136 Results Found

This study aims to compare photoacoustic (FTIR–PAS), diffuse reflectance (DRIFT), and attenuated total reflection (ATR) FTIR modalities in the wide wavenumber range from NIR (7500 cm−1) to FIR (150 cm−1) for the same silicate soil samples under the s...

The formation of complexes and disproportionation of nitrogen oxides (NO, N2O) on cationic forms of LTA, FAU, and MOR zeolites was investigated by diffuse-reflectance IR spectroscopy. N2O is adsorbed on the samples under study in the molecular form a...

The qualitative analysis of nanodiamonds by FTIR spectrometry as photoacoustic (FTIR–PAS), diffuse-reflectance (DRIFT), and attenuated total reflection (ATR) modalities was evaluated for rapid and nondestructive analysis and comparison of nanod...

Infrared (IR) spectroscopy is among the most powerful spectroscopic techniques available for the morphological and physico-chemical characterization of catalytic systems, since it provides information on (i) the surface sites at an atomic level, (ii)...

Standoff chemical detection and identification techniques are necessary for ensuring safe exposure to dangerous substances. Molecular fingerprints of unknown chemicals can be measured using wavelength-tunable quantum cascade lasers operating in long-...

Novel iron(II) coordination compounds containing a ligand 2,6-bis(1H-imidazol-2-yl)pyridine (L), having such a composition as [FeL2]SO4·0.5H2O, [FeL2]Br2·H2O, [FeL2](ReO4)2, [FeL2]B10H10∙H2O, [FeL2]B12H12∙1.5H2O had been syn...

Decomposition of N2O on modified zeolites, crystalline titanosilicalites, and related amorphous systems is studied by the catalytic and spectroscopic methods. Zinc-containing HZSM-5 zeolites and titanosilicalites with moderate Ti/Si ratios are shown...

Diffuse reflectance spectroscopy (DRS) has proven to be a powerful, reliable, and non-invasive optical method for characterizing a specimen. Nevertheless, these methods are based on a rudimentary interpretation of the spectral response and can be irr...

The application of Fourier transform infrared spectroscopy to the simultaneous analysis of heavy metal concentration in soil samples was demonstrated in this paper. Two spectral techniques, namely, attenuated total reflectance (ATR) and diffuse refle...

An extensive infrared (IR) spectroscopy study using transmission, specular and diffuse reflectance, and attenuated total reflection (ATR) was undertaken to characterise opal-AG, opal-AN (hyalite), opal-CT and opal-C, focussing on the Si-O fingerprint...

We combine operando diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) with on-line mass spectrometry (MS) to study the correlation between the oxidation state of titania-supported IrO2 catalysts (IrO2@TiO2) and their catalytic acti...

Hydrogenation of bulky aromatic hydrocarbons is an important problem to be solved in order to improve the quality of fuels. Pd-containing catalysts modified by strong acids have been prepared and studied by diffuse-reflectance IR spectroscopy, and th...

A new dinuclear gold(I) complex, possessing a bridging diphosphine ligand (1,2-bis(diphenylphosphino)ethane) and two terminal thiol ligands (1-thioglycerol), was synthesized and fully characterized by IR, 1H and 31P NMR, fluorescence, ESI-mass, and d...

Two series of bimetallic photocatalysts (0.5% Pt/0.01–0.5% IrOx/g-C3N4 and 0.1% Pt/0.01–0.1% IrOx/g-C3N4) were synthesized by the thermolysis of melamine cyanurate and a successive deposition of platinum and iridium labile complexes (Me4N...

A large signal of gas-phase CO overlapping with those of adsorbates is often present when investigating catalysts by operando diffuse reflectance FT-IR spectroscopy. Physically removing CO(g) from the IR cell may lead to a fast decay of adsorbate sig...

The surface species formed during the hydrogenation of CO2 with H2 over a ZrO2-supported Cu catalyst were investigated by operando diffuse reflectance FT-IR spectroscopy at 220 °C and 3 bar. The reactivity of two different formates located on zir...

Binary composite WS2/TiO2 nanofibers (WTN) were elaborated by electrospinning technique. The photocatalytic efficiency of the binary nanofibers was changed via different ratios between WS2 and TiO2. The structural, morphological and optical propertie...

SnO2 nanoparticle production using thermal treatment with tin(II) chloride dihydrate and polyvinylpyrrolidone capping agent precursor materials for calcination was investigated. Samples were analyzed using X-ray diffraction (XRD), Scanning Electron M...

Ziegler–Natta polymerization catalysts were characterized by a complex of surface- and bulk-sensitive methods (DRIFTS, XPS, ESR, and XAS = XANES + EXAFS). A diffuse-reflectance Fourier-transform IR spectroscopy (DRIFTS) study showed the presence of s...

We investigated the interactions between nickel oxide and silica–alumina supports, which were applied to the catalytic oligomerization of ethylene by powder X-ray diffraction, UV diffuse reflectance spectroscopy, H2 temperature-programmed reduc...

Nanosized zeolites with larger external surface area and decreased diffusion pathway provide many potential opportunities in adsorption, diffusion, and catalytic applications. Herein, we report a designer synthesis of ultra-fine Fe-LTL zeolite nanocr...

Nanocrystalline CoWO4 sampled were synthesized using a simple mechanochemical approach and a solid-state reaction, respectively. The formation of nanocrystalline CoWO4 was characterized by X-ray diffraction (XRD) and infrared spectroscopy (IR). The o...

In this work, tetra(4-carboxyphenyl)porphyrin (TCPP) and two Anderson-type polyoxomolybdates (containing Cu and Zn, respectively; CuPOM, ZnPOM) were synthesized and deposited on TiO2 thin films. The properties of the obtained materials were character...

In this work, the nuclear magnetic resonance (NMR) and IR spectroscopic markers of the complexation between 5-fluorouracil (5-FU) and β-cyclodextrin (β-CD) in solid state and in aqueous solution are investigated. In the attenuated total ref...

The Hebrew Scroll, catalogued as Magliabekian Manuscript III 43 and belonging to the National Central Library of Florence (BNCF), is a membranous richly decorated scroll, with colorful depictions of sacred sites through the Holy Land to Lebanon along...

This work reports the interaction study of two supported ionic liquid membranes (SILMs) based on 1-butyl-3-methylimidazolium hexafluorophosphate ([C4mim][PF6]) and 1-butyl-3-methylimidazolium tetrafluoroborate ([C4mim][BF4]), which were impregnated i...

Background: The major in vitro permeation studies are currently performed in Franz-type diffusion cells because of their simplicity, cost effectiveness and because the experimental conditions can be easily controlled. Apart from the skin, Franz-type...

Gas sensors that are based on metal oxides are extensively used to detect gaseous compounds in many different applications. One of the main tasks for improving the sensor performances is to understand the mechanism at the base of the sensing properti...

A series of Bi4O5Br2 photocatalysts were prepared via an innovation method of synthesis with ionic liquids (ILs). The crystal structures were investigated by X-ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FT-IR). The Field Emiss...

A series of composites consisting of g-C3N4 sheet and mesoporous Nb2O5 (mNb2O5) microsphere were fabricated by in situ hydrolysis deposition of NbCl5 onto g-C3N4 sheet followed by solvothermal treatment. The samples were characterized using powder X-...

This study examines the influence of ligand design on the structural, optical, and electrical properties of copper-based coordination complexes. Ligands H2L1 and H2L2 were synthesized via the reaction of 5-nitrosalicylaldehyde with 2-hydroxy- or 4-hy...

Various ZnO nanomaterials such as nanorods, nanoparticles, and nanosheets were synthesized using Salvadora persica leaf extract via the sol–gel method. The prepared nanomaterials possess a large number of nanocavities. The synthesized nanomater...

Advanced 1H Nuclear Magnetic Resonance (NMR) relaxometry and diffusometry methods and VIS-nearIR spectroscopy combined with pH, electrical conductivity (EC) and totally dissolved solids (TDSSs) measurements were used to assess the properties of waste...

Morphological transformations in emulsions of cellulose and polyacrylonitrile (PAN) ternary copolymers containing acrylonitrile, methyl acrylate, and methylsulfonate comonomers in N-methylmorpholine-N-oxide were studied over the entire range of conce...

Tridimensional cubic mesoporous silica, SBA-16, functionalized with aminopropyl groups, were employed as adsorbents for Pb2+ ion removal from aqueous solution. The adsorption capacity was investigated for the effect of pH, contact time, temperature,...

This work investigated the optical characteristics of BaWO4 nanoparticles that were produced through direct mechanochemical synthesis at varying speeds and times. This research expands upon our previous study. We demonstrated that the mechanochemical...

This study reports the synthesis of aluminum-doped ZnO nanoparticles (Al-ZnO NPs) via a top-down mechanochemical solid-state reaction (SSR) approach using high-energy ball milling (HEBM) as a rapid, controllable, and efficient method. Al-ZnO samples...

Interactions between well-mixed fine powders of As2O3, P2O5, MoO3, WO3 and Nb2O5 at different stoichiometry in quartz ampoules under vacuum at ~1000 °C in the presence of metallic molybdenum (or niobium), over several weeks, led to shiny dichroic cry...

S-doped Bi2MoO6 nanosheets were successfully synthesized by a simple hydrothermal method. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM), N2 adsorption...

Scarce platinum group elements (PGE) are mainly concealed in massive sulfides, and finding economically viable ore bodies largely relies on their fast chemical mapping. Most core scanners provide incomplete mineralogical contents, but none also provi...

Understanding the surface chemistry of target gases on sensing materials is essential for designing high-performance gas sensors. Here, we report the effect of Pt-loading on the sensing of volatile organic compounds (VOCs) with ZnO gas sensors, demon...

This work describes the synthesis, characterization, and photocatalytic activity of new composite nanomaterials based on ZnO nanostructures impregnated by lipophlilic porphyrins derived from cashew nut shell liquid (CNSL). The obtained nanomaterials...

In this study, cerium-based metal–organic frameworks (MOFs), cerium terephthalate (CeTPA), were synthesized and incorporated into nanofibers via electrospinning using poly(methyl methacrylate) (PMMA). The synthesized materials were characterize...

Two interpenetrated coordination polymers (CPs) {[Zn1(L)(NO2pbda)]n[Zn2(L)(NO2pbda)]n} (1) and [Zn(L)(Brpbda)]n (2) were prepared by reactions of zinc sulfate heptahydrate with N-donor ligands of 1,4-di(1H-imidazol-4-yl)benzene (L) and auxiliary carb...

Self-assembly of (Bu4N)4[β-Mo8O26], AgNO3, and 2-bis[(2,6-diisopropylphenyl)-imino]acenaphthene (dpp-bian) in DMF solution resulted in the (Bu4N)2[β-{Ag(dpp-bian)}2Mo8O26] (1) complex. The complex was characterized by single crystal X-ray d...

In this study, molybdenum disulfide (MoS2) decorated on graphitic carbon nitride (g-C3N4) heterostructure catalysts at various weight ratios (0.5%, 1%, 3%, 10%, w/w) were successfully prepared via a two-step hydrothermal synthesis preparation method....

In this study, a carboxylated carbon nanotube-grafted Ag3PO4@AgIO4 (CNT-COO−/Ag3PO4@AgIO4) composite was synthesized through an in situ electrostatic deposition method. The synthesized composite was characterized by Fourier transform infrared (...

Perovskite-type oxides lanthanum ferrite (LaFeO3) photocatalysts were successfully prepared by a facile and cost-effective sol-gel method using La(NO)3 and Fe(NO)3 as metal ion precursors and citric acid as a complexing agent at different calcination...

BaMoO4 was obtained via facile mechanochemical synthesis at room temperature and a solid-state reaction. An evaluation of the phase composition and structural and optical properties of BaMoO4 was conducted. The influence of different milling speeds o...

A method for the design and synthesis of a metallopolymer composite (CoNP) based on cobalt nanoparticles using the hyperbranched polyol process was developed. It was shown that hyperbranched polyester polyols in a melted state can be both a reducing...