Nanoparticles (NP) embedded into a matrix material have been shown to improve mechanical properties such as strength, hardness, and wear-resistance. However, the tendency of NPs to agglomerate in the powder mixing process is a major concern. This stu...
Gold nanoparticles (AuNPs) were synthesised using ultrasonic spray pyrolysis (USP) with the addition of polyvinylpyrrolidone (PVP) as a stabilising agent and subsequently dried via lyophilisation. The resulting dried AuNPs were redispersed in ethanol...
The control of nanoparticle agglomeration during the fabrication of oxide dispersion strengthened steels is a key factor in maximizing their mechanical and high temperature reinforcement properties. However, the characterization of the nanoparticle e...
Nanodrug-carrier delivery in the blood stream is strongly influenced by nanoparticle (NP) dispersion. This paper presents a numerical study on NP transport and dispersion in red blood cell (RBC) suspensions under shear and channel flow conditions, ut...
The interaction of excitons with localized surface plasmons in hybrid nanostructures containing semiconductor quantum dots and metal nanoparticles, under specific conditions, may generate products with collective optical properties that have an abund...
Titanium dioxide (TiO2) nanoparticles have been applied in membrane antifouling performance modification for years. However, the influence of TiO2 nanoparticle dispersion status during the blending process on membrane properties and the inner mechani...
Nanolubricants have attracted great interest due to the promise of friction and wear reduction by introducing nanoparticles. To date, the foremost challenge for developing a new nanolubricant is particle suspension. To understand the mechanisms of na...
Shungite carbon (ShC) nanoparticles in the form of stable aqueous dispersions represent a promising solution for optical and biomedical applications. The dispersion is an interesting phenomenon from the point of view of stabilization of ShC nanoparti...
We consider the nonequilibrium dispersion force acting on nanoparticles on the source side of a gapped graphene sheet. Nanoparticles are kept at the environmental temperature, whereas the graphene sheet may be either cooler or hotter than the environ...
The interest in using colloidal dispersions of gelled lipid nanoparticles (GLN) for different fields of application has increased in recent years, notably in cosmetic, dermatology, and/or pharmaceutics due to their capacity to immobilize compounds wi...
Polymer grafted inorganic nanoparticles attract significant attention, but pose challenges because of the complexity. In this work, a facile strategy to the graft polymer onto the surface of nanoparticles have been introduced. The vinyl functionalize...
One of the technical possibilities to enhance the properties of lubricants and biolubricants is dispersing nanoparticles in them. Although conceptually simple, this operation faces challenges related to: (1) obtaining an initial good dispersion of th...
The aim of this study was to develop celecoxib-polyvinylpyrrolidone (PVP) solid dispersion nanoparticles with and without surfactant using the supercritical antisolvent (SAS) process. The effect of different surfactants such as gelucire 44/14, poloxa...
In this paper, inorganic oxide MgO nanoparticles-doped polymer dispersed liquid crystal (PDLC) films were made from a mixture of the prepolymer, SLC1717 liquid crystal, and MgO nanoparticles by the polymerization induced phase separation (PIPS) proce...
The impact of zinc oxide (ZnO) nanoparticles on the dispersion, rheological behaviour, and mechanical properties of epoxy-based composites was investigated. Through experimental examinations, we found that 100 nm ZnO with a 4 wt.% content, when incor...
22 December 2015
Quality by design (QbD) in the pharmaceutical industry involves designing and developing drug formulations and manufacturing processes which ensure predefined drug product specifications. QbD helps to understand how process and formulation variables...
27 September 2012
Zinc sulfide semiconductor nanoparticles were synthesized in an aqueous solution of polyvinyl pyrrolidone via a simple microwave irradiation method. The effect of the polymer concentration and the type of sulfur source on the particle size and disper...
Polymer nanocomposites (PNCs) are a versatile class of materials known for their enhanced mechanical, thermal, electrical, and barrier properties, with the latter referring to resistance against the permeation of gases and liquids. Achieving optimal...
This study aims to examine the impact of the direct and indirect mixing techniques on the dispersion and homogeneity of magnesium oxide (MgO) and silver (Ag) nanoparticles (NPs) mixed with polymethylmethacrylate (PMMA). NPs were mixed with PMMA powde...
The use of diverse metal nanoparticles (MNPs) in a wide range of commercial products has led to their co-existence in the aqueous environment. The current study explores the dispersion and aggregation fate of five prominent MNPs (silver, copper, iron...
The production of stable and homogeneous batches during nanoparticle fabrication is challenging. Surface charging, as a stability determinant, was estimated for 3-aminopropyltriethoxysilane (APTES) coated pre-formed magnetite nanoparticles (MNPs). An...
Methodologies across the dispersion preparation, characterization, and cellular dosimetry of hydrophilic nanoparticles (NPs) have been developed and used extensively in the field of nanotoxicology. However, hydrophobic NPs pose a challenge for disper...
Herein, the influence of various contents of polyethylene glycol (PEG) on the dispersion of TiO2 nanoparticles and the comprehensive properties of PVDF/TiO2 composite membranes via the steric hindrance interaction was systematically explored. Hydroph...
Co- and Fe-based alloys produced by powder technology are being widely used as a matrix for diamond-containing composites in cutting, drilling, grinding pplications, etc. The severe service conditions demand that the mechanical and tribological prope...
Genistein is one of major isoflavones derived from soybean products and it is believed to have beneficial effects on human health. However, its low water-solubility and poor oral bioavailability severely hamper its use as a functional food ingredient...
In this study, the effects of disperse blue dye-sensitization on the photocatalytic properties of the Ag-N co-doped TiO2 nanoparticles loaded on polyethylene terephthalate (PET) filaments are investigated under visible light irradiation. The microstr...
In this study, a simple one-step method was developed to load small-sized Pt nanoparticles (3.1 ± 0.3 nm) in large quantities (50 wt %) on aniline-functionalized and reduced graphene oxide (r-fGO). In the process, an ethylene glycol solution and anil...
High-performance water-based inkjet inks are critical for advancing inkjet printing technology. The performance of water-based inkjet inks depends largely on the dispersion stability of organic pigments. This imposes higher demands on the performance...
Polymers adsorbed on nanoparticles (NPs) are important elements that determine the dispersion of NPs in polymer nanocomposite (PNC) films. While previous studies have shown that increasing the number of adsorbed polymers on NPs can improve their disp...
We developed an amorphous solid dispersion (ASD) of the poorly water-soluble molecule niclosamide that achieved a more than two-fold increase in bioavailability. Notably, this niclosamide ASD formulation increased the apparent drug solubility about 6...
Ru/TiO2 are promising heterogeneous catalysts in different key-reactions taking place in the catalytic conversion of biomass towards fuel additives, biofuels, or biochemicals. TiO2 supported highly dispersed nanometric-size metallic Ru catalysts were...
16 May 2022
The need for proper handling of environmental samples is significant, owing to their environmental effects on both humans and animals, as well as their immediate surroundings. In the current study, magnetic nanoparticle-based dispersive solid-phase m...
Perovskite solar cells (PSCs) are attracting increasing commercial interest due to their potential as cost-effective, lightweight sources of solar energy. Low-cost, large-scale printing and coating processes can accelerate the development of PSCs fro...
Using the polymerization-induced phase separation (PIPS) method, bilayer polymer-dispersed liquid crystal (PDLC) films with a PDLC-PVA-PDLC structure were prepared in this work. It was found that all PDLC performance indexes were affected by polymer...
This paper studies the effective dielectric properties of heterogeneous materials of the type particle inclusions in a host medium, using the Maxwell Garnet and the Bruggeman theory. The results of the theories are applied at polymer-dispersed liquid...
Niclosamide is an FDA-approved anthelmintic that is being studied in clinical trials as a chemotherapeutic and broad-spectrum antiviral. Additionally, several other applications are currently in the preclinical stage. Unfortunately, niclosamide is a...
In nearly all the cases of biotoxicity studies of silver nanoparticles (AgNPs), AgNPs used often have general dispersibility and wide size distribution, which may inevitably generate imprecise results. Herein, a kind of synthesis method by coupling e...
The magnetorheology and dispersion stability of bidisperse magnetic particles (BMP)-based magnetorheological (MR) fluids were improved by applying a novel functional coating composed of gelatin and graphite oxide (GO) to the surfaces of the micron-si...
The encapsulation of bicyclic monoterpene α-pinene into solid lipid nanoparticles (SLN) is reported using experimental factorial design, followed by high-end dispersion analyzer LUMiSizer®. This equipment allows the characterization of the...
Dispersed silver nanoparticles (NPs) are synthesized on a silicone oil substrate under varied substrate temperature T by thermal vaporization method. Scanning electron microscopic investigation demonstrates that the mean size of the NPs are around 7....
To develop highly sensitive surface-enhanced Raman spectroscopy (SERS) films, various types of aggregated Ag nanowire (NW) and nanoparticle (NP) complex structures were fabricated using anodic aluminum oxide (AAO) templates and thermal evaporation. A...
Throughout recent years, the implementation of nanoparticles into the microstructure of additively manufactured (AM) parts has gained great attention in the material science community. The dispersion strengthening (DS) effect achieved leads to a subs...
Vegetable oil-in-water (VO/W) emulsions are bio-based metal working lubricants. The emulsions’ lubrication performance depends on the stability of oil droplets. In this paper, the oil droplets’ dispersion stability and lubrication of emul...
Driven by the rapid development of additive manufacturing technologies and the trend towards mass customization, the development of new feedstock materials has become a key aspect. Additivation of the feedstock with nanoparticles is a possible route...
Aromatic amines such as 3-chloroaniline (3-CA) are toxic, persistent, and environmentally relevant water contaminants. Their reliable determination in aqueous systems has therefore become increasingly important. The monitoring of trace levels of thes...
Laser Powder Bed Fusion (LPBF) enables the efficient production of near-net-shape oxide dispersion-strengthened (ODS) alloys, which possess superior mechanical properties due to oxide nanoparticles (e.g., yttrium oxide, Y-O, and yttrium-titanium oxid...
Optimizing stabilizers and solvents is crucial for obtaining highly dispersed nanoparticle inks. Generally, nonpolar (hydrophobic) ligand-stabilized nanoparticles show superior dispersibility in nonpolar solvents, whereas polar ligand (hydrophilic)-s...
Cutin is a natural plant polyester, a constituent of the cuticle that covers aerial plant surfaces. Following the trends of agricultural and food waste reduction and the growing demand for plant-derived nanomaterials, cutin was extracted from tomato...
Composite sintered bodies comprising silicon dioxide (SiO2) nanoparticles dispersed in β-tricalcium phosphate (β-TCP) were prepared. The addition of nano-sized colloidal SiO2 to the β-TCP produced well-dispersed secondary phase nanopar...
Liquid membranes based on nanoparticles follow a continuous development, both from obtaining methods and characterization of techniques points of view. Lately, osmium nanoparticles have been deposited either on flat membranes, with the aim of initiat...
of 98