Skip to Content

45 Results Found

  • Article
  • Open Access
1 Citations
1,927 Views
7 Pages

In this experimental study, the strip formed specimens made from aluminum alloy 1030, pure Cu, CuSn7, CuZn30 and low carbon steel 6114 were cold worked to different ratios. To be able to determine the microhardness values of the materials, the microh...

  • Article
  • Open Access
11 Citations
2,540 Views
11 Pages

Relationship between Biodegradation Rate and Grain Size Itself Excluding Other Structural Factors Caused by Alloying Additions and Deformation Processing for Pure Mg

  • Zhan Qu,
  • Lulin Liu,
  • Youming Deng,
  • Ran Tao and ,
  • Weidong Liu,
  • Zhongren Zheng and
  • Ming-Chun Zhao
  • + 2 authors+ 0 author

1 August 2022

This work studied the relationship between biodegradation rate and grain size itself, excluding other structural factors such as segregations, impure inclusions, second phase particles, sub-structures, internal stresses and textures caused by alloyin...

(This article belongs to the Special Issue Advances in Surface Modification on Microstructure and Properties of Metals)
  • Review
  • Open Access
97 Citations
14,009 Views
22 Pages

14 July 2011

The industrially-important WC-Co composite materials provide a useful, albeit complicated materials system for understanding the combined influences on hardness and strength properties of the constituent WC particle strengths, the particle sizes, the...

(This article belongs to the Special Issue Hard Materials: Advances in Synthesis and Understanding)
  • Review
  • Open Access
28 Citations
8,015 Views
12 Pages

31 December 2020

The Frank-Read model, as a way of generating dislocations in metals and alloys, is widely accepted. In the early 1960s, Li proposed an alternate mechanism. Namely, grain boundary sources for dislocations, with the aim of providing a different model f...

(This article belongs to the Special Issue Crystal Plasticity at Micro- and Nano-scale Dimensions)
  • Article
  • Open Access
2 Citations
2,413 Views
11 Pages

Mechanical Properties of the Ti49.8Ni50.2 Alloy after Multi-Axial Forging at 573 K

  • Aleksandr Lotkov,
  • Oleg Kashin,
  • Victor Grishkov,
  • Dorzhima Zhapova and ,
  • Konstantin Krukovskii,
  • Angelina Gusarenko,
  • Natalia Girsova,
  • Dmitrii Bobrov and
  • Olga Kashina
  • + 4 authors+ 0 author

18 June 2022

The mechanical properties of Ti49.8Ni50.2 (at %) alloy under tension at room temperature are studied in dependence on the true strain (e = 1.84–9.55) specified during isothermal multi-axial forging (abc-pressing). It was found that the stress a...

(This article belongs to the Special Issue Microstructure and Mechanical Behaviour of Shape Memory Alloys)
  • Article
  • Open Access
17 Citations
6,045 Views
12 Pages

18 October 2017

The mechanical strengths of nano-scale individual crystal or nanopolycrystalline metals, and other dimensionally-related materials are increased by an order of magnitude or more as compared to those values measured at conventional crystal or polycrys...

  • Article
  • Open Access
7 Citations
3,531 Views
12 Pages

Ice Composites Strengthened by Organic and Inorganic Nanoparticles

  • Yuri I. Golovin,
  • Alexander A. Samodurov,
  • Alexander I. Tyurin,
  • Vyacheslav V. Rodaev and ,
  • Dmitry Yu. Golovin,
  • Vladimir M. Vasyukov,
  • Svetlana S. Razlivalova and
  • Vyacheslav M. Buznik
  • + 3 authors+ 0 author

Extensive development of the Arctic, rich in various natural resources, requires a lot of cheap ecologically safe construction materials preferably using local renewable sources. Ice being easily available in regions with a cold climate meets all the...

(This article belongs to the Section Nanocomposites)
  • Editorial
  • Open Access
3 Citations
2,810 Views
6 Pages

25 August 2022

A brief history and update are given in four examples demonstrating that polycrystals are generally stronger than their individual component crystal grains because of obstructed dislocation pile-ups at grain boundaries. The example cases constitute d...

(This article belongs to the Special Issue Dislocation Mechanics of Crystal/Polycrystal Mechanical Strength Properties)
  • Review
  • Open Access
6 Citations
4,626 Views
19 Pages

18 March 2020

When metal is subjected to extreme strain rates, the conversation of energy to plastic power, the subsequent heat production and the growth of damages may lag behind the rate of loading. The imbalance alters deformation pathways and activates micro-d...

(This article belongs to the Special Issue Crystal Plasticity)
  • Article
  • Open Access
2,267 Views
14 Pages

25 May 2023

The phenomenon of the strain-rate sensitivity of metallic materials has been a topic of interest since the first mechanical tests at different strain rates were performed. The problem of its theoretical description appeared simultaneously. Despite th...

(This article belongs to the Special Issue Dislocation Mechanics of Crystal/Polycrystal Mechanical Strength Properties)
  • Article
  • Open Access
14 Citations
4,076 Views
12 Pages

A Study of the Quantitative Relationship between Yield Strength and Crystal Size Distribution of Beeswax Oleogels

  • Varuzhan Sarkisyan,
  • Roman Sobolev,
  • Yuliya Frolova,
  • Irina Vorobiova and
  • Alla Kochetkova

5 January 2022

Beeswax and beeswax hydrocarbon-based oleogels were studied to evaluate the quantitative relationship between their yield strength and crystal size distribution. With this aim, oleogels were prepared using four different cooling regimes to obtain dif...

  • Article
  • Open Access
10 Citations
4,286 Views
13 Pages

20 July 2019

In order to study the size effect on the mechanical property of micro-scale metal, pure copper strips with thicknesses in the range of 20 µm to 600 µm were obtained through the asynchronous foil rolling technology. Progressive mechanical...

  • Editorial
  • Open Access
8 Citations
5,367 Views
8 Pages

31 January 2019

Dislocation pile-up and thermal activation influences on the deformation and fracturing behaviors of polycrystalline metals are briefly reviewed, as examples of dislocation mechanics applications to understanding mechanical properties. To start, a re...

(This article belongs to the Special Issue Dislocation Mechanics of Metal Plasticity and Fracturing)
  • Article
  • Open Access
17 Citations
3,492 Views
11 Pages

17 April 2021

Friction stir processing (FSP), a severe plastic deformation process, was applied on pure Cu to obtain a stir zone with a very fine grain size. Yet, when FSP is used, the stir zone is as wide as the diameter of the shoulder at the upper surface of th...

(This article belongs to the Section Welding and Joining)
  • Article
  • Open Access
14 Citations
2,737 Views
12 Pages

Mechanical and Corrosion Behavior of a Composite Gradient-Structured Cu-Fe Alloy

  • Bo Guan,
  • Xiao Li,
  • Jing Xu,
  • Rui Fu and ,
  • Changjian Yan,
  • Jiawei Huang,
  • Qiang Hu,
  • Jin Zou,
  • Wenzheng Liu and
  • Zhi Hu
  • + 5 authors+ 0 author

21 July 2023

Immiscible Cu-Fe alloys exhibit poor corrosion resistance due to different corrosion potentials between the constituent phases, which limits their application. In this paper, a composite gradient-structured Cu-10 wt.%Fe plate was prepared via the ult...

  • Article
  • Open Access
8 Citations
2,900 Views
10 Pages

2 February 2020

Reactively synthesized porous Ti3SiC2 with different pore sizes was prepared using TiH2, Si and graphite powders as starting materials. The effect of pore size on the flexural stress–strain relationship, bending strength and flexural elastic mo...

(This article belongs to the Special Issue Intermetallic Compound)
  • Article
  • Open Access
24 Citations
4,121 Views
13 Pages

Hardening of Additive Manufactured 316L Stainless Steel by Using Bimodal Powder Containing Nanoscale Fraction

  • Aleksandr M. Filimonov,
  • Oleg A. Rogozin,
  • Denis G. Firsov,
  • Yulia O. Kuzminova and ,
  • Semen N. Sergeev,
  • Alexander P. Zhilyaev,
  • Marat I. Lerner,
  • Nikita E. Toropkov,
  • Alexey P. Simonov and
  • Stanislav A. Evlashin
  • + 8 authors+ 3 authors

29 December 2020

The particle size distribution significantly affects the material properties of the additively manufactured parts. In this work, the influence of bimodal powder containing nano- and micro-scale particles on microstructure and materials properties is...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Review
  • Open Access
68 Citations
14,758 Views
31 Pages

Nanocrystalline Materials: Synthesis, Characterization, Properties, and Applications

  • Amanendra K. Kushwaha,
  • Merbin John,
  • Manoranjan Misra and
  • Pradeep L. Menezes

29 October 2021

Nanostructuring is a commonly employed method of obtaining superior mechanical properties in metals and alloys. Compared to conventional polycrystalline counterparts, nanostructuring can provide remarkable improvements in yield strength, toughness, f...

(This article belongs to the Section Inorganic Crystalline Materials)
  • Article
  • Open Access
29 Citations
6,771 Views
15 Pages

Numerical Modelling of Microstructure Evolution in Friction Stir Welding (FSW)

  • Narges Dialami,
  • Miguel Cervera and
  • Michele Chiumenti

14 March 2018

This work studies the metallurgical and microstructural aspects of Friction Stir Welding (FSW) in terms of grain size and microhardness. The modelling is based on the combination of an apropos kinematic framework for the local simulation of FSW proce...

  • Feature Paper
  • Article
  • Open Access
8 Citations
4,572 Views
12 Pages

13 February 2021

Evolution of microstructure and hardness in quenched ultrahigh carbon steel Fe-0.85Mo-0.6Si-1.4C by warm compression on a Bähr plastometer-dilatometer at 775 °C and at 0.001 to 1 s−1 strain rate range is reported. The material was prepared via powder...

(This article belongs to the Special Issue Advances in Powder Metallurgy)
  • Article
  • Open Access
25 Citations
3,425 Views
14 Pages

Microstructure and Strengthening Model of Cu–Fe In-Situ Composites

  • Keming Liu,
  • Xiaochun Sheng,
  • Qingpeng Li,
  • Mengcheng Zhang and ,
  • Ningle Han,
  • Guangyu He,
  • Jin Zou,
  • Wei Chen and
  • Andrej Atrens
  • + 4 authors+ 0 author

6 August 2020

The tensile strength evolution and strengthening mechanism of Cu–Fe in-situ composites were investigated using both experiments and theoretical analysis. Experimentally, the tensile strength evolution of the in-situ composites with a cold defor...

  • Article
  • Open Access
7 Citations
2,887 Views
27 Pages

In-Situ Al-Mg Alloy Base Composite Reinforced by Oxides and Intermetallic Compounds Resulted from Decomposition of ZrW2O8 during Multipass Friction Stir Processing

  • Andrey Chumaevskii,
  • Anna Zykova,
  • Alexandr Sudarikov,
  • Evgeny Knyazhev and ,
  • Nickolai Savchenko,
  • Alexander Gubanov,
  • Evgeny Moskvichev,
  • Denis Gurianov,
  • Aleksandra Nikolaeva and
  • Sergei Tarasov
  • + 7 authors+ 2 authors

14 January 2023

In the presented work, the effect of friction stir processing admixing the zirconium tungstate ZrW2O8 powder on the microstructure, mechanical and tribological properties of the AA5056 Al-Mg alloy stir zone has been studied. The FSP resulted in obtai...

  • Article
  • Open Access
28 Citations
7,425 Views
20 Pages

21 June 2017

Crystal plasticity finite element models have been extensively used to simulate various aspects of polycrystalline deformations. A common weakness of practically all models lies in a relatively large number of constitutive modeling parameters that, i...

(This article belongs to the Special Issue Plasticity of Crystals and Interfaces)
  • Article
  • Open Access
14 Citations
2,477 Views
13 Pages

Effect of True Strains in Isothermal abc Pressing on Mechanical Properties of Ti49.8Ni50.2 Alloy

  • Oleg Kashin,
  • Konstantin Krukovskii,
  • Aleksandr Lotkov and
  • Victor Grishkov

30 September 2020

The paper analyzes the microstructure and mechanical properties of Ti49.8Ni50.2 alloy (at.%) under uniaxial tension at room temperature after isothermal abc pressing to true strains e = 0.29 − 8.44 at T = 723 K. The analysis shows that as the t...

(This article belongs to the Special Issue Microstructure and Mechanical Properties of Titanium Alloys)
  • Article
  • Open Access
34 Citations
6,581 Views
18 Pages

5 February 2019

By using nc-Ni coatings as a model system, systematic experiments were designed to evaluate the interaction between the microstructural and mechanical properties tailored by electrodeposition conditions. A direct correlation between grain size and te...

  • Review
  • Open Access
19 Citations
5,633 Views
29 Pages

Multiscale Mechanical Performance of Wood: From Nano- to Macro-Scale across Structure Hierarchy and Size Effects

  • Yuri I. Golovin,
  • Alexander A. Gusev,
  • Dmitry Yu. Golovin,
  • Sergey M. Matveev and
  • Inna A. Vasyukova

29 March 2022

This review describes methods and results of studying the mechanical properties of wood at all scales: from nano- to macro-scale. The connection between the mechanical properties of material and its structure at all these levels is explored. It is sh...

(This article belongs to the Special Issue Mechanics of Micro- and Nano-Size Materials and Structures)
  • Article
  • Open Access
2 Citations
2,055 Views
18 Pages

Plastic Behavior of Metals and Their Sensitivity to Grain Size: Comparison between Two Multiscale Approaches

  • Naser A. Alsaleh,
  • Akrum Abdul-Latif,
  • Fahamsyah H. Latief,
  • Mohamed M. Z. Ahmed and
  • Sabbah Ataya

6 October 2023

This study evaluates two multiscale models to determine their ability to describe the effect of grain size (GS) on the plastic behavior of ultrafine-grained (UFG) and nanocrystalline (NC) materials. One model follows the Hall–Petch type (Model-...

(This article belongs to the Special Issue Modern Technologies in the Manufacturing of Metal Matrix Composites)
  • Article
  • Open Access
22 Citations
4,594 Views
27 Pages

Effect of High-Energy Ball Milling Time on the Density and Mechanical Properties of W-7%Ni-3%Fe Alloy

  • Aleksey V. Nokhrin,
  • Nataliya V. Malekhonova,
  • Vladimir N. Chuvil’deev,
  • Nikolay V. Melekhin and ,
  • Anatoliy M. Bragov,
  • Andrey R. Filippov,
  • Maksim S. Boldin,
  • Eugeniy A. Lantsev and
  • Nikita V. Sakharov
  • + 4 authors+ 0 author

10 August 2023

The present work was aimed at the investigation of the effect of high-energy ball milling (HEBM) time on the sintering kinetics, structure, and properties of the heavy tungsten alloy (HTA) W-7%Ni-3%Fe. The HTA samples were obtained from nanopowders (...

  • Article
  • Open Access
12 Citations
4,078 Views
12 Pages

Prediction of the Work-Hardening Exponent for 3104 Aluminum Sheets with Different Grain Sizes

  • Ni Tian,
  • Fei Yuan,
  • Ceheng Duan,
  • Kun Liu and ,
  • Guangdong Wang,
  • Gang Zhao and
  • Liang Zuo
  • + 2 authors+ 0 author

25 July 2019

A practical approach to predict the yield strength and work-hardening exponent (n value) to evaluate the deep-drawing performance of annealed 3104 aluminum sheets is presented in the present work by only measuring and analyzing the grain size of the...

  • Article
  • Open Access
47 Citations
6,710 Views
11 Pages

Effect of Cooling Rate on Microstructure and Properties of Twin-Roll Casting 6061 Aluminum Alloy Sheet

  • Zhen Xu,
  • Sixue Wang,
  • Hongbin Wang,
  • Hua Song and ,
  • Shengli Li and
  • Xingyu Chen
  • + 1 author+ 0 author

30 August 2020

In this study, a twin-roll casting sheet of 6061 aluminum alloy was cooled using furnace, asbestos, air, wind and water. The effect of cooling rate on the microstructure and properties of twin-roll casting 6061 aluminum alloy sheet were studied. Opti...

  • Article
  • Open Access
5 Citations
4,589 Views
23 Pages

28 February 2023

The tribological behavior of dual-phase steels have been studied at the macroscopic scale taking the macrohardness as the main material property to control friction and wear. However, the contribution to the macroscopic behavior of the varying proper...

(This article belongs to the Special Issue Surface Modification for Improving the Performance of Engineering Components)
  • Article
  • Open Access
10 Citations
3,413 Views
11 Pages

Effects of Substrate Temperature on Nanomechanical Properties of Pulsed Laser Deposited Bi2Te3 Films

  • Hui-Ping Cheng,
  • Phuoc Huu Le,
  • Le Thi Cam Tuyen,
  • Sheng-Rui Jian and ,
  • Yu-Chen Chung,
  • I-Ju Teng,
  • Chih-Ming Lin and
  • Jenh-Yih Juang
  • + 3 authors+ 0 author

20 June 2022

The correlations among microstructure, surface morphology, hardness, and elastic modulus of Bi2Te3 thin films deposited on c-plane sapphire substrates by pulsed laser deposition are investigated. X-ray diffraction (XRD) and transmission electron micr...

(This article belongs to the Special Issue Recent Advances in the Growth and Characterizations of Thin Films)
  • Article
  • Open Access
20 Citations
8,319 Views
22 Pages

3 August 2017

In this article, we present a strategy to decouple the relative influences of colony, domain and lamella boundary strengthening in fully lamellar titanium aluminide alloys, using a physics-based crystal plasticity modeling strategy. While lamella and...

(This article belongs to the Special Issue Intermetallic Alloys: Fabrication, Properties and Applications 2017)
  • Article
  • Open Access
4 Citations
2,283 Views
19 Pages

9 September 2022

In this paper, we used molecular dynamics simulations to study the atomic mechanisms of phase transformations, plasticity features, and mechanical properties of two-phase Fe95Ni5 (at. %) samples with a gradient nanograined structure under uniaxial de...

(This article belongs to the Special Issue Thermomechanical Treatment of Metals and Alloys)
  • Article
  • Open Access
17 Citations
5,471 Views
11 Pages

13 April 2019

Selective laser melting (SLM) is an attractive technology for fabricating complex metal parts with reduced number of processing steps compared to traditional manufacturing technologies. The main challenge in its adoption is the variability in mechani...

(This article belongs to the Special Issue Design and Applications of Additive Manufacturing and 3D Printing)
  • Article
  • Open Access
10 Citations
3,392 Views
28 Pages

13 July 2021

The influence of bath hydrodynamics on the resultant micromechanical properties of electrodeposited nickel-cobalt alloy system is investigated. The bath hydrodynamics realized by magnetic stirring is simulated using COMSOL Multiphysics and a region o...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
1 Citations
1,563 Views
10 Pages

Effects of Grain Size on Mechanical Properties of Nanopolycrystalline Fe-Al Alloy

  • Xiaoming Liu,
  • Kun Gao,
  • Long Huang,
  • Peng Chen and
  • Jing Yang

4 August 2025

FeAl intermetallic compounds exhibit high application potential in high-voltage transmission lines to withstand external forces such as powerlines’ own gravity and wind force. The ordered crystal structure in FeAl intermetallic compounds endows...

(This article belongs to the Section Materials Processes)
  • Feature Paper
  • Article
  • Open Access
13 Citations
5,999 Views
37 Pages

Effect of σ-Phase on the Strength, Stress Relaxation Behavior, and Corrosion Resistance of an Ultrafine-Grained Austenitic Steel AISI 321

  • Vladimir I. Kopylov,
  • Aleksey V. Nokhrin,
  • Natalia A. Kozlova,
  • Mikhail K. Chegurov and ,
  • Mikhail Yu. Gryaznov,
  • Sergey V. Shotin,
  • Nikolay V. Melekhin,
  • Nataliya Yu. Tabachkova,
  • Ksenia E. Smetanina and
  • Vladimir N. Chuvil’deev
  • + 5 authors+ 0 author

24 December 2022

This paper reported the results of research into the effect of Equal Channel Angular Pressing (ECAP) temperature and 1-h annealing temperature on mechanical properties, stress-relaxation resistance, and corrosion resistance of austenitic steel AISI 3...

(This article belongs to the Special Issue Environmentally-Assisted Degradation of Metals and Alloys)
  • Article
  • Open Access
9 Citations
2,399 Views
16 Pages

The Role of Microstructural Length Scale in Hydrogen Generation Features of an Al-Sn-Fe Alloy

  • Andre Barros,
  • Camila Konno,
  • Andrei de Paula,
  • Cassio Silva and ,
  • Amauri Garcia and
  • Noé Cheung
  • + 1 author+ 0 author

2 February 2024

The reaction of water with Al-based alloys presents a promising alternative for on-board hydrogen production. This method, free from carbon emissions, has the advantage of addressing issues related to hydrogen storage and logistics. Al-Sn-Fe alloys a...

  • Article
  • Open Access
8 Citations
2,197 Views
12 Pages

Investigation of the Micromechanical Behavior of a Ti68Nb7Ta3Zr4Mo18 (at.%) High-Entropy Alloy

  • Jin Wang,
  • Qianli Ma,
  • Hepeng Cheng,
  • Hechun Yu and ,
  • Suxiang Zhang,
  • Huichao Shang,
  • Guoqing Zhang and
  • Wenbo Wang
  • + 3 authors+ 0 author

20 July 2023

Intense research efforts are focused on the development of advanced high-entropy alloys intended for premium aerospace components and other applications, where high strength and good formability are crucial. The mechanical properties of these alloys...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
2 Citations
3,245 Views
12 Pages

21 August 2021

It is planned that doped copper overpacks will be utilized in the spent nuclear fuel repositories in Finland and in Sweden. The assessment of long-term integrity of the material is a matter of importance. Grain structure variations, segregation and a...

(This article belongs to the Special Issue Micromechanical Modelling and Its Applications to Polycrystals)
  • Article
  • Open Access
26 Citations
7,924 Views
20 Pages

Influence of Grain Size on Mechanical Properties of a Refractory High Entropy Alloy under Uniaxial Tension

  • Orlando Deluigi,
  • Felipe Valencia,
  • Diego R. Tramontina,
  • Nicolás Amigo and ,
  • Javier Rojas-Nunez and
  • Eduardo M. Bringa
  • + 1 author+ 0 author

19 February 2023

There is a growing interest in High Entropy Alloys (HEAs) due to their outstanding mechanical properties. Most simulation studies have focused on face-centered cubic (fcc) HEAs; however, bcc HEAs can offer a larger elastic modulus and plastic yieldin...

(This article belongs to the Special Issue Dislocation Mechanics of Crystal/Polycrystal Mechanical Strength Properties)
  • Article
  • Open Access
1 Citations
2,433 Views
17 Pages

Efficient Crystal Plasticity Modeling of Lath Martensite Considering Block Boundary Effects

  • Sally Issa,
  • Håkan Hallberg,
  • Mathias Wallin and
  • Matti Ristinmaa

13 April 2025

An efficient extension of conventional rate-dependent crystal plasticity is formulated to include the influence of block boundaries in lath martensite. It is shown that this can be achieved by minor modifications to a conventional crystal plasticity...

(This article belongs to the Section Computation and Simulation on Metals)
  • Article
  • Open Access
4 Citations
3,879 Views
12 Pages

18 December 2018

In this study, the mechanism of {332}<113> twinning formation in cold-rolled Ti-35Nb-2Ta-3Zr-O (wt %) alloy was investigated based on the Taylor-Bishop-Hill theory. The experimental data of crystal orientation in the rolling bite zone was obtai...