Selective oxidation of benzyl alcohol to benzaldehyde was carried out with MoO2 nanoparticles (MoO2 NPs). MoO2 NPs were synthesized by two different approaches and characterized by several techniques. The synthesis was done by a hydrothermal procedur...
This work focused on the application of the effective medium theory to describe the extinction coefficient (Qext) in molybdenum trioxide (MoO3) doped with different kinds of plasmonic nanoparticles, such as silver (Ag), gold (Au), and copper (Cu). Us...
The aim of this research is studying the tribological performance of MoO3, MoS2, WS2 and WC nanoparticles as additives of PAO4. Pure sliding tribological tests were performed at 120 °C, finding outstanding friction and wear reductions in comparis...
The molybdenum oxide (MoO3) and MoO3@SiO2 nanoparticles were successfully prepared using the chemical bath deposition (CBD) method. The photocatalytic activities of molybdenum oxide (MoO3), SiO2, and MoO3@SiO2 nanoparticles composite have shown a syn...
In this study, the advanced chemical vapor transport (CVT) method in combination with the quenching effect is introduced for creating molybdenum oxide nanoparticle arrays, composed of the hierarchical structure of fine nanoparticles (NPs), which are...
Hydrogen sulfide (H2S) detection is extremely necessary due to its hazardous nature. Thus, the design of novel sensors to detect H2S gas at low temperatures is highly desirable. In this study, a series of nanocomposites based on MoS2 octahedrons and...
One of the most sensible, economical, and ecologically friendly methods for treating wastewater is photocatalytic treatment. The most widely used and easily accessible photocatalyst for wastewater treatment is zinc oxide (ZnO). This study used laser...
A metal oxide-based interconnecting and window layer consisting of a molybdenum oxide (MoO3)/Zn-doped In2O3 (IZO) bilayer was investigated in efficient solution-processed perovskite/n-Si monolithic tandem solar cells using formamidinium cesium lead t...
TiO2 nanoparticles containing 0.0, 1.0, 5.0, and 10.0 wt.% Mo were prepared by a reverse micelle template assisted sol–gel method allowing the dispersion of Mo atoms in the TiO2 matrix. Their textural and surface properties were characterized b...
Developing high-efficiency and stable visible-light-driven (VLD) photocatalysts for removal of toxic antibiotics is still a huge challenge at present. Herein, a novel CdS/Bi2MoO6 heterojunction with CdS nanoparticles decorated Bi2MoO6 microspheres ha...
To reduce surface contamination and increase battery life, MoO3 nanoparticles were coated with a high-voltage (5 V) LiNi0.5Mn1.5O4 cathode material by in-situ method during the high-temperature annealing process. To avoid charging by more than 5 V, w...
Tribochemically produced triboproducts are becoming increasingly important in tribosystems and serve to improve system performance by preventing friction or wear. Diamond-like carbon (DLC) is chemically stable, which features a trade-off with tribolo...
The present study investigated iron molybdate (Fe2(MoO4)3), synthesized via a simple method, as a nanosorbent for methylene blue (MB) dye removal from aqueous solutions. Investigations of the effects of several parameters like contact time, adsorbent...
In this paper, the bilayer polymer-dispersed liquid crystals possessing a PDLC-PVA-PDLC structure were prepared by integrating two monolayer PDLCs. The effect of the polymer mesh size on the electro–optical properties of a bilayer PDLC was inve...
Ammonia borane (AB) is recognized as a highly promising material for hydrogen storage owing to its exceptional safety and high hydrogen density, enabling controllable hydrogen release at room temperature through catalytic hydrolysis. The development...
The photocatalytic hydrogen evolution reaction (HER) by water splitting has been studied, using catalysts based on crystalline TiO2 nanowires (TiO2NWs), which were synthesized by a hydrothermal procedure. This nanomaterial was subsequently modified b...
Hard machining has gained much attention to be an alternative solution for many traditional finish grinding operations due to high productivity, ease to adapt to complex part contours, the elimination of cutting fluids, good surface quality, and the...
A facile single-step wet chemical synthesis of a transition-metal-doped molybdate derivative was achieved via an Ocimum tenuiflorum extract-mediated green approach. The Synthesized nanomaterials of doped molybdate were characterized by optical and ot...
The excellent performance of semiconductor nanocrystals as sensitizers for photothermal therapy (PTT) has attracted the attention of many researchers; however, they are hindered by limited bandwidth and complex synthesis. To overcome these limitation...
Nanostructured β-CoMoO4 catalysts have been prepared via the thermal decomposition of an oxalate precursor. The catalyst was characterized by infrared spectroscopy (FTIR), X-ray diffraction (XRD), Brunauer-Emmett-Teller method (BET), energy dispersiv...
The tribological performances of the SiO2/MoS2 hybrids as lubricant additives were explored by a reciprocating ball-on-flat tribometer for AZ31 magnesium alloy/AISI 52100 bearing steel pairs. The results demonstrated that the introduction of SiO2/MoS...
One of the hugely focused areas of research for addressing the world’s energy and environmental challenges is electrochemical water oxidation. Morphological modulation of nanomaterials is essential for producing efficient electrocatalysts to ac...
Structural, optical and electrical properties of Al+MoO3 and Au+MoO3 thin films prepared by simultaneous magnetron sputtering deposition were investigated. The influence of MoO3 sputtering power on the Al and Au nanoparticle formation and spatial dis...
A nanocomposite of multi-walled carbon nanotubes (MWCNTs) decorated with molybdenum dioxide (MoO2) nanoparticles is fabricated through the reduction of phosphomolybdic acid hydrate on functionalized MWCNTs in a hydrogen–argon (10%) atmosphere i...
Bi2MoO6 with a tunable morphology was synthesized by a facile hydrothermal route using different surfactants, including nanosheet-assembled microspheres, smooth microspheres, nanoparticle aggregates and nanoparticles. The morphology, crystal structur...
MoS2/TiO2 nanostructures made of MoS2 nanoparticles covering TiO2 nanosheets have been synthesized, either via ex situ or in situ approaches. The morphology and structure of the MoS2/TiO2 hybrid nanostructures have been investigated and imaged by mea...
This work examined the influence of dual incorporation of MoO2 and SiO2 on the corrosion behavior of pure titanium treated via plasma electrolytic oxidation (PEO). To achieve this purpose, pure titanium substrate was treated via PEO in an alkaline-mo...
MXene has emerged as a highly promising two-dimensional (2D) layered material with inherent advantages as an electrode material, such as a high electrical conductivity and spacious layer distances conducive to efficient ion transport. Despite these m...
MoO2-Fe2O3 nanoparticle systems were successfully synthesized by mechanochemical activation of MoO2 and α-Fe2O3 equimolar mixtures throughout 0–12 h of ball-milling. The role of the long-range ferromagnetism of MoO2 on a fraction of more...
The present study aimed to investigate the effect of the royal jelly (RJ) on hepatotoxicity induced by molybdenum nanoparticles (MoO3-NPs), cadmium chloride (CdCl2), or their combination in male rats at biochemical, inflammation, immune response, his...
Pure and Molybdenum (Mo)-doped zinc oxide (ZnO) nanoparticles were prepared by a cost-effective combustion synthesis route. XRD results revealed the decrement in crystallite size of ZnO with an increase in Mo-doping concentration. Optical bandgap (Eg...
Over the last ten years, there has been a remarkable enhancement in the power conversion efficiency (PCE) of perovskite solar cells (PSCs), with poly (3,4-ethylenedioxythiohene):poly (styrenesulfonate) (PEDOT:PSS) emerging as a prevalent choice for t...
(1) Background: The rapid growth in the number of nanoparticles today raises questions about studying their impact on the environment, including the soil, as the main absorber of nanoparticles. The purpose of our research was to study the effect of M...
Ethanolysis is an effective method to depolymerize weak bonds in lignite under mild conditions, which can result in the production of high-value-added chemicals. However, improving ethanolysis yield and regulating its resulting product distribution i...
This study presents the synthesis of manganese molybdenum tetraoxide (MnMoO4)-based nanoparticles and then their experimental demonstration as saturable absorbers (SAs) in erbium-doped fiber lasers (EDFLs). The MnMoO4 nanoparticles were prepared and...
To obtain selective hydrogenation catalysts with low noble metal content, two carbon-supported Mo-Pt bimetallic catalysts have been synthesized from two different molybdenum precursors, i.e., Na2MoO4 and (NH4)6Mo7O24. The results obtained by X-ray ph...
Efficient use of natural gas to produce aromatics is an attractive subject; the process requires catalysts that possess high-performance active sites to activate stable C–H bonds. Here, we report a facile synthetic strategy to modify HMCM-49 wi...
The search for appropriate materials with favorable staggered energy band arrangements is important and is a great challenge in order to fabricate Z-scheme photocatalysts with high activity in visible light. In this study, we demonstrated a facile an...
Nickel molybdate (NiMoO4) nanoparticles were synthesized via calcination of an oxalate complex in static air at 500 °C. The oxalate complex was analyzed by thermal gravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR). The as-...
The electrochemical sensing of biomarkers has attracted more and more attention due to the advantages of electrochemical biosensors, including their ease of use, excellent accuracy, and small analyte volumes. Thus, the electrochemical sensing of biom...
A clean straightforward laser ablation method in deionized (DI) water is reported for the synthesis of Molybdenum (Mo) and Nickel (Ni) nanoparticles (NPs). The structural, morphological, and optical properties of the as-synthesized nanoparticles were...
In this work, a novel dual Z-scheme CdS/Ag2MoO4/β-Bi2O3 (CAB) composite heterojunction was synthesized, with the ultrafine CdS nanoparticles decorating two different-sized particles. In the beginning, the synergistic effect between BO and AMO ma...
Zirconia and 10%, 20%, and 30% cerium-doped zirconia nanoparticles (ZCO), ZCO-1, ZCO-2, and ZCO-3, respectively, were prepared using auto-combustion method. Binary nanohybrids, ZrO2@rGO and ZCO-2@rGO (rGO = reduced graphene oxide), and ternary nanohy...
In situ environmental transmission electron microscope (ETEM) could provide intuitive and solid proof for the local structure and chemical evolution of materials under practical working conditions. In particular, coupled with atmosphere and thermal f...
The photocatalytic oxidation (PCO) of pollutants using TiO2-based materials can significantly improve indoor air quality (IAQ), which in turn, has a significant impact on human health and life expectancy. TiO2-based nanoparticles (NPs) are widely use...
The main objective of this study was to evaluate the effect of functionalized silica nanoparticles with Fe2O3, NiO, and MoO3 metal oxides on the decomposition of asphaltenes, through an experimental simplex–centroid mixture design for surface a...
High temperature represents a critical constraint in the development of gas sensors. Therefore, investigating gas sensors operating at room temperature holds significant practical importance. In this study, coal-based porous carbon (C-700) and coal-b...
An electroluminescent quantum-dot light-emitting diode (QLED) device and a micro QLED device array with a top-emitting structure were demonstrated in this study. The QLED device was fabricated in the normal structure of [ITO/Ag/ITO anode]/PEDOT:PSS/P...
The resorcinol (R)-formaldehyde (F) polymerization was carried out in different experimental conditions to obtain RF/Mo doped carbon xerogels with different morphology, porosity and nature and dispersion of metal. Attractive or repulsive electrostati...
Molybdenum chalcogenides present interesting properties beyond their superconducting critical temperatures and upper critical magnetic fields, making them suitable for potential applications in tribology, batteries, catalysis, or thermopower. In this...
of 7