Skip to Content
PolymersPolymers
  • Article
  • Open Access

25 December 2020

14 Pages

A Study on the Red Clay Binder Stabilized with a Polymer Aqueous Solution

,
,
,
and
1
School of Architecture, Civil Environment and Energy Engineering, Kyungpook National University, Daegu 41566, Korea
2
Department of Polymer Science and Engineering, Kyungpook National University, Daegu 41566, Korea
*
Authors to whom correspondence should be addressed.
This article belongs to the Section Polymer Applications

Abstract

In this study, the performance evaluation was performed by adding a polymer aqueous (PA) solution as a new additive of the red clay binder for use in the rammed-earth construction method. The evaluation items were compressive strength, water erosion, shrinkage, crystal structure, and microstructure. As a result of the experiment, the binder was improved by efficiently bonding the silica particles by the polymerized polymer. It was confirmed that adding a PA solution to red clay enhances the compressive strength, which is further improved when 5 wt% poly(Acrylic acid(AA)-co-Acrylamide(AM)) is added to the PA solution. Microstructural analysis indicated that the addition of a PA solution facilitates effective bonding of the silica particles of red clay to form hydrogen bonding with poly(AA-co-AM) and encourages aggregate formation. Therefore, the study confirmed that PA solution can be applied to satisfy the performance requirements of the rammed-earth construction by improving the durability and strength of the binder.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.