2,172 Results Found

Orthopedic oncology has begun to use three-dimensional-printing technology, which is expected to improve the accuracy of osteotomies, ensure a safe margin, and facilitate precise surgery. However, several difficulties should be considered. Cadaver an...

Background: Corrective osteotomy surgery for long bone anomalies can be very challenging since deformation of the bone is often present in three dimensions. We developed a two-step approach for 3D-planned corrective osteotomies which consists of a cu...

We present a case report of a 12-year old female with a midshaft forearm fracture. Initial conservative treatment with a cast failed, resulting in a malunion. The malunion resulted in functional impairment for which surgery was indicated. A correctiv...

The aim of this study was to describe the diagnosis and treatment of grade IV lateral patellar luxation (LPL) in two adult large breed dogs with complex femoral deformities using patient-specific three-dimensionally (3D) printed osteotomy guides and...

Background: Scaphoid reconstruction after an established non- or malunion is challenging and recent developments have shown the feasibility to reconstruct it with 3D-planned and -printed patient-specific instrumentation. Methods: Our study compared t...

Background/Objectives: Limb malalignment disrupts physiological joint forces and predisposes individuals to the development of osteoarthritis. Surgical interventions such as distal femur or high tibial osteotomy aim to restore mechanical balance on w...

Femoral neck osteotomy creates a critical anatomical landmark for surgeons performing primary Total Hip Arthroplasty (THA); it affects the final height and position of the femoral component. Patient Specific Instrumentation (PSI) has been developed t...

Due to the complex anatomical shape of the pelvis, screw placement can be challenging in acetabular fracture surgery. This study aims to assess the accuracy of screw placement using patient-specific surgical drilling guides applied to pre-contoured c...

The risk of non-union and prolonged periods of protected weight-bearing still remain unsolved issues after distal femur osteotomy (DFO). To improve the stability, we developed the double chevron-cut technique, which is a modified medial closing-wedge...

In recent years, patient-specific spinal drill guides (3DPGs) have gained widespread popularity. Several studies have shown that the accuracy of screw insertion with these guides is superior to that obtained using the freehand insertion technique, bu...

Limb-sparing techniques for appendicular primary bone tumors are still associated with a high rate of complications. Three-dimensional (3D)-printed patient-specific instruments could reduce these complications. The aim of this study is to describe a...

Background and Objectives: Three-dimensional planning and guided osteotomy utilizing patient-specific instrumentation (PSI) with the contralateral side used as a reference have been proven as effective in the treatment of malunions following complex...

Acromegaly is a medical condition where elevated growth hormone or insulin-like growth factor I levels cause several changes in the craniofacial soft and hard features. We report the correction of facial deformity and posterior open bite with Le Fort...

Objective: Frontal sinus surgery is still challenging for surgeons; the frontal osteotomy with the preparation of a frontal bone flap to access the sinus is usually hand-crafted by experienced surgeons. The objective of our study is to present a full...

Objectives: This pre-clinical feasibility study evaluates the accuracy of a novel augmented reality-based (AR-based) guidance technology using head-mounted displays (HMDs) for the placement of patient-specific instruments (PSIs)—also referred t...

Background: Midfacial trauma involving the zygomatic-maxillary-orbital (ZMO) complex poses significant reconstructive challenges due to anatomical complexity and the necessity for high-precision alignment. Traditional manual reduction techniques ofte...

Objectives: Pelvic tumor resections demand high surgical precision to ensure clear margins while preserving function. Although patient-specific instruments (PSIs) improve osteotomy accuracy, positioning errors remain a limitation. This study evaluate...

This study aimed to evaluate the placement accuracy and reproducibility of Surface Guided Radiotherapy (SGRT) compared with the conventional tattoo/laser method in patients undergoing radiotherapy for abdominal malignancies. A retrospective analysis...

(1) Background: The adoption of Virtual Surgical Planning (VSP) and 3D technologies is rapidly growing within the field of orthopedic surgery, opening the door to highly innovative and individually tailored surgical techniques. We present an innovati...

As the fibula free flap became the gold standard in mandibular reconstruction that required both hard tissue and soft tissue, various methods have been sought to solve the height discrepancy between the mandible and fibula. The purpose of this paper...

The augmentation of the alveolar crest after the loss of one or several teeth can be carried out using different bone augmentation techniques. These techniques include bone distraction, ridge expansion, bone block grafts, etc. Guided bone regeneratio...

Complex deformities of lower limbs are frequent in children with genetic or metabolic skeletal disorders. Early correction is frequently required, but it is technically difficult and burdened by complications and recurrence. Herein, we described the...

Aim of the Study: To assess how virtual reality (VR) patient-specific simulations can support decision-making processes and improve care in pediatric urology, ultimately improving patient outcomes. Patients and Methods: Children diagnosed with urolog...

This study evaluates the accuracy of drill guides fabricated in medical-grade, biocompatible materials for static, computer-aided implant surgery (sCAIS). The virtually planned drill guides of ten completed patient cases were printed (n = 40) using p...

In this article, the authors propose a novel procedure for designing a customized 3D-printed surgical template to guide surgeons in inserting screws into the sacral zone during arthrodesis surgeries. The template is characterized by two cylindrical g...

Obtaining a proper position for total hip arthroplasty components is a crucial aspect of implant performance and consequently of patient outcomes. Restoring the original hip center and maintaining the limb length are key factors in reaching the optim...

Background/Objectives: 3D patient-specific corrective osteotomies are optimized for use with oscillating saws, thereby rendering it incapable of executing curved osteotomies. The aim of this technical note is to introduce and evaluate the Panflute te...

Patient-specific cutting guides are used for safe and accurate jaw resection during oral and maxillofacial surgery. This study investigated the effect of shavings from 3D-printed cutting guide materials during surgery on bone healing. The biocompatib...

Background and objectives: Patient-specific components (PSC) represent an innovative option for total knee arthroplasty (TKA) in advanced osteoarthritis. Their effectiveness, however, closely relies on accurate positioning. Our study investigates the...

Background: Mandibular reconstruction remains challenging in oral and maxillofacial surgery due to its complex anatomy and functional requirements. While Deep Circumflex Iliac Artery (DCIA) flaps offer advantages in bone height and natural contour, t...

Corrective osteotomy has been applied to realign and stabilize the bones of dogs with lameness. However, corrective osteotomy for angular deformities requires substantial surgical experience for planning and performing accurate osteotomy. Three-dimen...

The objective of this study was to evaluate the accuracy of a CT-based, 3D-printed, patient-specific brain biopsy guide (3D-psBBG) through the application of a transfrontal approach in canine cadavers. A total of ten canine cadavers, with weights ran...

Background/Objective: With the rapid advancement in surgical technologies, new workflows for mandibular reconstruction are constantly being evaluated. Cutting guides are extensively employed for defining osteotomy planes but are prone to errors durin...

Background/Aim: The primary aim was to evaluate the prevalence and localisation of dental injuries caused by osteosynthesis screws during orthognathic surgery, comparing two different CAD/CAM planning/surgical approaches through retrospective evaluat...

Background and Objectives: The treatment of transfemoral amputees using osseointegrated implants for prosthetic anchorage requires accurate implant positioning when using threaded bone-anchoring implants due to the curvature of the femur and the risk...

The study of CAD (computer aided design) modeling, design and manufacturing techniques has undergone a rapid growth over the past decades. In medicine, this development mainly concerned the dental and maxillofacial sectors. Significant progress has a...

The functional positioning of components in a total hip arthroplasty (THA) and its relationship with individual lumbopelvic kinematics and a patient’s anatomy are being extensively studied. Patient-specific kinematic planning could be a game-changer;...

The objective of this study was to assess the accuracy of autoclavable, three-dimensionally (3D) printed drill guides (3DPG) created with a rapid printing protocol and utilized by both an experienced and inexperienced surgeon in constraining the traj...

This study aimed to determine the validity of basing retreatment decisions on anatomical criteria alone (captured using optical coherence tomography (OCT)—OCT-guided strategy) rather than the gold standard (combined visual acuity (VA) and OCT)...

Background: Genioplasty as an isolated surgical technique is a highly demanded procedure in the maxillofacial surgery area. Advances in facial reconstructive surgery have been associated with less morbidity and more predictable results. In this paper...

The purpose of this article was to describe the workflow from imaging, via virtual design, to manufacturing of patient-specific titanium reconstruction plates, cutting guide and mesh, and its utility in connection with surgical treatment of acquired...

The aim of this study is to assess if the decision to retreat could be determined by anatomical criteria (mostly driven by optical coherence tomography (OCT)-guided strategy) rather than the gold standard (visual acuity (VA) and OCT) in patients with...

Background: New technologies and techniques allow us to offer better solutions for patients’ needs. Specifically, guided surgery is usually flapless, and the resulting prosthetic rehabilitation often includes immediate loading. Thus, bleeding r...

Background: The objective of this study was to compare the value of ultrasound (US), magnetic resonance imaging (MRI), and US-guided fine-needle aspiration biopsy (FNAB) in the preoperative evaluation of parotid tumors. Methods: A three-year prospect...

Patient-specific three-dimensional (3D) printed models have been increasingly used in many medical fields, including cardiac surgery for which they are used as planning and communication tools. To locate and plan the correct region of interest for th...

This study assesses the accuracy and technical predictability of a computer-guided procedure for harvesting bone from the external oblique ridge using a patient-specific cutting guide. Twenty-two patients needing bone augmentation for implant placeme...

This research evaluated the diagnostic accuracy and complication rate of computed tomography (CT)-guided percutaneous transthoracic lung biopsy (PTNB) in patients 80 years and older. The study sought to identify risk factors for diagnostic failures o...

Background and Objectives: It is necessary to properly diagnose and manage axillary lymphadenopathy caused by a variety of diseases. This study aimed to evaluate the utility of ultrasound (US)-guided sampling in patients with axillary lymphadenopathy...

Background: Peroral cholangioscopy (POCS) has become a widely-used technique in diagnosing indeterminate biliary strictures, enabling optical viewing of the biliary system and targeted biopsies under direct vision. The diagnostic utility of the new e...

The recent exponential increase in the number of COVID-19 patients in Italy led to the adoption of specific extraordinary measures, such as the need to convey treatment of all non-deferrable cancer patients to specialized centres (hubs). We reported...