To increase the density of the micro-arc oxide coating, AA 1060 samples were pretreated with an anodic oxide film in an oxalic acid solution. Plasma electrolytic oxidation (PEO) was performed to investigate the effect of the thickness of the pre-anod...
In the current investigation, micro-arc oxidation (MAO) ceramic coatings on aluminum are galvanostatically synthesized at various processing stages in an alkaline silicate system. The resultant coatings are systematically investigated in terms of the...
This study investigates the corrosion resistance of EN AW 6060 aluminum alloy powder-coated samples, with and without pre-anodizing treatment. The samples were exposed to a 3.5% NaCl solution, which is known for its strong corrosive effects, and thei...
A very simple, as well as sensitive and selective, sensing protocol was developed on a pre-anodized graphite pencil electrode surface coated using poly(thionine) (APGE/PTH). The poly(thionine) coated graphite pencil was then used for simultaneous sen...
Microstructures and nanostructures can be used to reduce the adhesion of the cells on the auxiliary material. Therefore, the aim of our work was to fabricate laser-induced hierarchical microstructures and nanostructures by femtosecond laser-treatment...
Producing consistent quality pre-baked carbon anodes for the Hall–Héroult aluminum reduction process is challenging due to the decreasing quality and increasing variability of anode raw materials. Non-destructive testing techniques (NDT)...
Pencil graphite electrode (PGE) is an alternative, commercially available, ready-to-use, screen-printed electrode for a wide range of electroanalytical applications. Due to the complex-matrix composition and unpredictable electro-inactive nature of P...
In the frame of the current work, it was shown that plasma electrolytic oxidation (PEO) treatment can be applied on top of phosphoric sulfuric acid (PSA) anodized aluminum alloy AA2024. Being hard and well-adherent to the substrate, PEO layers improv...
Carbon nanotubes (CNT) are used as anodes for flexible Li-ion micro-batteries. However, one of the major challenges in the growth of flexible micro-batteries with CNT as the anode is their immense capacity loss and a very low initial coulombic effici...
In this study, anodizing treatment was utilized to etch titanium (Ti) substrates’ surface to prefabricate nano-cavities. Resin pre-coating (RPC) and three silane coupling agents’ coating (CAC) techniques were further applied to porous Ti...
It has been recognized that a connection may exist between defects of oxide coating and its corrosion protection. Such a link has not been substantiated. We prepare two coatings of anodized aluminum oxide (AAO) and plasma electrolytic oxidation (PEO)...
Using biomass-derived hard carbon materials as anode materials for sodium-ion batteries has facilitated resource recycling and brought significant economic benefits. However, the main obstacles to the large-scale application of these materials are th...
Pre-lithiation using Li–Si alloy-type additives is a promising technical approach to address the drawbacks of Si-based anodes, such as a low initial Coulombic efficiency (ICE) and inevitable capacity decay during cycling. However, its commercia...
Although silicon-based anodes have been identified as a potential alternative to conventional graphite anodes, the huge volume change (approximately 300%) that occurs in silicon while cycling still impedes this system from practical applications. In...
Aluminum is widely used in many industries like automotive, aerospace and construction because of its low weight, good mechanical strength and resistance to corrosion. This resistance comes mainly from a passive oxide layer that forms on its surface....
Plasma electrolytic oxidation processing is a novel promising surface modification approach for various materials. However, its large-scale application is still restricted, mainly due to the problem of high energy consumption of the plasma electrolyt...
Carbon fiber reinforced polymer (CFRP) is widely used in the lightweight design of high-speed trains due to its high specific strength. In order to further reduce the weight of the high-speed train body, it is necessary to study the joining process a...
A disposable paper-based glucose biosensor with direct electron transfer (DET) of glucose oxidase (GOX) was developed through simple covalent immobilization of GOX on a carbon electrode surface using zero-length cross-linkers. This glucose biosensor...
A new amorphous compound with the initial atomic composition Al43Li43Y6Ni8 applied as electrode material for Li-ion batteries is investigated. Unlike other amorphous compounds so-far investigated as anode materials, it already contains Li as a base e...
This study assesses how different anode materials influence neutron production rates (NPRs) in multi-state fusion (MSF) reactors, with a particular focus on the effects of deuterium (D) pre-loading on the anode surface. Three types of mesh anodes wer...
The anode electrode is one of the most important components in all microbial electrochemical technologies (METs). Anode materials pretreatment and modification have been shown to be an effective method of improving anode performance. According to mas...
In this paper, we focused on the initiation of porosity in the anodic alumina under galvanostatic conditions in chromic acid, using an 18O isotope tracer. The general concept of the initiation and growth of porous anodic oxide films on metals has und...
Anodization is a method to fabricate a tunable nanoporosity and thickness of alumina coating. This research is devoted to large-area hard anodization (HA), ultrahard anodization (UHA), and transitional modes. The phenomenon and challenges of UHA and...
The supplementary motor area (SMA) may modulate spinal reciprocal inhibition (RI) because the descending input from the SMA is coupled to interneurons in the spinal cord via the reticulospinal tract. Our study aimed to verify whether the anodal trans...
Impedance changes of the anode, cathode and solution were examined for an air-cathode microbial fuel cell (MFC) under varying conditions. An MFC inoculated with a pre-enriched microbial culture resulted in a startup time of less than ten days. Over t...
Anodization of aluminum with a pre-patterned surface is a promising approach for preparing anodic aluminum oxide (AAO) films with defect-free pore arrangement. Although pronounced effects of crystallographic orientation of Al on the AAO structure hav...
Wood charcoal is an attractive alternative to petroleum coke in production of carbon anodes for the aluminum smelting process. Calcined petroleum coke is the major component in the anode recipe and its consumption results in a direct greenhouse gas (...
In the Hall–Héroult process, prebaked carbon anodes are utilized to produce primary aluminium. The quality of the anode plays a crucial role in the efficiency of electrowinning primary aluminium. In the production of anodes, the anode baking is consi...
Carbon anodes are consumed in electrolysis cells during aluminum production. Carbon consumption in pre-bake anode cells is 400–450 kg C/t Al, considerably higher than the theoretical consumption of 334 kg C/t Al. This excess carbon consumption is par...
A thermo-rechargeable battery or tertiary battery converts thermal energy into electric energy via an electrochemical Seebeck coefficient. The manufacturing of the tertiary batteries requires a pre-oxidation step to align and optimize the cathode and...
This research article aims to improve the specific capacitance of DC-etched Al foil for Al electrolytic capacitors by forming an Al2O3-TiO2 composite anodic oxide film. DC-etched Al foils for aluminum electrolytic capacitors were immersed in a TiO2 p...
Calcium phosphate (CaPh) coatings are considered promising surface treatments for Mg-based implants. Normally, the phase conversion process of CaPh compounds occurs during immersion in simulated body fluid (SBF) and allows the easy penetration of a c...
The anode-free lithium metal battery (AFLMB) is attractive for its ultimate high energy density. However, the poor cycling lifespan caused by the unstable anode interphase and the continuous Li consumption severely limits its practical application. H...
The adhesion strength between thin films has a significant effect on performance of micro-devices. It is introduced that the effects of three pre-treatment methods: acid, pulse reverse current and anodic current, on the adhesion performance of electr...
In this paper, we experimentally investigated two high temperature polymer electrolyte membrane fuel cell (HT-PEMFC) stacks for their response to the presence of reformate impurities in an anode gas stream. The investigation was aimed at characterizi...
A relatively low voltage can be favor of e- transfer and peroxide generation from dominant 2e--reduction of O2 on carbon materials as cathode, with low energy loss. In this study the conversion of As(III) in simulated high arsenic groundwater at low...
Ti-based bulk metallic glasses are promising materials for metallic bone implants, mainly due to their mechanical biofunctionality. A major drawback is their limited corrosion resistance, with high sensitivity to pitting. Thus, effective surface trea...
Algal extracellular organic matter (EOM) will cause grievous membrane fouling during the filtration of algae-laden water; hence, boron-doped diamond (BDD) anodizing was selected as the pretreatment process before the ultrafiltration, and the EOM foul...
Silicon (Si) has been considered to be one of the most promising anode materials for high energy density lithium−ion batteries (LIBs) due to its high theoretical capacity, low discharge platform, abundant raw materials and environmental friendl...
The lithium-ion battery (LIB) has become the most widely used electrochemical energy storage device due to the advantage of high energy density. However, because of the low rate of Faradaic process to transfer lithium ions (Li+), the LIB has the defe...
This work reports on the effects of surface pre-treatment and EPD process parameters on the nanomechanical and adhesive performance of chitosan-based composite coatings fabricated on a Ti13Zr13Nb alloy. Three different coating systems were prepared:...
We investigated the effect of anodal transcranial direct current stimulation (tDCS) over the right dorsolateral prefrontal cortex (rDLPFC) on the sensitive decision making of female team sports referees. Twenty-four female referees voluntarily partic...
In this study, we report an effective approach, pre-solid solution (SS) treatment, to reduce the in-vitro bio-degradation rate of the hydrothermal-synthesizing coated Mg–2Zn–Mn–Ca–Ce alloy in Hanks’ solution. Pre-SS treatment alters the microstructur...
Given the rising upscaling trend in lithium-ion battery (LiB) production, there is a growing emphasis on the environmental and economic impacts alongside the high energy density demands. The cost and environmental impact of battery production primari...
Developing electrode materials with high voltage and high specific capacity has always been an important strategy for increasing the energy density of lithium-ion capacitors (LICs). However, organic-based electrolytes with lithium salts limit their p...
Biomass-derived products, such as lignin, are interesting resources for energetic purposes. Lignin is a natural polymer that, when added to the anode of an alkaline exchange membrane water electrolyser, enhances H2 production rates and efficiencies d...
(1) Background: Alzheimer’s disease (AD) accounts for 70% of dementia cases and with no effective pharmacological treatments, new rehabilitation methods are needed. Motor and cognitive activities and transcranial direct current stimulation (tDC...
Due to its high theoretical specific capacity, a silicon anode is one of the candidates for realizing high energy density lithium-ion batteries (LIBs). However, problems related to bulk silicon (e.g., low intrinsic conductivity and massive volume exp...
To address the challenge of the huge volume expansion of silicon anode, carbon-coated silicon has been developed as an effective design strategy due to the improved conductivity and stable electrochemical interface. However, although carbon-coated si...
18 February 2019
Mine tailings have been analyzed by a sequential extraction procedure after their pre-treatment with a leaching solution for 24 h and electrodialytic remediation during 15 days with a constant electric field of 2.7 V cm−1. Four leaching solutio...
of 4