A cost-effective, simple, and time-saving method to fabricate mono-dispersed periodic microsphere structures on substrates with patterned sites is very meaningful due to their significance on various biological studies. Herein, a simple and facile me...
High-calcium fly ash (HCFA), produced from the lignite combustion, has emerged as a global concern due to its fine particle size and adverse environmental impacts. This study presents the characteristics of dispersed microspheres from HCFA obtained u...
Using dodecyl acrylate as a raw material and 2-Cyanoprop-2-yl-dithiobenzoate as a chain transfer agent, poly(dodecyl acrylate) is synthesized by reversible addition–fragmentation chain transfer (RAFT) polymerization. Using poly(dodecyl acrylate...
The recycling of hazardous industrial waste into high-tech materials with desired properties is of considerable interest since it provides optimal alternatives for its final disposal. Coal fly ash, the major waste generated by coal-fired power plants...
Developing resource-efficient technologies for producing ceramic materials with specific properties and performance characteristics is one of the most important tasks in modern materials science. As natural resources face depletion, the use of anthro...
During the operation of structures, the components and materials from which they are made are exposed to various environmental, technological, and operational impacts. In this context, the use of a modified water-dispersion composition containing fin...
Optical whispering gallery mode microresonators with controllable parameters in the telecommunication range are demanded for diverse applications. Controlling group velocity dispersion (GVD) in microresonators is an important problem, as near-zero GV...
Herein, we report a photoinitiated reversible addition-fragmentation chain transfer (RAFT) dispersion copolymerization of methyl methacrylate (MMA) and methyl methacrylic (MAA) for the preparation of highly monodisperse carboxyl-functionalized polyme...
The removal of per- and polyfluoroalkyl substances (PFAS) from global aquatic environments is an emerging issue. However, little attention has been paid to addressing accumulated PFAS through their removal. This study demonstrates the encapsulation o...
A modified method based on in situ chemical reduction was developed to prepare mono-dispersed polystyrene/silver (PS/Ag) composite microspheres. In this approach; mono-dispersed PS microspheres were synthesized through dispersion polymerization using...
In this work, C@Fe3O4 magnetic microspheres were designed and prepared by a novel strategy, and the microwave absorption properties of the materials were investigated. Four kinds of monodisperse P(MAA/St) microspheres with different carboxyl content...
In this study, a series of poly(lactic-co-glycolic acid) (PLGA) microspheres with different particle sizes for arterial embolization surgery were prepared. The polydopamine (PDA) and polydopamine/polyethyleneimine (PDA/PEI) were respectively coated o...
The spray drying technique is suitable for different kinds of liquid dispersions and can be easily optimized to produce solid particles with tailored properties. The spray drying technique is a complex process. As an example, it is difficult to track...
Microfluidic granulation technology enables high-quality production of energy-containing microspheres, significantly enhancing both performance and safety. Although microfluidic methods allow control over microsphere particle size, the adjustment ran...
Control of the porous structure and particle size is essential for improving the properties of polysilsesquioxane (PSQ) microspheres. Herein, using the strategy combining inverse suspension polymerization, two-step sol–gel- and polymerization-i...
Nanosized titanium oxide (TiO2) material is a promising photocatalyst for the degradation of organic pollutants, whereas the difficulty of its recycling hinders its practical application. Herein, we reported the preparation of a novel titanium oxide/...
Multicomponent polymer particles with specific morphology are promising materials exhibiting novel functionality which cannot be obtained with single-component polymer particles. Particularly, the preparation of such kinds of polymer particles involv...
29 September 2014
The purpose of this study was to develop novel lidocaine microspheres. Microspheres were prepared by the oil-in-water (o/w) emulsion technique using poly(d,l-lactide-co-glycolide acid) (PLGA) for the controlled delivery of lidocaine. The average dia...
In this study, we present an in situ microfluidic system to precisely control highly porous polycaprolactone microspheres as tissue templates for tissue engineering. The porosity of the microspheres was controlled by adjusting the flow rates of the p...
Ceramic and vitreous materials can be functionalized to exhibit biocidal activity. This research evaluates the biocidal properties of silver-modified vitreous microspheres designed to be included in water endpoints and siphons to prevent nosocomial d...
Structural-colored fabrics have been attracting much attention due to their eco-friendliness, dyelessness, and anti-fading properties. Monodisperse microspheres of metal, metal oxide, and semiconductors are promising materials for creating photonic c...
Microspheres loaded with carnosic acid (CA) as an active ingredient which was extracted from various species of Salvia L., were prepared by a spray drying technology. The matrix of the microspheres consisted of 85% deacetylated chitosan (average MW 5...
As a kind of biomass resource, waste office paper can be used as a carbon precursor to prepare carbon materials. In this work, carbon microspheres with regular shape, uniform particle size and high carbon content were successfully prepared from waste...
Composites suitable for rotational molding technology based on poly(ε-caprolactone) (PCL) and filled with hollow glass microspheres (HGM) or functionalized hollow glass microspheres (HGMf) were prepared via melt-compounding. The functionaliza...
Radioembolization shows great potential as a treatment for intermediate- and advanced-stage liver cancer. However, the choices of radioembolic agents are currently limited, and hence the treatment is relatively costly compared to other approaches. In...
Due to the high formation temperature of high-temperature reservoirs, ordinary polyacrylamide microspheres cannot meet the requirements for temperature resistance. To address the challenge of deep profile control in high-temperature reservoirs, we pr...
Based on the specific binding of sulfonic acid groups to melamine, β-agonists and other compounds, Fe3O4 nano-magnetic beads were coated with polystyrene using an improved micro-suspension emulsion polymerization method, thus forming core–...
Gigaporous poly(styrene-divinyl benzene) microspheres made via the surfactant reverse micelles swelling method had a controllable pore size of 100–500 nm. These microspheres had unique advantages in biomacromolecule separation and enzymes immobilizat...
This study demonstrates the utility of the newly developed self-assembly-induced gelation technique for the synthesis of porous collagen/hydroxyapatite (HA) composite microspheres with a nanofibrous structure. This new approach can produce microspher...
ZnO hollow microspheres with a diameter of approximately 1.4 μm were successfully synthesized by a facile one-step chemical precipitation method using trisodium citrate dihydrate as a morphology control agent. The ZnO hollow microspheres consisted...
Silica aerogel microspheres show great potential in various fields as fillings in different materials. It is important to diversify and optimize the fabrication methodology for silica aerogel microspheres (SAMS). This paper presents an eco-friendly s...
Polymer microspheres are important for a variety of applications, such as ion exchange chromatography, catalyst supports, absorbents, etc. Synthesis of large microspheres can be challenging, because they cannot be obtained easily via classic emulsion...
In order to effectively raise both utilization rate and additional value of fly ash, X-Ray diffraction (XRD), scanning electron microscope (SEM) and energy-dispersive X-Ray spectrometer (EDS) were used to investigate the morphology, and chemical and...
Polyurethane coatings containing copper(II) L-tyrosine and glass microspheres were laser irradiated and underwent electroless metallization. Various sizes of glass microspheres were incorporated into the polyurethane coating matrix in order to examin...
Introduction: Transarterial radioembolization (TARE) has been proven as an effective treatment for unresectable liver tumor. In this study, neutron activated, 153Sm-labeled microspheres were developed as an alternative to 90Y-labeled microspheres for...
As a non-halogenated dispersed solvent, ethyl acetate has been most commonly used for the manufacturing of poly-d,l-lactide-co-glycolide (PLGA) microspheres. However, ethyl acetate-based microencapsulation processes face several limitations. This stu...
The hydroconversion of asphaltenes into light hydrocarbons catalyzed by supported and free-standing non-noble metal nanoparticles was studied. The activity of Ni or Co immobilized on microspherical oxide carriers and Co nanoparticles dispersed in a h...
Colloidal microspheres could be used as raw materials to construct the photonic crystal modification layers on wood surfaces, and the wood would produce gorgeous structural color effect. The diameter, monodispersity and self-assembly of colloidal mic...
The magnetic remanence of silica microspheres with a low concentration of embedded cobalt ferrite nanoparticles is studied after demagnetization and remagnetization treatments. When the microspheres are dispersed in a liquid, alternating current (AC)...
A highly sensitive NH3 gas sensor based on micrometer-sized polyaniline (PANI) spheres was successfully fabricated. The PANI microspheres were prepared via a facile in situ chemical oxidation polymerization in a polystyrene microsphere dispersion sol...
Size-controlled azoxystrobin-poly (lactic acid) microspheres (MS) were prepared by an oil/water emulsion solvent evaporation approach. The hydrated mean particle sizes of the MS1, MS2, and MS3 aqueous dispersions were 130.9 nm, 353.4 nm, and 3078.0 n...
Poly(3-hydroxybutyric acid)-based microspheres of two types, with and without macropores, were prepared; their morphology and particle size were evaluated. These microspheres were entrapped as disperse fillers into the bulk of macroporous cryogels ba...
The objective of this study was to develop three-dimensional collagen/gelatin/hydroxyethyl cellulose composites in combination with gelatin or collagen-gelatin loaded microspheres. Microspheres were prepared by an emulsification/crosslinking method....
This research is aimed at studying the properties of polymer anticorrosion coatings based on ED-20 resin widely used in practice and industrial wastes. In this work, three basic types of nanoscale nanofillers were chosen: dispersed particles—mi...
Microspheres have been proposed for different medical applications, such as the delivery of therapeutic proteins. The first step, before evaluating the functionality of a protein delivery system, is to evaluate their biological safety. In this work,...
The development of Ir-based catalyst with high efficiency for oxygen evolution reaction (OER) in acidic conditions is of great significance to the development of clean energy, but it still remains a significant challenge for shape controlled synthesi...
Zinc cobalt oxide-zinc hydroxide (ZnCo2O4-Zn(OH)2) microspheres were successfully fabricated on carbon cloth via a sample hydrothermal method. The surface morphology of these microspheres and their efficacy in degrading methyl violet were further mod...
Large-size, superparamagnetic, and highly magnetic Fe3O4@PDA core–shell submicrosphere-supported nano-palladium catalysts were prepared in this study. Dopamine was encapsulated on the surface of Fe3O4 particles via self-polymerization and then...
A one-step swelling and polymerization technique was used in the synthesis of porous glycidyl methacrylate (GMA) and ethylene glycol dimethacrylate (EGDMA) monodisperse polymeric microspheres. The polystyrene (PS) seed obtained in the dispersion poly...
Nano-boron, as a potential high-energy additive due to its high calorific value, is widely studied in propellants, explosives, and thermites. However, the unexpected agglomeration of surface oxidation hinders its further application, especially in th...
of 5