2023 March-2 - 181 articles
In the field of flexible electronics manufacturing, inkjet printing technology is a research hotspot, and it is key to developing low-temperature curing conductive inks that meet printing requirements and have suitable functions. Herein, methylphenyl...
Few-layer graphene was successfully synthesized on copper foil via chemical vapor deposition with methanol as a carbon source. This was confirmed by optical microscopy observation, Raman spectra measurement, I2D/IG ratio calculation, and 2D-FWHM valu...
As a promising solar absorber material, antimony selenide (Sb2Se3) has gained popularity. However, a lack of knowledge regarding material and device physics has slowed the rapid growth of Sb2Se3-based devices. This study compares the experimental and...
Graphene is an excellent 2D material for vertical organic transistors electrodes due to its weak electrostatic screening and field-tunable work function, in addition to its high conductivity, flexibility and optical transparency. Nevertheless, the in...
An ultrashort-pulse laser inscription of embedded birefringent microelements was performed inside bulk fluorite in pre-filamentation (geometrical focusing) and filamentation regimes as a function of laser wavelength, pulsewidth and energy. The result...
The prolific applicability of nanomaterials has made them a common citizen in biological systems, where they interact with proteins forming a biological corona complex. These complexes drive the interaction of nanomaterials with and within the cells,...
Nanofluids and nanotechnology are very important in enhancing heat transfer due to the thermal conductivity of their nanoparticles, which play a vital role in heat transfer applications. Researchers have used cavities filled with nanofluids for two d...
In this article, we provide an overview of the progress of scientists working to improve the quality of life of cancer patients. Among the known methods, cancer treatment methods focusing on the synergistic action of nanoparticles and nanocomposites...
Two-dimensional (2D) materials have attracted considerable attention due to their potential for generating ultrafast pulsed lasers. Unfortunately, the poor stability of most layered 2D materials under air exposure leads to increased fabrication costs...
Cotton stalks-based biochars were prepared and used to synthetize Ru-supported catalysts for selective production of γ-valerolactone from levulinic acid in aqueous media. Different biochars’ pre-treatments (HNO3, ZnCl2, CO2 or a combinati...
The effects of electrode materials (top and bottom) and the operating ambiances (open-air and vacuum) on the MgFx-based resistive random-access memory (RRAM) devices are studied. Experiment results show that the device’s performance and stabili...
An accurate knowledge of the optical properties of β-Ga2O3 is key to developing the full potential of this oxide for photonics applications. In particular, the dependence of these properties on temperature is still being studied. Optical micro-...
Pyroelectric materials have the ability to convert the environmental cold–hot thermal energy such as day–night temperature alternation into electrical energy. The novel pyro-catalysis technology can be designed and realized on the basis o...
The development of battery-type electrode materials with hierarchical nanostructures has recently gained considerable attention in high-rate hybrid supercapacitors. For the first time, in the present study novel hierarchical CuMn2O4 nanosheet arrays...
High-entropy alloys (HEAs) contain more than five alloying elements in a composition range of 5–35% and with slight atomic size variation. Recent narrative studies on HEA thin films and their synthesis through deposition techniques such as sput...
A novel laser-based method for producing nanocomposite coatings consisting of a tungsten sulfoselenide (WSexSy) matrix and W nanoparticles (NP-W) was developed. Pulsed laser ablation of WSe2 was carried out in H2S gas under appropriate laser fluence...
Industrial pollutants pose a serious threat to ecosystems. Hence, there is a need to search for new efficient sensor materials for the detection of pollutants. In the current study, we explored the electrochemical sensing potential of a C6N6 sheet fo...
Low threshold current and polarization-stabilized 795 nm vertical-cavity surface-emitting lasers (VCSELs) are fabricated by integrating a surface grating of high polarization selectivity and high reflectivity. The rigorous coupled-wave analysis metho...
Two-dimensional van der Waals materials exhibit particularly strong excitonic effects, which causes them to be an exceptionally interesting platform for the investigation of exciton physics. A notable example is the two-dimensional Ruddlesden–P...
Many areas of electronics, engineering and manufacturing rely on ferromagnetic materials, including iron, nickel and cobalt. Very few other materials have an innate magnetic moment rather than induced magnetic properties, which are more common. Howev...
Prevention of bacterial adhesion is a way to reduce and/or avoid biofilm formation, thus restraining its associated infections. The development of repellent anti-adhesive surfaces, such as superhydrophobic surfaces, can be a strategy to avoid bacteri...
Defect chemistry is a branch of materials science that deals with the study of the properties and behavior of defects in crystalline solids [...]
Solitary sound absorbing elements exist; however, their construction is massive and heavy, which largely limits their use. These elements are generally made of porous materials that serve to reduce the amplitude of the reflected sound waves. Material...
The selector is an indispensable section of the phase change memory (PCM) chip, where it not only suppresses the crosstalk, but also provides high on-current to melt the incorporated phase change material. In fact, the ovonic threshold switching (OTS...
Activated carbon fibers (ACFs) as one of the most important porous carbon materials are widely used in many applications that involve rapid adsorption and low-pressure loss, including air purification, water treatment, and electrochemical application...
Titanium and its alloys are widely used in high-end manufacturing fields. However, their low high-temperature oxidation resistance has limited their further application. Recently, laser alloying processing has attracted researchers to improve the sur...
A new type of magnetic nanomaterial with Fe3O4 as the core and organic polymer as the shell was synthesized by seed emulsion polymerization. This material not only overcomes the problem of insufficient mechanical strength of the organic polymer, it a...
In the first part of the review article “General considerations” we give information about conventional flexible platforms and consider the advantages and disadvantages of paper when used in humidity sensors, both as a substrate and as a humidity-sen...
Developing high-performance Si-based light-emitting devices is the key step to realizing all-Si-based optical telecommunication. Usually, silica (SiO2) as the host matrix is used to passivate silicon nanocrystals, and a strong quantum confinement eff...
Herein we investigated hydrophilic surface modification of SiOx containing amorphous hydrogenated carbon nanocomposite films (DLC:SiOx) via the use of atmospheric oxygen plasma treatment. The modified films exhibited effective hydrophilic properties...
Prosthetic joint replacement is the most widely used surgical approach to repair large bone defects, although it is often associated with prosthetic joint infection (PJI), caused by biofilm formation. To solve the PJI problem, various approaches have...
With the improvement of the conversion efficiency of LED chip and fluorescent material and the increasing demand for high-brightness light sources, LED technology has begun to move toward the direction of high-power. However, there is a huge problem...
The primary purpose of this study was to produce an ore-based high-capacity supercapacitor electrode. For this, chalcopyrite ore was first leached with nitric acid, and then metal oxide synthesis was carried out immediately on nickel foam using a hyd...
FeCoNiCrMo0.2 high entropy alloy has many excellent properties, such as high strength, high wear resistance, high corrosion resistance, and high ductility. To further improve the properties of this coating, FeCoNiCrMo high entropy alloy (HEA) coating...
The substrate impurities scattering will lead to unstable temperature-sensitive behavior and poor linearity in graphene temperature sensors. And this can be weakened by suspending the graphene structure. Herein, we report a graphene temperature sensi...
Two-dimensional nanomaterials, particularly layered double hydroxides (LDHs), have been widely applied in the biomedical field owing to their biocompatibility, biodegradability, controllable drug release/loading ability, and enhanced cellular permeab...
Diabetes mellitus and high-fat diets trigger the mechanisms that alter the walls of blood vessels. Gold nanoparticles, as new pharmaceutical drug delivery systems, may be used in the treatment of different diseases. In our study, the aorta was invest...
Structure-sensitive catalyzed reactions can be influenced by a number of parameters. So far, it has been established that the formation of Pd-C species is responsible for the behavior of Pd nanoparticles employed as catalysts in a butadiene partial h...
The one-pot process, which combines the polymerization of polyaniline (i.e., PANI) with subsequent reduction of iron nanowire (i.e., Fe NW) under a magnetic field, was developed to produce Fe@PANI core–shell nanowires. The synthesized nanowires...
Here, we introduce a 2D metal-organic framework (MOF) into the poly(vinylidene fluoride) (PVDF) matrix, which has been comparatively less explored in this field. Highly 2D Ni-MOF has been synthesized in this regard via hydrothermal route and has been...
Over the years, porphyrins have arisen as exceptional photosensitizers given their ability to act as chlorophyll-mimicking dyes, thus, transferring energy from the light-collecting areas to the reaction centers, as it happens in natural photosynthesi...
Research on the rheological performance and mechanism of polymer nanocomposites (PNCs), mainly focuses on non-polar polymer matrices, but rarely on strongly polar ones. To fill this gap, this paper explores the influence of nanofillers on the rheolog...
In the present work, SiO2micro/nanocomposites based on poly-lactic acid (PLA) and an epoxy resin were prepared and experimentally studied. The silica particles were of varying sizes from the nano to micro scale at the same loading. The mechanical and...
Integrating multiple independent functions into a single optical component is one of the most important topics in research on photoelectric systems. In this paper, we propose a multifunctional all-dielectric metasurface that can achieve a variety of...
Bulk nanobubbles (BNBs) have widespread applications in various fields of science due to numerous peculiar characteristics. Despite significant applications, only limited investigations are available on the application of BNBs in food processing. In...
This paper builds on the context and recent progress on the control, reproducibility, and limitations of using graphene and graphene-related materials (GRMs) in biomedical applications. The review describes the human hazard assessment of GRMs in in v...
The increase of global environmental restrictions concerning solid and liquid industrial waste, in addition to the problem of climate change, which leads to a shortage of clean water resources, has raised interest in developing alternative and eco-fr...
The preparation of visible-light-driven photocatalysts has become highly appealing for environmental remediation through simple, fast and green chemical methods. The current study reports the synthesis and characterization of graphitic carbon nitride...
Owing to the high efficiency and specificity in moderate conditions, enzymatic biofuel cells (EBFCs) have gained significant interest as a promising energy source for wearable devices. However, the instability of the bioelectrode and the lack of effi...
The current work is a continuation of our studies focused on the application of nanoparticles of metallic silver (AgNPs) to address the global problem of antibiotic resistance. In vivo, fieldwork was carried out with 200 breeding cows with serous mas...
of 4
