221 Results Found

We fabricated one fibrous-membrane type of flexible and lightweight supported catalyst via loading platinum–nickel nanoparticles (PtNi NPs) directly on the polydopamine-coated polymethylmethacrylate electrospun-fibers (PMMA@PDA). The polymer su...

Nanoparticles of platinum-group metals (PGM) on carbon supports are widely used as catalysts for a number of chemical and electrochemical conversions on laboratory and industrial scale. The newly emerging field of single-atom catalysis focuses on the...

In this work, the liquid phase hydrogenation of furfural has been studied using a biochar-supported platinum catalyst in a batch reactor. Reactions were performed between 170 °C and 320 °C, using 3 wt % and 5 wt % of Pt supported on a maple-based bio...

Catalysts increase reaction rates; however, the surface area to volume ratio of catalysts has a vital role in catalytic activity. The noble metals such as platinum (Pt) and gold (Au) are expensive; despite this, they have proven their existence in ca...

Eugenol, used as bio-phenol, was designed to replace the hydrogen atom of hydrogenterminated siloxane by hydrosilylation reaction under the presence of alumina-supported platinum catalyst (Pt-Al2O3), silica-supported platinum catalyst (Pt-SiO2) and c...

Graphene-like materials have attracted significant attention as alternative catalyst carriers due to the broad possibilities of changing their shape, composition, and properties. In this study we investigated the structural and electrochemical charac...

The fundamental chemistries and electronic structures of platinum catalysts over nitrogen-doped carbon supports were examined to determine the subtle yet important roles graphitic defect-based and pyridinic defect-based nitrogen defects have in stabi...

How important is the support during the rational design of a catalyst? Herein, doped ceria (Zr; Pr and Tb) was used as an active support to prepare Pt catalysts (0.5 wt%) for glycerol selective oxidation. A thorough characterization of achieved catal...

To improve the activities of non-noble metal catalysts is highly desirable and valuable to the reduced use of noble metal resources. In this work, the supported nickel (Ni) and nickel-platinum (NiPt) nanocatalysts were derived from a layered double h...

Platinum (Pt)-based electrocatalysts supported by reduced graphene oxide (RGO) were synthesized using two different methods, namely: (i) a conventional two-step polyol process using RGO as the substrate, and (ii) a modified polyol process implicating...

Despite providing interesting solutions to reduce the number of synthetic steps, to decrease energy consumption or to generate less waste, therefore contributing to a more sustainable way of producing important chemicals, the expansion of the use of...

A range of catalysts comprising of platinum supported on silica, prepared by an impregnation method, have been studied for the total oxidation of naphthalene, which is a representative Polycyclic Aromatic Hydrocarbon. The influence of platinum loadin...

Bismuth plays important roles in promoting the oxidation of alcohols towards high-value-added chemicals over a noble metal loading catalyst. Herein, Mg–Al hydrotalcite-supported platinum–bismuth nanoparticles (Pt–Bi/HT) were prepared by the co-impreg...

The limitations of TiO2 as a photocatalyst such as the larger bandgap energy, which only activates under the UV region, give a lower photocatalytic activity. This study reports the role of the N and Pt co-dopant on the modification of the TiO2 photoc...

Recently there has been a great interest in covalent organic frameworks due to their fascinating properties. Current approaches to improve their hydrolytic stability mainly rely on the transformation of the dynamic bonds into strong and irreversible...

Pt-Pd catalyst supported on nitrogen-doped carbon nanofiber (N-CNF) was prepared and evaluated as a cathode electrode of the direct methanol fuel cell (DMFC). The N-CNF, which was directly synthesized by the catalytic chemical vapor deposition from a...

Catalyst layers made from novel catalysts must be fabricated in a way that the catalyst can function to its full potential. To characterize a PtNi alloy catalyst for use in the cathode of Direct Methanol Fuel Cells (DMFCs), the effects of the manufac...

Direct methanol fuel cells (DMFCs) represent a promising pathway for energy conversion, yet their reliance on platinum-group metal (PGM)-based anode catalysts poses critical sustainability challenges, which stem from finite mineral reserves, environm...

Catalytic performance and moisture and sulfur dioxide resistance are important for a catalyst used for the oxidation of volatile organic compounds (VOCs). Supported noble metals are active for VOC oxidation, but they are easily deactivated by water a...

Catalysts for the oxygen reduction reaction (ORR) in PEM fuel cells are commonly constituted of Pt-based nanoparticles and a carbon support originating from fossil resources. In order to employ a more sustainable carbon support, activated sawdust was...

Pt nanoparticles and a CeMnOx composite were loaded on the surface of the natural diatomite material to generate the Pt/CeMnOx/diatomite using the redox precipitation and impregnation methods. The physicochemical properties of the catalysts were char...

Benzene is a potentially carcinogenic volatile organic compound (VOC) and its vapor must be strictly monitored in air. Metal–oxide semiconductors (MOS) functionalized by catalytic noble metals are promising materials for sensing VOC, but basic...

Nowadays, the oxidation activity at the low-temperature regime for Co3O4 catalysts needs to be improved to meet the stringent regulation of multi-pollutant diesel exhaust. Herein, nanoflower-like Co3O4 diesel oxide catalysts (DOCs) were fabricated wi...

The durability of low temperature proton exchange membrane fuel cell (PEMFC) catalysts crucially affects their lifetime. The choice of carbon support is important in terms of increasing the stability of catalysts. In this research, Pt/C samples were...

A container used in contact lens cleaning requires a Pt plating weight of 1.5 mg for H2O2 decomposition although Pt is an expensive material. Techniques that decrease the amount of Pt are therefore needed. In this study, Pt nanoparticles instead of P...

In a previous study, Pt nanoparticles were supported on a substrate of acrylonitrile–butadiene–styrene copolymer (ABS) to give the ABS surface catalytic activity for H2O2 decomposition during contact lens cleaning. Although the Pt-particl...

Herein, α-MnO2-supported Pt-Pd bimetal (xPd-yPt/α-MnO2; x and y are the weight loadings (wt%) of Pd and Pt, respectively; x = 0, 0.23, 0.47, 0.93, and 0.92 wt%; and y = 0.91, 0.21, 0.46, 0.89, and 0 wt%) catalysts were prepared using the...

The effect of nitrogen doped bamboo-like carbon nanotubes (N–CNTs) on the properties of supported platinum (0.2 and 1 wt %) catalysts in formic acid decomposition for hydrogen production was studied. It was shown that both impregnation and homo...

Platinum is widely used as a reduction promoter in transition metal heterogeneous catalysts, while its effects on the catalyst’s properties and CO hydrogenation behavior remain unclear. In this study, an improvement in the reducibility of plati...

The behavior of supported alloyed and de-alloyed platinum-copper catalysts, which contained 14–27% wt. of Pt, was studied in the reactions of methanol electrooxidation (MOR) and oxygen electroreduction (ORR) in 0.1 M HClO4 solutions. Alloyed Pt...

Graphene oxide (GO), reduced graphene oxide by thermal treatment (rGO-TT), nitrogen-modified rGO (N-rGO), and carbon Vulcan were synthesized and employed in the current work as catalyst support for Pt nanoparticles, to study their properties and impa...

A set of physicochemical methods, including X-ray photoelectron spectroscopy (XPS), X-ray diraction, electron microscopy and X-ray absorption spectroscopy, was applied to study Pt/TiO2 catalysts prepared by impregnation using a commercial TiO2-P25 su...

Properties of a novel catalytic material, Pt/N-graphene, in gas-phase decomposition of formic acid to obtain pure hydrogen were studied. The graphene powder doped with nitrogen atoms was used as the carbon support. The following methods were used to...

Platinum and platinum-based catalysts are some of the most effective catalysts used in fuel cells. However, electrocatalysts used for direct liquid fuel cells (DLFCs) and electrolyzers are high cost and suffer from several other problems, thus hinder...

Spacecraft have monopropellant thruster systems for attitude control in the vacuum of space. Hydroxylamine nitrate is a green propellant that has high performance and low toxicity. Owing to the high adiabatic decomposition temperature of the hydroxyl...

Structured catalytic membranes with high porosity and a low pressure drop are particularly suitable for industrial processes carried out at high space velocities. One of these processes is the catalytic total oxidation of volatile organic compounds,...

Granulated carbon nanotube-supported palladium and platinum-containing catalysts were developed. By using these, remarkable catalytic activity was achieved in chlorate ion hydrogenation. Nitrogen-doped bamboo-like carbon nanotubes (N-BCNTs) loaded ge...

Ammonia has attracted much interest as a potential green and renewable hydrogen carrier or energy vector. Compared to hydrogen, ammonia offers several advantages. For example, ammonia has a significantly higher energy density and can be liquefied at...

Direct liquid fuel cells are very appealing alternatives for fighting climate change, particularly in the field of personal mobility solutions. This is especially true for direct methanol fuel cells (DMFCs) that use and burn safe fuels that are readi...

In this study, we analyzed the durability of the commercial Pt/C catalysts with platinum loading of 20% and 40% using two different accelerated durability tests, i.e., using Ar or O2 when bubbling the electrolyte during testing. The structural analys...

The strategic importance of platinum and palladium, two platinum-group metals (PGMs), is particularly supported by their technological applications, one of the most relevant being the role they perform as catalysts for several sorts of chemical react...

Al2O3-TiO2 systems with Ti:Al 0.1, 0.5 and 1.0 molar ratio obtained by the sol–gel method have been used as a platinum support. As a precursor of alumina gel, aluminum isopropoxide has been chosen. Titanium tert-butoxylate was applied to obtain...

Platinum catalysts loaded on a hybrid support, composed of HZSM-48 and pseudoboehmite, were applied to the synthesis of benzene through methylcyclopentane (MCP) reforming in order to investigate the effect of the addition of pseudoboehmite to Pt/HZSM...

Platinum (Pt) nanoparticles are deposited on a hybrid support (C-MnO2) according to a polyol method. The home-made catalyst, resulted as Pt/C-MnxO1+x, is compared with two different commercial platinum based materials (Pt/C and PtRu/C). The synthesi...

In order to obtain highly active catalytic materials for oxidation of carbon monoxide and volatile organic compounds (VOCs), monometallic platinum, copper, and palladium catalysts were prepared by using of two types of ZSM-5 zeolite as supports—paren...

Alloys of platinum and lanthanides present a remarkable activity for the oxygen reduction reaction—both in the form of extended surfaces and nanoparticulate catalysts. Co-sputter-deposited thin film catalysts based on platinum and gadolinium sh...

New highly active electrocatalysts were obtained by depositing bimetallic Pt-Cu nanoparticles on the surface of an N-doped carbon support. The structural–morphological characteristics and electrochemical behavior of the catalysts were studied....

We have investigated platinum catalysts containing iron as a modifier to obtain catalysts with superior electrocatalytic activity toward glycerol electro-oxidation in an alkaline medium. The electrocatalysts, supported on carbon Vulcan, were synthesi...

Platinum catalysts supported on carbon xerogel and carbon black (Vulcan) were synthesized with the aim of investigating the influence of the characteristics of the support on the electrochemical performance of the catalysts. Three synthesis methods w...

Studying the ORR activity of platinum-based electrocatalysts is an urgent task in the development of materials for proton-exchange membrane fuel cells. The catalytic ink composition and the formation technique of a thin layer at the RDE play a signif...