2022 January - 123 articles
The paper is devoted to the study of radiation-induced damage kinetics in beryllium oxide ceramics under irradiation with low-energy helium ions with fluences of 1015–1018 ion/cm2. It was revealed that at irradiation fluences above 1017 ion/cm2...
In this research, a vertical silicon nitride strip-loaded grating coupler on lithium niobate thin film was proposed, designed, and simulated. In order to improve the coupling efficiency and bandwidth, the parameters such as the SiO2 cladding layer th...
Chromium- and cobalt-doped zinc selenide nanoparticles were synthesized using a low-temperature reactive solution growth method. The morphological and optical characteristics were compared to those of doped zinc selenide (ZnSe) bulk crystals grown by...
This article outlines the preparation of manganese-doped copper nanoparticles (Mn + Cu NPs) using Vinca rosea (L.) leaf extract as a convenient and environmentally friendly substance. UV–vis, FT–IR, XRD, SEM–EDAX, and DLS instrumental techniques were...
The goal of the current work was to identify an air-side-optimized contact material for La0.3Ca0.7Fe0.7Cr0.3O3−δ (LCFCr) electrodes and a Crofer22APU interconnect for use in reversible solid oxide fuel cells (RSOFCs). LaNi0.6Co0.4−x...
Perovskite light-emitting diodes (PeLEDs) have attracted tremendous attention due to their ideal optoelectronic properties, such as high color purity, high fluorescence quantum yield, and tunable light color. The perovskite layer plays a decisive rol...
Cement and lime currently are the most common binders in building materials. However, alternative materials and methods are needed to overcome the functional limitations and environmental footprint of conventional products. This Special Issue is enti...
Nanostructured materials with optical transmittance with sufficient electrical conductivity are feasible for the transparent electrical devices and optoelectronic applications. Copper (Cu) possesses inherent superior electrical conductivity. Cu thin...
Facing the problems of ohmic loss and short propagation length, the application of plasmonic waveguides is limited. Here, a triangle hybrid plasmonic waveguide is introduced, where a cylinder silicon waveguide is separated from the triangle prism sil...
Tungsten (W) fiber-reinforced tungsten (Wf/W) composite with ultra-high strength and high-temperature resistance is considered an attractive candidate material for plasma-facing materials (PFM) in future fusion reactors. The main component of Wf/W co...
Understanding how ice nucleates and grows into larger crystals is of crucial importance for many research fields. The purpose of this study was to shed light on the phase and structure of ice once a nucleus is formed inside a metastable water droplet...
The flame brazing of H62 brass using a novel, low-silver Cu-P brazing filler metal was investigated in this study. The effect of the addition of a trace amount of Sn on the microstructure and properties of Cu-7P-1Ag filler metals was analyzed by mean...
This Special Issue on “Nano/Micro and Bio-Inspired Materials on Wide-Bandgap-Semiconductor-Based Optoelectronic/Power Devices” is a collection of 20 original articles dedicated to theoretical and experimental research works providing new...
The perovskite solar cell (PSC) as an emerging and promising type has been extensively studied. In this study, a model for a PSC prepared in ambient air was established by using SCAPS-1D. After that, it was further analyzed through varying the defect...
Modeling the self-sustained high-temperature synthesis (SHS) reaction via thermal dilution and transformation of the reaction heterogeneous media into a moderate exothermic one has unlimited potential for designing inorganic powders of a certain morp...
Nitrogen-containing 0Cr19Ni10 (304 NG) austenitic stainless steel plays a significant role in Generation IV reactor pressure vessels. The structure and properties of 304 NG are heavily influenced by the grain boundaries (GBs), especially the initial...
The present work highlights a new general method devoted to computations of the clamped linear electro-optical coefficients from the measured fundamental vibrational frequencies and the nonlinear dielectric susceptibility constants. The calculations...
Three Cd(II) coordination complexes with unique structures and topologies, namely, {[Cd(tttmb)(Hbtc)]·5H2O}n (1), {[Cd(tttmb)(m-phda)(H2O)]·2H2O}n (2), and {[Cd(tttmb)(o-cpla)]·(CH3CN)·(H2O)1.5}n (3), have been successfull...
This review discusses an area of expertise that is at the intersection of three large parts of materials science. These are phase transformations, severe plastic deformation (SPD), and high-entropy alloys (HEA). First, SPD makes it possible to determ...
In this work, coal fly ash, hereinafter CFA is proposed to work as raw material for immobilization of Sr-contaminated soil by microwave sintering in the path towards resource utilization of solid waste. The immobilization mechanism and performance wa...
We have theoretically demonstrated an efficient way to improve the optical properties of an anti-reflection coating (ARC) and an intermediate reflective layer (IRL) to enhance tandem solar cell efficiency by localizing the incident photons’ ene...
Numerous investigations on the development of the relaxor-PbTiO3 ferroelectric crystals have been carried out since their extraordinary properties were revealed. Recent developments on these crystals have offered further advances in electromechanical...
In the quasi-binary system CaNi2-MgNi2 solid-solutions CaxMg1−xNi2 (0 ≤ x ≤ 1) were prepared from the elements. They crystallize in the hexagonal Laves phase type (MgNi2, C36) for x ≤ 0.33 (P63/mmc, a = 482.51(7) pm, c = 1582.1(3) pm f...
The mechanical properties of high-entropy alloys are superior to those of traditional alloys. However, the key problem of finding a strengthening mechanism is still challenging. In this work, the molecular dynamics method is used to calculate the ten...
Protein and DNA co-crystals are most commonly prepared to reveal structural and functional details of DNA-binding proteins when subjected to X-ray diffraction. However, biomolecular crystals are notoriously unstable in solution conditions other than...
Metal-oxygen bonding of the Ce-doped LaCoO3 system remains largely unexplored despite extensive studies on its magnetic properties. Here, we investigate the structure and local structure of nanoscale La1−xCexCoO3, with x = 0, 0.2, and 0.4, usin...
The interfacial mechanics and electrical properties of SiC reinforced copper matrix composites were studied via the first principles method. The work of adhesion (Wad) and the interfacial energies were calculated to evaluate the stabilities of the Si...
Composite additives have an important influence on the process of metal electrodeposition and the quality of a metal deposited layer. In this work, the additive thiourea (TU) was compounded with cetyltrimethyl ammonium chloride (CTAC), sodium dodecyl...
Using first-principles molecular dynamics (FPMD) simulations at atmospheric pressure and 300 K, we investigated the adsorption of the molecules CO and CO2 on each of the surfaces of the 2D materials MoP2 and NbP2. We found that both surfaces adsorbed...
Leishmaniasis is a neglected parasitic disease caused by various Leishmania species. The discovery of new protozoa drugs makes it easier to treat the disease; but, conventional clinical issues like drug resistance, cumulative toxicity, and target sel...
A gene encoding LgEstI was cloned from a bacterial fish pathogen, Lactococcus garvieae. Sequence and bioinformatic analysis revealed that LgEstI is close to the acetyl esterase family and had maximum similarity to a hydrolase (UniProt: Q5UQ83) from A...
Here, we report the synthesis and experimental characterization of three drug-drug eutectic mixtures of drug aminoglutethimide (AMG) with caffeine (CAF), nicotinamide (NIC) and ethenzamide (ZMD). The eutectic mixtures i.e., AMG-CAF (1:0.4, molar rati...
Circulating Fluidized Bed (CFB) combustion is a clean technology for burning, with advantages of adapting to a large variety of fuel, high combustion efficiency, lower NOx emissions, and stable operation. The residue collected from the ash-hoppers of...
The physics of quantum many-body systems have been studied using bulk correlated materials, and recently, moiré superlattices formed by atomic bilayers have appeared as a novel platform in which the carrier concentration and the band structure...
Polyaniline/Zinc oxide (PANI/ZnO) were prepared using a two-step method, and the morphology and the structure of PANI/ZnO composites were characterized through a scanning electron microscope (SEM) and X-ray diffraction (XRD). Factors such as the cont...
Zinc selenide (ZnSe) nanomaterial is a binary semiconducting material with unique features, such as high chemical stability, high photosensitivity, low cost, great excitation binding energy, non-toxicity, and a tunable direct wide band gap. These cha...
To improve the electrocatalytic properties for hydrogen evolution reactions, strategies need to be adopted, such as increasing specific surface area and active site, as well as decreasing interface energy. Herein, we report the preparation of FeP on...
The compound 0.9[KNbO3]-0.1[(BaNi1/2Nb1/2O3−δ] (KBNNO), a robust eco-friendly (lead-free) ferroelectric perovskite, has diverse applications in electronic and photonic devices. In this work, we report the dielectric, ferroelectric, and st...
The increased advancement in nanosciences in recent times has led to fascinating innovations. It has potential applications for altering the structural, surface, and physicochemical properties of nano-ranged metamaterials. The adaptable optical, stru...
Ultrawide bandgap (UWBG) semiconductor materials, with bandgaps far wider than the 3.4 eV of GaN, have attracted great attention recently. As a typical representative, wurtzite aluminum nitride (AlN) material has many advantages including high electr...
As Nb films are widely used as superconducting electrodes of Josephson junctions, it is important to investigate the properties of Nb films in order to fabricate high-quality Josephson junctions. In this work, we conducted a comprehensive analysis of...
The relationship between depositing temperature and crystallinity of grain for HgI2 polycrystalline film with 170 cm2 in area deposited by Physical Vapor Deposition (PVD) was investigated, considering the matches with readout matrix pixelation for fe...
A UV Nonlinear optical (NLO) crystal is one of the key devices in all-solid-state laser technology, and borate halides show outstanding potential due to their abundant structural diversity and short UV cut-off edges. In this article, the sizable UV N...
TiB2-BN composite ceramics combine excellent electrical conductivity, thermal shock resistance, high-temperature resistance, corrosion resistance, and easy processing of TiB2 and BN. However, in practical applications, their high-temperature oxidatio...
Drop-weight tests were conducted to investigate the impact-initiation sensitivity of high-temperature PTFE-Al-W reactive materials. The test results show that the impact-initiation sensitivity of the materials more than doubles with increasing the sa...
The article is dedicated to the study of the phase formation processes in Li2ZrO3 ceramics obtained by the method of solid phase synthesis. Interest in these types of ceramics is due to their great potential for use as blanket materials in thermonucl...
In this work, ZnO nanocrystals (NCs) have been effectively synthesized by a simple, efficient and cost-effective method using coconut husk extract as a novel fuel. The synthesized NCs are characterized by UV-Vis, XRD, FT-IR, SEM, EDX, Raman and PL st...
High-strength low-alloy (HSLA) steel is used in important steel structural members because of its strength and plastic toughness. Q960 steel is HSLA steel obtained by adding an appropriate amount of alloy elements and quenching and tempering treatmen...
The present article investigates heat transfer and pseudoplastic nanomaterial liquid flow over a vertical thin cylinder. The Buongiorno model is used for this analysis. The problem gains more significance when temperature-dependent variable viscosity...
Cyclic tension of (100)[001]-oriented single-crystal aluminum foils with the frequency 5 Hz forms a tweed pattern. Its period is several microns and increases by a factor of 1.5 in the temperature range 233–363 K. A model is proposed for struct...
of 3
