To establish a collision model of wheat grains impacting a force plate with a piezoelectric sensor, and to investigate the influence of the elastic recovery coefficient on the sensor’s detection accuracy during the collision process, this study...
After filtration, filtered residue is recovered by a spoon, during which, the structure of the residue is destroyed, and the activity of the microorganism would be reduced. Thus, a more efficient recovery method of filtered residue is required. This...
Ultralight materials exhibit superelastic behavior depending on the selection, blending, and carbonization of the materials. Recently, ultimate low-density materials of 5 mg/cm3 or less have attracted attention for applications such as sensors, elect...
The paper presents preliminary studies of a new innovative surface treatment method—the process of roller burnishing of macro-irregularities of the surface. As part of the work, the possibility of plastic shaping of the surface macrostructure w...
The finite element error and adaptive analysis are implemented in finite element procedures to increase the reliability of numerical analyses. In this paper, the mesh-free error-recovery technique based on moving least squares (MLS) interpolation is...
Anaerobic digestate represents a valuable organic by-product, with one of the main challenges being its enhanced utilization. Pelletization offers potential benefits by improving the digestate’s storability, facilitating transport, and signific...
In the realm of Ceph distributed storage systems, ensuring swift and symmetrical data recovery during severe data corruption scenarios is pivotal for data reliability and system stability. This paper introduces an innovative FPGA-based Multi-Dimensio...
This study evaluates the crack performance of stone mastic asphalt (SMA) mixtures according to the performance of a modified asphalt binder, evaluated based on the asphalt performance grade (PG) and the elastic recovery of multiple stress creep and r...
Background and Objectives: Clinicians have been using elastic abdominal binder for stabilizing incision site after major abdominal surgery. However, the benefits of that practice have never been formally assessed. The aim of this study was to examine...
The purpose of the study was to measure the Brinell hardness (HB) of six wood species and evaluate the ability to recover the depth of the imprint (self-re-deformation). Straight-grain clear samples of ash, beech, alder, birch, iroko, and linden wood...
The COVID-19 pandemic disrupted traditional patterns of sport consumption, raising questions about whether fans would return to stadiums and how sensitive they would be to ticket prices in the recovery period. This study reconceptualizes ticket price...
To recover the filtered residues on a gel layer in a column, the method using the elasticity of the gel layer and flowing water in a cross-flow manner is proposed. Polymerized spherical gel (40 μm) was packed in a column to a set height of 0.7 cm....
The design of polymers that exhibit both good elasticity and self-healing properties is a highly challenging task. In spite of this, the literature reports highly stretchable self-healing polymers, but most of them exhibit slow elastic recovery behav...
The meshless displacement error-recovery parametric investigation in finite element method-based incompressible elastic analysis is presented in this study. It investigates key parameters such as interpolation schemes, patch configurations, dilation...
Contact noise, often arising from frictional vibrations in mechanical systems, significantly impacts performance and user experience. This study investigates the generation of contact noise due to the elastic recovery of surface asperities during sph...
We report optical and mechanical properties of hard aluminum magnesium boride films magnetron sputtered from a stoichiometric AlMgB14 ceramic target onto Corning® 1737 Glass and Si (100) wafers. High target sputtering rf-power and sufficiently sh...
Soft electronics based on various rubbers have lately been needed in many advanced applications such as soft robotics, wearable electronics, and remote health monitoring. The ability of a self-sensing material to be monitored in use provides a signif...
The displacement and stress-based error estimates in a posteriori error recovery of compressible and nearly-incompressible elastic finite element solutions is investigated in the present study. The errors in the finite element solutions, i.e., in dis...
In this study, we aimed to address the lack of systematic research on key collision dynamics parameters (elastic restitution coefficient) in the full mechanization of rapeseed operations, which hinders the development of precision agriculture. In thi...
The study develops the displacement error recovery method in a mesh free environment for the finite element solution employing the radial point interpolation (RPI) technique. The RPI technique uses the radial basis functions (RBF), along with polynom...
Error estimation and adaptive applications help to control the discretization errors in finite element analysis. The study implements the radial point interpolation (RPI)-based error-recovery approaches in finite element analysis. The displacement/pr...
In recent decades, the application of modified bitumens has experienced tremendous growth. However, due to the varying modification mechanism of different modifiers, the creep and recovery properties of modified bitumen have not been comprehensively...
The study of the viscoelastic properties of surfactants in Enhanced Oil Recovery (EOR) has gained significant attention due to the role of interface elasticity in improving oil recovery. Interfacial rheology has been demonstrated to be a valuable too...
In order to improve the basic pavement performance of high-elastic asphalt concrete filled in the expansion longitudinal joints of seamless bridges, rubber particles and polyester fibers were added to optimize the mix proportion of elastic asphalt co...
With the rapid development of planting techniques using plastic film mulching, the content of residual plastic film in soil increases year by year, which pollutes the soil and water, endangers the growth of crops and reduces the quality and yield of...
We hypothesize that the ability to recovery the depth of the indentation increases with increasing the hardness of the flooring material. The research was carried out for ten lignocellulosic flooring materials: merbau, oak, maple, red oak, laminated...
The assessment of fire effects in Aleppo pine forests is crucial for guiding the recovery of burnt areas. This study presents a methodology using UAV-LiDAR data to quantify malleability and elasticity in four burnt areas (1970, 1995, 2008 and 2015) t...
Objectives: Impression materials could be a source of cross-contamination due to the presence of microorganisms from blood and saliva inside the oral cavity. Nevertheless, routinely performed post-setting disinfection could compromise the dimensional...
Exploiting novel crosslinking chemistry, this study pioneers the use of waterborne polyurethane (WPU) to chemically crosslink porcine-derived gelatin, producing enhanced gelatin hydrogel films through a solvent-casting method. Our innovative approach...
Elastic recovery and viscoplastic stress relaxation occur in the interstand of hot rolling, impacting the evolutions of strip profile and residual stress, which are major concerns for obtaining high-quality flat products. A better understanding of th...
For microbial enhanced oil recovery (MEOR), different mechanisms have been introduced. In some of these papers, the phenomena and mechanisms related to biosurfactants produced by certain microorganisms were discussed, while others studied the direct...
The present study focuses on the compaction behavior of polymeric excipients during compression in comparison to nonpolymeric excipients and its consequences on commonly used Heckel analysis. Compression analysis at compaction pressures (CPs) from 50...
This study examines the influence of virgin polyethylene (vPE), recycled polyethylene (rPE), and Aerosil (A) on the performance of bitumen binders modified with partially devulcanized rubber (DVR). The experimental program included morphology analysi...
Aging has a detrimental impact on the interfacial interaction and bonding between asphalt-binder and aggregates, which influence ultimately on the performance of asphalt mixtures and pavements. Evaluation of the mechanical properties of the interface...
Coalbed methane development is constrained by reservoir characteristics including high gas adsorption, high salinity, and high closure pressure, which impose significant limitations on conventional polymer fracturing fluids regarding viscosity enhanc...
The aim of this paper is to extend knowledge on biobased poly(butylene furanoate)–block–poly (ethylene oxide) (PBF-b-PEO) copolymers’ performance by studying the effect of the PEO segment’s molecular weight on the microstructu...
Zr–Si–N films with atomic ratios of N/(Zr + Si) of 0.54–0.82 were fabricated through high-power impulse magnetron sputtering (HiPIMS)–radio-frequency magnetron sputtering (RFMS) cosputtering by applying an average HiPIMS power...
Elastomeric, conductive composite yarns have recently received attention around the opportunity for them to offer special protective fields. A straightforward approach for fabricating tri-component elastic-conductive composite yarns (t-ECCYs) contain...
Indentation experiments on differently oriented faces of monocrystalline copper were conducted to investigate the micro-deformation process at temperatures ranging from room temperature to 150 K. The morphologies and textures of the residual imprints...
In the present study, the capacity of two commercial NiTi and NiTiCu shape memory alloy (SMA) wires to develop work-generating (WG) and constrained-recovery (CR) shape memory effects (SMEs), as well as the capacity of a commercial NiTiFe super-elasti...
In this contribution, we explored the copolymerization of propylene with higher α-olefins, including 1-octene (C8) 1-dodecene (C12), 1-hexadecene (C16) and 1-eicosene (C20), by using a dimethyl pyridylamidohafnium catalyst. A series of copolyme...
This paper aims to estimate an unknown density of the data with measurement errors as a linear combination of functions from a dictionary. The main novelty is the proposal and investigation of the corrected sparse density estimator (CSDE). Inspired b...
This research delves into the complexities of backflow phenomena in finite-length and flat-walled fractures with elastic walls, specifically focusing on power-law fluids, whose shear-thinning behavior distinguishes them from Newtonian fluids. We mode...
A high performance ladder-like structured methacrylate siloxane hybrid material (LMSH) was fabricated via simple hydrolytic sol–gel reaction, followed by free-radical polymerization. A structurally ordered siloxane backbone, the ladder-like str...
This research focuses on cylindrical helical springs with circular cross-sections made from carbon steel (SH 0.82% C) and stainless steel (AISI 302). The transformation from a linear bar to a circular spiral involves numerous factors such as material...
In this study the effects of increased graphene nanosheet (GNS) concentration on variations in the structure and properties of electrospun GNS-filled poly(trimethylene terephthalate) (PTT/GNS) composite fiber, such as its morphologies, crystallizatio...
All rotating shafts, even in the absence of external load, deflect during rotation. The magnitude of the deflection depends upon the stiffness of the shaft, its supports and also upon the load level. In this paper, a complete study of the effect of s...
Metallic wire mesh has gained attention as a potential material for lightweight aircraft structures, e.g., a metallic frame of morphing wings, due to its customizable mechanical properties associated with cell structures. However, the relationship be...
This paper presents a measurement method for high-precision cutting edge radius of single point diamond tools using an atomic force microscope (AFM) and a reverse cutting edge artifact based on the edge reversal method. Reverse cutting edge artifact...
During the Development Phase of the U.S. Southwest Regional Partnership on Carbon Sequestration, supercritical CO2 was continuously injected into the deep oil-bearing Morrow B formation of the Farnsworth Unit in Texas for Enhanced Oil Recovery (EOR)....
of 14