268 Results Found

Sulfamethoxazole [SMX] and metronidazole [MNZ] are emergent pollutants commonly found in surface water and wastewater, which can cause public health and environmental issues even at trace levels. An efficient alternative for their removal is the appl...

In this research, chitosan–magnetite composites (CS-MNPs) were successfully synthesized using a rapid and easy technique. The materials were characterized by FTIR, XRD, EDX, TEM, VSM, and BET methods. The removal of the antibiotics ciprofloxaci...

Fe–Mn binary oxide nanoparticles (FMBON) were reported to be high performance as adsorbent for pollutants removal from aqueous solution. However, there are still limitations in practice application due to the FMBON tend to aggregate into the mi...

Nanotechnology has received much attention in treating contaminated waters. In the present study, a facile co-precipitation method was employed to synthesize a novel iron and magnesium based binary metal oxide using a stoichiometrically fixed amount...

In this study, simultaneous adsorption of cationic dyes was investigated by using binary component solutions. Thiourea-modified poly(acrylonitrile-co-acrylic acid) (TMPAA) polymer was used as an adsorbent for uptake of cationic dyes (malachite green,...

Biochar modification can enhance the properties associated with porosity and functional groups and has been identified as an effective way to improve adsorption capacity. Modified corncob biochars pretreated by different contents of MgCl2 are obtaine...

This study details the preparation of Fe-Mn binary oxide/mulberry stem biochar composite adsorbent (FM-MBC) from mulberry stems via the multiple activation by potassium permanganate, ferrous chloride, triethylenetetramine, and epichlorohydrin. The ch...

This study reports the synthesis of copper–zinc binary oxide coupled cadmium tungstate through a simple bio-precipitation method followed by calcination at 600 °C and its adsorption application. The characterization analysis reveals that th...

The treatment of contaminated water is currently a major concern worldwide. This work was directed towards the preparation of a composite hydrogel by entrapping cherry stones powder on chitosan, which is known as one of the most abundant natural poly...

The aim of this work is to characterize and evaluate the retention of Cu2+ and Ni2+ from single and binary systems by alginate-Moroccan clay bio-composite with the utilization of calcium chloride as a cross-linking agent, using the ionotropic gelatio...

The surface tensions (σ) of binary solutions of diiodomethane (DIM, 1)–furfural (FA, 2), DIM (1)–N,N-dimethylformamide (DMF, 2), and FA (1)–DMF (2) were determined at 25 °C over the entire bulk composition range, and the s...

The use of pharmaceuticals to treat human and animal diseases has resulted in the increase of antibiotic traces in the water system and soil, thus raising concerns about the environmental aspect. In this study, sodium alginate (SA) and carboxymethyl...

Water treatment alternatives such as adsorption using agricultural residues are currently being studied to eliminate pollutants that cause eutrophication in water bodies, avoiding the alteration of aquatic ecosystems. In this work, two bio-adsorbents...

The chitosan–EDTA modified magnetic biochar (E–CMBC) was successfully used as a novel adsorbent to remove heavy metals. The adsorption behaviour and mechanisms of E–CMBC to Cd2+, Cu2+ and Ni2+ were performed in single and binary system in aqueous sol...

Different antibiotics contained in manure, slurry, wastewater or sewage sludge are spread into the environment. The harmful effects of these antibiotics could be minimized by means of immobilization onto bioadsorbent materials. This work investigates...

Typical porous silica (SBA-15) has been modified with pore expander agent (1,3,5-trimethylbenzene) and fluoride-species to diminish the length of the channels to obtain materials with different textural properties, varying the Si/Zr molar ratio betwe...

Geopolymers show great potential in complex wastewater treatment to improve water quality. In this work, general geopolymers, porous geopolymers and geopolymer microspheres were prepared by the suspension curing method using three solid waste product...

The simulation of carbon dioxide (CO2)-methane (CH4) mixed gas adsorption and the selectivity on zeolite 4A using Aspen Adsorption were studied. The influence of temperature ranging from 273 to 343 K, pressure up to 10 bar and various compositions of...

The studies on the adsorption properties and composition of the adsorbed monolayer at the water–air interface of the binary Kolliphor® ELP (ELP) and Kolliphor® RH 40 (RH40) mixtures based on the measurements of the surface tension (&gam...

This manuscript explores the removal of eosin yellow dye, a toxic color substance contributing to water pollution, from aqueous solutions. For this purpose, iron-zirconia binary oxide (Fe2O3-ZrO2) was functionalized with eugenol oil, a natural phenol...

The salinity influence on the adsorptions of Ni and Zn onto phosphate-intercalated nano montmorillonite (PINM) were investigated. Single adsorption isotherm models fitted the single adsorption data well. The adsorption capacity of Ni was higher than...

NMR solvent relaxation has been used to characterize the surfaces present in binary anionic particle dispersions, before and after exposure to a cationic polymer. In the polymer-free case, it is shown that the measured specific relaxation rate of the...

Agricultural waste materials have been proven to be efficient for heavy metal sequestration from wastewater. In this paper, the interactive effects of initial concentration, adsorbent dosage, and particle size on the removal of copper and lead ions i...

Anaerobically digested sludge-derived biochar was produced through pyrolysis at 700 °C, called BC700. BC700 was characterized using a scanning electron microscope (SEM), X-ray diffractometer (XRD), Fourier-transform infrared spectroscopy (FTIR),...

In this study, orange peel (OP) biochar was used as a bio-sorbent for the removal of copper and lead from wastewater in single and binary systems. The equilibrium and kinetic studies were conducted at a pH value of 5, which was the maximum adsorption...

In this study, a valuable adsorbent was functionalized using commercial ZnO and a mango seed extract (MS-Ext) as a green approach for synthesis. Fourier-transform infrared spectroscopy, transmission electron microscopy, scanning electron microscopy,...

Defluoridation of water was evaluated using a copper–magnesium (Cu-Mg) coated sand (CMCS) as a sustainable adsorbent containing binary metal oxides. The CMCS sorbent coating contained mostly amorphous copper and magnesium oxides in the Cu-Mg co...

Chrysin is a natural bioactive molecule with various groups, and it has been a challenge to separate and enrich chrysin from natural products. Molecularly imprinted polymers have been widely used in the extraction of natural products, but the number...

The hydrogel materials are getting attention from the research due to their multidimensional usage in various fields. Chitosan is one of the most important hydrogels used in this regard. In this paper multifunctional binary graft copolymeric matrices...

In the face of current challenges related to climate change, maintaining the appropriate quality of freshwater becomes crucial. This study examined the effectiveness of removing heavy metals (Cu(II) and Co(II)) using Chlorella vulgaris biosorbents (d...

Reduced graphene oxide loaded with an iron-copper nanocomposite was prepared in this study, using graphene oxide as a carrier and ferrous sulfate, copper chloride and sodium borohydride as raw materials. The obtained material was prepared for elimina...

Recognizing the extreme speeds of reactions with microwaves, anionic forms of surfactants (sodium dodecyl sulfate (SDS) and sodium dodecylbenzenesulfonate (SDBS)) have been intercalated successfully by ion-exchange reactions in binary Li-Al and terna...

This work reports a one-step, green synthesis of silver-micro cellulose nanocomposite (Ag@Ce NCs) using Azadirachta indica A. Juss leaf extract to load micro-cellulose isolated from peanut shells with silver nanoparticles, followed by comprehensive p...

Mixtures of anionic sodium oleate (NaOl) and nonionic ethoxylated or alkoxylated surfactants improve the selective separation of magnesite particles from mineral ores during the process of flotation. Apart from triggering the hydrophobicity of magnes...

The mesoporous zirconia/alumina composites were synthesized via a sol–gel method, followed by heat treatment at 500 °C for 5 h. The effect of the ZrO2/Al2O3 ratio on the structural and textural properties of the obtained composites was expl...

Bisphenol A (BPA) is an extensively produced and consumed chemical in the world. Due to its widespread use, contamination by this pollutant has increased in recent years, reaching a critical environmental point. This work investigates the feasibility...

The liquid-phase adsorption of toluene in cyclohexane and hexane solutions on modified activated carbons was evaluated; the energy involved in the interaction between these solutions and the solids was determined by immersion enthalpies of pure solve...

Dende and babassu coconuts are largely used in tropical countries, namely in Brazil, for the extraction of oils from kernels. The remaining biowastes are industrially processed to produce porous carbons (PCs). PCs derived from dende and babassu biowa...

In designing an optimized activated carbon-based adsorbent, several key factors are crucial for its practical application in the industrial sector, including high BET surface area, strong adsorption capacity, selectivity, mechanical and thermal stabi...

Industrial effluents contaminated with different types of organic dyes have become a major concern to environmentalists due to the carcinogenic nature of the dyes, which are harmful to human and aquatic life. In recent years, the treatment of contami...

This study focuses on Pb2+ and As(V) adsorption on mineral heterostructures based on a mixture of Si, Fe, and Ti oxides (MOHs). Various techniques were performed to analyze the morphological and structural properties of the synthesized metal oxide sa...

A bimetallic organic gel (MOG-Fe/Al) was synthesized through the solvothermal method. The gel state of the product obtained under optimized gel formation conditions is sufficient to carry 2 g of weight for a long time. Scanning electron microscopy (S...

Controlling the geometry and functionality of multi-component self-assembled superstructures on surfaces is a complex task that requires numerous experimental tests. In this contribution, we demonstrate how computer modeling can be utilized to presel...

The simultaneous adsorption of Cu(II) and dyes (MB and MO) on LDH@GO-SH was investigated in single, MB–Cu, and MO–Cu binary systems. The coexistence of dye enhanced the adsorption of Cu(II) by LDH@GO-SH, while the presence of Cu(II) diffe...

The competitive adsorption of bisphenol A (BPA) and17α-ethinylestradiol (EE2) with different endocrine disrupting compounds (EDCs), such as estrone (E1), β-estradiol (E2), and estriol (E3) was investigated in the water-sediment system. The primary an...

Dye wastewater containing bisphenol A (BPA) and dyes as pollutants has not been adequately studied. Our previous study revealed that thermoplastic polyurethane (TPU) nanofiber membranes (NFMs) modified by the addition of polyethyleneimine (PEI) and p...

In this study, expanded graphite (EG) was decorated with manganese oxide nanoparticles (MONPs) by the hydrothermal method, and the newly formed composite (MONPs-EG) was applied as adsorbent for the removal of heavy metals from aqueous solutions. The...

As an environment-friendly material, biochar has been used to remove heavy metals from wastewater, and the development of cost-effective biochar has been an emerging trend. However, limited studies consider the competitive adsorption of co-existing m...

In this study, cladodes of Opuntia ficus indica (OFIC), chemically modified with NaOH (OFICM), have been prepared, characterized, and tested as an effective biomass to remove Pb(II) and/or Cd(II) from aqueous media. At an optimum pH of 4.5, the adsor...

In this work, an experimental and modeling analysis of the adsorption of four aromatic compounds (i.e., toluene, naphthalene, o-xylene and ethylbenzene) onto a commercial activated carbon is carried out. The aim is to assess the suitability of the...