2021 June - 106 articles
Poly (vinyl ethers) are compounds with great value in the coating industry due to exhibiting properties such as high viscosity, soft adhesiveness, resistance to saponification and solubility in water and organic solvents. However, the main challenge...
This work demonstrates the application of magnetic carbon-encapsulated iron nanoparticles (CEINs) for the construction of bioelectrodes in a biobattery and a biofuel cell. It has been shown that carbon-encapsulated iron nanoparticles are a suitable m...
The problems of catalyst deactivation and optimization of the mixed feedstock become more relevant when the residues are involved as a catalytic cracking feedstock. Through numerical and experimental studies of catalytic cracking, we optimized the co...
In this study, Mn-based catalysts supported by highly porous silica gel powder (SSA up to 470 m2·g−1 and total pore volume up to 0.8 cm3·g−1) were prepared by six different methods in liquid solutions (electroless metal deposition, stepwise addition...
Iridium(NHC)-catalyzed transfer hydrogenation (TH) of CO2 and inorganic carbonates with glycerol were conducted, demonstrating excellent turnover numbers (TONs) and turnover frequencies (TOFs) for the formation of formate and lactate. Regardless of c...
Cu-mordenite (Cu-MOR) catalysts with different copper loadings were prepared, characterized and examined in continuous, gas-flow synthesis of methyl acetate (MA) by dimethyl ether (DME) carbonylation. Improved activity and selectivity were observed f...
Fe-Ni and Co-Fe-Ni catalysts were prepared by the wet impregnation method for the production of high-calorific synthetic natural gas. The influence of Ni addition to Fe and Co-Fe catalyst structure and catalytic performance was investigated. The resu...
In search a hydrogen source, we synthesized TiO2-Cu-graphene composite photocatalyst for hydrogen evolution. The catalyst is a new and unique material as it consists of copper-decorated TiO2 particles covered tightly in graphene and obtained in a flu...
The catalytic effect of copper in Devarda’s Al-Cu-Zn alloy (Dev. alloy) and sole metallic copper, copper salts and copper oxides in the coaction of NaBH4 within the hydrodehalogenation (HDH) of polybrominated phenols, such as the herbicide Bromoxynil...
Cysteine is the main precursor of sulfur-containing biological molecules in bacteria and contributes to the control of the cell redox state. Hence, this amino acid plays an essential role in microbial survival and pathogenicity and the reductive sulf...
The role of the effect of the support on the reactivity of heterogeneous catalysts cannot be over-emphasized. Therefore, the study documented in this article investigated the effect of different metal oxide supports (MgO, CaO and TiO2) and mixed oxid...
Hydrogen sulfide is frequently met in natural waters, like mineral springs, but mostly it is found in marine water with low renewal rate. The Black Sea has extremely high hydrogen sulfide content. It can be utilized in different ways, but the most pr...
With the rapid increase in energy consumption worldwide, the development of renewable and alternative energy sources can sustain long-term development in the energy field. Hydrogen (H2), which is one of the clean chemical fuels, has the highest weigh...
Catalytic hydrogenation of CO2 has great potential to significantly reduce CO2 and contribute to green economy by converting CO2 into a variety of useful products. The goal of this study is to assess and compare the techno-economic and environmental...
Steel filter discs were catalytically activated by ALD, using a coating of supporting Al2O3 layer and an active NiO layer for gas cleaning. Prepared discs were tested for model biomass gasification and gas catalytic filtration to reduce or eliminate...
The production of hydrogen via the water splitting process is one of the most promising technologies for future clean energy requirements, and one of the best related challenges is the choice of the most highly efficient and cost effective electrocat...
Titanium dioxide (TiO2) is a commonly used wide bandgap semiconductor material for energy and environmental applications. Although it is a promising candidate for photovoltaic and photocatalytic applications, its overall performance is still limited...
Catalytic membrane reactors have been widely used in different production industries around the world. Applying a catalytic membrane reactor (CMR) reduces waste generation from a cleaner process perspective and reduces energy consumption in line with...
Porous BiVO4 electrodes were conformally decorated with CdS via a chemical bath deposition process. The highest photocurrent at 1.1 V vs. RHE was achieved for a BiVO4/CdS composite (4.54 mA cm−2), compared with CdS (1.19 mA cm−2) and bare BiVO4 (2.1...
The reliable and efficient counting of active sites in catalytic olefin polymerization has been realized by using acyl chloride as the quench-labeling agent. However, the molar ratio of acyl chloride to the alkylaluminum cocatalyst must be larger tha...
Nickel(II) complexes have been synthesized and characterized using nuclear magnetic resonance (NMR), infrared spectroscopy, high resolution mass spectroscopy, and elemental analysis. The complexes were evaluated as pre-catalysts in the direct hydroge...
Zeolites play a central role in many industrial and chemical engineering processes involving solid catalysts, which have attracted a great deal of attention from chemists, chemical engineers, and materials scientists due to their fascinating features...
This study presents findings on the chemical synthesis of activated carbon from Saudi dates and its structural, chemical, and catalytic properties. Dates are among the top biowaste materials in the Kingdom of Saudi Arabia, and efforts are underway to...
Metal–organic frameworks (MOFs) are promising materials for the removal and photodegradation of pesticides in water. Characteristics such as large surface area, crystalline structure and catalytic properties give MOFs an advantage over other traditio...
Saccharification of lignocellulosic biomass is a fundamental step in the biorefinery of second generation feedstock. The physicochemical and enzymatic processes for the depolymerization of biomass into simple sugars has been achieved through numerous...
Solution-processed iron selenide nanocrystals (NCs) have recently attracted considerable attention in electrocatalysis water splitting. Nevertheless, a primary challenge in current iron-based NCs chemical synthesis is controlling phase purities betwe...
In this work, the composition, structural and morphological features, and particle size of the active phase of the catalyst (MoS2), synthesized in-situ during the heavy oil hydroconversion performed in continuous flow reactor on lab-scale pilot flow...
Laccase is increasingly adopted in diverse industrial and environmental applications, due to its readily accessible requirements for efficient catalytic synthesis and biotransformation of chemicals. However, it is perceived that its industrial produc...
In this contribution, the photoactivity upon activation by simulated sunlight of zinc oxide (ZnO) obtained from two different synthetic pathways (Acetate and Nitrate) is investigated for water purification. Different reagents and processes were explo...
In the present study, we report the synthesis and catalytic activity of tungsten- and molybdenum-promoted mesoporous metal oxides in the aminolysis of epoxides. The as-synthesized catalysts were fully characterized by a variety of techniques such as...
This review summarizes the most noteworthy achievements in the field of C–O and C–N bond formation by hydroalkoxylation and hydroamination reactions on unactivated alkenes (including 1,2- and 1,3-dienes) promoted by earth-abundant 3d transition metal...
NOx is a pervasive pollutant in urban environments. This review assesses the current state of the art of photocatalytic oxidation materials, designed for the abatement of nitrogen oxides (NOx) in the urban environment, and typically, but not exclusiv...
Atomic layer deposition (ALD) was used to prepare a thin alumina layer on Fischer–Tropsch catalysts. Co-Pt-Si/γ-Al2O3 catalyst was overcoated with 15–40 cycles of Al2O3 deposited from trimethylaluminum (TMA) and water vapor, followed by thermal annea...
This volume is focused on materials and processes for the electro- and photoelectrochemical removal of biorefractory pollutants and emerging contaminants from waters to show the importance of electrochemistry and photoelectrochemistry in offering sol...
As generally known, nitrogen oxides NOx (NO, NO2) and nitrous oxide (N2O) are significant pollutants [...]
Human endeavors generate a significant quantity of bio-waste, even lignocellulosic waste, due to rapid industrialization and urbanization, and can cause pollution to aquatic ecosystems, and contribute to detrimental animal and human health because of...
In this work, platinum group metal (PGM) free-based cathode active layers were prepared using different printing techniques. The membrane electrode assemblies (MEAs) integrate a PGM free catalyst based on Fe, N and C atoms at the cathode side. Scanni...
In methane combustion, water tolerance of Pd-based catalysts is quite critical for stable performance, because water is produced in situ and a water-containing feed is used under real conditions. Herein, water-tolerant mesoporous silica-alumina (H-MS...
A series of chiral complexes of the form Ir(NHC)2(aa)(H)(X) (NHC = N-heterocyclic carbene, aa = chelated amino acid, X = halide) was synthesized by oxidative addition of α-amino acids to iridium(I) bis-NHC compounds and screened for asymmetric transf...
In order to degrade toxic pollutants such as dyes during the process of sewage treatment, considerable attention has been paid to photocatalytic technologies. In this paper, TiO2/Ag[BMIM]Cl (1-butyl-3-methyl imidazolium chloride ([BMIM]Cl)) nanocompo...
The photocatalytic performance of metal-free graphitic carbon nitride (g-C3N4) was examined using visible light-emitting diodes (LEDs). A comparative and parametric study was conducted using the photocatalytic degradation of phenol as a model reactio...
In this work, the transesterification of methyl estolides (ME) extracted from the lipid component present in the sewage scum was investigated. Methyl 10-(R)-hydroxystearate (Me-10-HSA) and Fatty Acid Methyl Esters (FAMEs) were obtained in a single st...
In this study, novel and cost-effective alkali-activated materials (AAMs) for catalytic applications were developed by using an industrial side stream, i.e., blast furnace slag (BFS). AAMs can be prepared from aluminosilicate precursors under mild co...
Cytochrome P450 (CYP) mediated enzymatic hydroxylation of fatty acids present a green alternative to chemical synthesis of hydroxy fatty acids (HFAs), which are high-value oleochemicals with various uses in materials industry and medical field. Altho...
Cu-based catalysts are promising for CO oxidation applications with catalyst deactivation being a major barrier. We start with a CuO/Al2O3 catalyst and find that while the CO conversion decreases, CO2 accumulates and the average Cu chemical state sta...
The use of Reactive Deep Eutectic Solvents (RDESs) in the preparation of polar head modified phospholipids (PLs) with phospholipase D (PLD)-catalyzed biotransformations has been investigated. Natural phosphatidylcholine (PC) has been submitted to PLD...
Na2[Ir(cod)(emim)(mtppts)] (1) with high catalytic activity in various organic- and aqueous-phase hydrogenation reactions was immobilized on several types of commercially available ion-exchange supports. The resulting heterogeneous catalyst was inves...
On account of the continuous decrease in oil reserves, as well as the promotion of sustainable policies, there is an increasing interest in biomass conversion processes, which imply the search for new raw materials as energy sources, like forestry an...
This work established an integrated utilization of dairy whey in β-galactosidase production from Lactobacillus bulgaricus and prebiotics synthesis by the probiotic enzyme. A cost-effective whey-based medium was newly developed for culturing Lactobaci...
The rational design of cost effective and highly efficient oxygen evolution reaction (OER) catalysts plays an extremely important role in promoting the commercial applications of electrochemical water splitting. Herein we reported a sacrificial templ...
of 3
