Skip to Content

352 Results Found

  • Article
  • Open Access
619 Views
17 Pages

Effects of Cold Rolling on the Microstructure and Properties of Al/TiB2 Laminated Composites Fabricated by Accumulative Roll Bonding

  • Wenchao Sun,
  • Zhilei Xiang,
  • Jihao Li,
  • Zian Yang and ,
  • Yang Han and
  • Ziyong Chen
  • + 1 author+ 0 author

8 March 2026

Al/TiB2 aluminum alloy laminates were fabricated using a combination of accumulative roll bonding (ARB) and cold rolling processes. The Al/TiB2 interface and microstructure were meticulously characterized by scanning electron microscopy (SEM) and tra...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
7 Citations
3,027 Views
24 Pages

Interfacial Bonding Properties Experimental Research of 316L Stainless Steel–Carbon Steel Clad Rebar in the Process of Intermediate and Finish Rolling

  • Gaozhen Liang,
  • Jianping Tan,
  • Xuehai Qian,
  • Yong Xiang and ,
  • Zhe Gou,
  • Binbin Zhang and
  • Taili Chen
  • + 2 authors+ 0 author

23 January 2025

The interfacial bonding properties of stainless steel clad (SSC) rebars determine whether they can be widely used. In the industrial production of SSC rebars, the process of intermediate and finish rolling of the microstructure evolution, element dif...

  • Article
  • Open Access
176 Views
19 Pages

The Microstructure and Mechanical Properties of the Bonding Layer of a Bimetallic Ring Processed by Hot Rolling Based on a Centrifugal Casting Ring Blank

  • Yanlong Jia,
  • Mengmeng Pei,
  • Fangcheng Qin,
  • Liuqing Yang and ,
  • Qinglin Pei,
  • Boqiong Li and
  • Huiping Qi
  • + 2 authors+ 0 author

29 October 2026

The compact cast-rolling compound forming of bimetallic rings is an efficient process for manufacturing large bimetallic rings, in which hot ring rolling is crucial for the microstructure and final performance of bimetallic rings. A 40Cr/Q345B bimeta...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
32 Citations
8,277 Views
10 Pages

Roll bonding (RB) of bimetal laminates is a solid phase method of bonding and has been widely used in the manufacturing of layered strips. This process is widely used for brazing sheet for automotive, aerospace, vessel, and electrical industries. In...

(This article belongs to the Section Innovations in Materials Science and Materials Processing)
  • Article
  • Open Access
6 Citations
2,521 Views
15 Pages

11 April 2022

Mg-(Al-)Ti laminated sheets with large bonding interfaces were prepared by a differential temperature hot-rolling process, in which the preheating treatment of Ti was 25–100 °C higher than that of Mg. The rolled sheets contained different A...

  • Article
  • Open Access
14 Citations
5,858 Views
18 Pages

Laminated TRIP/TWIP Steel Composites Produced by Roll Bonding

  • Yangxi Qiu,
  • Nico Kaden,
  • Matthias Schmidtchen,
  • Ulrich Prahl and ,
  • Horst Biermann and
  • Anja Weidner
  • + 1 author+ 0 author

7 February 2019

In order to investigate the roll bonding of high-alloy transformation induced plasticity (TRIP) and twinning induced plasticity (TWIP) steel, roll-bonded sheets of the TRIP and TWIP steel were manufactured starting from hot rolling, followed by brush...

  • Article
  • Open Access
17 Citations
5,942 Views
20 Pages

25 July 2019

In this work, the interface characteristics and resulting bond strength were investigated for roll bonded steel-aluminum composites with nickel interlayers, both after rolling and after post-rolling heat treatments at 400 °C–550 °C. Aft...

  • Article
  • Open Access
9 Citations
3,815 Views
15 Pages

Roll Bonding of Al-Based Composite Reinforced with C10 Steel Expanded Mesh Inlay

  • Yaroslav Frolov,
  • Maxim Nosko,
  • Andrii Samsonenko,
  • Oleksandr Bobukh and
  • Oleg Remez

29 June 2021

The most complex issue related to the design of high efficiency composite materials is the behavior of the reinforcing component during the bonding process. This study presents numerical and experimental investigations of the shape change in the rein...

(This article belongs to the Special Issue Casting and Rolling of Alloys)
  • Article
  • Open Access
9 Citations
6,618 Views
12 Pages

15 December 2014

Ultrafine grained sheets were prepared from a twin-roll cast AA8006 aluminium alloy using accumulative roll-bonding process at room temperature. The evolution of microstructure of sheets after three accumulative roll-bonding passes during isochronal...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
4 Citations
5,157 Views
18 Pages

22 January 2025

Sensor miniaturization offers significant advantages, including enhanced SoC integration efficiency, reduced cost, and lightweight design. While the roll-to-roll printed electronics fabrication process is advantageous for the mass production of senso...

(This article belongs to the Special Issue Feature Papers in Physical Sensors 2024)
  • Feature Paper
  • Review
  • Open Access
76 Citations
22,070 Views
27 Pages

Roll Bonding Processes: State-of-the-Art and Future Perspectives

  • Haris Ali Khan,
  • Kamran Asim,
  • Farooq Akram,
  • Asad Hameed and ,
  • Abdullah Khan and
  • Bilal Mansoor
  • + 1 author+ 0 author

25 August 2021

Roll bonding (RB) describes solid-state manufacturing processes where cold or hot rolling of plates or sheet metal is carried out for joining similar and dissimilar materials through the principle of severe plastic deformation. This review covers the...

(This article belongs to the Special Issue Design, Development and Characterization of Advanced Metallic Materials)
  • Article
  • Open Access
8 Citations
2,350 Views
14 Pages

Effect of Temperature and Strain on Bonding of Similar AA3105 Aluminum Alloys by the Roll Bonding Process

  • Mauro Carta,
  • Pasquale Buonadonna,
  • Barbara Reggiani,
  • Lorenzo Donati and ,
  • Francesco Aymerich and
  • Mohamad El Mehtedi
  • + 1 author+ 0 author

14 August 2024

Accumulative roll bonding (ARB) is a severe plastic deformation process that enables the production of materials with ultrafine microstructures and enhances the characteristics of the base material, particularly in metal matrix composites. The primar...

(This article belongs to the Special Issue Metal Rolling and Heat Treatment Processing)
  • Article
  • Open Access
6 Citations
3,298 Views
14 Pages

Patterning of Surfaces for Subsequent Roll Bonding in a Low-Oxygen Environment Using Deformable Mesh Inlays

  • Yaroslav Frolov,
  • Oleksandr Bobukh,
  • Andrii Samsonenko and
  • Florian Nürnberger

Efficient roll bonding for the manufacturing of clad strips not only requires surface activation but also is improved by a surface patterning to reduce the initial contact area. This increases contact stresses and facilitates a joining without an inc...

  • Review
  • Open Access
185 Citations
14,833 Views
32 Pages

Accumulative Roll Bonding—A Review

  • Seyed Mahmoud Ghalehbandi,
  • Massoud Malaki and
  • Manoj Gupta

3 September 2019

Different manufacturing processes can be utilized to fabricate light-weight high-strength materials for their applications in a wide spectrum of industries such as aerospace, automotive and biomedical sectors among which accumulative roll bonding (AR...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
7 Citations
2,702 Views
18 Pages

7 May 2024

In the present study, the hot roll bonding process of 7000 series aluminum alloy laminated materials was numerically simulated and investigated using the finite element method, and the process parameters were experimentally verified by properties tes...

(This article belongs to the Special Issue Numerical Simulation and Experimental Research of Metal Rolling)
  • Feature Paper
  • Article
  • Open Access
7 Citations
3,828 Views
10 Pages

Cold Roll Bonding of Tin-Coated Steel Sheets with Subsequent Heat Treatment

  • Illia Hordych,
  • Khemais Barienti,
  • Sebastian Herbst,
  • Hans Jürgen Maier and
  • Florian Nürnberger

4 June 2021

One possibility to increase the interface strength of cold roll bonded materials is the application of a thin intermediate layer. In the present study, a tin coating was employed to strengthen the interface formed between cold roll bonded steel sheet...

(This article belongs to the Special Issue Casting and Rolling of Alloys)
  • Article
  • Open Access
14 Citations
5,123 Views
9 Pages

Thermal Conductivity of an AZ31 Sheet after Accumulative Roll Bonding

  • Zuzanka Trojanová,
  • Kristýna Halmešová,
  • Zdeněk Drozd,
  • Vladimír Šíma and ,
  • Pavel Lukáč,
  • Ján Džugan and
  • Peter Minárik
  • + 2 authors+ 0 author

2 July 2018

Accumulative roll bonding (ARB) is one of the methods of severe plastic deformation which is relevant for industrial production of sheets. While mechanical properties of several magnesium alloys subjected to the ARB process have been studied, the phy...

(This article belongs to the Special Issue Microstructure and Physical Properties of Magnesium Alloys and Composites)
  • Article
  • Open Access
7 Citations
2,111 Views
18 Pages

13 July 2023

In order to understand the strengthening and the failure mechanism of accumulative roll bonding (ARB)-processed AZ63 Mg alloy, the interfacial bonding and fracture behavior of an ARB-processed AZ63 sheet were studied through electron microscopic anal...

(This article belongs to the Special Issue Advanced Magnesium Alloys: Processing, Microstructure, Property Control, and Sectors of Fabrication Technologies)
  • Article
  • Open Access
3 Citations
1,804 Views
19 Pages

Integrated Computational Materials Engineering in the Hot Roll Bonding of Ultra-Thick 45 Steel Plates

  • Jianbo Jiang,
  • Qingwen Qi,
  • Mengnie Li,
  • Hengyong Bu and ,
  • Huarong Qi and
  • Yonghua Duan
  • + 1 author+ 0 author

20 February 2025

To resolve the challenges of weak bonding interface and to avoid expensive and time-consuming trials, integrated computational materials engineering (ICME) was applied to study the hot roll bonding and forming of ultra-thick 45 steel stacked assembli...

(This article belongs to the Special Issue Numerical Simulation of Metal Forming Process)
  • Article
  • Open Access
8 Citations
6,934 Views
7 Pages

Hard Copper with Good Electrical Conductivity Fabricated by Accumulative Roll-Bonding to Ultrahigh Strains

  • Gongcheng Yao,
  • Qingsong Mei,
  • Juying Li,
  • Congling Li and ,
  • Ye Ma,
  • Feng Chen,
  • Guodong Zhang and
  • Bing Yang
  • + 3 authors+ 0 author

17 May 2016

By modifying the accumulative roll-bonding (ARB) procedures, accumulative roll-bonding (ARB) processing up to 30 cycles (N) with a 50% thickness reduction per cycle (equivalent strain = 24) at room temperature was conducted on pure copper. The bondin...

  • Article
  • Open Access
7 Citations
3,622 Views
15 Pages

18 March 2019

The void closure mechanism during the roll-bonding process was investigated using a multiscale approach, which includes contact deformation at the macro-scale and atomic bonding at the micro-scale. The closure process of the voids was observed using...

(This article belongs to the Special Issue Multiscale Modeling of Materials and Processes)
  • Article
  • Open Access
3 Citations
1,835 Views
12 Pages

10 September 2024

Texture evolution during accumulative roll-bonding (ARB) is complicated because of the change in the through-thickness position that results from repeated cutting–stacking and roll-bonding. In this study, a macro–micro two-scale modeling...

(This article belongs to the Section Computation and Simulation on Metals)
  • Article
  • Open Access
2,017 Views
24 Pages

FEM and Experimental Investigation of the Joint Deformation Behavior of Low-Alloy Steel and Commercially Pure Titanium During High-Temperature Vacuum Roll Bonding

  • Nikita Romanovich Borisenko,
  • Alexander Vadimovich Muntin,
  • Alexey Gennadievich Zinyagin,
  • Maria Olegovna Kryuchkova and ,
  • Alexander Grigorevich Kolesnikov and
  • Alla Anatolievna Filippova
  • + 1 author+ 0 author

This study analyzes the joint deformation behavior of low-alloy steel P355GH and commercially pure titanium Grade 1 in thick bimetallic pack assemblies during high-temperature vacuum roll bonding (HTVRB). Rheological properties were determined using...

(This article belongs to the Special Issue Advances in Material Forming: 2nd Edition)
  • Article
  • Open Access
38 Citations
5,951 Views
14 Pages

Influence of Accumulative Roll Bonding on the Texture and Tensile Properties of an AZ31 Magnesium Alloy Sheets

  • Zuzanka Trojanová,
  • Ján Džugan,
  • Kristýna Halmešová,
  • Gergely Németh and ,
  • Peter Minárik,
  • Pavel Lukáč and
  • Jan Bohlen
  • + 2 authors+ 0 author

5 January 2018

Deformation behaviour of rolled AZ31 sheets that were subjected to the accumulative roll bonding was investigated. Substantially refined microstructure of samples was achieved after the first and second pass through the rolling mill. Sheets texture w...

  • Article
  • Open Access
4 Citations
2,518 Views
15 Pages

1 March 2023

In this research, corrugated Mg/Al clad sheet with good interface bonding was prepared with a rolling mill of upper corrugated roll and a lower flat roll under the conditions of 35% reduction and 400 °C. The mechanical properties of the corrugate...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
602 Views
16 Pages

Roll Bonding of Aluminium Coupons Using the Established Fully Fledged Offline Fabrication Facilities

  • Joseph Moema,
  • Charles Siyasiya,
  • Veronica Morudu,
  • Maje Phasha and
  • Mbavhalelo Maumela

The South African aluminium industry faces technical challenges related to cladded ingots used in automotive heat exchangers, creating a need for offline processing methods that can replicate rolling processes like roll bonding, as large-scale indust...

(This article belongs to the Topic Advances in Processing, Microstructure and Mechanical Properties of Lightweight Alloys)
  • Feature Paper
  • Article
  • Open Access
4 Citations
3,249 Views
18 Pages

Deformation Lenses in a Bonding Zone of High-Alloyed Steel Laminates Manufactured by Cold Roll Bonding

  • Mikhail Seleznev,
  • Christoph Renzing,
  • Matthias Schmidtchen,
  • Ulrich Prahl and ,
  • Horst Biermann and
  • Anja Weidner
  • + 1 author+ 0 author

30 March 2022

The combination of strength of transformation-induced plasticity (TRIP) steel and ductility of twinning-induced plasticity (TWIP) steel can be achieved by manufacturing laminated composites via cold roll bonding (CRB). Work hardening of the surface b...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
9 Citations
3,033 Views
11 Pages

Microstructure and Mechanical Properties of Al-Mg-Si Similar Alloy Laminates Produced by Accumulative Roll Bonding

  • Zhigang Li,
  • Hao Jiang,
  • Minghui Wang,
  • Hongjie Jia and ,
  • Hongjiang Han and
  • Pinkui Ma
  • + 1 author+ 0 author

27 July 2021

As the applications of heterogeneous materials expand, aluminum laminates of similar materials have attracted much attention due to their greater bonding strength and easier recycling. In this work, an alloy design strategy was developed based on acc...

(This article belongs to the Topic Modern Technologies and Manufacturing Systems)
  • Article
  • Open Access
334 Views
12 Pages

A Numerical Assessment on the Textural Stability of {112}<111> After Asymmetric Accumulative Roll-Bonding (AARB)

  • Rui Wang,
  • Xuhui Bai,
  • Lihong Su,
  • Guangyang Jiang and ,
  • Yu Sun,
  • Yu Liu,
  • Yu Zhu and
  • Xi Huang
  • + 3 authors+ 0 author

25 May 2026

In this study, the stability of the {112}<111> rolling texture component during asymmetric accumulative roll-bonding (AARB) was systematically investigated using a crystal plasticity finite element method (CPFEM) model. The CPFEM predictions sh...

(This article belongs to the Special Issue Applications of Computational Methods in Metallic Materials Manufacturing Processes)
  • Article
  • Open Access
2 Citations
1,431 Views
19 Pages

23 November 2024

Roll-bonding has rarely been applied to prepare rods for negative thermal expansion metamaterials (NTEMs). Parameters for quantitatively assessing the isotropy and cyclic thermal stability of the thermal expansion coefficient α of NTEMs are lac...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
6 Citations
3,177 Views
13 Pages

25 January 2024

In this study, AA1050/AA6061 laminated composites were prepared by three-cycle accumulative roll bonding (ARB) and subsequent rolling. The effects of the rolling process on the microstructure evolution and mechanical properties of AA1050/AA6061 lamin...

(This article belongs to the Special Issue Advances in High-Performance Non-ferrous Materials—2nd Volume)
  • Article
  • Open Access
25 Citations
3,265 Views
20 Pages

27 November 2020

This paper aimed to propose the fabrication of light, Al/Mg/Al multilayered composite. Initially prepared three-layered feedstock was subjected to deformation during four rolling cycles (passes) using the conventional and modified accumulative roll b...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Communication
  • Open Access
1,055 Views
8 Pages

Quantitative Analysis of Shear Texture Evolution in Accumulative Roll Bonded AA 1060 Aluminum Alloy

  • Peng Du,
  • Chao Li,
  • Lei Liu,
  • Bao Chen and ,
  • Mingyu Li,
  • Zhijie Wang and
  • Sha Liu
  • + 2 authors+ 0 author

17 April 2025

AA 1060 aluminum alloy underwent roll bonding with reductions of 25% and 35%, followed by accumulative roll bonding (ARB) for up to seven cycles at ambient temperature. The evolution of surface layer texture throughout the ARB process was analyzed us...

(This article belongs to the Special Issue Microstructure and Deformation of Advanced Alloys)
  • Article
  • Open Access
7 Citations
2,972 Views
30 Pages

Effect of the Strength of Initial Aluminium on the Bonding Properties and Deformation Coordination of Ti/Al Composite Sheets by the Cold Roll Bonding Process

  • Jiageng Liu,
  • Jiang Wu,
  • Qian Liu,
  • Shuai Ji and ,
  • Xinlu Zheng,
  • Feng Wang and
  • Jiang Wang
  • + 2 authors+ 0 author

18 November 2022

Ti/Al composite sheets were prepared using the cold rolling process, and different initial aluminium strengths were considered. The results showed that the peel strength of the Ti/Al composite sheet increased with the increasing initial strength of a...

(This article belongs to the Special Issue Advances in Laminated Metallic Composites)
  • Article
  • Open Access
15 Citations
3,813 Views
11 Pages

8 March 2020

In this work, accumulative pack-roll bonding successfully manufactured the Ni/Ti/Nb multilayer composite. The microstructure evolution and mechanical properties of the composite during the accumulative roll bonding (ARB) process were investigated by...

  • Feature Paper
  • Article
  • Open Access
30 Citations
8,107 Views
14 Pages

Ti/Al Multi-Layered Sheets: Accumulative Roll Bonding (Part A)

  • Jan Romberg,
  • Jens Freudenberger,
  • Hansjörg Bauder,
  • Georg Plattner and ,
  • Hans Krug,
  • Frank Holländer,
  • Juliane Scharnweber,
  • Andy Eschke,
  • Uta Kühn and
  • Ludwig Schultz
  • + 9 authors+ 4 authors

2 February 2016

Co-deformation of Al and Ti by accumulative roll bonding (ARB) with intermediate heat treatments is utilized to prepare multi-layered Ti/Al sheets. These sheets show a high specific strength due to the activation of various hardening mechanisms impos...

  • Article
  • Open Access
68 Citations
7,450 Views
14 Pages

Fabrication of Al/Mg/Al Composites via Accumulative Roll Bonding and Their Mechanical Properties

  • Jinfeng Nie,
  • Mingxing Liu,
  • Fang Wang,
  • Yonghao Zhao and ,
  • Yusheng Li,
  • Yang Cao and
  • Yuntian Zhu
  • + 2 authors+ 0 author

23 November 2016

Al(1060)/Mg(AZ31)/Al(1060) multilayered composite was successfully produced using an accumulative roll bonding (ARB) process for up to four cycles at an elevated temperature (400 °C). The microstructure evolution of the composites and the bonding cha...

  • Article
  • Open Access
8 Citations
3,729 Views
18 Pages

Experimental Study of Crack Propagation through Cladded 316L/S355 Steel Produced by the Hot-Roll Bonding Process

  • Edvard Bjelajac,
  • Andrej Skumavc,
  • Fidan Smaili,
  • Gorazd Lojen and ,
  • Jožef Predan and
  • Tomaž Vuherer
  • + 1 author+ 0 author

15 July 2023

A hot-rolled clad plate made of 316L stainless steel and S355 carbon steel was produced in a real industrial environment via GMAW welding, vacuuming, preheating to 1240 °C, and hot-roll bonding on four stand plate mills in nine passes with reduct...

  • Article
  • Open Access
19 Citations
5,371 Views
14 Pages

Research on the Bonding Interface of High Speed Steel/Ductile Cast Iron Composite Roll Manufactured by an Improved Electroslag Cladding Method

  • Yulong Cao,
  • Zhouhua Jiang,
  • Yanwu Dong,
  • Xin Deng and ,
  • Lev Medovar and
  • Ganna Stovpchenko
  • + 1 author+ 0 author

28 May 2018

In the present study, a new electroslag cladding method by using of the advanced current supplying mold technology was used for manufacturing the high speed steel (HSS)/ductile cast iron (DCI) composite roll. The graphite morphology, matrix microstru...

(This article belongs to the Special Issue Ironmaking and Steelmaking)
  • Article
  • Open Access
11 Citations
2,585 Views
9 Pages

26 September 2021

Carbon nanotubes (CNTs) reinforced aluminum matrix nanocomposites were fabricated by Accumulative Roll Bonding (ARB). The surface morphologies, mechanical properties, grains texture and orientation of the Al/CNTs nanocomposites were characterized, an...

  • Article
  • Open Access
20 Citations
10,760 Views
14 Pages

Particle Based Alloying by Accumulative Roll Bonding in the System Al-Cu

  • Christian W. Schmidt,
  • Patrick Knödler,
  • Heinz Werner Höppel and
  • Mathias Göken

7 November 2011

The formation of alloys by particle reinforcement during accumulative roll bonding (ARB), and subsequent annealing, is introduced on the basis of the binary alloy system Al-Cu, where strength and electrical conductivity are examined in different micr...

  • Article
  • Open Access
1 Citations
773 Views
14 Pages

15 February 2026

Grain size plays a decisive role in governing the interface evolution and mechanical properties of ultra-thin metal composite foils. This study systematically investigates this relationship in roll-bonded C7701/Ti/C7701 (Cu-Ni-Zn alloy) composite foi...

(This article belongs to the Section Metal Matrix Composites)
  • Article
  • Open Access
9 Citations
2,886 Views
13 Pages

Anisotropic Behavior of Al1050 through Accumulative Roll Bonding

  • Sasan Sattarpanah Karganroudi,
  • Bahman Hatami Nasab,
  • Davood Rahmatabadi,
  • Mina Ahmadi and ,
  • Mohammad Delshad Gholami,
  • Mehdi Kasaeian-Naeini,
  • Ramin Hashemi,
  • Ahmad Aminzadeh and
  • Hussein Ibrahim
  • + 4 authors+ 0 author

16 November 2021

In this study, Al1050 sheets were fabricated in five passes using the accumulative roll bonding (ARB) technique. For a more accurate and complete investigation, different tests were used, including a uniaxial tensile test. The results show that elong...

  • Article
  • Open Access
110 Views
33 Pages

8 November 2026

A parametric finite element (FE) framework incorporating a finite-thickness equivalent bonding layer is developed for cold roll-beating of explosively bonded Fe/Al layered composites. The equivalent layer thickness is identified from interfacial char...

  • Article
  • Open Access
2 Citations
4,941 Views
16 Pages

Solid-State Recycling of AA6063 Aluminum Chips via Accumulative Roll Bonding: A Green Pathway to High-Performance Materials

  • Mauro Carta,
  • Noomane Ben Khalifa,
  • Pasquale Buonadonna,
  • Francesco Aymerich and
  • Mohamad El Mehtedi

19 September 2025

Accumulative Roll Bonding (ARB) is a severe plastic deformation process typically used to produce ultra-fine-grained structures. This study investigates the feasibility of using the ARB process to recycle aluminum chips from an Al-Mg-Si alloy (AA6063...

  • Article
  • Open Access
7 Citations
1,667 Views
15 Pages

23 May 2025

The interface morphology plays an important role in the mechanical properties of laminated metal composites (LMCs). In this study, binary LMCs with different crystallographic characteristics, namely Fe/Al (BCC/FCC), Ni/Al (FCC/FCC), and Mg/Al (HCP/FC...

(This article belongs to the Special Issue Research Progress of Crystal in Metallic Materials)
  • Article
  • Open Access
3 Citations
3,159 Views
11 Pages

20 April 2019

To ensure the formation of a sound shell-core bond interface free of defects between the shell and the core in work rolls used in the finishing stands of hot strip mills, a complete fusion of this interface must be achieved, avoiding excessive mixing...

  • Article
  • Open Access
1,998 Views
11 Pages

11 November 2022

Metallic glasses (MGs) have excellent properties, such as high strength and low elastic modulus, can be used as reinforcement in metal matrix composites. In this paper, aluminum matrix composites reinforced with Fe80Si9B11 MG strips with different we...

(This article belongs to the Special Issue Solidification and Casting of Engineering Metals: Modeling and Simulation)
  • Article
  • Open Access
18 Citations
3,080 Views
14 Pages

Studies on Hot-Rolling Bonding of the Al-Cu Bimetallic Composite

  • Ioana-Monica Sas-Boca,
  • Dana-Adriana Iluțiu-Varvara,
  • Marius Tintelecan,
  • Claudiu Aciu and ,
  • Dan Ioan Frunzӑ and
  • Florin Popa
  • + 1 author+ 0 author

9 December 2022

Through the approaches in this article, an attempt was made to analyze the bonding of Al-Cu bimetallic composite layers and the highlight of the diffusion at the boundary between the layers, by hot rolling. An aluminum alloy 6060 plate (EN-AW AlMgSi)...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
10 Citations
2,962 Views
13 Pages

Fabrication of AlZn4SiPb/Steel Clad Sheets by Roll Bonding: Their Microstructure and Mechanical Properties

  • Pengju Wang,
  • Ning Zhong,
  • Liyue Tu,
  • Weiming Hong and ,
  • Yanming Lv,
  • Yonghong Chen,
  • Jian Sun,
  • Caiyong Luo,
  • Zejun Chen and
  • Qian Tang
  • + 5 authors+ 0 author

9 February 2023

An AlZn4SiPb/steel clad composite was prepared via roll bonding at room temperature. The influence of solution and aging treatment on the structure and performance of the clad composite was investigated. The results show that the Al/steel clad compos...

(This article belongs to the Special Issue Advances in Laminated Metallic Composites)

of 8