A better understanding of the microstructure–property relationship can be achieved by sampling and analyzing a microstructure leading to a desired material property. During the simulation of filled rubber, this approach includes extracting common agg...
In this work, a novel method is put forward to quantitatively simulate the subsurface damages microstructural alteration of titanium alloy components subjected to microscale cutting. A trans-scale numerical framework is conducted with the purpose of...
To investigate the effects of temperature and hydration on the microstructure of polymer electrolyte membrane and the transport of water molecules and hydronium ions, molecular dynamics simulations are performed on Nafion 117 for a series of water co...
This study focuses on the forming of dynamic microstructure of flexible polymer. The dynamic tensile control microstructure of the polymer mold, along with the gasbag, was used to exert pressure to achieve forming. This study simulated the dynamic co...
It was shown recently that the Fe magnetization reversal in the Fe/MnAs/GaAs(001) epitaxial system, attained by temperature control of the regular stripe pattern of the MnAs α- and β-phases, can also be driven by an ultrashort optical laser pulse. In...
Polyimide (PI) is widely used in aerospace, electronic packaging, and other fields due to its excellent dielectric and thermophysical properties. However, the performance of traditional PI materials under extreme conditions has become increasingly in...
To improve the conditions of extracting iron from nickel smelting residues, the composition modulating from FexO-SiO2-CaO-MgO-“NiO” slag source for matte smelting using high MgO nickel sulfide concentrate was carried out. Based on the mol...
This work mainly focuses on a series of microstructural analysis and predictions regarding dynamic recrystallization behavior, change in grain size, and dislocation density. Additionally, this study includes the shape prediction of the stir zone form...
The microstructure of metallic materials plays a crucial role in determining their performance. In order to accurately predict the dynamic recrystallization (DRX) behavior and microstructural evolution during the hot deformation process of GCr15 bear...
The formation and evolution of adiabatic shear behaviors, as well as the corresponding mechanical properties of a near-Ti-6Al-3Nb-2Zr-1Mo (Ti-6321) alloy during dynamic compression process, were systematically investigated by the split Hopkinson pres...
To investigate the variation in the characteristics of rock microstructure after cyclic dynamic disturbances, a split Hopkinson pressure bar (SHPB) was used to carry out cyclic dynamic impact tests on granite, and the P-wave velocity was used as the...
The hot deformation behavior and microstructural evolution of an Al-Zn-Mg-Cu (7150) alloy was studied during hot compression at various temperatures (300 to 450 °C) and strain rates (0.001 to 10 s−1). A decline ratio map of flow stresses was proposed...
Molding in thermoplastic polymers using ultrasonic hot embossing technology is promising due to its high precision reproducibility. To understand, analyze and apply the formation of polymer microstructures by the ultrasonic hot embossing method, it i...
Understanding the dynamic mechanical behaviors and microstructural properties of outburst-prone coal is significant for preventing coal and gas outbursts during underground mining. In this paper, the split Hopkinson pressure bar (SHPB) tests were com...
Iron–nickel based ultra-high strength steel (wt. 18~20% Ni) is characterized by its high strength and low thermal conductivity, and is normally used to make key components by forming and machining processes. The optimization of these processes...
Wf/Cu82Al10Fe4Ni4 composites were fabricated by the pressure infiltration method. The composites were compressed by means of a split Hopkinson pressure bar (SHPB) with strain rates of 800 and 1600 s−1 at different temperatures. The microstructure of...
An active surface with an on-demand tunable topography holds great potential for various applications, such as reconfigurable metasurfaces, adaptive microlenses, soft robots and four-dimensional (4D) printing. Despite extensive progress, to achieve r...
Due to the complexity of both material composition and the structure of the catalyst layer (CL) used in the proton-exchange membrane fuel cell (PEMFC), conjugated heat and mass transfer as well as electrochemical processes simultaneously occur throug...
Frost-induced microstructure degradation of rocks is one of the main reasons for the changes in their dynamic mechanical behavior in cold environments. To this end, computed tomography (CT) was performed to quantify the changes in the microstructure...
Aluminum alloy 2024 (AA2024) is widely used in the aerospace sector, where a fine, uniform, and equiaxed grain structure is crucial for achieving enhanced mechanical properties. This study examines the effect of dynamic solidification, assisted by me...
Friction stir processing (FSP), a severe plastic deformation process, was applied on commercially pure Ti to obtain an improved microstructure. The process yielded a refined microstructure and higher mechanical properties at room temperature (RT). Ye...
This paper presents an experimental investigation on the effect of uniformly dispersed graphene oxide (GO) nanosheets on dynamic mechanical properties of cement based composites prepared with recycled fine aggregate (RFA). Three different amounts of...
To elucidate the mechanisms of microstructural changes in ultra-high-performance concrete (UHPC) under microwave exposure, this study characterizes the microstructure at multiple scales using a combination of microscopic experiments and molecular dyn...
Superhydrophobic surfaces have aroused great interest for being promising candidates in applications such as self-cleaning, anti-icing, and corrosion resistance. However, most of the superhydrophobic surfaces lose their anti-wettability in low surfac...
This study examined the impact of hybrid reinforcement particles, specifically zirconium carbide (ZrC) and tungsten carbide (WC), as well as the parameters of friction stir processing (FSP), on the microstructure, mechanical properties, and dynamic b...
The shape of ceramic particles is one of the factors affecting the properties of metal matrix composites. Exploring the mechanism of ceramic particles affecting the cooling mechanical behavior and microstructure of composites provides a simulation ba...
The dynamics of thin elastic one-directional non-periodic plates are considered in this paper. The structure of these plates is, at a macro level, functionally graded along the x1-axis, but at the micro level it is non-periodic (tolerance-periodic)....
In this study, two-mm-thick dual-phase LA103Z Mg-Li and 6061 Al alloys, known for their application in lightweight structural designs, were joined using dynamic support friction stir lap welding (DSFSLW). The microstructural evolution and mechanical...
Magnesium-based alloy WE43 is a state-of-the-art bioresorbable metallic implant material. There is a need for implants with both complex geometries to match the mechanical properties of bone and refined microstructure for controlled resorption. Addit...
This study proposed a dynamic forming mechanism development of the negative Poisson’s ratio elastomer molds—plate to plate (P2P) forming process. To dynamically stretch molds and control the microstructural shape, the proposal is committed to using t...
The dislocation plasticity of ductile materials in a dynamic process of cold gas spraying is a relatively new research topic. This paper offers an insight into the microstructure and dislocation mechanism of the coating using simulations of molecular...
Before artificial ageing, extruded aluminium profiles are subjected to stretching with a small cold deformation in the range of 0.5–2%. This deformation improves the geometrical stability of the extruded product and causes changes in the micros...
In the Direct Energy Deposition (DED) process, the deposited material experiences intricate thermo-mechanical processes. Subsequent thermal cycling can trigger Dynamic Recrystallization (DRX) under suitable conditions, with specific strain and temper...
Dynamic and meta-dynamic recrystallization occur during forging of alloy 718 aircraft parts and thus change the microstructure during a multistep production route. Since the prediction of the resulting grain structure in a single grain fraction is no...
The effects of thermomechanical processing (TMP) on the mechanical response of microalloyed steels subjected to dynamic loading conditions were examined. The deformation conditions in the thermomechanical laboratory rolling processes were selected on...
The hot deformation behavior of an Al-Zn-Mg-Cu alloy was investigated by hot compression test at deformation temperatures varying from 320 to 440 °C with strain rates ranging from 0.01 to 10 s−1. The results show that the Mg(Zn, Cu)2 particles as a r...
The flow stress and dynamic recrystallization behavior of A356 aluminum alloy was studied, with a strain rate ranging from 0.001 s−1 to 1 s−1 and temperature ranging from 300 to 500 °C. Both the true stress–strain curves and mic...
Effective thermal management is essential in metal additive manufacturing to ensure process stability and desirable material properties. Directed energy deposition using a laser beam and wire (DED-LB/w) enables the production of large, high-performan...
The transient elongational viscosity
The grain refinement mechanisms along the material flow path in pure and high-purity Al were examined, using the marker insert and tool stop action methods, during the rapid cooling friction stir welding using liquid CO2. In pure Al subjected to a lo...
Microstructure evolution within the post-dynamic regime following hot deformation was investigated in Inconel 718 samples with different dynamically recrystallized volume fractions and under conditions such that no δ-phase particles were present. In...
The deformation behaviors of Ti-6Al-4V alloy samples with lamellar and bimodal microstructures under scratch testing were studied experimentally and using molecular dynamics simulation. It was found that the scratch depth in the sample with a bimodal...
Molecular dynamics is a method of studying microstructure and properties by calculating and simulating the movement and interaction of molecules. The molecular dynamics simulation method has become an important method for studying the structural and...
The effects of repetitive upsetting extrusion under different starting temperatures on the microstructure and texture of GWZK124 alloy were investigated. The results clearly showed that the particles and second phases induced dynamic recrystallizatio...
Continuous dynamic recrystallization (CDRX) forms a new recrystallized microstructure through the progressive increase in low-angle boundary misorientations (LAGBs) during the hot forming of metallic materials with high stacking fault energy (SFE), s...
The effect of trace Bi impurities on the flow stress, microstructure evolution, and dynamic recrystallization (DRX) of the ultrahigh-purity copper was systematically investigated by a hot compression test at 600 °C. The results show that the peak...
In this study, we investigated the hot deformation behavior and microstructural evolution of a novel high-magnesium-content (high-Mg) aluminum alloy, bridging the disciplines of material processing and physical metallurgy. Uniaxial hot compression te...
In a thermal simulator of Gleeble-3500, isothermal hot compression tests were performed on a Ni-Cr-Co-based superalloy at deformation temperatures ranging from 1323 K to 1423 K and with strain rates of 0.01, 0.1, 1, and 5 s−1. We obtained the t...
The research of marine antifouling is mainly conducted from the aspects of chemistry, physics, and biology. In the present work, the movement model of microorganisms along or against the flow direction on the microstructural surface was established....
A constitutive model for automobile steel with high elongation needs to be established to predict the dynamic deformation behavior under hydroforming applications. In order to clarify the confusing discrepancy in the essential parameters of the class...
of 47