Moored buoys are important components of stereo platforms for ocean observation, which are crucial in underwater exploration. In complex marine environments, power supply and data transmission between moored buoys and underwater sensors are difficult...
Wireless Power Transfer (WPT) technology is gaining global popularity. However, in some applications, data transmission is also required to monitor the load states. This paper presents an alternative wireless power and data transmission method via th...
When using the conventional two-coil inductive link for the simultaneous wireless power and data transmissions in implantable biomedical sensor devices, the strong power carrier could overwhelm the uplink data signal and even saturate the external up...
An inductively powered passive transmitter architecture for wireless sensornodes is presented in this paper. The intended applications are inductively powered internally illuminated photoreactors. The application range of photoreactors is wide. They...
Simultaneous wireless power and data transfer (SWPDT) technology is usually needed in wireless power transfer (WPT) systems. In this paper, to achieve the efficient and stable SWPDT, the signal to noise rate (SNR) is first optimized through the analy...
One of the major challenges associated with e-textiles is the connection between flexible fabric-integrated wires and rigid electronics. This work aims to increase the user experience and mechanical reliability of these connections by foregoing conve...
The mutual inductance between coils directly affects many aspects of performance in wireless power transmission systems. Therefore, a reliable calculation method for the mutual inductance between coils is of great significance to the optimal design o...
Wireless power and data transmission (WPDT) solutions for medical implants are highly desired. However, achieving a high-power transmission efficiency and data rate simultaneously over an inductive link remains a significant challenge. This paper pre...
The aim of this review was to assess the current viable technologies for wireless power delivery and data transmission through metal barriers. Using such technologies sensors enclosed in hermetical metal containers can be powered and communicate thro...
The growing demand for active medical implantable devices requires data and or power links between the implant and the outside world. Every implant has to be encapsulated from the body by a specific housing and one of the most common materials used i...
This study aimed to determine and analyze the performance of an electric motor installed in a small city car, which was an internal combustion engine (ICE) car with manual transmission and front-wheel drive converted into an electric vehicle. A manua...
This paper explores the feasibility of using a wireless Inductive Resonant Link (IRL) for wearable posture monitoring. The proposed system is based on magnetically coupled textile resonators and is implemented using a Single Input Multiple Output (SI...
This paper demonstrates body-coupled (BC) data transmission and multi-source power delivery systems for neural interface applications. The implanted data transmitter and power receiver utilize an electrode interface rather than an antenna or coil int...
The incorporation of the full dynamics of the different conversion stages of wave energy converters (WECs), from ocean waves to the electricity grid, is essential for a realistic evaluation of the power flow in the drive train. WECs with different po...
Implantable technologies targeting the cerebral cortex and deeper brain structures are increasingly utilised in human–machine interfacing, advanced neuroprosthetics, and clinical interventions for neurological conditions. These systems require...
The use of wireless communication using inductive links to transfer data and power to implantable microsystems to stimulate and monitor nerves and muscles is increasing. This paper deals with the development of the theoretical analysis and optimizati...
Foreign object detection (FOD) is considered a key method for detecting objects in the air gap of a wireless charging system that could pose a risk due to strong inductive heating. This paper describes a novel method for the detection of metallic obj...
We present rotational misalignment and bending effects on a hybrid system to transfer power and data wirelessly for an implantable device. The proposed system consists of a high-frequency coil (13.56 MHz) to transfer power and an ultra-high frequency...
This paper presents a wireless and Non-invasive DC Current (DCC) sensing scheme as an IoT sensors. A RF module transmits only ID codes to a receiver, and the ID transmissions are called as “DCC Beat”. The interval time of DCC Beats depend on the indu...
Measurement-based technology has been developed in the area of power transmission systems with phasor measurement units (PMU). Using high-resolution PMU data, the oscillatory behavior of power systems from general electromagnetic oscillations to sub-...
The variation of mutual inductance and load parameters will affect the transmission power and efficiency of the inductive power transfer (IPT) system. The identification of mutual inductance and load parameters is an essential part of establishing a...
Fault location estimation in transmission lines is critical for power system reliability. Various methods have been developed for this purpose, among which transient frequency spectrum analysis (TFSA) stands out as a recent method based on travelling...
This paper presents a passive wireless measurement system based on wireless power transfer (WPT) technology. It does not require separate information and power transmission circuits. The data receiver only needs to send a short signal to the data col...
This article presents the development of a power loss emulation (PLE) system device to study and find ways of mitigating skin tissue heating effects in transcutaneous energy transmission systems (TETS) for existing and next generation left ventricula...
Detection of the axial displacement of power-transformer winding is important to ensure its highly reliable operation. Frequency response analysis is a promising candidate in detecting the axial displacement. However, a method of detecting the axial...
Very fast transient overvoltage (VFTO) is characterized by short wavefront time, high amplitude and wide frequency. VFTO poses a threat to the safe operation of power equipment. In order to suppress the harmful effects of VFTO transmission on power e...
Directly modulated 850-nm multimode vertical-cavity surface-emitting lasers (MM-VCSELs) with different oxide apertures and transmission microstrip lengths are compared on the transmission performance of the non-return-to-zero on-off keying (NRZ-OOK)...
Implantable electronic devices have been evolving at an astonishing pace, due to the development of fabrication techniques and consequent miniaturization, and a higher efficiency of sensors, actuators, processors and packaging. Implantable devices, w...
Implantable medical devices present several technological challenges, one of the most critical being how to provide power supply and communication capabilities to a device hermetically sealed within the body. Using a battery as a power source represe...
As an auxiliary function of the wireless power transfer (WPT) system, coil positioning can solve the power and efficiency degradation during power transmission caused by misalignment of the magnetic coupler. In this paper, a Hall sensor array is used...
In this work, a novel current metering device was presented. This device was intended to bring current metering capabilities to a wide variety of scenarios: Developing countries, rural areas, or any situation with technological constraints. The devic...
The energy problem has become one of the critical factors limiting the development of underwater wireless sensor networks (UWSNs), and cooperative multiple-input–multiple-output (MIMO) technology has shown advantages in energy saving. However,...
This paper presents a performance analysis based on a practical approach of narrowband communication through power lines (Power Line Communication—PLC) to the last-mile industrial environment. A kit for developing PLC based applications, in acc...
The printed circuit board (PCB) winding coil offers advantages such as small size, high precision, high repeatability, and low cost, making it conducive to the miniaturization of electronic equipment and a popular choice in wireless power transmissio...
With the ongoing trend toward miniaturization via system-on-chip (SoC), both radio-frequency (RF) SoCs and on-chip multi-sensory systems are gaining significance. This paper compares the inductance of a miniaturized on-chip near field communication (...
A cochlear implant (CI) system holds two spiral coils, one external and one implanted. These coils are used to transmit both data and power. A magnet at the center of the coils ensures proper alignment to assure the highest coupling. However, when th...
Since the evaporation duct height (EDH) only covers the antenna height of most shipborne microwave radars, mastering the EDH in advance has great significance in achieving long-range target detection. In this paper, a set of hydrological and meteorol...
This paper aims to present the analysis and development of a complete electronic smart meter that is able to perform four-quadrant measurements, act as a three-phase shunt active power filter (APF), and control three-phase induction motors by stator...
In recent years, cross-platform co-simulation has become an important development direction of the real-time simulation of power systems. Model segmentation is at the core of the realization of cross-platform joint simulation and parallel real-time s...
With the development of communication technologies, the use of wireless systems in biomedical implanted devices has become very useful. Bio-implantable devices are electronic devices which are used for treatment and monitoring brain implants, pacemak...
Artificial intelligence (AI)-based fault diagnosis methods have been widely studied for power grids, with most research focusing on fault interval localization rather than precise fault point identification. In cases involving long-distance transmiss...
Telemetry allows to monitor the behavior of a system and it is applied to many different and popular fields such as motorsport. In this case, a data-logger collects all the data coming from different automobile sensors providing a very reliable image...
Application of a high-efficiency voice communication systems based on broadband over power line-power line communication (BPL-PLC) technology in medium voltage networks, including hazardous areas (like the oil and mining industry), as a redundant mea...
This paper focuses on the electro-thermal analysis of a doubly-fed induction generator (DFIG) in a wind turbine (WT) with gear transmission configuration. The study of the thermal mechanism plays an important role in the development of cost-effective...
The power of mucosal anti-HIV-1 envelope immunoglobulins (Igs) to block virus transmission is underappreciated. We used passive immunization, a classical tool to unequivocally prove whether antibodies are protective. We mucosally instilled recombinan...
With direct current (DC) power generation from renewable sources, as well as the current relocation of loads from alternating current (AC) to DC, medium-voltage DC (MVDC) should fill gaps in the areas of distribution and transmission, thereby improvi...
Soft wireless passive sensors have been applied in biological, engineering, and other fields due to their advantages in powerless supply and remote data transmission. External information is obtained by soft wireless passive sensors via the external...
This study aimed to analyze and optimize the thermal induction hardening process applied to toothed transmission gears, focusing on thermal aspects, structural deformation, and topology optimization, while exploring the feasibility of various materia...
Unmanned aerial vehicles (UAVs) are commonly used in various fields and industries, but their limited battery life has become a key constraint for their development. Wireless Power Transmission (WPT) technology, with its convenience, durability, inte...
The underwater internet of things (UIoT) has emerged as a booming technology in today’s digital world due to the enhancement of a wide range of underwater applications concerning ocean exploration, deep-sea monitoring, underwater surveillance,...
of 2