Free electron lasers (FELs) are becoming more and more popular as sources of radiation for research purposes in many fields of science. They are frequently employed in second harmonic generation (SHG) studies. SHG is an important effect of nonlinear...
We experimentally demonstrated the generation of narrow energy-spread electron beams with enhanced energy levels using a hybrid laser-plasma wakefield accelerator. An experiment featuring two-color electron beams showed that after the laser pump reac...
Compact laser plasma accelerators generate high-energy electron beams with increasing quality. When used in inverse Compton backscattering, however, the relatively large electron energy spread jeopardizes potential applications requiring small bandwi...
The linear accelerator system of the PBP-CMU Electron Linac Laboratory has been designed with the aim of generating free-electron lasers (FELs) in the mid-infrared (MIR) and terahertz (THz) regions. The quality of the radiation is strongly dependent...
Low-viscosity epoxy-containing diluents are used to reduce the initial viscosity of highly filled, wear-resistant epoxy systems and to improve filler wetting and dispersion. This study determined physical parameters by an atomic-increment approach an...
Terahertz (THz) radiation has attracted much attention in new scientific and industrial applications. There has been significant recent progress in generating THz with accelerators. To investigate the collective behavior of electron dynamics, we have...
High-resolution imaging using Transmission Electron Microscopy (TEM) is essential for applications such as grain boundary analysis, microchip defect characterization, and biological imaging. However, TEM images are often compromised by electron energ...
This study presents the design and development of electromagnetic dipole magnets for use as beam dumps and spectrometers in the MIR and THz free-electron laser (FEL) beamlines at the PBP-CMU Electron Linac Laboratory (PCELL). The magnets were optimiz...
As worldwide awareness about global climate change spreads, green electronics are becoming increasingly popular as an alternative to diminish pollution. Thus, nowadays energy efficiency is a paramount characteristic in electronics systems to obtain s...
High-average-power extreme ultraviolet (EUV) sources are essential for large-scale nanoscale chip manufacturing, yet commercially available laser-produced plasma sources face challenges in scaling to the kilowatt level. We propose a novel scheme that...
This study investigates how scattering foil materials and sampling holder placement affect electron energy distribution in electron beams from a modified medical linear accelerator for FLASH radiotherapy. We analyze electron energy spectra at various...
We report here on spontaneous undulator radiation and free electron laser calculations after a 10-m long transport line (COXINEL) using a Laser Plasma acceleration (LPA) source. The line enables the manipulation of the properties of the produced elec...
Laser plasma acceleration (LPA) capable of providing femtosecond and GeV electron beams in cm scale distances brings a high interest for different applications, such as free electron laser and future colliders. Nevertheless, LPA high divergence and e...
Laser–plasma accelerators (LPAs) have been demonstrated as one of the candidates for traditional accelerators and have attracted increasing attention due to their compact size, high acceleration gradients, low cost, etc. However, LPAs for posit...
We present measurements and analysis of the longitudinal timing jitter of a Beijing Electron Positron Collider (BEPCII) linear accelerator electron gun. We simulated the longitudinal jitter effect of the gun using PARMELA to evaluate beam performance...
We present a study of an innovative scheme to generate high repetition rate (MHz-class) GeV electron beams by adopting a two-pass two-way acceleration in a super-conducting Linac operated in Continuous Wave (CW) mode. The beam is accelerated twice in...
A THz coherent undulator radiation (THz-CUR) source has been developed at the Institute of Advanced Energy, Kyoto University. A photocathode Radio-Frequency (RF) gun and a bunch compressor chicane are used for generating short-bunch electron beams. W...
Driven by life-science applications, a mega-electron-volt Scanning Transmission Electron Microscope (MeV-STEM) has been proposed here to image thick frozen biological samples as a conventional Transmission Electron Microscope (TEM) may not be suitabl...
Power electronics converters are traditionally designed regarding efficiency, power density, cost, and reliability figures of merit. Today, with the extreme spread of power electronic applications in our modern societies, together with the earth limi...
X-ray spectroscopy of highly charged heavy ions is an important tool for the investigation of many topics in atomic physics. Such highly charged ions, in particular hydrogen-like uranium, are investigated at heavy ion storage rings, where high charge...
The performance of commercially available retrofit LED tubes intended for the replacement of linear fluorescent lamps is measured and analyzed with respect to “real-world” installed electronic ballasts, as ascertained through field recove...
The theoretical study of the effect of electron beam parameters, in particular, the emittance and its asymmetry on the radiation from relativistic electrons in undulators is conducted both analytically and numerically. The reasons for the odd and eve...
Sustainability and energy prices make the energy production from renewable sources necessary and photovoltaic energy is ideal on an urban scale and on isolated facilities. However, when the demand for energy is at night, as in lighting installation,...
This paper revises the use of polymer nanocomposites to attenuate high-energy electromagnetic radiation (HE-EMR), such as gamma radiation. As known, high-energy radiation produces drastic damage not only in facilities or electronic devices but also t...
This paper presents a technique for extracting the initial parameters of the longitudinal phase space of freshly injected bunches in an electron storage ring. This technique combines simulation of single-bunch longitudinal phase space evolution with...
EuPRAXIA@SPARC_LAB is an FEL (Free-Electron Laser) user facility currently under construction at INFN-LNF in the framework of the EuPRAXIA collaboration. The electron beam will be accelerated to 1 GeV by an X-band RF linac followed by a plasma wakefi...
A test-Accelerator as Coherent Terahertz Source (t-ACTS) has been under development at Tohoku University, in which an intense coherent terahertz radiation is generated from the short electron bunches. Velocity bunching scheme in a traveling wave acce...
Along with the development of FEL X-ray sources, the design and the construction of Compton Back-Scattering (CBS) devices for different applications are being pursued. These sources are designed to provide monochromatic, high peak brightness tunable...
Graphene is the first 2D crystal ever isolated by mankind. It consists of a single graphite layer, and its exceptional properties are revolutionizing material science. However, there is still a lack of convenient mass-production methods to obtain def...
Carbon nanotube (CNT)-based cold cathodes are promising sources of field emission electrons for advanced electron devices, particularly for ultra-high-resolution imaging systems, due to their high brightness and low energy spread. While the electron...
A hollow cathode plasma source has been operated automatically, demonstrating independent control of plasma ion energy and ion current density for plasma ion-assisted electron beam-deposited titania (TiO2). The lanthanum hexaboride hollow cathode des...
In this study, the DFT/M062X/PCM method was applied to investigate thermodynamic and kinetic aspects of reactions involved in possible mechanisms of antioxidant activity of caffeic acid against HOO● radicals in aqueous medium at different pH va...
Highly charged heavy ions at rest offer a wide spectrum of precision measurements. The GSI Helmholtzzentrum für Schwerionenforschung GmbH is able to deliver ions up to U92+. As the production of these heavy, highly charged ions requires high kin...
In this paper, we update the phase-space factors for all two-neutrino double electron capture processes. The Dirac–Hartree–Fock–Slater self-consistent method is employed to describe the bound states of captured electrons, enabling a...
Zirconia is widely used for customized implant abutments owing to its esthetics, strength, and biocompatibility; however, the optimal surface modification for soft-tissue sealing and bone metabolic remains uncertain. This study evaluated how glass&nd...
We present the generation of attosecond gamma rays via inverse Compton scattering within the framework of laser wakefield acceleration through 2D Particle-In-Cell simulations. Utilizing the near-threshold ionization injection mechanism, an attosecond...
The growing world energy consumption, with reliance on conventional energy sources and the associated environmental pollution, are considered the most serious threats faced by mankind. Heterogeneous photocatalysis has become one of the most frequentl...
This study investigates the effect of aluminum (Al) on the microstructure, micro-hardness, and wettability of environmentally friendly Sn-20Bi-xAl (x = 0, 0.1, 0.3, 0.5 (wt.%)) solder alloys. Scanning electron microscopy (SEM) with energy dispersive...
MXene and graphene based thin, flexible and low-density composite were prepared by cost effective spray coating and solvent casting method. The fabricated composite was characterized using Raman spectroscopy, X-ray diffraction (XRD), scanning electro...
The wetting behavior of molten Zn and Zn-Sb alloy and X80 steel in a high vacuum environment was studied by the modified sessile drop method. The wetting morphology and interface structure were analyzed by scanning electron microscope and energy disp...
New zirconia-reinforced lithium silicate ceramics (ZLS) could be a viable alternative to zirconium (Y-TZP) in the manufacture of implantological abutments—especially in aesthetic cases—due to its good mechanical, optical, and biocompatibi...
A theoretical study of the synchrotron radiation (SR) from electrons in periodic magnetic fields with non-periodic magnetic components is presented. It is applied to several free electron lasers (FELs) accounting for the real characteristics of their...
Titanium oxide nanocoatings were synthesized on the surface of monocrystalline silicon and ultra-fine-grained titanium by atomic layer deposition (ALD) using titanium tetrachloride (TiCl4) and titanium tetraisopropoxide (TTIP). The morphology of the...
We report the start-to-end modeling of our accelerator lattice design employing a laser-assisted bunch compression (LABC) scheme in an X-ray free electron laser (XFEL), using the proposed Matter-Radiation Interactions in Extremes (MaRIE) XFEL paramet...
Four 5,5′-diphenylhydantoin Schiff bases possessing different aromatic species (SB1–SB4) were recently synthesized and characterized using spectroscopic and electrochemical tools. The present study aimed to ascertain the anticonvulsant ac...
The unique energy transfer characteristics of swift cluster ions have attracted the attention of many researchers working on the analysis or processing of material surfaces, but the effects on living organisms remain unclear. We irradiated B. subtili...
Non-intrusive load monitoring (NILM) is a process of determining the operating states and the energy consumption of single electric devices using a single energy meter providing aggregate load measurements. Due to the large spread of power electronic...
The article is devoted to the theoretical problems of studying cathode lenses with two planes of symmetry. It is noted that the classical methods of studying conventional electron lenses are unsuitable for a detailed study of the focusing properties...
We demonstrate a simple but efficient way to optimize and improve the properties of laser-wakefield-accelerated electron beams (e beams) based on a controllable shock-induced density down-ramp injection that is achieved with an inserted tunable shock...
In the framework of this work, the surface properties of Cu-SiC composite material were studied when spreading micro- and nanoliter liquids. The Cu-SiC samples with a SiC content of 5 to 20 wt.% were fabricated by spark plasma sintering at temperatur...
of 4