Condensation polymerization of 5-aminoisophthalic acid methyl ester 1 bearing a N-tri(ethylene glycol) methyl ester (TEG) chain as an AB2 monomer was conducted and the properties of the resulting hyperbranched polyamides (HBPA) were investigated. Whe...
This short review article summarizes recent reports on using controlled radical polymerization (CRP) of inimers (compounds containing initiating group and vinyl group in one molecule) or transmers (compounds containing chain transfer group and vinyl...
Under pressure of 1–100 GPa, unsaturated organic molecules tend to form covalent bond to each other for a negative enthalpy change, which often produces polymeric materials with extended carbon skeleton. The polymerization reactions typically h...
Initiated chemical vapor deposition is a unique solvent-free and completely dry vapor-phase deposition technique used to synthesize organic polymer films. In this process, an activated initiator, monomer, and carrier gas are introduced into the react...
Condensed tannins (CTs) form insoluble complexes with proteins and are able to protect them from degradation, which could lead to rumen bypass proteins. Depending on their degrees of polymerization (DP) and molecular weights, CT fractions vary in the...
In this paper, we propose a simple one-pot methodology for proceeding from atom transfer reaction-induced conventional free radical polymerization (AT-FRP) to atom transfer self-condensing vinyl polymerization (AT-SCVP) through manipulation of the ca...
The sol–gel polymerization of alkoxysilanes is a convenient and widely used method for the synthesis of silicon polymers and silicon–organic composites. The development of new sol–gel precursors is very important for obtaining new t...
The free-radical homopolymerization of 1,3-bis(N,N,N-trimethylammonium)-2-propylmethacrylate dichloride (di-M) and 1,3-bis(N,N,N-trimethylammonium)-2-propylacrylate dichloride (di-A) in aqueous solution yields cationic polyelectrolytes (PEL) with the...
It is known that π-conjugated polymers can be easily synthesized using monomers which possess metals or halogen atoms as well as transition-metal catalysts. However, in the polymer materials synthesized by such reactions, small amounts of halogens...
The oxidative condensation of benzidine has been carried out in acetic acid media using potassium peroxydisulfate as the oxidizing agent. Using different monomer–oxidant molar ratios, benzidine dimer, trimer, and polymer have been synthesized f...
Anthelmintic resistance in gastrointestinal nematodes produces substantial challenges to agriculture, and new strategies for nematode control in livestock animals are called for. Natural compounds, including tannins, with proven anthelmintic activity...
Engineering thermoplastics, such as poly(arylene ether sulfone), are more often synthesized using F-containing monomers rather than Cl-containing monomers because the F atom is considered more electronegative than Cl, leading to a better condensation...
The impression materials utilized today in dental medicine offer a good reproducibility and are easily accepted by patients. However, because they are polymer-based, they have issues regarding their dimensional stability. In this respect, the present...
We synthesized a series of copolybenzamides (PBA) through chain-growth condensation polymerization (CGCP) of 4-(octylamino)benzoate (M4OB) and methyl 3-(4-(octyloxy)benzylamino) benzoate (M3OOB) co-monomers. Well-defined copolybenzamides with close t...
Synthesis of uniform and stable electrochromic films on a conductive layer is one of the effective ways to construct high-performance electrochromic devices. The development of more convenient and feasible polymer film preparation technology is impor...
Poly(ethylene succinate) (PES) is one of the most promising biodegradable and biocompatible polyesters and is widely used in different biomedical applications. However, little information is available on its solubility and precipitation properties, d...
Structure and reversibility of cross-link junctions play pivotal roles in determining the nature of thermoreversible gelation and dynamic mechanical properties of the produced polymer networks. We attempt to theoretically explore new types of sol&nda...
Polymeric amines are intensively studied due to various valuable properties. This study describes the synthesis of new polymeric amines and ampholytes by the reaction of poly(acryloyl chloride) with trimethylene-based polyamines containing one second...
Tris(pentafluorophenyl)borane (TPFPB) is a unique Lewis acid that catalyzes the condensation between hydrosilanes (Si-H) and alkoxysilanes (Si-OR), leading to the formation of siloxane bonds (Si-OSi) with the release of hydrocarbon (R-H) as a byprodu...
In this review paper, we present a comprehensive summary of the different organic solar cell (OSC) families. Pure and doped conjugated polymers are described. The band structure, electronic properties, and charge separation process in conjugated poly...
Anion exchange membranes (AEMs) are vital for electrochemical energy devices such as alkaline fuel cells and water electrolyzers, enabling the use of non-precious metal catalysts despite challenges from alkaline degradation. Hyperbranched polymers (h...
To monitor the release of fluorinated drugs from polymeric carriers, a novel 19F MRI enzyme-responsive contrast agent was developed and tested. This contrast agent was prepared by conjugation of 5-fluorouracil (5-FU) to hyperbranched poly(N,N-dimethy...
Sterically hindered (S)-1,1′-binaphthyl-2,2′-diol had been successfully copolymerized with 4,4′-sulfonyldiphenol and 4,4′-difluorobenzophenone to yield fibrous poly(arylene ether ketone)s (PAEKs) containing various amounts of...
The origin of life on earth requires the synthesis of protobiopolymers in realistic geologic environments along strictly abiotic pathways that rely on inorganic phases (such as minerals) instead of cellular machinery to promote condensation. One such...
Naturally occurring Fe(III) films with rainbow reflection iridescence have been observed floating on the water surface of various spots covered with shallow water (e.g., edges of wetlands and creeks, standing water over soils). This natural phenomeno...
Catechin is a plant polyphenol with valuable antioxidant and health-promoting properties. Polymerization is one way to stabilize flavonoids and may cause changes in their specific properties. The aim of this study is to obtain a polymeric complex cat...
This study focuses on modeling and dynamic identification of a reflux condenser in a batch reactor system. The model uses data from real industrial conditions, along with the Volterra series and Genocchi orthogonal polynomials, to capture the condens...
This article presents the effect of the addition of condensed tannins, used as a reticulation agent, on the polymerization of furfuryl alcohol during wood furfurylation, as well as the effect of these condensed tannins on the thermal stability of mod...
Polymeric liquid crystals (PLCs) have emerged as one of the most frenetic and interdisciplinary areas of materials science, found at the crossroads of soft condensed matter, chemistry, physics, and engineering [...]
Different kinds of additive and reactive flame retardants containing phosphorus are increasingly successful as halogen-free alternatives for various polymeric materials and applications. Phosphorus can act in the condensed phase by enhancing charring...
The Drosophila PRC1 complex regulates gene expression by modifying histone proteins and chromatin architecture. Two PRC1 subunits, PSC and Ph, are most implicated in chromatin architecture. In vitro, PRC1 compacts chromatin and inhibits transcription...
A new polymeric construct is proposed as a starting material for a liver-targeted delivery system in the present communication. The polymeric material has been designed to be sensitive to pH variations and potentially loaded with hydrophobic antitumo...
The structures of condensed tannins isolated from two mangrove species, Kandelia candel and Rhizophora mangle, were characterized by 13C nuclear magnetic resonance (NMR) spectroscopy and matrix assisted laser desorption/ionization time-of-flight mass...
Using acid-catalyzed degradation in the presence of cysteamine, the condensed tannins from Lithocarpus glaber leaves were characterized, following thiolysis, by means of reversed-phase HPLC, 13C-NMR and matrix-assisted laser desorption/ionization tim...
The aim of this research work was to investigate the influence of parameters such as particle size, mass/solvent ratio, temperature and spray drying on the tannin extraction process in order to develop cost-effective methods with better environmental...
We prepared network polysaccharide nanoscopic hydrogels by crosslinking water-soluble chitosan (WSCS) with a carboxylate-terminated maltooligosaccharide crosslinker via condensation. In this study, the enzymatic elongation of amylose chains on chitos...
Shape is an essential property of polymeric particles. Herein, we propose a simple method to synthesize polymeric particles with a well-controlled concave shape. Our method takes advantage of the powerful seeded emulsion polymerization strategy with...
The depletion of fossil fuel resources has prompted the scientific community to find renewable alternatives for the production of energy and chemicals. The products of the aldol condensation between bio-based furfural and acetone have been individuat...
Setting time and mechanical properties are key metrics needed to assess the properties of municipal solid waste incineration (MSWI) bottom ash alkali-activated samples. This study investigated the solidification law, polymerization, and strength deve...
Access to pure water is a very topical issue today. Desalination represents a promising way of obtaining drinking water in areas of shortage. Currently, efforts are being made to replace the metal components of existing desalination units due to the...
CM-Str (4-(Chloromethyl)styrene) was used as a useful starting material for the construction of a series of functional monomers. Substitution of the chlorine to the corresponding azide was performed, and the reduction of the azide proceeded smoothly...
Synthesis and characterization of resorcinol-acetone copolymer is described. The polymer was prepared by trifluoroacetic acid-catalyzed polymerization of resorcinol with acetone. According to the 1H-NMR, 13C-NMR, and MALDI-TOF Mass spectra data, the...
Two-dimensional covalent organic frameworks (2D-COFs) have been of increasing interest in the past decade due to their porous structures that ideally can be highly ordered. One of the most common routes to these polymers relies on Schiff-base chemist...
(1) Background: most premium red wines are rich in tannins but the effect of chitosan on these macromolecules is unknown. In this work, the effect of a treatment with 0.5 g/L of chitosan on red wines, W, enriched with condensed tannins, CT, ellagitan...
Hyperbranched polycaprolactone with controlled structure was synthesized by reversible addition-fragmentation chain transfer radical ring-opening polymerization along with self-condensed vinyl polymerization (SCVP) of 2-methylene-1,3-dioxepane (MDO)....
In recent decades, quantum chemical calculations (QCC) have increased in accuracy, not only providing the ranking of chemical reactivities and energy barriers (e.g., for optimal selectivities) but also delivering more reliable equilibrium and (intrin...
Recent years have seen an increase in research focusing on the amelioration of apple pomace waste for use in the food and nutraceutical industries. Much of this work has concentrated on the characterisation of the polyphenol composition of apple poma...
Food waste has a significant social impact but can be revalued as a source of bioactive compounds, such as condensed tannins. This abundant biomass, corresponding to a polymeric antioxidant, must be depolymerized to become bioavailable. Previous stud...
Accurate positioning of luminescent materials at the microscale is essential for the further development of diverse application fields including optoelectronics, energy, biotechnology and anti-counterfeiting. In this respect, inkjet printing has rece...
This study focuses on the competition reaction rules of a system containing resorcinol (as a tannin model compound) and dimethylol urea (as a urea–formaldehyde resin model compound) under various alkaline and acidic environments. The aim is to...
of 7