Skip to Content

558 Results Found

  • Article
  • Open Access
6 Citations
3,174 Views
13 Pages

25 January 2024

In this study, AA1050/AA6061 laminated composites were prepared by three-cycle accumulative roll bonding (ARB) and subsequent rolling. The effects of the rolling process on the microstructure evolution and mechanical properties of AA1050/AA6061 lamin...

(This article belongs to the Special Issue Advances in High-Performance Non-ferrous Materials—2nd Volume)
  • Article
  • Open Access
9 Citations
2,019 Views
19 Pages

Microstructural and Mechanical Properties of Dissimilar AA7075 and AA2024 Rotary Friction Weldments

  • Sandip Kumar Bauri,
  • Nagumothu Kishore Babu,
  • Malkapuram Ramakrishna,
  • Ateekh Ur Rehman and ,
  • Vanam Jaya Prasad and
  • Minnam Reddy Suryanarayana Reddy
  • + 1 author+ 0 author

21 November 2024

This study aims to explore the effects of various pre- and post-weld heat treatments (PWHTs) on the microstructural and mechanical properties of dissimilar aluminium alloys, namely AA7075 and AA2024, joined through rotary friction welding. The joints...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
16 Citations
3,398 Views
19 Pages

Effect of Heat Treatment on the Microstructure and Mechanical Properties of Rotary Friction Welded AA7075 and AA5083 Dissimilar Joint

  • Aditya M. Mahajan,
  • Nagumothu Kishore Babu,
  • Mahesh Kumar Talari,
  • Ateekh Ur Rehman and
  • Prakash Srirangam

20 March 2023

The present work aims to investigate the changes in the microstructural and mechanical properties of various pre- and post weld heat treatments (PWHTs) on rotary friction welded dissimilar (AA7075 and AA5083) aluminum alloys. The investigation focuse...

(This article belongs to the Special Issue Welding, Joining, and Additive Manufacturing of Metals and Alloys)
  • Article
  • Open Access
4 Citations
1,132 Views
20 Pages

1 April 2026

Friction stir welding (FSW) of dissimilar aluminium alloys often results in non-uniform microstructure and hardness distributions due to asymmetric temperature fields and material flow. The objective of this study is to establish a quantitative relat...

(This article belongs to the Special Issue Fabrication of Advanced Materials)
  • Article
  • Open Access
6 Citations
4,416 Views
18 Pages

Microstructure and Mechanical Properties of Spark Plasma Sintered and Severely Deformed AA7075 Alloy

  • Dariusz Garbiec,
  • Volf Leshchynsky,
  • Andrea García-Junceda,
  • Radosław Swadźba and ,
  • Piotr Siwak,
  • Grzegorz Adamek and
  • Krzysztof Radwański
  • + 2 authors+ 0 author

10 September 2021

In this paper, the microstructure and mechanical properties of AA7075 with a coarse-fine-grained laminated microstructure produced by spark plasma sintering (SPS) and the cyclic extrusion severe deformation (KOBO) technique were investigated. It was...

(This article belongs to the Special Issue Spark Plasma Sintering of Metals and Metal Matrix Nanocomposites)
  • Article
  • Open Access
6 Citations
2,247 Views
19 Pages

Synthesis, Microstructure Investigation, Mechanical and Tribological Behaviour of the AA5083–WC Composite

  • Hany R. Ammar,
  • Subbarayan Sivasankaran,
  • El-Sayed M. Sherif,
  • Fahad A. Almufadi and
  • Abdel-baset H. Mekky

5 April 2023

In this study, AA5083–WC composites were developed by ball milling followed by hot consolidation. The microstructures of the developed composites were investigated using XRD, SEM, EDX, and EBSD. The developed composites exhibited a homogeneous...

(This article belongs to the Special Issue Corrosion of Materials: Evaluation, Testing, Protection, and Failure Analysis)
  • Article
  • Open Access
27 Citations
6,185 Views
17 Pages

Microstructure, Texture, Electrical and Mechanical Properties of AA-6063 Processed by Multi Directional Forging

  • Alireza Dashti,
  • Mohammad Hossein Shaeri,
  • Reza Taghiabadi,
  • Faramarz Djavanroodi and ,
  • Farzaneh Vali Ghazvini and
  • Hamid Javadi
  • + 1 author+ 0 author

29 November 2018

In current research, the effect of the multi-directional forging (MDF) process on the microstructure, texture, mechanical and electrical properties of AA-6063 under different heat treatment conditions at various MDF temperatures was studied. The anne...

  • Article
  • Open Access
194 Views
18 Pages

5 November 2026

The AA7075 alloy is widely used in the aerospace industry, particularly for its high strength-to-weight ratio in the production of critical structural components such as wing spars, fuselage frames, landing gear supports, rocket booster casings, and...

  • Article
  • Open Access
374 Views
12 Pages

6 September 2026

7xxx series aluminum alloys exhibit high strength and low density; however, their high degree of alloying results in a pronounced hot-cracking tendency, making direct casting forming challenging. In this study, a rheo-squeeze-cast AA7075 alloy was in...

(This article belongs to the Special Issue Advances in Continuous Casting and Solidification of Metals)
  • Article
  • Open Access
10 Citations
2,935 Views
14 Pages

12 February 2020

The aim of this research was to investigate the effect of different heat treatment conditions of AA2519 friction stir welded joints on their microstructure and residual stresses. The following welding parameters have been used: 500 rpm tool rotation...

(This article belongs to the Special Issue High Performance Nonferrous Alloys: Composition, Microstructure and Properties)
  • Article
  • Open Access
884 Views
21 Pages

9 August 2026

This study investigates the influence of joining technology on the microstructural evolution and mechanical properties of joints produced from extruded AA2017 aluminum alloy rods. Rotary Friction Welding (RFW) was compared with conventional TIG weldi...

(This article belongs to the Special Issue Microstructural and Mechanical Properties of Metal Alloys)
  • Article
  • Open Access
11 Citations
6,360 Views
10 Pages

Residual Stress Distribution and Microstructure Evolution of AA 6061-T6 Treated by Warm Laser Peening

  • Shu Huang,
  • Zuowei Wang,
  • Jie Sheng,
  • Emmanuel Agyenim-Boateng and ,
  • Muxi Liu,
  • Xiaole Yang and
  • Jianzhong Zhou
  • + 2 authors+ 0 author

22 November 2016

The aim of this paper is to study the effects of laser peening (LP) on the residual stress distribution and microstructure evolution of AA 6061-T6 under different temperatures. A laser peening experiment was conducted on the square-shape samples by u...

(This article belongs to the Special Issue Laser Shock Processing on Metal)
  • Article
  • Open Access
64 Citations
5,486 Views
22 Pages

Additive Friction Stir Deposition of AA7075-T6 Alloy: Impact of Process Parameters on the Microstructures and Properties of the Continuously Deposited Multilayered Parts

  • Yousef G. Y. Elshaghoul,
  • Mohamed M. El-Sayed Seleman,
  • Ashraf Bakkar,
  • Sarah A. Elnekhaily and ,
  • Ibrahim Albaijan,
  • Mohamed M. Z. Ahmed,
  • Abdou Abdel-Samad and
  • Reham Reda
  • + 3 authors+ 0 author

13 September 2023

In the aircraft industry, the high-strength aluminum alloys AA7075 and AA2024 are extensively used for the manufacture of structural parts like stringers and skins, respectively. Additive manufacturing (AM) of the AA7075-T6 aluminum alloy via frictio...

(This article belongs to the Special Issue Processing, Properties and Applications of Composite Materials)
  • Article
  • Open Access
1 Citations
1,826 Views
15 Pages

10 September 2024

Researches were conducted on the laser welding of 3 mm sheet-thickness lap joints of AA5052 with ER4043 filler wires. The effects of laser power on the joint morphology, microstructure, mechanical properties, and corrosion resistance were investigate...

  • Article
  • Open Access
6 Citations
2,354 Views
18 Pages

27 June 2023

The current study investigates the influence of hot rolling on the microstructure evolution of the near-surface region on AA7050 aluminum alloy and the corrosion performance of the alloy. It is revealed that hot rolling resulted in grain refinement i...

(This article belongs to the Special Issue Advanced Materials Design and Manufacturing Technologies of Nonferrous Metals)
  • Article
  • Open Access
14 Citations
4,957 Views
18 Pages

Experimental Investigations on the Effects of Rotational Speed on Temperature and Microstructure Variations in Incremental Forming of T6- Tempered and Annealed AA2219 Aerospace Alloy

  • Asim Ahmad Riaz,
  • Naveed Ullah,
  • Ghulam Hussain,
  • Mohammed Alkahtani and ,
  • Muhammad Naeem Khan and
  • Shaukat Khan
  • + 1 author+ 0 author

17 June 2020

This research work primarily focused on investigating the effects of changing rotational speed on the forming temperature and microstructure during incremental sheet metal forming (ISF) of AA-2219-O and AA-2219-T6 sheets. Tool rotational speed was va...

(This article belongs to the Special Issue Forming and Heat Treatment of Modern Metallic Materials)
  • Article
  • Open Access
32 Citations
4,433 Views
17 Pages

15 February 2019

The aim of this research was to investigate the influence of post-weld heat treatment (PWHT, precipitation hardening) on the microstructure and fatigue properties of an AA2519 joint obtained in a friction stir-welding process. The welding process was...

(This article belongs to the Special Issue Structure and Mechanical Properties of Transition Group Metals, Alloys, and Intermetallic Compounds)
  • Article
  • Open Access
27 Citations
3,369 Views
15 Pages

Influence of Vanadium and Niobium Carbide Particles on the Mechanical, Microstructural, and Physical Properties of AA6061 Aluminum-Based Mono- and Hybrid Composite Using FSP

  • Waheed Sami Abushanab,
  • Essam B. Moustafa,
  • Emad S. Goda,
  • Emad Ghandourah and ,
  • Mohammed A. Taha and
  • Ahmed O. Mosleh
  • + 1 author+ 0 author

10 January 2023

The ceramic particle reinforcement process is one of the most utilized techniques to enhance the metal surface. The current investigation uses vanadium and niobium carbides to reinforce the AA6061 alloy using the friction stir process (FSP). The mech...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
14 Citations
3,021 Views
11 Pages

Effect of Holding Time on Densification, Microstructure and Selected Properties of Spark Plasma Sintered AA7075-B4C Composites

  • Anna Wąsik,
  • Beata Leszczyńska-Madej,
  • Marcin Madej,
  • Rafał Rubach and
  • Dariusz Garbiec

11 March 2022

The paper presents the effect of the holding time, varying between 1 min 15 s and 10 min, on the microstructure evolution and development of selected properties of spark plasma sintered AA7075-based composites reinforced with 3, 5 and 10 wt% sub-micr...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
17 Citations
3,006 Views
17 Pages

Study on Microstructure Evolution Mechanism of Gradient Structure Surface of AA7075 Aluminum Alloy by Ultrasonic Surface Rolling Treatment

  • Lei Fu,
  • Xiulan Li,
  • Li Lin,
  • Zhengguo Wang and ,
  • Yingqian Zhang,
  • Yunrong Luo,
  • Shisen Yan,
  • Chao He and
  • Qingyuan Wang
  • + 4 authors+ 0 author

14 August 2023

The materials with grain size gradient variation on the surface, which were prepared with mechanical-induced severe plastic deformation, always show high resistance to high and low cycle fatigue and frictional wear because of their good strength&ndas...

(This article belongs to the Special Issue Mechanics Behavior, Fatigue Damage, and Microstructure Evolution of Metallic Material)
  • Article
  • Open Access
9 Citations
3,894 Views
15 Pages

31 December 2020

The microstructure evolution of AA2060 Al alloy containing Li during two-stage homogenization treatment was investigated by optical microscopy (OM), scanning electron microscopy (SEM) equipped with energy dispersive X-ray spectroscopy (EDS), differen...

  • Article
  • Open Access
11 Citations
2,356 Views
14 Pages

Assessment of the Thermomechanical Behavior and Microstructure of AA 7075-T6 Aluminum Alloy Lap Joints at Optimal Predicted FSW Process Parameters

  • Oumayma Toumi,
  • Romdhane Ben Khalifa,
  • Alessia Teresa Silvestri,
  • Ridha Ennetta and ,
  • Fabio Scherillo and
  • Umberto Prisco
  • + 1 author+ 0 author

23 July 2024

The lap joints of AA 7075-T6 aluminum alloy were assembled using the friction stir welding (FSW) technique. Experimental studies were performed to characterize the thermomechanical properties of these welds. The main goal of this research was to comp...

  • Article
  • Open Access
5 Citations
1,682 Views
17 Pages

27 October 2025

The application of laser powder bed fusion (LPBF) to 7xxx-series aluminum alloys is fundamentally limited by hot cracking and porosity. This study demonstrates that adding 5 wt.% AlCoCrFeNi2.1 high-entropy alloy (HEA) particles to 7075 aluminum alloy...

  • Article
  • Open Access
4 Citations
1,415 Views
17 Pages

Effect of Secondary Aging Conditions on Mechanical Properties and Microstructure of AA7150 Aluminum Alloy

  • Fei Chen,
  • Han Wang,
  • Yanan Jiang,
  • Yu Liu and ,
  • Qiang Zhou and
  • Quanqing Zeng
  • + 1 author+ 0 author

17 October 2025

Al-Zn-Mg-Cu alloys are widely used as heat-treatable ultra-high-strength materials in aerospace structural applications. While conventional single-stage aging enables high strength, advanced performance demands call for precise microstructural contro...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
19 Citations
3,640 Views
19 Pages

Friction Stir-Spot Welding of AA5052-H32 Alloy Sheets: Effects of Dwell Time on Mechanical Properties and Microstructural Evolution

  • Mohamed M. Z. Ahmed,
  • Mohamed M. El-Sayed Seleman,
  • Asmaa M. El-Sayed Sobih,
  • Ashraf Bakkar and ,
  • Ibrahim Albaijan,
  • Kamel Touileb and
  • Ali Abd El-Aty
  • + 2 authors+ 0 author

1 April 2023

Friction stir-spot welding (FSSW) as a solid-state joining process for local welding offers a number of benefits for applications in the automotive, aerospace, and marine industries. In these industries, and from an economic point of view, producing...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
14 Citations
3,234 Views
13 Pages

7 November 2024

Wire-arc additive manufacturing (WAAM) is widely applied in the aerospace, automotive, defense, and other industries. As such, the study of the formation and evolution mechanism of grains to achieve precise control over the performance of additive pa...

(This article belongs to the Special Issue Advance in Wire-Based Additive Manufacturing of Metal Materials)
  • Article
  • Open Access
23 Citations
4,496 Views
18 Pages

AA5754–Al2O3 Nanocomposite Prepared by Friction Stir Processing: Microstructural Evolution and Mechanical Performance

  • Moustafa M. Mohammed,
  • Mahmoud E. Abdullah,
  • M. Nafea M. Rohim,
  • Andrzej Kubit and
  • Hamed Aghajani Derazkola

The utilization of Al2O3 nanopowder to reinforce AA5754 aluminum alloy through blind holes employing the friction stir processing (FSP) technique to produce an aluminum matrix nanocomposite is explored in this paper. Motivated by the necessity to enh...

(This article belongs to the Special Issue Recent Developments in Friction Stir Welding Technology and Applications)
  • Article
  • Open Access
3 Citations
2,328 Views
26 Pages

27 June 2024

In this study, the microstructural properties, wear resistance, and corrosion behavior of H111 hot-rolled AA5754 alloy before heat treatment, after homogenization, and after aging were examined. The microstructure was mainly composed of the scattered...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
2 Citations
2,264 Views
15 Pages

29 April 2024

The reliability of friction stir welded joints is a critical concern, particularly given their potential applications in the aerospace manufacturing industry. This study offers a quasi-in situ observation of the microstructural response during fatigu...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
727 Views
17 Pages

The development of lightweight aluminum matrix composites with improved mechanical performance and thermal stability using sustainable reinforcement materials remains a significant challenge in structural materials engineering. Although ceramic-reinf...

(This article belongs to the Special Issue Additive Manufacturing of Smart Composites)
  • Article
  • Open Access
53 Citations
3,994 Views
16 Pages

The Effect of Temper Condition and Feeding Speed on the Additive Manufacturing of AA2011 Parts Using Friction Stir Deposition

  • Mohamed M. Z. Ahmed,
  • Mohamed M. El-Sayed Seleman,
  • Ebtessam Elfishawy,
  • Bandar Alzahrani and ,
  • Kamel Touileb and
  • Mohamed I. A. Habba
  • + 1 author+ 0 author

25 October 2021

In the current study, solid-state additive manufacturing (SSAM) of two temper conditions AA2011 was successfully conducted using the friction stir deposition (FSD) process. The AA2011-T6 and AA2011-O consumable bars of 20 mm diameter were used as a f...

(This article belongs to the Special Issue Advance in Friction Stir Processed Materials)
  • Article
  • Open Access
7 Citations
2,963 Views
15 Pages

The Effect of Soaking Time on Mechanical Properties of Roll-Bonded AA3003 and AA4045 Used for Heat Exchangers

  • Joseph S. Moema,
  • Charles W. Siyasiya,
  • Veronica K. Morudu and
  • Thokozani Buthelezi

23 September 2023

Due to the rising need for energy saving, high-performing automotive heat exchangers, demand has significantly grown in recent years. As a result, effective fin-tube heat exchangers are becoming more popular. These tubes are typically made by rolling...

(This article belongs to the Special Issue Aluminum Alloys: Structures, Properties and Applications)
  • Article
  • Open Access
11 Citations
2,389 Views
9 Pages

Dissimilar Friction Stir Welding of AA2519 and AA5182

  • Ivan S. Zuiko,
  • Sergey Malopheyev,
  • Sergey Mironov and
  • Rustam Kaibyshev

8 December 2022

In this study, the friction-stir welding (FSW) technique was successfully applied for joining of AA2519 to AA5181 alloy. Microstructure and mechanical properties of dissimilar FSW joints were investigated by optical microscopy, microhardness, and ten...

(This article belongs to the Special Issue Recent Advances on Mechanical Properties and Microstructural Features of Alloy/Steel)
  • Article
  • Open Access
53 Citations
5,391 Views
19 Pages

Microstructure and Mechanical Properties of Dissimilar Friction Stir Welded AA2024-T4/AA7075-T6 T-Butt Joints

  • Mohamed M.Z. Ahmed,
  • Mohamed M. El-Sayed Seleman,
  • Zeinab A. Zidan,
  • Rashad M. Ramadan and ,
  • Sabbah Ataya and
  • Naser A. Alsaleh
  • + 1 author+ 0 author

10 January 2021

Aircraft skin and stringer elements are typically fabricated from 2xxx and 7xxx series high strength aluminum alloys. A single friction stir welding (FSW) pass using a specially designed tool with shoulder/pin diameter ratio (D/d) of 3.20 is used to...

(This article belongs to the Special Issue Advanced Welding Technology in Metals)
  • Proceeding Paper
  • Open Access
1,547 Views
7 Pages

Effect of FSW Parameters on Microstructure and Mechanical Properties of Dissimilar Aluminum Joints

  • Jayakumar Krishnamoorthy,
  • Saran Kumar Murugesan,
  • Sanjuvigasini Nagappan and
  • Sanjay Prakash Prithiviraj

Friction stir welding (FSW) is a novel welding technique that produces a solid-state weld by generating frictional heat and plastic deformation at the weld spot with a revolving, non-consumable welding tool. Despite processing a wide range of industr...

(This article belongs to the Proceedings of International Conference on Mechanical Engineering Design)
  • Article
  • Open Access
8 Citations
3,625 Views
14 Pages

Corrosion Behavior of Cold-Formed AA5754 Alloy Sheets

  • Anna Dobkowska,
  • Agata Sotniczuk,
  • Piotr Bazarnik,
  • Jarosław Mizera and
  • Halina Garbacz

14 January 2021

In this work, the influence of bending an AA5457 alloy sheet and the resulting microstructural changes on its corrosion behavior was investigated. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to perform deta...

(This article belongs to the Collection Microstructure and Corrosion Behavior of Advanced Alloys)
  • Feature Paper
  • Article
  • Open Access
21 Citations
5,857 Views
11 Pages

Microstructure and Mechanical Properties of Friction Stir Welded AA6061/AA6061 + 40 vol% SiC Plates

  • Sara Señorís-Puentes,
  • Ricardo Fernández Serrano,
  • Gaspar González-Doncel,
  • Jesper Henri Hattel and
  • Oleg V. Mishin

23 January 2021

The feasibility of butt friction stir welding (FSW) of a metal matrix composite (MMC) with a very high SiC particle content to a monolithic aluminum alloy is tested in this work. It is demonstrated for the first time that sound FSW joints can be obta...

(This article belongs to the Special Issue Advanced Process Technologies Based on Friction Stir Welding and Linear Friction Welding)
  • Feature Paper
  • Review
  • Open Access
44 Citations
7,424 Views
28 Pages

27 February 2021

To reduce environmental impacts and ensure competitiveness, the fabrication and construction sectors focus on minimizing energy and material usage, which leads to design requirements for complex structures by joining of similar and dissimilar materia...

  • Article
  • Open Access
12 Citations
3,757 Views
14 Pages

A Study on the Red Clay Binder Stabilized with a Polymer Aqueous Solution

  • Jinsung Kim,
  • Hyeonggil Choi,
  • Hyeun-Min Rye,
  • Keun-Byoung Yoon and
  • Dong-Eun Lee

25 December 2020

In this study, the performance evaluation was performed by adding a polymer aqueous (PA) solution as a new additive of the red clay binder for use in the rammed-earth construction method. The evaluation items were compressive strength, water erosion,...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
5 Citations
1,488 Views
26 Pages

Influence of Vibration-Assisted Dynamic Solidification on Microstructure and Mechanical Properties of Permanent Mold Cast Aluminum Alloy 2024 with Conformal Cooling

  • Muhammad Waqas Ali Khan,
  • Rauf Ahmad,
  • Syed Masood Arif Bukhari,
  • Muhammad Sultan and ,
  • Naveed Husnain,
  • Muhammad Tuoqeer Anwar,
  • Umer Bin Nooman,
  • Hassan Raza,
  • Abid Latif and
  • Khurram Hasnain Bukhari
  • + 6 authors+ 1 author

Aluminum alloy 2024 (AA2024) is widely used in the aerospace sector, where a fine, uniform, and equiaxed grain structure is crucial for achieving enhanced mechanical properties. This study examines the effect of dynamic solidification, assisted by me...

  • Article
  • Open Access
7 Citations
2,256 Views
12 Pages

Study on Symmetry and Asymmetry Rolling of AA2519-T62 Alloy at Room-Temperature and Cryogenic Conditions

  • Robert Kosturek,
  • Sebastian Mróz,
  • Andrzej Stefanik,
  • Piotr Szota and ,
  • Piotr Gębara,
  • Agata Merda,
  • Marcin Wachowski and
  • Michał Gloc
  • + 3 authors+ 0 author

2 November 2022

The aim of this investigation was to identify the effect of rolling at room temperature and under cryogenic conditions on selected properties and the microstructure of the AA2519-T62 aluminum alloy. The rolling processes were conducted with different...

  • Article
  • Open Access
23 Citations
2,556 Views
17 Pages

Effects of Partial-Contact Tool Tilt Angle on Friction Stir Welded AA1050 Aluminum Joint Properties

  • Mahmoud E. Abdullah,
  • M. Nafea M. Rohim,
  • M. M. Mohammed and
  • Hamed Aghajani Derazkola

31 May 2023

This study aims to investigate the impact of partial-contact tool tilt angle (TTA) on the mechanical and microstructure properties of the AA1050 alloy friction stir weld (FSW). Three levels of partial-contact TTA were tested, 0°, 1.5°, and 3&...

(This article belongs to the Special Issue Advances in the Experimentation and Numerical Modeling of Material Joining Processes)
  • Article
  • Open Access
8 Citations
5,217 Views
18 Pages

Joining Stainless-Steel AISI 304 and High-Strength Aluminum Alloy AA 6082 by Brazing Using Al-Ge-Si Foils

  • Alexander Ivannikov,
  • Anton Abramov,
  • Nikita Popov,
  • Milena Penyaz and ,
  • Alexey Suchkov,
  • Natalia Pukhareva and
  • Oleg Sevryukov
  • + 2 authors+ 0 author

11 January 2023

An Al-40.0Ge-3.4Si wt.% alloy foil with a thickness of 50 ± 5 μm, obtained via an ultrafast solidification method, is described in this work. A complete wetting of the aluminum alloy substrate with a wetting angle of 0° is observed, and...

(This article belongs to the Special Issue Welding and Joining of Dissimilar Materials)
  • Article
  • Open Access
40 Citations
5,466 Views
20 Pages

23 May 2018

Bobbin friction stir welding (BFSW), with its fully penetrated pin and double-sided shoulder, can provide high rates of heat generation. This produces solid-state thermo-mechanical grain refinement. In this paper, the microstructure evolution of the...

(This article belongs to the Special Issue Recent Achievements in Rotary, Linear and Friction Stir Welding of Metals Alloys)
  • Article
  • Open Access
40 Citations
5,973 Views
18 Pages

Dissimilar Friction Stir Welding of AA2024 and AISI 1018: Microstructure and Mechanical Properties

  • Mohamed M. Z. Ahmed,
  • Nabil Jouini,
  • Bandar Alzahrani,
  • Mohamed M. El-Sayed Seleman and
  • Mohammad Jhaheen

14 February 2021

This study investigated the effect of the friction stir welding rotation rate and welding speed on the quality and properties of the dissimilar joints between aluminum and carbon steel. Plates of 4 mm thickness from both AA2024 and AISI 1018 were suc...

(This article belongs to the Special Issue Friction Stir Welding of Lightweight Alloys)
  • Article
  • Open Access
7 Citations
2,959 Views
17 Pages

Effects of Specimen Thickness and Non-Isothermal Process on Creep Behavior of AA2024 Aluminum Alloy

  • Xintong Wu,
  • Lihua Zhan,
  • Youliang Yang,
  • Yongqian Xu and ,
  • Qiliang Zhang and
  • Xiaobo Yang
  • + 1 author+ 0 author

16 February 2023

Fiber metal laminate (FML) is a kind of lightweight material that has garnered much attention in recent years due to its excellent properties under tensile, flexure, and impact conditions. However, little attention has been paid to the evolution of a...

  • Article
  • Open Access
20 Citations
3,700 Views
15 Pages

Research on the Friction Stir Welding of Sc-Modified AA2519 Extrusion

  • Robert Kosturek,
  • Lucjan Śnieżek,
  • Janusz Torzewski and
  • Marcin Wachowski

21 September 2019

The aim of this research was to investigate the effect of friction stir welding (FSW) parameters on microstructure and mechanical properties of Sc-modified AA2519 extrusion joints. The workpiece was welded by FSW in non-heat-treated condition with se...

(This article belongs to the Special Issue Friction Stir Welding Prospective on Light-Alloys Joints)
  • Article
  • Open Access
3 Citations
2,690 Views
16 Pages

Conventional aluminum recycling consumes a substantial amount of energy and has a negative impact on secondary alloys. To address this challenging topic, Friction Stir Extrusion has been patented, which represents an innovative solid-state recycling...

  • Article
  • Open Access
7 Citations
2,715 Views
20 Pages

12 March 2025

This study evaluates the development and characterization of AA5083/Coal composite joints using Friction Stir Processing (FSP) technology. The primary findings reveal significant improvements in the grain structure, with the utilization of FSP leadin...

  • Article
  • Open Access
3 Citations
1,701 Views
18 Pages

This study fabricated AA2024-T4 aluminum alloy components using Additive Friction Stir Deposition (AFSD) to systematically investigate the effects of tool rotational speed (100–400 rpm) on the macroscopic morphology, microstructure, and mechani...

of 12