Skip to Content

173 Results Found

  • Feature Paper
  • Article
  • Open Access
10 Citations
4,528 Views
14 Pages

Effects of Process Parameters on Microstructure and Mechanical Properties of Semi-Solid Al-7Si-0.5Mg Aluminum Alloy by Gas Induced Semi-Solid Process

  • Guochao Gu,
  • Lixin Xiang,
  • Ruifen Li,
  • Wenhua Xu and ,
  • Yupeng Lu and
  • Raphaël Pesci
  • + 1 author+ 0 author

25 September 2022

Al-7Si-0.5Mg aluminum alloy semi-solid slurry with good spherical grains was prepared by gas induced semi-solid process (GISS) and the effects of both holding time and medium alloy addition on the microstructure of the semi-solid slurry were investig...

(This article belongs to the Special Issue Advances in Semi-solid Forming)
  • Review
  • Open Access
121 Citations
17,369 Views
17 Pages

13 March 2018

Semi-solid processing of aluminum alloys is a well-known manufacturing technique able to combine high production rates with parts quality, resulting in high performance and reasonable component costs. The advantages offered by semi-solid processing a...

(This article belongs to the Special Issue Semi-Solid Processing of Alloys and Composites)
  • Article
  • Open Access
13 Citations
3,464 Views
12 Pages

21 April 2022

In order to solve the problem of insufficient convective heat transfer of uniaxial stirred melt, the temperature field and shear rate of melt under planetary stirring were studied based on CFD simulation. The microstructure and properties of this tec...

(This article belongs to the Section Metals and Alloys)
  • Review
  • Open Access
46 Citations
10,978 Views
34 Pages

27 July 2022

Semi-solid metal (SSM) processing has been an attractive method for manufacturing near-net-shape components with high integrity due to its distinct advantages over conventional forming technologies. SSM processing employs a mixture of solid phase and...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
14 Citations
3,977 Views
12 Pages

Ultrasonic-Assisted Semi-Solid Forming Method and Microstructure Evolution of Aluminum/Copper Brazed Joints

  • Yin Liang,
  • Jiruan Pan,
  • Hua Zhang,
  • Peng Huang and ,
  • Jun Wang,
  • Yuxin Shi and
  • Limin Chen
  • + 2 authors+ 0 author

6 February 2020

Aluminum/Copper dissimilar metal connection devices have been widely used in equipment manufacturing. Ultrasonic vibration assisted semi-solid brazing technology is beneficial to improve brazing quality by using the good flow ability and strong defor...

(This article belongs to the Special Issue Characterization of Welded Joints)
  • Article
  • Open Access
6 Citations
3,011 Views
15 Pages

The Effect of CRITSIMA Process Parameters on the Microstructure Evolution and Element Segregation of Semi-Solid CuSn10P1 Alloy Billet

  • Xiongchao Zhang,
  • Lei Chen,
  • Han Xiao,
  • Yuhang Zhou and ,
  • Hao Chen and
  • Zhike Duan
  • + 1 author+ 0 author

14 March 2022

In this paper, based on the as-cast CuSn10P1 alloy. Semi-solid CuSn10P1 alloy billet was prepared by cold-rolled isothermal treatment strain-induced melting activation (CRITSIMA). The effects of cold-rolling reduction, isothermal temperature, and iso...

(This article belongs to the Special Issue Advances in Semi-solid Forming)
  • Article
  • Open Access
25 Citations
6,412 Views
11 Pages

17 April 2018

Semi-solid ZCuSn10P1 alloy slurry was fabricated by a novel enclosed cooling slope channel (ECSC). The influence of pouring length of ECSC on the microstructures of ZCuSn10P1 alloy semi-solid slurry was studied with an optical microscope an optical m...

(This article belongs to the Special Issue Semi-Solid Processing of Alloys and Composites)
  • Article
  • Open Access
15 Citations
3,517 Views
15 Pages

Microstructure and Properties of Semi-Solid 7075 Aluminum Alloy Processed with an Enclosed Cooling Slope Channel

  • Zhaoqiang Li,
  • Yongkun Li,
  • Rongfeng Zhou,
  • Lingzhi Xie and ,
  • Qiansi Wang,
  • Lingzhi Zhang,
  • Qiang Ji and
  • Bin Xu
  • + 3 authors+ 0 author

14 July 2023

In this study, an enclosed cooling slope channel (ECSC) was used to produce a semi-solid slurry of the 7075 aluminum alloy. The effects of the pouring temperature and the rate of cooling water on the microstructure of the semi-solid slurry were studi...

(This article belongs to the Section Materials for Energy Applications)
  • Article
  • Open Access
11 Citations
3,756 Views
14 Pages

2 May 2020

In situ Mg2Si–Al composites were prepared by using gravity casting and semi-solid extrusion. After P modification, the primary Mg2Si transformed to polygonal blocks. Extraction tests showed that the Mg2Si crystals had octahedral and tetrakaidek...

(This article belongs to the Special Issue Aluminum Alloys and Aluminum Matrix Composites)
  • Article
  • Open Access
9 Citations
3,956 Views
10 Pages

7 September 2021

This study reports the microstructural changes and mechanical properties of high-strength aluminum alloy chips prepared in the semi-solid state at different temperatures, pressures, and holding times. In semi-solid processes, these processing paramet...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
5 Citations
3,302 Views
12 Pages

Effects of Isothermal Temperature and Soaking Time on Water Quenched Microstructure of Nickel-Based Superalloy GH3536 Semi-Solid Billets

  • Guanfei Xiao,
  • Jufu Jiang,
  • Ying Wang,
  • Yingze Liu and ,
  • Ying Zhang and
  • Yinfeng Tian
  • + 1 author+ 0 author

19 August 2021

Semi-solid billets of GH3536 alloy were prepared by semi-solid isothermal treatment of wrought superalloy method. GH3536 samples were soaked at several semi-solid temperatures (1350 °C, 1360 °C, 1364 °C, and 1367 °C) for 5–120 min. The effects of tem...

(This article belongs to the Special Issue Commemorating the Launch of the Section 'Metals and Alloys')
  • Article
  • Open Access
1 Citations
1,122 Views
22 Pages

Effect of Aging Time on the Microstructure and Mechanical Properties of Gravity-Cast and Semi-Solid Extruded Mg2Si-Al Composites

  • Dekun Zhou,
  • Xiaobo Liu,
  • Shimin Zhang,
  • Haifei Cao and ,
  • Miao Yang,
  • Peiyu Zang and
  • Zhaoyu Chen
  • + 2 authors+ 0 author

3 April 2026

Gravity casting and semi-solid extrusion were employed to prepare Mg2Si-Al composites. X-ray diffraction (XRD), optical microscopy (OM), scanning electron microscopy (SEM), EDS analysis, Vickers hardness testing, and tensile testing were used to comp...

(This article belongs to the Special Issue Advances in Lightweight Metallic Materials: Processes, Structures, and Manufacturing)
  • Article
  • Open Access
15 Citations
5,818 Views
14 Pages

6 October 2017

Semi-solid feedstock of AZ80 magnesium alloy modified by trace rare-earth Y element (0, 0.2, 0.4, 0.8 wt. %) was fabricated by strain-induced melting activation (SIMA) in the form of extrusion and partial remelting. The effect of Y addition on the mi...

(This article belongs to the Special Issue Latest Developments in Magnesium Technology—Alloying, Processing, Microstructure, Deformation Mechanism and Mechanical Properties)
  • Article
  • Open Access
16 Citations
3,319 Views
17 Pages

Microstructure Comparison for AlSn20Cu Antifriction Alloys Prepared by Semi-Continuous Casting, Semi-Solid Die Casting, and Spray Forming

  • Shuhui Huang,
  • Baohong Zhu,
  • Yongan Zhang,
  • Hongwei Liu and ,
  • Shuaishuai Wu and
  • Haofeng Xie
  • + 1 author+ 0 author

20 September 2022

Antifriction alloys such as AlSn20Cu are key material options for sliding bearings used in machinery. Uniform distribution and a near-equiaxed granularity tin phase are generally considered to be ideal characteristics of an AlSn20Cu antifriction allo...

(This article belongs to the Special Issue Casting and Forming of Light Alloys)
  • Article
  • Open Access
14 Citations
2,912 Views
13 Pages

Microstructure Evolution and Solidification Behavior of a Novel Semi-Solid Alloy Slurry Prepared by Vibrating Contraction Inclined Plate

  • Yan Liu,
  • Minqiang Gao,
  • Ying Fu,
  • Weirong Li and ,
  • Pan Yang and
  • Renguo Guan
  • + 1 author+ 0 author

10 November 2021

In this work, based on the A356 alloy, a novel Al–Si–Mg–Cu–Fe–Sr alloy with good mechanical property and high thermal conductivity was developed. The semi-solid slurry of the alloy was prepared via the vibrating contraction inclined plate. The micros...

(This article belongs to the Special Issue Advances in Semi-solid Forming)
  • Article
  • Open Access
45 Citations
10,741 Views
18 Pages

23 September 2018

The effect of the T6 heat treatment on the microstructure and hardness of a secondary semi-solid AlSi9Cu3(Fe) alloy have been investigated by using optical, scanning and transmission electron microscopy and hardness testing. The semi-solid alloy was...

(This article belongs to the Special Issue Heat Treatment of Aluminum Alloys)
  • Article
  • Open Access
1,567 Views
13 Pages

Effect of Ultrasonic Power on the Microstructure and Properties of a Semi-Solid Slurry of SnSbCu11-6 Alloy

  • Lei Wang,
  • Xiaobin Luo,
  • Yuanwei Jia,
  • Yongkun Li and ,
  • Rongfeng Zhou,
  • Hao Zhang,
  • Dingdong Huo and
  • Yao Li
  • + 3 authors+ 0 author

27 December 2024

In this paper, the ultrasonic vibration treatment (UVT) technique was used to prepare a SnSbCu11-6 alloy semi-solid slurry, and the effects of ultrasonic power on its microstructure size, distribution and properties were studied. The results show tha...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
10 Citations
2,480 Views
21 Pages

6 February 2025

This study prepared Al/steel composite plates with high shear strength using semi-solid cast-rolling (SSCR). The results indicate that the semi-solid diffusion effectively reduced the diffusion and reaction rate between Al and steel, thereby impeding...

  • Article
  • Open Access
13 Citations
4,337 Views
12 Pages

The Influence of Holding Time on the Microstructure Evolution of Mg–10Zn–6.8Gd–4Y Alloy during Semi-Solid Isothermal Heat Treatment

  • Shuang Nie,
  • Bingyang Gao,
  • Xuejian Wang,
  • Zhiqiang Cao and ,
  • Enyu Guo and
  • Tongmin Wang
  • + 1 author+ 0 author

8 April 2019

A semi-solid microstructure of Mg–10Zn–6.8Gd–4Y alloys is acquired via an isothermal heat treatment process, and the effects of the holding time on the microstructure evolution of Mg–10Zn–6.8Gd–4Y alloys are invest...

(This article belongs to the Special Issue Effect of Rare Earth Additions on the Microstructure, Mechanical Properties and Corrosion of Magnesium Alloys)
  • Article
  • Open Access
12 Citations
3,476 Views
20 Pages

3 January 2021

Al-Mg-Si based alloys are popular alloys used in the automotive industry. However, limited studies have been performed to investigate the microstructure, deformation characteristics, and deformation mechanism for the semi-solid 6063 alloys. In this s...

(This article belongs to the Special Issue Hot Deformation and Microstructure Evolution of Metallic Materials)
  • Article
  • Open Access
5 Citations
2,475 Views
14 Pages

Study on the Semi-Solid Thixotropic Forging Forming Process for the Low-Carbon Steel Claw Pole

  • Shuangjiang Li,
  • Yongfei Wang,
  • Zeyuan Li,
  • Xiaoming Liu and
  • Shengdun Zhao

3 July 2023

Low-carbon steel has been popularly applied in numerous applications because of its unique features, such as good plasticity, high strength, great hardness, and excellent toughness. Additionally, the semi-solid thixotropic forging forming method has...

(This article belongs to the Special Issue Semisolid Processing and Squeeze Casting of Alloys and Composites)
  • Article
  • Open Access
1 Citations
3,626 Views
17 Pages

Semi-Solid Forging Process of Aluminum Alloy Connecting Rods for the Hydrogen Internal Combustion Engine

  • Yongfei Wang,
  • Hong Jiang,
  • Mengjiao Zhang,
  • Chaoqun Zhang and ,
  • Shengdun Zhao,
  • Ding Ding and
  • Yi Guo
  • + 2 authors+ 0 author

16 June 2024

As an important piece of equipment for hydrogen energy application, the hydrogen internal combustion engine is helpful for the realization of zero carbon emissions, where the aluminum connecting rod is one of the key core components. A semi-solid for...

(This article belongs to the Special Issue Numerical Modeling and Mechanical Properties Analysis for Metallic and Composite Materials and Structures)
  • Article
  • Open Access
13 Citations
6,825 Views
12 Pages

Tailorable Burning Behavior of Ti14 Alloy by Controlling Semi-Solid Forging Temperature

  • Yongnan Chen,
  • Wenqing Yang,
  • Haifei Zhan,
  • Fengying Zhang and ,
  • Yazhou Huo,
  • Yongqing Zhao,
  • Xuding Song and
  • Yuantong Gu
  • + 3 authors+ 0 author

16 August 2016

Semi-solid processing (SSP) is a popular near-net-shape forming technology for metals, while its application is still limited in titanium alloy mainly due to its low formability. Recent works showed that SSP could effectively enhance the formability...

(This article belongs to the Special Issue Physical Metallurgy of High Performance Alloys)
  • Review
  • Open Access
69 Citations
8,614 Views
23 Pages

Current Progress in Rheoforming of Wrought Aluminum Alloys: A Review

  • Gan Li,
  • Hongxing Lu,
  • Xiaogang Hu,
  • Feng Lin and ,
  • Xinwei Li and
  • Qiang Zhu
  • + 1 author+ 0 author

11 February 2020

Semi-solid processing (SSP), including rheoforming and thixoforming, offers a promising opportunity to manufacture net-shaped parts with complex structure and excellent mechanical properties. Owing to its low cost and short process, rheoforming has b...

(This article belongs to the Special Issue Net-Shape Die Casting of Semi-solid Alloys)
  • Article
  • Open Access
8 Citations
2,928 Views
17 Pages

23 June 2021

Aluminum alloys have been widely used in various engineering applications due to their excellent physical properties such as low density, high strength and good cutting capacity. In this paper, the semi-solid thixotropic extrusion forming process is...

(This article belongs to the Special Issue Recent Advances and Trends in Metal Forming)
  • Article
  • Open Access
6 Citations
5,152 Views
15 Pages

15 April 2018

An A356 alloy semi-solid billet was fabricated using electromagnetic stirring. After inserting the semi-solid billet into an indirect die, a thin plate of 1.2 mm thickness was fabricated by applying compression. The microstructure of the semi-solid b...

(This article belongs to the Special Issue Semi-Solid Processing of Alloys and Composites)
  • Article
  • Open Access
4 Citations
3,113 Views
11 Pages

2 December 2020

The formation mechanism of spherical grains during the strain-induced melt activation is investigated by in situ observation of the cold rotary swaged materials during heat treatment. The microstructure of the cold rotary swaged material changed from...

  • Article
  • Open Access
12 Citations
2,572 Views
19 Pages

Hot Deformation Characteristics and Dynamic Recrystallization Mechanisms of a Semi-Solid Forged AZ91D Magnesium Alloy

  • Zehua Yan,
  • Guozheng Zhang,
  • Sheng Yang,
  • Wei Zhang and ,
  • Huiyan Ning and
  • Bo Xu
  • + 1 author+ 0 author

8 August 2024

Magnesium alloys show great promise in high-speed transport, aerospace, and military technology; however, their widespread adoption encounters challenges attributed to limitations such as poor plasticity and strength. This study examines the high-tem...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
18 Citations
6,144 Views
14 Pages

Microstructural Evolution and Mechanical Properties of 7075 Aluminium Alloy during Semi-Solid Compression Deformation

  • Kai Wang,
  • Shengqing Hu,
  • Tianhao Wang,
  • Wenlong Xie and ,
  • Tong Guo,
  • Fuguo Li and
  • Rong Luo
  • + 2 authors+ 0 author

10 August 2022

Aluminium alloys are becoming increasingly popular due to the demands for high-performance lightweight components, and semi-solid metal processing (SSM) is a technique for forming near-net-shape and complex components with far fewer defects associate...

(This article belongs to the Special Issue Metals Manufacturing Techniques: Processing, Microstructure and Properties)
  • Review
  • Open Access
35 Citations
7,360 Views
25 Pages

Progress on In Situ and Operando X-ray Imaging of Solidification Processes

  • Shyamprasad Karagadde,
  • Chu Lun Alex Leung and
  • Peter D. Lee

2 May 2021

In this review, we present an overview of significant developments in the field of in situ and operando (ISO) X-ray imaging of solidification processes. The objective of this review is to emphasize the key challenges in developing and performing in s...

(This article belongs to the Section Materials Physics)
  • Article
  • Open Access
1 Citations
1,509 Views
14 Pages

17 July 2025

This study explores the feasibility of generating a globular microstructure in situ during the thixotropic 3D printing of the EN AW-4043 alloy, starting from a conventional cold-rolled wire. Thermodynamic simulations using Thermo-Calc software were f...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
17 Citations
6,469 Views
13 Pages

23 April 2020

Rare earth (RE) additions are capable of refining the α-Al phase as well as modifying the eutectic Si particles of alloys. The cooling rate in casting process should be carefully concerned when the Al-Si alloys are refined and modified by addin...

  • Article
  • Open Access
12 Citations
3,605 Views
12 Pages

6 June 2019

Application of a coating on a mold surface is widely used in the foundry industry. Changes in coating change the heat transfer at the mold–melt interface, which influences the microstructure of the casting. In this study, the effect of boron ni...

  • Article
  • Open Access
1 Citations
2,741 Views
13 Pages

Effects of Mold Temperature on the Microstructures and Tensile Properties of the Thixoforged Graphite/AZ91D Composite

  • Kejian Geng,
  • Haipeng Jiang,
  • Suqing Zhang,
  • Xin Gao and ,
  • Jianhua Wu,
  • Cuicui Sun,
  • Jixue Zhou and
  • Xinfang Zhang
  • + 3 authors+ 0 author

21 May 2023

The effects of mold temperatures on the microstructures and mechanical properties of thixoforged Grp (graphite particles)/AZ91D composites have been investigated, followed by partial remelting and thixoforging technology. The results indicate that th...

(This article belongs to the Section Metal Matrix Composites)
  • Article
  • Open Access
2 Citations
2,090 Views
17 Pages

The Effect of Powder Temperature on Semi-Solid Powder Rolling AA2024 Based on Experiments and Numerical Simulation

  • Min Wu,
  • Renye Cai,
  • Yankun Wang,
  • Xia Luo and ,
  • Junjie Yu and
  • Xiangkun Zeng
  • + 1 author+ 0 author

22 November 2023

Semi-solid powder rolling (SSPR) is widely used to produce alloy strips with fine grains and excellent performances in the automotive, aerospace and shipbuilding industries. During SSPR, powder temperature, as a very important parameter, greatly affe...

(This article belongs to the Special Issue Advanced Forming Process of Light Alloy)
  • Feature Paper
  • Article
  • Open Access
14 Citations
7,512 Views
9 Pages

9 January 2018

Two rolled plates of 7075 aluminum alloy were used as starting material. The plates were welded using a simultaneous double-sided friction stir welding (FSW) process. One way of obtaining feedstock materials for Semi-solid processing or thixoforming...

(This article belongs to the Special Issue Microstructure and Mechanical Properties of Casting Alloys)
  • Article
  • Open Access
7 Citations
4,389 Views
16 Pages

23 August 2019

The biggest challenge in semisolid processing of high-performance aluminum alloys is the narrow temperature processing windows of these alloys, and as a result, the preparation of qualified semisolid slurries is very important. High solid fraction sl...

(This article belongs to the Special Issue Net-Shape Die Casting of Semi-solid Alloys)
  • Article
  • Open Access
22 Citations
5,900 Views
12 Pages

Assessment of the Inter-Batch Variability of Microstructure Parameters in Topical Semisolids and Impact on the Demonstration of Equivalence

  • Víctor Mangas-Sanjuán,
  • María Pleguezuelos-Villa,
  • Matilde Merino-Sanjuán,
  • Mª Jesús Hernández and ,
  • Amparo Nácher,
  • Alfredo García-Arieta,
  • Daniel Peris,
  • Irene Hidalgo,
  • Lluís Soler and
  • Virginia Merino
  • + 6 authors+ 1 author

Demonstration of similar microstructure is essential for demonstrating the equivalence of generic topical products since the microstructure of semisolids may affect the drug release. The objective of this study was to compare the microstructure-defin...

(This article belongs to the Special Issue Targeted Topical Drug Delivery: Improving the Efficacy of Local Therapy and Decreasing the Risk of Off-Target Side-Effects)
  • Feature Paper
  • Article
  • Open Access
7 Citations
2,481 Views
17 Pages

10 September 2023

The non-dendritic microstructure plays a crucial role in determining the rheological properties of semi-solid alloys, which are of the utmost importance for the successful industrial application of the thixoforging process. To further understand the...

(This article belongs to the Special Issue Advances in Light Alloys and Related Composites)
  • Article
  • Open Access
1 Citations
567 Views
33 Pages

Mechanistic Comparison of Semi-Solid Extrusion 3D-Printed Printlets and Hot-Moulded Tablets: Linking Polymer–API Interactions, Microstructure, and Dissolution of Plant-Based Formulations

  • Emilija Nemickaite,
  • Pooja Todke,
  • Vaidotas Cicenas,
  • Elena Jasiūnienė and ,
  • Mindaugas Marksa and
  • Jurga Bernatoniene
  • + 1 author+ 0 author

Background: Three-dimensional printing (3DP) is rapidly advancing personalised medicine, yet systematic performance comparison with conventional manufacturing remains limited, particularly for plant-based formulations. Methods: This study compared ta...

(This article belongs to the Section Pharmaceutical Technology, Manufacturing and Devices)
  • Article
  • Open Access
2 Citations
1,632 Views
18 Pages

Effects of Cooling Rate and Solid Fraction on α-Al Phase Evolution in Rheo-Die Casting: Phase-Field Simulation and Experimental Investigation

  • Song Chen,
  • Wangwang Kuang,
  • Jian Feng,
  • Hongmiao Wang and ,
  • Fan Zhang and
  • Daquan Li
  • + 1 author+ 0 author

5 September 2025

This study aims to bridge the critical knowledge gap in understanding the dynamic microstructural evolution during high-solid-fraction semi-solid rheo-die casting process, including slurry preparation (0.1–0.3 K/s) and rheo-die casting (10&ndas...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
8 Citations
5,942 Views
24 Pages

The Microstructural Refinement of the A356 Alloy Using Semi-Solid and Severe Plastic-Deformation Processing

  • Mohamed Abdelgawad Gebril,
  • Mohd Zaidi Omar,
  • Intan Fadhlina Mohamed,
  • Norinsan Kamil Othman and ,
  • Ahmad Muhammad Aziz and
  • Osama M. Irfan
  • + 1 author+ 0 author

2 November 2023

Improving the engineering properties of A356 alloy is an appealing option for the automotive industry. This study aimed at refining and redistributing Si particles and the eutectic phase by applying T6 heat treatment to a semi-solid A356 alloy, follo...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
9 Citations
2,689 Views
13 Pages

Effect of Solution Temperature on Microstructure and Properties of Thixotropic Back-Extruded Tin–Bronze Shaft Sleeve

  • Yuhang Zhou,
  • Yunxin Cui,
  • Qingbiao Zhang,
  • Zhiqiang Yang and ,
  • Yongkun Li and
  • Han Xiao
  • + 1 author+ 0 author

29 July 2022

To study the heat-treatment process of a semi-solid copper alloy, a thixotropic back-extruded tin–bronze shaft sleeve was heat-treated at 630 °C, 660 °C, 690 °C and 720 °C for 1 h, respectively. Microstructure changes and mechan...

(This article belongs to the Special Issue Semisolid Processing and Squeeze Casting of Alloys and Composites)
  • Article
  • Open Access
6 Citations
3,070 Views
15 Pages

Understanding the Influencing Mechanism of CNTs on the Microstructures and Wear Characterization of Semi-Solid Stir Casting Al-Cu-Mg-Si Alloys

  • Li Wang,
  • Zhenlin Zhang,
  • Yajun Luo,
  • Ying Xiao and ,
  • Fengliang Tan and
  • Kecai Liu
  • + 1 author+ 0 author

16 December 2022

In this study, CNTs-reinforced Al-Cu-Mg-Si nanocomposites were successfully fabricated by high-energy ball milling (HEBM) combined with semi-solid stir casting. Then, the composites were subjected to hot extrusion. The Microstructure and Phase analys...

(This article belongs to the Section Metal Matrix Composites)
  • Article
  • Open Access
39 Citations
10,521 Views
18 Pages

3 April 2015

A novel method, powder thixoforming, for net-shape forming of the particle-reinforced Aluminum matrix composites in semi-solid state has been proposed based on powder metallurgy combining with thixoforming technology. The microstructural evolution a...

(This article belongs to the Special Issue Casting Alloy Design and Modification)
  • Article
  • Open Access
13 Citations
5,255 Views
12 Pages

Microstructure and Fabrication of Cu-Pb-Sn/Q235 Laminated Composite by Semi-Solid Rolling

  • Yubo Zhang,
  • Jiaming Liu,
  • Ying Fu,
  • Jinchuan Jie and ,
  • Yiping Lu,
  • Qingtao Guo,
  • Tongmin Wang and
  • Tingju Li
  • + 3 authors+ 0 author

13 September 2018

In the present work, Cu-Pb-Sn and Q235 laminated composite were fabricated by a horizontal semisolid rolling procedure. The interfacial structure, elemental distribution, and properties of the composite were investigated. Finite-element simulation wa...

  • Article
  • Open Access
3 Citations
1,576 Views
15 Pages

Microstructure Evolution During Preparation of Semi-Solid Billet for 7075 Aluminum Alloy by EASSIT Process

  • Yanghu Hu,
  • Ming Chang,
  • Shuqin Fan,
  • Boyang Liu and ,
  • Yongfei Wang,
  • Shuangjiang Li,
  • Chao Zhang,
  • Peng Zhang and
  • Shengdun Zhao
  • + 4 authors+ 0 author

17 April 2025

The 7075 aluminum alloy semi-solid billet is prepared using the extrusion alloy semi-solid isothermal treatment (EASSIT) process. These findings indicate that as the isothermal time increases, there is a noticeable increase in both the average grain...

  • Article
  • Open Access
14 Citations
3,395 Views
22 Pages

30 November 2020

Electromagnetic stirring (EMS) has become one of the most important branches of the electromagnetic processing of materials. However, a deep understanding of the influence of the EMS on the thermo-fluid flow of the aluminium alloy melt, and consequen...

(This article belongs to the Special Issue Advances in Materials Processing)
  • Feature Paper
  • Article
  • Open Access
9 Citations
3,090 Views
14 Pages

Compressive Rheological Behavior and Microstructure Evolution of a Semi-Solid CuSn10P1 Alloy at Medium Temperature and Low Strain

  • Zhangxing Liu,
  • Rongfeng Zhou,
  • Wentao Xiong,
  • Zilong He and ,
  • Tao Liu and
  • Yongkun Li
  • + 1 author+ 0 author

12 January 2022

Copper–tin alloys are widely used in the machining and molding of sleeves, bearings, bearing housings, gears, etc. They are a material used in heavy-duty, high-speed and high-temperature situations and subject to strong friction conditions due...

(This article belongs to the Topic Processing, Analysis, Modelling and Mechanics of Materials and Structures)
  • Review
  • Open Access
53 Citations
8,313 Views
19 Pages

Due to complex interdependent relationships affecting their microstructure, topical semisolid drug formulations face unique obstacles to the development of generics compared to other drug products. Traditionally, establishing bioequivalence is based...

(This article belongs to the Special Issue Semisolid Dosage (Volume II))

of 4