59 Results Found

The structure–property relationship of catalytic supports for the deposition of redox-active transition metals is of great importance for improving the catalytic efficiency and reusability of the catalysts. In this work, the role of alumina support p...

Cu (10 wt%) materials on silica nanotubes were prepared via two different synthetic approaches, co-synthesis and wetness impregnation on preformed SiO2 nanotubes, both as dried or calcined materials, with Cu(NO3)2.5H2O as a material precursor. The ob...

In this work, the activity of bimetallic Pd-Au doped hierarchically structured titania catalysts has been investigated in the total oxidation of toluene. In earlier works, doping titania with group Vb metal oxides ensured an increased catalytic perfo...

X6Al2HT500 hydrotalcites, where X represents Mg, Fe, Cu or Zn were synthetized and investigated before and after gold deposition for toluene and CO total oxidation reactions. The samples have been characterized by specific areas, XRD measurements and...

Co3O4 catalysts were prepared via carbonate precipitation and subsequent calcination under specific conditions. The different catalysts were characterized as received using several techniques and tested in the total oxidation of toluene or propane. C...

Metal-doped (Mn, Cu, Ni, and Fe) cobalt oxides were prepared by a coprecipitation method and were used as catalysts for the total oxidation of toluene and propane. The metal-doped catalysts displayed the same cubic spinel Co3O4 structure as the pure...

A series of Co3O4 catalysts were synthesized by an ammonia precipitation method at various precipitating pH values (8.0, 8.5, 9.0, 9.5, and 10.0) and with different numbers of washings. Their performance in the total oxidation of two selected hydroca...

Co6Al2HT hydrotalcite-like compounds were synthesized by three different methods: co-precipitation, microwaves-assisted and ultrasound-assisted methods. The mixed oxides obtained after calcination were studied by several techniques: XRD, TEM, H2-TPR...

CuAlCe oxides were obtained from hydrotalcite-type precursors by coprecipitation using a M2+/M3+ ratio of 3. The collapse of the layered double hydroxide structure following the thermal treatment leads to the formation of mixed oxides (CuO and CeO2)....

LaBO3 (B: Mn, Fe) perovskites were synthesized using a three-step reactive grinding process followed by a calcination at 400 °C for 3 h. The three successive steps are: (i) solid state synthesis (SSR); (ii) high-energy ball milling (HEBM); (iii)...

This review provides an overview of our present state of knowledge using manganese oxide (MnOx)-based catalysts for toluene abatement in PPC (Post plasma-catalysis) configuration. The context of this study is concisely sum-up. After briefly screening...

Diatomite (DE) has attracted considerable attention owing to its abundance, low cost, and potential for a wide variety of applications. This work reports the development of mesoporous wool-ball-like (WBL) microspheres from natural DE through a simple...

LaMnO3 (LM) catalysts with a molar ratio of citric acid (CA) to metal (La3+ + Mn2+) nitrates ranging from 0.5 to 2 (LM0.5 to LM2) were synthesized by the citrate sol–gel method with the aim of studying the effect of the citric acid ratio on the...

Composites of Laponite and Cu–Mn hopcalite-related mixed oxides, prepared from hydrotalcite-like (Htlc) precursors obtained in inverse microemulsions, were synthesized and characterized with XRF, XRD, SEM, TEM, H2 temperature-programmed reducti...

The paper discusses a formation of Mt–PAA composite containing a natural montmorillonite structure partially exfoliated by poly(acrylic acid) introduced through intercalation polymerization of acrylic acid. Mt–PAA was subsequently modified by control...

The proposed study is devoted to highlighting the importance of mixed oxides preparation through the layered double hydroxide route for undesirable gas pollutants abatement. Different series of Cu/Al/Ce mixed oxides with similar or different stoichio...

Transition metals as catalysts for total VOC oxidation at low temperatures (150–280 °C) are a big challenge nowadays. Therefore, iron-modified SBA-15, AlSBA-15, and ZrSBA-15 materials with 0.5 to 5.0 wt.% Fe loading were prepared and tested...

Co3O4, MgCo2O4 and MgO materials have been synthesized using a simple co-precipitation approach and systematically characterized. The total conversion of toluene to CO2 and H2O over spinel MgCo2O4 with wormlike morphology has been investigated. Compa...

In the context of coupling nonthermal plasmas with catalytic materials, CeO2 is used as adsorbent for toluene and combined with plasma for toluene oxidation. Two configurations are addressed for the regeneration of toluene saturated CeO2: (i) in plas...

Toluene is a major air pollutant emitted from painting and metal coating processes and might have some health effects. Adsorption and catalytic complete oxidation are promising ways to retain or convert toluene into harmless products. The present wor...

Due to their major role in atmospheric chemistry and secondary pollutant formation such as ozone or secondary organic aerosols, an accurate representation of OH and HO2 (HOX) radicals in air quality models is essential. Air quality models use simplif...

To better understand precursors of dicarboxylic acids in ambient secondary organic aerosol (SOA), we studied C4–C9 dicarboxylic acids present in SOA formed from the oxidation of toluene, naphthalene, α-pinene, and isoprene. C4–C9 di...

Designing highly active catalysts for the oxidation of volatile organic compounds (VOCs) involves fine-tuning the catalytic surface and improving its interaction with VOCs. The present review assesses various studies conducted in the last decade on C...

This study deals with the behavior of molybdenum–vanadium (Mo/V) mixed oxides catalysts in both disproportionation and selective oxidation of toluene. Samples containing different Mo/V ratios were prepared by a modified method using tetradecylt...

In this paper, we explore the computational capabilities of advanced modeling tools to reveal the factors that shape the observed benzene levels and behavior under different environmental conditions. The research was based on two-year hourly data con...

Aromatic volatile organic compounds (VOCs) are toxic to public health and contribute to global air pollution; thus, it is urgent to control VOC emissions. Catalytic oxidation technology has been widely investigated to eliminate aromatic VOCs; this te...

The thermocatalytic, photocatalytic and photothermo-catalytic oxidation of some volatile organic compounds (VOCs), 2-propanol, ethanol and toluene, was investigated over brookite TiO2-CeO2 composites. The multi-catalytic approach based on the synergi...

Solar photothermo-catalysis is a fascinating multi-catalytic approach for volatile organic compounds (VOCs) removal. In this work, we have explored the performance and the chemico-physical features of non-critical, noble, metal-free MnOx-ZrO2 mixed o...

Catalytic total oxidation is an effective technique for the treatment of industrial VOCs principally resulting from industrial processes using solvents, and usually containing mono-aromatics (BTEX) and oxygenated compounds (acetone, ethanol, butanone...

Red mud waste from the aluminium industry was modified by leaching using hydrochloric acid or oxalic acid with additives, followed by precipitation or evaporation. The prepared catalysts were characterized in detail and tested for toluene total oxida...

This study demonstrates rapid photocatalytic oxidation of a benzene, toluene, ethylbenzene, and xylene (BTEX) mixture over TiO2/volcanic glass. The assessment of the photocatalytic oxidation of BTEX was conducted under conditions simulating those fou...

This paper presents the combustion and emissions characteristics including volatile organic compound (VOC) of a common rail direct injection diesel engine fueled with palm oil biodiesel blends contained 0%, 10%, 30%, and 100% (by volume) biodiesel at...

Iron oxides (FeOx) are non-toxic, non-expensive and environmentally friendly compounds, which makes them good candidates for many industrial applications, among them catalysis. In the present article five catalysts based on FeOx were synthesized by m...

Railyards are important transportation hubs, and they are often situated near populated areas with high co-located density of manufacturing, freight movement and commercial enterprises. Emissions occurring within railyards can affect nearby air quali...

Co-Mn-Mg-Al oxides were synthesized using auto-combustion and co-precipitation techniques. Constant ratios were maintained with (Co + Mn + Mg)/Al equal to 3.0, (Co + Mn)/Mg equal to 1.0 and Co/Mn equal to 0.5. The chemical and structural composition...

A set of titania–silica mixed oxide materials were prepared by a cosolvent-induced gelation method using ethanol and toluene as solvent and cosolvent, respectively. These materials were extensively characterized by utilizing several characteriz...

Supported bimetallic nanoparticles (SBN) are extensively used as efficient redox catalysts. This kind of catalysis particularly using SBN has attracted immense research interest compared to their parent metals due to their unique physico-chemical pro...

In the present study, the efficacy of litchi fruit pericarp (LFP) extract (0.5%, 1.0% and 1.5% concentration) in retarding lipid oxidation of cooked sheep meat nuggets was evaluated and compared to butylated hydroxyl toluene (BHT, 100 ppm). The total...

We examined the formation of self-seeded platelet-like crystals from polystyrene-block-polyethylene oxide (PS-b-PEO) diblock copolymers in toluene as a function of polymer concentration (c), crystallization temperature (TC), and self-seeding temperat...

This study aimed to investigate the effect of processing methods on inhibiting lipid oxidation of deep fried crickets (Gryllus bimaculatus) during storage. Four antioxidants and two packaging methods were used. The effects of different antioxidants a...

We assessed the polyphenolic contents and antioxidant potential of the aqueous, ethanol and methanol stem bark extracts of Jatropha curcas. The total phenol, flavonoids, flavonols and proanthocyanidin contents of the extracts were evaluated to determ...

We evaluated the in vivo effects of melatonin treatment on oxidative damage in the liver in an experimental model of ischemia–reperfusion. A total of 37 male Sprague-Dawley rats were randomly divided into four groups: control, ischemia, ischemi...

This study highlighted the role of an 80% ethanolic Mon-Pu (Glochidion wallichianum) leaf extract (MPE), a novel natural antioxidative ingredient, in controlling the oxidative stability and physicochemical properties of a cooked sausage model system...

Increased levels and detrimental effects of volatile organic compounds (VOCs) stimulate research efforts to develop catalysts with high efficiency in complete hydrocarbon oxidation. This work is focused on the complete oxidation of benzene as a probe...

Hollow cathode plasma sputtering is an advantageous method of preparing catalysts in the form of thin oxide films on supports. Such catalysts are particularly suitable for processes such as catalytic total oxidation of volatile organic compounds (VOC...

Understanding how redox-active ligands coordinate to metal centers of different oxidation states is essential for applications ranging from metal remediation and recycling to drug discovery. In this study, coordination complexes of nickel(II), copper...

Structured catalytic membranes with high porosity and a low pressure drop are particularly suitable for industrial processes carried out at high space velocities. One of these processes is the catalytic total oxidation of volatile organic compounds,...

Enzymatic hydrolysate of African yam bean seed protein isolate was prepared by treatment with alcalase. The hydrolysate was further fractionated into peptide sizes of < 1, 1–3, 3–5 and 5–10 kDa using membrane ultrafiltration. The protein hydrolysate...

This research investigates how blending ethanol with gasoline influences both gaseous and particulate emissions, as well as the toxicological characteristics of particulates emitted from a plug-in hybrid electric vehicle adapted to run on fuel mixtur...

The oxidation of p-chlorobenzoic acid (p-CBA), used as a typical-model refractory organic compound, in aqueous solutions during the heterogeneous catalytic ozonation treatment process by applying the hydrophilic tetravalent manganese feroxyhyte (TMFx...