153 Results Found

A broad compositional range of Nb-Ti anodic memristors with volatile and self-rectifying behaviour was studied using a combinatorial screening approach. A Nb-Ti thin-film combinatorial library was co-deposited by sputtering, serving as the bottom ele...

Here, we propose a Pt/HfO2/TaOx/TiN artificial synaptic device that is an excellent candidate for artificial synapses. First, XPS analysis is conducted to provide the dielectric (HfO2/TaOx/TiN) information deposited by DC sputtering and atomic layer...

Resistive random-access memory has emerged as a promising non-volatile memory technology, receiving substantial attention due to its potential for high operational performance, low power consumption, temperature robustness, and scalability. Two-dimen...

Herein we report on a facile sol-gel spin-coating technique to fabricate ZnO thin films that grow preferentially along the (002) plane on FTO substrates. By employing the magnetron sputtering technique to deposit a tungsten (W) top metal electrode on...

Titanium anodic memristors were prepared in phosphate buffer (PB) and citrate buffer (CB) electrolytes. Studying their I-U sweeps, the memristors presented self-rectifying and volatile behaviors. Transmission electron microscopic analysis revealed cr...

Energy-efficient computing paradigms beyond conventional von-Neumann architecture, such as neuromorphic computing, require novel devices that enable information storage at nanoscale in an analogue way and in-memory computing. Memristive devices with...

The use of multi-band matching for rectifiers leads to design complexity. Instead, recent advancements suggested self-matched branches combined in parallel to enable multi-band operation. However, this method controls only the imaginary part. In this...

A novel 2.45 GHz self-adaptive rectifier with high efficiency and a wide input power range is proposed in this paper. It consists of a high-power sub-rectifier branch, a low-power sub-rectifier branch, an impedance transform and isolation network (IT...

An RF–DC rectifier is an important part in a wireless power transfer system. Diode-based rectifiers are widely used in low-power harvesting scenarios, and for high power, a transistor based on the time-reversal duality was proposed. This paper...

Self-supervised monocular depth estimation, which has attained remarkable progress for outdoor scenes in recent years, often faces greater challenges for indoor scenes. These challenges comprise: (i) non-textured regions: indoor scenes often contain...

Triboelectric nanogenerators (TENGs) offer intrinsically high open-circuit voltages in the kilovolt range; however, conventional diode rectifier interfaces clamp the voltage prematurely, restricting access to the high-energy portion of the mechanical...

In this work, we demonstrate P3HT (poly 3-hexylthiophene) organic rectifier diode both in rigid and flexible substrate with a rectification ratio up to 106. This performance has been achieved through tuning the work function of gold with a self-assem...

A direct bidirectional current discharge path between the input/output (I/O) and ground (GND) is essential for the robust protection of charging device models (CDM) in the tightly constrained design parameters of advanced low-voltage (LV) processes....

To decrease the complexity and increase the efficiency of wireless power transfer (WPT) systems, this paper proposes a novel self-excited invert rectification method for the design of the invert rectifier of the receiver (Rx). The self-excited invert...

A metal–insulator–metal-structured Ag-filament-based transparent threshold switch is developed as a selector device for a crossbar array, which can lead to high-density integration of advanced memory devices. Both threshold switching and...

This paper proposes a self-supplied power management system to efficiently rectify and regulate the AC voltage received from wireless power transmission techniques to power or recharge biomedical devices. The proposed power management system comprise...

This paper presents a comprehensive summary of recent advances in circuit topologies for piezoelectric energy harvesting, leading to self-powered systems (SPSs), covering the full-bridge rectifier (FBR) and half-bridge rectifier (HBR), AC-DC converte...

This paper presents a high-efficiency inductorless self-controlled rectifier for piezoelectric energy harvesting. High efficiency is achieved by discharging the piezoelectric device (PD) capacitance each time the current produced by the PD changes po...

This paper presents a switchable self-bias polarity on the CMOS complementary cross-coupled rectifier to improve the rectifier’s power conversion efficiency (PCE) profile across a wide input power (PIN) dynamic range. This technique achieves th...

Here, we present evidence of self-compliant and self-rectifying bipolar resistive switching behavior in Ni/SiNx/n+ Si and Ni/SiNx/n++ Si resistive-switching random access memory devices. The Ni/SiNx/n++ Si device’s Si bottom electrode had a higher do...

The rapid growth of wireless technology has improved the network’s technology from 4G to 5G, with sub-6 GHz being the centre of attention as the primary communication spectrum band. To effectively benefit this exclusive network, the improvement...

Tupperwave is a wave energy device based on the Oscillating-Water-Column (OWC) concept. Unlike a conventional OWC, which creates a bidirectional air flow across the self-rectifying turbine, the Tupperwave device uses rectifying valves to create a smo...

We propose a self-training scheme, SURABHI, that trains deep-learning keypoint detection models on machine-annotated instances, together with the methodology to generate those instances. SURABHI aims to improve the keypoint detection accuracy not by...

Systems based on the oscillating water column (OWC) principle are often equipped with Wells turbines as power take-offs (PTOs) to convert sea-wave energy. The self-rectifying nature of the Wells turbine represents a strength for such applications, wh...

The Double Decker Turbine (DDT) is a recent design introduced for oscillating water column (OWC) devices. Its major contribution is the combination of two typical solutions in just one prototype: a self-rectifying performance, to deal with the bidire...

Advancing neuromorphic computing technology requires the development of versatile synaptic devices. In this study, we fabricated a high-performance Al/LiNbO3/Pt memristive synapse and emulated various synaptic functions using its primary key operatin...

In this study, a complete model for a miniature excitation-powered piezoelectric generator (PG), analysis modes of operation and control of a full-bridge joule thief (FBRJT) circuit to identify the optimal points were investigated. The proposed model...

A cross-flow air turbine, which is a self-rectifying, air-driven turbine, was designed and proposed for the power take-off (PTO) system of an oscillating water column (OWC) wave energy converter (WEC). To predict the complicated non-linear behavior o...

A memristor is a fundamental electronic device that operates like a biological synapse and is considered as the solution of classical von Neumann computers. Here, a fully printed and flexible memristor is fabricated by depositing a thin film of metal...

The Tupperwave device is a closed-circuit oscillating water column (OWC) wave energy converter that uses non-return valves and two large fixed-volume accumulator chambers to create a smooth unidirectional air flow, harnessed by a unidirectional turbi...

Piezoelectric Vibration converters are nowadays gaining importance for supplying low-powered sensor nodes and wearable electronic devices. Energy management interfaces are thereby needed to ensure voltage compatibility between the harvester element a...

This paper describes the detailed modelling of a vibration-based miniature piezoelectric device (PD) and the analysis modes of operation and control of a voltage doubler boost converter (VDBC) circuit to find the PD’s optimal operating conditio...

In this paper, a QR flyback converter using a self-driven active snubber (SDAS) was proposed to solve the problem of voltage surge in the switch of QR flyback converters. In the proposed converter, the SDAS consisting of a clamping capacitor and an a...

Miniaturised piezoelectric devices are emerging energy harvesting sources that are appropriate for various implantable and wearable applications. However, these piezoelectric devices exhibit considerable internal resistance due to their internal impe...

Ferrocenes have recently been reported as components of a number of molecular circuits. This short review covers reports of ferrocenes in molecular rectifiers and diodes which have appeared in the last 10 years.

Harvesting energy from human motion for powering small scale electronic devices is attracting research interest in recent years. A piezoelectric device (PD) is capable of harvesting energy from mechanical motions, in the form of alternating current (...

The Oscillating Water Column (OWC) is the most promising self-rectifying device for power generation from ocean waves; over the past decade, its importance has been rekindled. The bidirectional airflow inside the OWC drives the Wells turbine connecte...

Herein, we present the design technique of a resonant rectifier for piezoelectric (PE) energy harvesting. We propose two diode equivalents to reduce the voltage drop in the rectifier operation, a minuscule-drop-diode equivalent (MDDE) and a low-drop-...

This paper presents a novel adaptive reconfigurable rectifier architecture for radio frequency energy harvesting (RFEH); in addition, a new metric for high-efficiency dynamic range (DR) is proposed. The presented rectifier architecture is based on a...

THz detection in a silicon structure can be an effective instrument not only for image detection, and material and gas sensing, but also for communications. Next-generation 6G communications assume the possibility of achieving a large-band transmissi...

This work presents some accurate guidelines for the design of rectifier circuits in radiofrequency (RF) energy harvesting. New light is shed on the design process, paying special attention to the nonlinearity of the circuits and the modeling of the p...

In the context of the Internet of Things, billions of devices—especially sensors—will be linked together in the next few years. A core component of wireless passive sensor nodes is the rectifier, which has to provide the circuit with suff...

This paper presents a wide dynamic-range CMOS rectifier with high efficiency and high sensitivity for RF energy harvesting. A new adaptive-biasing scheme is implemented using stacking diodes with dynamic threshold voltage to mitigate the reverse-leak...

In the current digital landscape, artificial intelligence-driven automation has revolutionized efficiency in various areas, enabling significant time and resource savings. However, the reliability and efficiency of software systems remain crucial cha...

A self-powered device for human activity monitoring and energy harvesting for Internet of Things (IoT) devices is proposed. The self-powered device utilizes flexible Nano-generators (NGs), flexible diodes and off-the-shelf capacitors. During footstep...

Low-power energy harvesting has been demonstrated as a feasible alternative for the power supply of next-generation smart sensors and IoT end devices. In many cases, the output of kinetic energy harvesters is an alternating current (AC) requiring rec...

A self-supplied circuit that is able to significantly increase the power delivered to a bridge rectifier by a Resonant Piezoelectric Vibration Energy Harvester (RPVEH) is presented and discussed. The proposed circuit, called the Energy Harvester Powe...

Metal–oxide–semiconductor field-effect transistors (MOSFETs) have proven to be effective devices for rectifying electromagnetic radiation at extremely high frequencies, approximately 1 THz. This paper presents a new interpretation of the...

In this paper, we proposed a novel dual-band circularly polarized rectifier antenna for collecting environmental electromagnetic energy at 2.4 and 5.8 GHz. The receiving antenna is a circularly polarized microstrip slot antenna that achieves circular...

This paper presents a piezoelectric (PE) energy harvesting circuit based on the DSSH (double synchronized switch harvesting) principle. The circuit consisted of a rectifier and a DC–DC circuit, which achieves double synchronized switch operatio...