The climate of the Qinghai–Tibet Plateau is distinct. Given the large temperature difference between day and night, drought in perennial years, low rainfall and large evaporation volume, the frozen soil in some areas of the Qinghai–Tibet...
The soil active layer in boreal forests is sensitive to climate warming. Climate-induced changes in the active layer may greatly affect the global carbon budget and planetary climatic system by releasing large quantities of greenhouse gases that curr...
Energy harvesting from cleaner sources and preserving the environment from dangerous gasses are presently the key priorities globally to maintain sustainable development. In this context, photovoltaic technology plays a vital role in generating energ...
Active layer thickness (ALT) is a critical parameter for monitoring the status of permafrost that is typically measured at specific locations using probing, in situ temperature sensors, or other ground-based observations. Here we evaluated the Remote...
Recently, many researchers have made progress in studies aimed at enhancing the power conversion efficiency (PCE) of n-type dye-sensitized solar cells (DSSCs). This paper presents a systematic investigation focused on improving the PCEs of n-type DSS...
Herein, we investigated the effects of active layer thickness (tS) on the electrical characteristics and stability of high-mobility indium–gallium–tin oxide (IGTO) thin-film transistors (TFTs). IGTO TFTs, with tS values of 7 nm, 15 nm, 25 nm, 35 nm,...
Ground-penetrating radar (GPR), due to its efficiency and non-invasive nature, has become an important tool for detecting the permafrost table, overcoming the limited spatial coverage and high costs associated with drilling and in situ temperature mo...
Active layer thickness (ALT) is a sensitive indicator of response to climate change. ALT has important influence on various aspects of the regional environment such as hydrological processes and vegetation. In this study, 57 ground-penetrating radar...
Permafrost is one of the crucial components of the cryosphere, covering about 25% of the global continental area. The active layer thickness (ALT), as the main site for heat and water exchange between permafrost and the external atmosphere, its chang...
Organic solar cells (OSCs) have gained increasing attention. Among the various directions in OSCs, all-polymer solar cells (all-PSCs) have emerged as a highly promising and currently active research area due to their excellent film formation properti...
The primary objective of this research paper is to explore strategies for enhancing the electrical performance of dual active layer thin film transistors (TFTs) utilizing LZTO/ZTO as the bilayer architecture. By systematically adjusting the thickness...
The geospatial model here presented estimates the permafrost active layer thickness (ALT) over the entire Arctic in the last 20 years, and it is based on the spatial and temporal oscillations measured by satellite-based essential variables associated...
Sol-gel processed SnO2 thin-film transistors (TFTs) were fabricated on SiO2/p+ Si substrates. The SnO2 active channel layer was deposited by the sol-gel spin coating method. Precursor concentration influenced the film thickness and surface roughness....
Large rivers are important links between continents and oceans for material flows that have a global impact on marine biogeochemistry. Processes in the catchment areas of large rivers can affect the flow of solutes into the global ocean. The goal was...
In this study, the initial electrical properties, positive gate bias stress (PBS), and drain current stress (DCS)-induced instabilities of amorphous indium gallium zinc oxide (a-IGZO) thin-film transistors (TFTs) with various active layer thicknesses...
Perovskite solar cells (PSCs) have become very popular due to the high efficiencies achieved. Nevertheless, one of the main challenges for their commercialization is to solve their instability issues. A thorough understanding of the processes taking...
Development of gas sensors displaying improved sensing characteristics including sensitivity, selectivity, and stability is now possible owing to tunable surface chemistry of the sensitive layers as well as favorable transport properties. Herein, zin...
The discontinuous permafrost zone is one of the world’s most sensitive areas to climate change. Alaskan boreal forest is underlain by discontinuous permafrost, and wildfires are one of the most influential agents negatively impacting the condition of...
The purpose of this article was to compile four separate digital thematic maps of temperature and ice content of permafrost, the active layer thickness, and cryogenic processes in Yakutia as a basis for assessing changes to modern climate changes and...
In the last two decades in Central Yakutia, there has been a significant change in cryogenic landscapes related to climate warming and anthropogenic disturbances. This period is characterized by the activity of forest fires, which significantly impac...
Thaw consolidation of degrading permafrost is a serious hazard to the safety and operation of infrastructure. Monitoring thermal changes in the active layer (AL), the proportion of the soil above permafrost that thaws and freezes periodically, is cri...
With permafrost warming, the observed discharge of the Kolyma River in northeastern Siberia decreased between 1930s and 2000; however, the underlying mechanism is not well understood. To understand the hydrological changes in the Kolyma River, it is...
The hydrothermal dynamics of the active layer is a key issue in the study of surface processes in permafrost regions. Even though the soil energy budget is controlled by thermal conduction and latent heat transfer, few studies have focused on their e...
Degradation of permafrost with a thin overlying active layer can greatly affect vegetation via changes in the soil water and nutrient regimes within the active layer, while little is known about the presence or absence of such effects in areas with a...
Pipelines are critical infrastructure for Yakutia, transporting vital supplies to communities in this vast northern region. The pipeline routes in central Yakutia traverse areas of ice-rich permafrost that is sensitive to temperature changes. This st...
This paper presents the results of 30 years of permafrost thermal monitoring in the Tiksi area in the eastern Russian Arctic. At a stone ridge site, the mean annual temperatures in the upper 30 m of the ground have increased by 1–2.4 °C com...
The Antarctic Peninsula (AP) region has been one of the regions on Earth with strongest warming since 1950. However, the northwest of the AP showed a cooling from 2000 to 2015, which had local consequences with an increase in snow accumulation and a...
The observed global warming has significant impacts on permafrost. Permafrost changes modify landscapes and cause damage to infrastructure. The main purpose of this study was to estimate permafrost temperatures and active-layer thicknesses during the...
The Qinghai-Tibetan plateau (QTP), also known as the Third Pole and the World Water Tower, is the largest and highest plateau with distinct and competing surface and subsurface processes. It is covered by a large layer of discontinuous and sporadic a...
Permafrost lies close to the surface of the day, therefore, it is able to quickly respond to modern climatic changes. Under these conditions, the goal of understanding the evolution of permafrost in the near future requires monitoring studies of the...
The history of permafrost landscape map compilation is related to the study of ecological problems with permafrost. Permafrost-landscape studies are now widely used in geocryological mapping. Permafrost-landscape classifications and mapping are neces...
Changes in vegetation coverage reflect the status and dynamic processes of ecosystems and serve as a crucial foundation for regional ecological protection. Using Landsat-5 and Sentinel-2 data, this study calculated the vegetation coverage in the Thre...
Alpine permafrost plays a vital role in regional hydrology and ecology. Alpine permafrost is highly sensitive to climate change and human disturbance. The Muri area, which is located in the headwaters of the Datong River, northeast of the Tibetan Pla...
The radioactive gas radon is ubiquitous in the environment and is a major contributor to the human inhalation dose. It is the second leading cause of lung cancer after smoking. Radon concentrations are particularly high in the air of radon-hazardous...
Extensive research on organic solar cells (OSCs) over the past decade has led to efficiency improvements exceeding 18%. Enhancing the efficacy of binary organic solar cells involves multiple factors, including the strategic selection of materials. Th...
This research presents a comprehensive environmental assessment of a small mountain permafrost catchment of the Anmangynda River in the Upper Kolyma Highland (Northeastern Asia) over the period of 2021–2023. The study reveals significant divers...
Surface modification is given vital importance in the biomedical industry to cope with surface tissue growth problems. Conventionally, basic surface treatment methods are used which include physical and chemical deposition. The major drawbacks associ...
Land subsidence, a slow-onset geohazard, poses a severe threat to cities worldwide. However, the lack of quantification in terms of intensity, probability, and hazard zoning complicates the assessment and understanding of the land subsidence risk. In...
Wildfires are one of the most important environmental factors controlling forest ecosystem physiology and the carbon balance in the permafrost zone of North Siberia. We investigated tree-ring width (TRW) and stable isotope chronologies in tree-ring c...
Activation time and discharge time are important criteria for the performance of thermal batteries. In this work a heat transfer analysis is carried out on the working process of thermal batteries. The effects of the thicknesses of heat pellets which...
In this study, an organic bulk heterojunction (BHJ) solar cell with a spiro OMeTAD as a hole transport layer (HTL) and a PDINO as an electron transport layer (ETL) was simulated through the one-dimensional solar capacitance simulator (SCAPS-1D) softw...
To investigate the growth kinetics of the reaction layer and mechanical strength of joined materials, we joined beryllium and reduced-activation ferritic–martensitic steel (F82H) by plasma sintering under various conditions and characterized the join...
In this study, we investigated the characteristics of an organic-inorganic hybrid indirect-type X-ray detector with a CH3NH3PbI3 (MAPbI3) perovskite active layer. A layer with a thickness of 192 nm annealed at 100 °C showed higher absorption, hig...
Low-temperature plasma nitrocarburizing treatments are applied to improve the surface properties of austenitic stainless steels by forming an expanded austenite layer without impairing the excellent corrosion resistance of the steel. Here, low-temper...
In order not to sacrifice nitrided layer thickness and reduce brittle compound layer thickness, Ni-coated pretreatment was carried out with electrodeposition on a pure iron surface, followed by gas nitriding. The brittle compound layer thickness of d...
InAs quantum wells (QWs) are promising material systems due to their small effective mass, narrow bandgap, strong spin–orbit coupling, large g-factor, and transparent interface to superconductors. Therefore, they are promising candidates for th...
In this paper, characterisation of exciton generation is carried out in three bulk-heterojunction organic solar cells (BHJ OSCs)—OSC1: an inverted non-fullerene (NF) BHJ OSC; OSC2: a conventional NF BHJ OSC; and OSC3: a conventional fullerene BHJ OSC...
Ultra-thin solar cells enable materials to be saved, reduce deposition time, and promote carrier collection from materials with short diffusion lengths. However, light absorption efficiency in ultra-thin solar panels remains a limiting factor. Most m...
This work represents an experimental study and mathematical modeling of convective apple slice drying. The influence of multiple process parameters such as temperature, air humidity, air velocity and slice thickness on process kinetics, product water...
The effect of plastic deformation applied to AISI 316L in low-temperature vacuum carburizing without surface activation was investigated. To create a difference in the deformation states of each specimen, solution and stress-relieving heat treatment...
of 24