The occurrence of non-deformable, non-metallic inclusions is the dominant reason for failure of wire during drawing and degrades service life for some steel grades, e.g., tire cord steel. To investigate the deformability of glassy inclusions in CaO-A...
Cord steel is used for making tire frames and wire saws for cutting silicon wafers. The diameter of mainstream cutting wire has been developed to be lower than 100 μm. The size and deformation ability of inclusions are very important to the wire brea...
Industrial tests and thermodynamic calculations were utilized to investigate the source and formation of magnetic particle inspection defects identified on the near-surface of the Cr5 back-up roll forged ingot, which was used in large cold rolling mi...
The relationship between slag structure and viscosity is studied, employing Raman spectroscopy for the five-component slag system of MnO-SiO2-CaO-Al2O3-MgO and its subsystems. This study aims to investigate the influence of variations in slag composi...
Due to the increasing demand for electromobility, the recovery of technologically relevant elements from spent Li-ion batteries is becoming increasingly important. Pyrometallurgical processing can deal with a broad range of input materials. Unfortuna...
Medium- and high-Mn steels have excellent properties but are very difficult to be commercially produced because of the high content of some alloy elements. To enhance the understanding of the reaction between medium/high-Mn steel and refining slag wh...
Considering the electromagnetic protection needs of important ground buildings, exploring the electromagnetic wave (EMW) absorption performance of manganese ore powder (MOP) building materials is an effective way to overcome its low added value and d...
Negative thermal expansion (NTE) ceramics Sm0.85Zn0.15MnO3 (SZMO) and ZrMgMo3O12 (ZMMO) were selected to prepare Sm0.85Zn0.15MnO3-ZrMgMo3O12/Al-20Si (SZMO-ZMMO/Al-20Si) composites using ball milling and vacuum heating-press sintering processes in thi...
This work reports the preparation and application of Fe2O3-SiO2-PAN nanocomposite for the removal of Cr3+, Cu2+, Al3+, Ba2+, Zn2+, Ni2+, Mn2+, Co2+, and Ti3+ from seawater. X-ray diffraction (XRD), scanning electron microscope/energy dispersive X-ray...
Nanosized spinel ferrites MFe2O4 (M = Mn, Co, Ni, Cu, Zn)-coated flaky FeSiAl alloy composites were synthesized successfully. Nano-ferrites preferentially grow into nanoplatelets due to induced or restricted growth on the flaky surface of FeSiAl. Wit...
How to utilize low grade complex iron resources is an issue that has attracted much attention due to the continuous and huge consumption of iron ores in China. High-aluminum iron ore is a refractory resource and is difficult to upgrade by separating...
Fast high-temperature gas-phase reactions occurring in the limited space of the arc cavity in the submerged arc welding (SAW) process limit the study of specific gas-phase behaviours. A low-temperature experimental method is applied to investigate ga...
A low-cost and high-efficiency solid reaction method has been reported as an effective technology to synthesize manganese ferrite MnFe2O4 with a spinel crystal structure. This work clarified the underlying reason for the influence mechanism of SiO2 a...
In this study, the behavior of sodium silicate (Na2SiO3), manganese sulfate monohydrate (MnSO4·H2O), and ammonium metavanadate (NH4VO3) as corrosion inhibitors for AA6061 aluminum alloy (Al) was investigated. The polarization resistance (Rp) o...
To understand the reaction mechanism between high Mn-high Al steel and slag, the reaction experiment of Fe-Mn-Al melts with CaO-SiO2-type flux was carried out in MgO crucible at 1873 K. The evolution of the morphology of interface was inspected first...
Slags from the metallurgical recycling process are an important source of resources classified as critical elements by the EU. One example is lithium from Li-ion battery recycling. In this context, the thermodynamic properties of the recycled compone...
The inclusions formed in 304L stainless steel for nuclear power produced by the electric arc furnace (EAF)-argon oxygen decarburization furnace (AOD)-ladle furnace (LF)-continuous casting (CC) process were investigated by thermodynamics calculations...
Deoxidation of liquid steel is a key link that affects the quality of environmentally friendly free-cutting steel. The selection and addition sequence of deoxidizer affects the composition, size, distribution, and morphology of non-metallic inclusion...
The greater demand for high-quality iron ores has forced the iron and steel industries to utilize low-grade iron ores, such as banded hematite quartzite (BHQ). In the present work, a striped hematite quartzite sample from the Haraginadoni area, in th...
The crystal structure of two different samples of pyrope garnet, ideally Mg3Al2Si3O12, from South Africa was refined using the Rietveld method, space group
Two new monoclinic (P21/m) epidote supergroup minerals manganiakasakaite-(La) and ferriakasakaite-(Ce) were found in the small Mn ore deposit of Monte Maniglia, Bellino, Varaita Valley, Cuneo Province, Piedmont, Italy. Manganiakasakaite-(La) occurs a...
In order to investigate the causes of the large number of cracks and porosities formed in 33MnCrTiB fork flat steel produced by a special steel plant, scanning electron microscopy (SEM), energy dispersive spectrometer (EDS) analysis, and large sample...
The production of silicon steel involves complex metallurgical processes, where the kind, composition, size, and quantity of the inclusions generated affect the silicon steel properties. This article is based on the smelting process for W350 non-orie...
The viscosity, melting proprieties, and molten structure of the high-Al silicon–manganese slag of SiO2–CaO–25 mass% Al2O3–MgO–MnO–K2O system with a varying MgO and K2O content were studied. The results show that wi...
A new molecular theory of slag suggests that complex oxides in the phase diagram are also present in liquid slag. In contrast to the ion‒molecule coexistence theory, basic oxides (CaO, MgO, MnO, FeO, etc.) in slag are considered to agglomerate...
Rutile TiO2, VO2, CrO2, MnO2, NbO2, RuO2, RhO2, TaO2, OsO2, IrO2, SnO2, PbO2, SiO2, and GeO2 (space group P42/mnm) were explored for thermal shock resistance applications using density functional theory in conjunction with acoustic phonon models. Fou...
The gas shale in the Lower Silurian Longmaxi Formation contains a considerable amount of biogenic silica. Various originated silicas in shale, derived from different depositional environment, are commonly associated with different degrees of organic...
Compared to the conventional deoxidation process with Al or Si-Mn for 55SiCr spring steel production, the possibility of using a Si-Ca-Ba compounded deoxidizer to control the behavior of non-metallic inclusions in spring steel was explored in this st...
Silica-bearing magnetite was recognized in the Copiapó Nordeste prospect as the first documented occurrence in Chilean iron oxide–copper–gold (IOCG) deposits. The SiO2-rich magnetite termed silician magnetite occurs in early calcic to potassic altera...
Electric-furnace smelting has become the dominant process for the production of the titanium slag from ilmenite in China. The crystallization behaviors of anosovite and silicate crystals in the high CaO and MgO titanium slag were studied to insure sm...
To study the evolution of non-metallic inclusions in 27SiMn steel, the 27SiMn steel produced using the LD-LF-CCM process was sampled in various stages in a steel factory. The evolutionary behavior of inclusion in various processes was systematically...
The aluminothermic reduction process of manganese oxide from different slags by aluminum was investigated using pure Al and two types of industrial Al dross. Two types of MnO-containing slags were used: a synthetic highly pure CaO-MnO slag and an ind...
Ferroalloys are integral constituents of the steelmaking process, since non-metallic inclusions (NMIs) from ferroalloys significantly influence the transformation of inclusions present in liquid steel or they are directly involved in casted steel. In...
At present, the vesuvianite group of minerals consists of eight members, six of which are distinguished by the dominant cation in the Y1(A,B) five-coordinated site. We investigated two vesuvianite samples from the type locality by electron microprobe...
Cortesognoite (IMA 2014-029), CaV2Si2O7(OH)2·H2O, is a new vanadium silicate mineral that occurs within V-bearing lawsonite in association with vanadiocarpholite, chalcocite, quartz, minor poppiite, roscoelite, vanadomalayaite and volborthite in a si...
Quartz is one of the most common minerals in soils, mostly present in sand and silt fractions. Although quartz is basically formed of SiO2, other elements can be easily detected and assessed nowadays using a portable X-ray fluorescence (pXRF) spectro...
A geochemical mapping of regional modern river-sand is performed to clarify geological information in the study area of Timor-Leste. Several areas of Timor-Leste including the study area in particular have limited geological information due to limite...
In wet flue gas desulfurization and denitrification processes, nitrite accumulation inhibits denitrification efficiency and induces secondary pollution due to its acidic disproportionation. This study developed a Mn-modified ZSM-5 zeolite catalyst, a...
In order to determine strategies for removing arsenic from rare earth arsenic-containing steels, the evolution of inclusions in the whole steelmaking process with alumina crucibles was investigated. It has been proven that adding lanthanum has a sign...
The evolution of inclusions that contain Al, Mg, and Ti was studied through industrial-grade experiments. Field emission scanning electron microscopy, energy dispersive spectrometry, inductively coupled plasma atomic emission spectrometry, and FactSa...
Nanostructures with graphene make them highly promising for nanoelectronics, memristor devices, nanosensors and electrodes for energy storage. In some devices the mechanical properties of graphene are important. Therefore, nanoindentation has been us...
The corrosion of structural materials is a crucial issue of the application of supercritical carbon dioxide in the Brayton power cycle system. The oxidation and carburization behaviors of typical alloy materials in high-temperature CO2 environments a...
Highly developed countries generate large volumes of industrial waste, the type and quantity of which are strongly linked to the characteristics of the industries that produce it. Industrial waste can adversely affect the environment, so its disposal...
The Cr2O3 film on the outer surface of traditional cracking furnace tubes is prone to spalling, which shortens the tube life. Fe-Ni-Cr-based austenitic stainless steel (AFA alloy) with added Al has attracted attention because it can form a more stabl...
The main problem affecting the life of refractory linings in furnaces is alkaline corrosion formed during biomass combustion, especially in systems with SiO2–Al2O3. This corrosion effect is very intensive compared to using conventional technolo...
Zirconia is a promising material for dental implants; however, an appropriate surface modification procedure has not yet been identified. Atomic layer deposition (ALD) is a nanotechnology that deposits thin films of metal oxides or metals on material...
The formation and characteristics of non-metallic inclusions in 304L stainless steel during the vacuum oxygen decarburization (VOD) refining process were investigated using industrial experiments and thermodynamic calculations. The compositional char...
The broader Philippi area (NE Macedonia, Northern Greece), which was chosen for the present study, is characterized by the presence of various metals. An approach to the correlation of selected parameters (grain-size distribution, Al2O3, CaO, Fe2O3,...
The effects of slag components on the sulfur distribution ratio {(wt.%S)/[wt.%S]} were analyzed using thermodynamic calculations. On this basis, the effects of the slag with different binary basicities (wt.% CaO/wt.% SiO2 = 3.0, 5.0, 7.0, 9.0 and 11....
Ariegilatite, BaCa12(SiO4)4(PO4)2F2O (R
of 5