180 Results Found

Silicone rubbers are a good choice for shielding materials because of having elastic and attenuating properties as well as cost-effectiveness. Thus, the aim of this study was to prepare ground-breaking silicone rubber samples by adding WO3-nanopartic...

In the present work, an experimental study is performed to study the radiation shielding characteristics of SrTiO3 (STO) perovskite ceramic added with different amounts (x = 0, 2, 5, and 10%) of tungsten trioxide nanoparticles (WO3 NPs). The four cer...

Thin films of tungsten trioxide were deposited on quartz substrates by RF magnetron sputtering. Different annealing temperatures in the range from 423 to 973 K were used under ambient atmosphere. The influence of the annealing temperature on the stru...

The decoration of noble metal nanoparticles (NPs) on the surface of metal oxide semiconductors to enhance material characteristics and gas-sensing performance has recently attracted increasing attention from researchers worldwide. Here, we have synth...

This study investigates the chemical and structural modifications of vertically aligned tungsten disulfide–tungsten trioxide (WS2-WO3) nanosheets decorated with silver nanoparticles (Ag(NPs)) under nitrogen plasma conditions. The synthesized ve...

Fe3O4/CdWO4 and Fe3O4/CdWO4/PrVO4 magnetic nanoparticles were prepared at different molar ratios of PrVO4 to previous layers (Fe3O4/CdWO4) via the co-precipitation method assisted by a sonochemical procedure, in order to investigate the photocatalyti...

The surface of ZnWO4 nanorods was decorated with Cu2O nanoparticles (Cu2O/ZnWO4) prepared through a precipitation method. The Cu2O nanoparticles were tightly deposited on the ZnWO4 surface and had average diameters of 20 nm. The nanoparticles not onl...

This study explores the influence of solution concentration, specifically that of water and ethylene glycol mixtures, on the optical and supercapacitive properties of cobalt tungstate (CoWO4) nanoparticles. CoWO4 nanoparticles were synthesized using...

Magnetic Fe3O4/ZnWO4 and Fe3O4/ZnWO4/CeVO4 nanoparticles with different molar ratios of CeVO4 to other inorganic components were synthesized through co-precipitation with a sonochemical-assisted method. X-ray diffraction, energy dispersive X-ray spec...

Gelatin films are very versatile materials whose properties can be tuned through functionalization with different systems. This work investigates the influence of WO3 nanoparticles on the swelling, barrier, mechanical, and photochromic properties of...

The current research introduces a cost-effective thermal coating process using a tinning surfacing technique to synthesize WO3 nanoparticle-reinforced Sn-20Bi (S20B) alloy coating on low-carbon steel (LCS). A ball-milling machine was used for mechani...

WO3 is a versatile material occurring in many polymorphs, and is used in nanostructured form in many applications, including photocatalysis, gas sensing, and energy storage. We investigated the thermal evolution of cubic-phase nanocrystals with a siz...

Tungsten trioxide (WO3) nanowires decorated with iridium oxide nanoparticles (WO3-IrO2) have been studied as candidate towards low NO2 concentrations gas detection. Furthermore, reducing gases such ammonia vapors and hydrogen have been also studied....

The radiation shielding abilities of waste marbles with different concentrations of WO3 (tungsten oxide) nanoparticles were investigated. Four marbles were prepared with 0, 0.05, 0.1, and 0.2 WO3 nanoparticles. The study aims to investigate the effec...

Photoelectrochemically active WO3 films were fabricated by electrodeposition from an acidic (pH 2), hydrogen-peroxide-containing electrolyte at −0.5 V vs. SCE. WO3-TiO2 composites were then synthesized under the same conditions, but with 0.2 g/...

In this work, we report the application of Au/WO3 composite as a photocatalyst for the degradation of dyes under solar light irradiation. Au/WO3 nanocomposites were synthesized using an acid precipitation method followed by an impregnation/reduction...

The electrochemical water splitting method is widely regarded as an efficient and sustainable approach for producing high-purity hydrogen in an environmentally friendly manner. Cost-effective and efficient electrocatalysts are essential for augmentin...

Nowadays, metal oxide semiconductor gas sensors have diverse applications ranging from human health to smart agriculture with the development of Internet of Things (IoT) technologies. However, high operating temperatures and an unsatisfactory detecti...

Electrochromic devices are increasing its interest in the last decades due to the wide range of applications, from smart windows to biosensors or from smart labels to super-capacitors. So, the development of simple and cost-effective production techn...

Methane detection is extremely difficult, especially at low temperatures, due to its high chemical stability. Here, WO3 nanosheets loaded with SnO2 nanoparticles with a particle size of about 2 nm were prepared by simple impregnation and subsequent c...

The rising prevalence of antibiotic-resistance is currently a grave issue; hence, novel antimicrobial agents are being explored and developed to address infections resulting from multiple drug-resistant pathogens. Biogenic CuO, ZnO, and WO3 nanoparti...

In this study, Cu and Cu2O hybrid nanoparticles were synthesized onto the WO3 nanoflake film using a one-step electrodeposition method. The critical advance is the use of a heterojunction consisting of WO3 flakes and Cu2O as an innovative stack desig...

This report addresses a way to reduce the usage of highly toxic lead in diagnostic X-ray shielding by developing a cost-effective, eco-friendly nano-tungsten trioxide (WO3) epoxy composite for low-weight aprons. Zinc (Zn)-doped WO3 nanoparticles of 2...

Localized surface plasmon resonance (LSPR) gas sensors are gaining increasing importance due to their unique tuneable functional properties. Au-WO3−x nanocomposite coatings, in particular, can be outstandingly sensitive to many different gases....

Magnetic nanoparticles are interesting tools for biomedicine. Before application, critical prerequisites have to be fulfilled. An important issue is the contact and interaction with biological barriers such as the blood-placenta barrier. In order to...

WO3/Ag/TiO2 composite photoelectrodes were formed via the high-temperature calcination of a WO3 film, followed by the sputtering of a very thin silver film and deposition of an overlayer of commercial TiO2 nanoparticles. These synthetic photoanodes w...

In this study, the potential of zinc oxide (ZnO), tungsten oxide (WO3), and their composites (ZnO–WO3) as photoanodes for photoelectrochemical (PEC) water splitting was investigated. ZnO–WO3 nanocomposites (NCs) were deposited on fluorine...

This work investigated the optical characteristics of BaWO4 nanoparticles that were produced through direct mechanochemical synthesis at varying speeds and times. This research expands upon our previous study. We demonstrated that the mechanochemical...

This paper reports the synthesis of a new nitrogen-doped porous bio-graphene (NPBG) with a specific biomorphic structure, using Pistacia lentiscus as a natural carbon source containing nitrogen that also acts as a bio-template. The obtained NPBG demo...

N-containing gaseous compounds, such as trimethylamine (TMA), triethylamine (TEA), ammonia (NH3), nitrogen monoxide (NO), and nitrogen dioxide (NO2) exude irritating odors and are harmful to the human respiratory system at high concentrations. In thi...

High-internal-phase water-in-oil (W/O) emulsions generated in situ have garnered considerable attention as novel profile control systems. However, conventional emulsifiers are unreactive and poorly dispersed in water, necessitating large dosages and...

This manuscript demonstrates the design, modification and initial investigation of a rotary furnace for the manufacturing of inorganic fullerene WS2 nanoparticles. Different preparation methods starting with various precursors have been investigated,...

Ammonia is one of the common inorganic pollutants in surface waters. It can come from a wide range of sources through the discharge of wastewater (industry, agriculture, and municipal waters). Catalytic ozonation reaction can efficiently remove ammon...

Detection, monitoring, and analysis of ethanol are important in various fields such as health care, food industries, and safety control. In this study, we report that a solid electrolyte gas sensor based on a proton-conducting membrane is promising f...

Critical to boosting photoelectrochemical (PEC) performance is improving visible light absorption, accelerating carrier separation, and reducing electron–hole pair recombination. In this investigation, the PVD/RF method was employed to fabricat...

This study aimed to prepare silicone rubber composites with heavy metal oxide nanoparticles for gamma ray shielding applications. Different heavy metal oxide nanoparticles were incorporated into the silicone rubber matrix, and the prepared composites...

A two-step procedure was implemented to obtain tungsten oxide nanowires (WO3) doped with cobalt or silver oxide nanoparticles from metal-organic precursors, W(CO)6, Co(acac)2 and Ag(acac)2. In the first step, nanowires were grown at 400 °C using an a...

The study investigates the surface morphology of polystyrene (PS) thin films, which were crafted by drying a cast emulsion layer on a microscope glass slide. A water-in-oil (w/o) emulsion was previously formulated by dispersing a small quantity of wa...

Inorganic nanoparticles (NPs) have emerged as promising tools in biomedical applications, owing to their inherent physicochemical properties and their ease of functionalization. In all potential applications, the surface functionalization strategy is...

Based on the characteristics of charge reversal around the isoelectric point (pI) of amphoteric starch-containing anionic and cationic groups, amphoteric cassava starch nanoparticles (CA-CANPs) are prepared by a W/O microemulsion crosslinking method...

The effect of scintillator particle size on high-resolution X-ray imaging was studied using zinc tungstate (ZnWO4) particles. The ZnWO4 particles were fabricated through a solid-state reaction between zinc oxide and tungsten oxide at various temperat...

We report a facile synthesis of β-SnWO4 nanoparticles via a microwave heat treatment using SnCl2 and H2WO4 in the presence of tamarind seed powder. An X-ray diffraction analysis confirmed a crystalline nature revealing a cubic structure of β-SnWO4 na...

Hydrogen gas is a promising, clean, and highly efficient energy source. However, to use combustible H2 gas safety, high-performance and safe gas leakage sensors are required. In this study, transparent and flexible platinum-catalyst-loaded tungsten t...

CaWO4 nanoparticles were obtained by facile mechanochemical synthesis at room temperature, applying two different milling speeds. Additionally, a solid-state reaction was employed to assess the phase composition, structural, and optical characteristi...

Tungsten oxide-based bulk and nanocrystalline materials are widely used as photocatalytic and photo- and electrochromic materials, as well as materials for biomedical applications. In our work, we focused our attention on the effect of sodium cations...

The practical adoption of surface-enhanced Raman scattering (SERS) technology is often hampered by the high cost, complex fabrication, and poor reproducibility of conventional substrates, which typically rely on noble metals or inefficient semiconduc...

Tungsten trioxide (WO3) is well-known as one of the most promising chromogenic compounds. It has a drastic change of coloration induced from different external stimuli and so its applications are developed as gas sensors, electrochromic panels or pho...

Tungsten oxide thin films with different thicknesses, crystallinity and morphology were synthesized by e-beam deposition followed by thermal treatment and acid boiling. The films with different surface morphologies were coated with gold nanoparticles...

This research study attempts to prove the concept of the applicability of hyperthermia to treating the lysozyme amyloid fibrils (LAFs)’s self-assembled fibrillary aggregates by a feedback-modulated temperature controller ranging from 26 °C...

Microstructural, topology, inner morphology, and gas-sensitivity of mixed xWO3(1-x)Y2O3 nanoparticles (x = 1, 0.95, 0.9, 0.85, 0.8) thick-film semiconductor gas sensors were studied. The surface topography and inner morphological properties of the mi...