Heavy-duty diesel vehicles are a significant source of nitrogen oxides (NOx) in the atmosphere. The Selective Catalytic Reduction (SCR) system is a primary aftertreatment device for reducing NOx emissions from heavy-duty diesel vehicles. With increas...
A method is presented to study the decomposition of urea deposited on Cu/HZSM-5 SCR catalysts and therewith the ability of the Cu/HZSM-5 SCR catalyst to be regenerated when being overdosed with SCR urea fluids during operation. This straightforward l...
Spent selective catalytic reduction (SCR) catalysts are hazardous wastes containing many valuable metals whose improper disposal can cause environmental pollution and resource waste. Therefore, it is significant to recover valuable metals from spent...
The importance of the low-temperature selective catalytic reduction (LT-SCR) of NOx by NH3 is increasing due to the recent severe pollution regulations being imposed around the world. Supported and mixed transition metal oxides have been widely inves...
Top tensioned risers (TTRs) and steel catenary risers (SCRs) have been widely used in the field of marine engineering. They are commonly used to transport fluids from subsea wells to surface platforms. Under the action of ocean currents, these risers...
Nanosized SSZ-13 was synthesized hydrothermally by applying N,N,N-trimethyl-1-adamantammonium hydroxide (TMAdaOH) as a structure-directing agent. In the next step, the quantity of TMAdaOH in the initial synthesis mixture of SSZ-13 was reduced by half...
The selective catalytic reduction (SCR) of NOx by NH3 has been extensively studied in the literature, mainly because of its high potential to remediate the pollution of diesel exhaust gases. The implementation of the NH3-SCR process into passenger ca...
SCR still represents the most widely applied technique to remove nitrogen oxides from flue gas from both stationary and mobile sources. The catalyst lifetime is greatly affected by the presence of poisoning compounds in the exhaust gas that deactivat...
One of the most harmful compounds are nitrogen oxides. Currently, the common industrial method of nitrogen oxides emission control is selective catalytic reduction with ammonia (NH3-SCR). Among all of the recognized measures, NH3-SCR is the most effe...
FeVO4 and Fe0.5Er0.5VO4 were prepared and loaded over standard Selective Catalytic Reduction (SCR) supports based on TiO2-WO3-SiO2 (TWS) and redox active supports like CeO2 and CeZrO2 with the aim of finding a suitable formulation for simultaneous so...
To reveal the role of SO3 poisoning in Cu/SSZ-13 NH3-SCR catalysts, fresh and sulfated Cu/SSZ-13 catalysts were prepared in the presence or absence of SO3 flux. The deactivation mechanism is probed by the changes of structural, copper species, and se...
Many researchers have conducted experiments on the position and nozzle conditions in the exhaust pipe of a stage/swirl mixer, as well as the injection position required to satisfy the International Maritime Organisation (IMO) regulations. In this stu...
Aging diesel engines on the road require the development of an after-treatment system to meet current emission regulations, and a reduction in NOx (Nitrogen Oxide) is significant. The SCR (Selective Catalytic Reduction) system is the after-treatment...
Selective catalytic reduction of NO with methane (NO-CH4-SCR) in the presence of excess oxygen was investigated over the synthesized MnH-ZZs-n zeolite composite catalysts with FAU (as core) and BEA (as shell) topologies. XRD, SEM, and NH3-TPD technol...
This work develops a novel compact Silicon-Controlled Rectifier (SCR) model incorporating self-heating effects, extending the conventional Ebers–Moll (E–M) framework for Bipolar Junction Transistors (BJTs) by comprehensively integrating p...
Due to the low temperature and complex composition of the exhaust gas of the marine diesel engine, the working requirements of the selective catalytic reduction (SCR) catalyst cannot be met directly. Moreover, ammonium sulfate, ammonium nitrate, and...
As the main energy source for thermal power generation, coal generates a large amount of NOx during its incineration in boilers, and excessive NOx emissions can cause serious pollution to the air environment. Selective catalytic reduction denitrifica...
The pathways and mechanistic aspects of H2-SCR over precious metal-based catalysts is still under debate. This study focusses on low loaded platinum-based catalysts (0.07–0.3%) in a large temperature range (50–500 °C), with special fo...
Heavy-duty diesel engines in highway use account for more than 40% of total particulate and nitrogen oxide (NOx) emissions around the world. Selective catalytic reduction (SCR) is a method with effective results to reduce this problem. This research...
Selective catalytic reduction (SCR) is widely used to remove nitrogen oxides (NOx) in the flue gas of coal-fired power plants. The accumulation of ash particles inside the SCR-deNOx facility will increase the risk of catalyst deactivation or even dam...
In this work, a nano-structured iron-manganese oxide composite was prepared by calcining natural manganese-rich siderite at different temperatures (450, 500, 550, 600 °C, labeled as H450, H500, H550, H600, respectively), and their performances of...
In this research, hydrofluoric acid (HF) was used as a leaching agent to remove silicon impurities from titanium dioxide powder regenerated from a spent SCR catalyst. Further, the effects of HF concentration, liquid–solid ratio, leaching temper...
Firing of biomass can lead to rapid deactivation of the vanadia-based NH3-SCR catalyst, which reduces NOx to harmless N2. The deactivation is mostly due to the high potassium content in biomasses, which results in submicron aerosols containing mostly...
To reveal the role of impregnated sodium (Na) ions in Cu/SSZ-13 catalysts, Cu/SSZ-13 catalysts with four Na-loading contents were prepared using an incipient wetness impregnation method and hydrothermally treated at 600 °C for 16 h. The physicoch...
Selective catalytic reduction (SCR) is currently one of the most efficient denitration technologies to reduce nitrogen oxide (NOx) emissions of diesel engines. AdBlue (urea water solution, UWS) is the carrier of the reducing agent of SCR, and the spr...
Cu-SSZ-13 has been generally considered as the predominant commercial selective catalytic reduction (SCR) catalyst in the NH3-SCR reaction because of its superior activity and durability. However, in real applications, SCR catalysts readily undergo h...
Urea-Selective Catalytic Reduction (SCR) is widely used to reduce nitrogen oxide (NOx) emissions. This paper presents a comprehensive experimental research work on aftertreatment emissions of NOx and ammonia (NH3) slip for three aftertreatment concep...
LaMnO3 with perovskite structure is a SCR de-NOx catalyst with good performance at low temperatures. In this paper, the SCR reaction process on the 010 surface of LaMnO3 catalyst was studied by DFT method, to guide the development of catalysts and th...
Nitrogen oxides (NOx), one of the major air pollutants, not only are key substances in forming acid rain and photochemical smog, but can also enter the stratosphere and damage the ozone layer to some extent. The selective catalytic reduction (NH3-SCR...
The effects of using CH4 as an assistant reduction agent in plasma-assisted NH3–SCR were investigated. The new hybrid reaction system performed better than DBD–NH3–SCR when the O2 concentration varied from 2% to 12%. Compared with D...
Discarded Waste-SCR (selective catalytic reduction) catalysts not only harm the natural environment, but also hinder the recovery of valuable metals such as V, W, and Ti, thus resulting in a waste of resources. Therefore, it has become imperative to...
The NH3-SCR activities and hydrothermal stabilities of five xCu/MCM-22 zeolites with different Cu loadings (x = 2–10 wt%) prepared by incipient wetness impregnation method were systematically investigated. The physicochemical properties of xCu/...
The byproducts of ammonia-selective catalytic reduction (NH3-SCR) process over MnFe/TiO2 catalysts under the conditions of both with and without SO2 poisoning were analyzed. In addition to the NH3-SCR reaction, the NH3 oxidation and the NO oxidation...
Lean nitric oxide (NOx)-trap (LNT) and selective catalytic reduction (SCR) are efficient systems for the abatement of NOx. The combination of LNT and SCR catalysts improves overall NOx removal, but there is a risk that the SCR catalyst will be expose...
Faults of the selective catalytic reduction (SCR) significantly exacerbate nitrogen oxide (NOx) emissions from heavy-duty vehicles, thereby posing a severe hazard to atmospheric environmental quality. Currently, the paucity of systematic studies on N...
The most effective de-NOx technology in marine diesel applications is the urea-based selective catalytic reduction (SCR) system. The urea-SCR system works by injecting a urea solution into exhaust gas and converting this to NH3 and CO2. The injection...
Low sintering flue gas temperatures and large temperature fluctuations require the development of low-temperature and efficient SCR (selective catalytic reduction) catalysts suitable for the sintering process. It has been shown that modified Mn-Ce/Ti...
In an O2-containing environment, achieving efficient selective catalytic reduction of nitrogen oxides (NOx) by carbon monoxide (CO) using non-noble metal catalysts remains a formidable challenge. To balance the catalytic oxidation of CO and the catal...
Selective catalytic reduction of nitrogen oxides with NH3 (NH3-SCR) was investigated deeper and deeper with poisoning factors such as H2O, SO2, heavy metals, etc. In order to remove the reheating process before the SCR reactor, the application trend...
The application of iron oxide to NH3-SCR is attractive but largely hindered by its poor acid properties, and surface sulfation is proven to be a prominent way of enhancing the acidity. As such, the method of enriching the sulfate species on iron oxid...
The main goal of the study was the development of effective catalysts for the low-temperature selective catalytic reduction of NO with ammonia (NH3-SCR), based on ferrierite (FER) and its delaminated (ITQ-6) and silica-intercalated (ITQ-36) forms mod...
For the National VI heavy-duty diesel vehicles, NOx emission regulations are becoming more and more stringent, and the selective catalytic reduction (SCR) system has become a necessary device. The design of the adblue nozzle in the SCR system is espe...
Selective catalytic reduction (SCR) of NOx by ammonia is one of the dominant pollution abatement technologies for near-zero NOx emission diesel engines. A crucial step in the reduction of NOx to N2 with Cu zeolite NH3-SCR catalysts is the generation...
Cu-exchanged small-pore zeolites have been extensively studied in the past decade as state-of-the-art selective catalytic reduction (SCR) catalysts for diesel engine exhaust NOx abatement for the transportation industry. During this time, Fe-exchange...
Nitrogen oxides (NOx) emissions from diesel vehicles are major contributors to increasing fine particulate matter and ozone levels in China. The selective catalytic reduction (SCR) system can effectively reduce NOx emissions from diesel vehicles and...
In order to keep the ammonia (NH3) slip of the downstream selective catalytic reduction (SCR) system at a low level and simultaneously achieve a high nitrogen oxide (NOX) conversion rate, a Luenberger-sliding mode observer based backstepping control...
This paper proposes a monolithic electrostatic discharge/electrical overstress (ESD/EOS) co-protection device featuring gradual triggering by silicon-controlled rectifier (SCR) and metal–oxide semiconductor (MOS) structures, demonstrating enhan...
Computational fluid dynamics (CFD) are an essential tool for the development of diesel engine aftertreatment systems using selective catalytic reduction (SCR) to reduce nitrous oxides (
Gas turbines operate at exhaust gas temperatures exceeding 500 °C. Vanadium-based catalysts encounter challenges in NH3-SCR denitrification due to vanadium volatilization and titanium dioxide support phase transition at high temperatures. This re...
DeNOx activity in a NSR–SCR hybrid system of two copper-containing chabazite-type zeolitic catalysts was addressed. A Pt-Ba-K/Al2O3 model catalyst was used as the NSR (NOx storage and reduction) catalyst. For the SCR (selective catalytic reduct...
of 27