). Aging was applied to FSP samples at three different temperatures (...

  • Article
  • Open Access
3 Citations
2,094 Views
19 Pages

30 December 2024

This study aimed to optimize friction stir processing parameters to enhance the mechanical properties of AA 5083/coal composites, a novel material combination with potential applications in marine environments. By systematically varying process param...

(This article belongs to the Section Crystalline Metals and Alloys)

of 88