85 Results Found

The possibility of improving the strength properties of concrete materials based on ash/slag waste from thermal power plants of Almaty (Kazakhstan) by adjusting their chemical composition is considered. An X-ray phase analysis, scanning electron micr...

The separation of cenospheres is an important method for fly ash recycling, and there is no efficient and less polluting method available for separating cenospheres. This paper proposes the dry separation of cenospheres using a cyclone separator, whi...

This work presents a study of cenosphere separation from lignite high-calcium (~24 wt.%) fly ash by centrifugal method; this is the first report for Mae Moh, Thailand, fly ash with this high calcium content using this technique. The effect of centrif...

This work reports on the separation of cenospheres from lignite fly ash through a wet separation process-the sink-float method. A better quality of cenospheres could be achieved through a physical–chemical approach using an acetone–water...

We investigated the effectiveness of TiO2 cenospheres in reducing the concentrations of three common harmful compounds, ammonium, nitrate, and nitrite, in fish aquariums. These cenospheres can contribute to more sustainable and eco-friendly aquarium...

The main objective of this paper was to investigate the heat transfer of modified lightweight refractory concrete at the microscopic scale. In this work, such material was treated as a porous composite based on the compound of calcium aluminate cemen...

Cenospheres are small, hard-shelled hollow spheres with high silica and alumina content. These micron-sized aluminosilicate hollow spheres constitute only a small percentage of the coal fly ash (CFA) obtained from the coal combustion processes. In th...

High-calcium fly ashes contain a large content of small particles including cenospheres of chemical constituents known to be similar to fly ash and the parent coal. Coal fly ash contains metal and trace elements that may leach out during disposal or...

Cenospheres are hollow particles in fly ash, a by-product of coal burning, and are widely used as a reinforcement when developing low-density composites called syntactic foams. This study has investigated the physical, chemical, and thermal propertie...

Aluminosilicate microspheres are a valuable fraction of coal fly ash with diverse applications due to their low density. Currently, there is no efficient and ecologically rational method of cenosphere recovery from fly ash. A combination of dry metho...

A low-density clay ceramic syntactic foam (CSF) composite material was successfully synthesized from illitic clay added by fly ash cenospheres (CS) using the semi-dry formation method. The content of CS varied in the range of 10, 30, 50 and 60 vol %....

Cenospheres from coal fly ashes were used as support in the preparation of Ni–Mg catalysts for dry reforming of methane. These materials were characterized by means of XRD, H2-temperature-programmed reduction (H2-TPR), CO2-temperature-programme...

The topic of research included in this article was the evaluation of the influence of cenospheres on selected parameters of mortar cement. Samples were designed as CEM I 42.5 R Portland cement with the application of different additive amounts. In th...

Sorption technologies are essential for various industries because they provide product quality and process efficiency. New encapsulated microspherical composite sorbents have been developed for resource-saving contact drying of thermolabile material...

The cenosphere is one becoming a focus of the power plant in terms of value addition and ash management. This study presents a systematic investigation and characterization of physical properties, morphological structures, and chemical composition of...

Coal fly ash (CFA) is a major global pollutant produced by thermal power plants during the generation of electricity. A significant amount of coal fly ash is dumped every year in the near vicinity of the thermal power plants, resulting in the spoilag...

As the environmental impact of modern society continues to escalate, the construction industry actively pursues environmentally friendly materials to revolutionize its practices. Recycling, especially repurposing end-of-service materials and industri...

Membrane technology is a promising method for gas separation. Due to its low energy consumption, environmental safety, and ease of operation, membrane separation has a distinct advantage over the cryogenic distillation conventionally used to capture...

In this study, syntactic composite foams were developed by incorporating cenosphere (CS) particles recovered from recycled fly ash into a one-component polyurethane (PU) foam system. During production, CS was added to the spray-applied PU foam at spe...

The results of a photocatalytic process performed in a new type of inclined, three-phase fluidised bed reactor with a periodic photocatalyst film are presented. These phases were fly ash cenospheres coated with TiO2, an aqueous solution of methylene...

The main aim of this research was the preparation of a polymer–ceramic composite with PA-12 as the polymer matrix and modified aluminosilicate cenospheres (CSs) as the ceramic filler. The CSs were subjected to an early purification and cleaning...

Nowadays, there is wide advocacy for a transition to circular economic models. Fly Ash (FA) in particular is a major by-product of coal combustion and its annual waste has reached one million tonnes. Cenospheres (CSs) are considered as possibly the m...

A series of BiOBr/BiOI photocatalysts supported on fly-ash cenospheres (FACs) were successfully prepared via a facile one-pot alcoholysis method. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM...

The coating of hollow alumino-silicate microspheres or cenospheres with thin layers of Cu by means of vibration-assisted magnetron sputtering yields a starting material with considerable potential for the production of new types of metal matrix synta...

Co-processing of radioactive effluents with coal fly ash-derived materials is recognized as a resource-saving approach for efficient stabilization/solidification of radioactive components of wastewater. In this context, the paper is focused on the hy...

This study investigated the effect of non-prewetted and prewetted cenospheres (CSs) on the hydration course and physical and mechanical properties of refractory castable mixtures incorporated with nano silica (NS). The fixed amount of 0.1% of NS impr...

The utilisation of industrial residual products to develop new value-added materials and reduce their environmental footprint is one of the critical challenges of science and industry. Development of new multifunctional and bio-based composite materi...

The aim of this study was to conduct artificial ageing tests on polymer-ceramic composites prepared from polyamide PA-12 polymer matrix for medical applications and three different variants of ceramic fillers: zirconia, alumina and cenospheres. Befor...

The most valuable components of coal fly ash are cenospheres. Cenospheres are hollow spherical particles produced during the coal-burning processes. As a result of their excellent characteristics, such as high workability, high heat resistance, low b...

Fabric-reinforced hybrid polymer composites are present in almost every sector of modern life, and most essential areas of research in recent years have focused on glass–carbon fabric with filler material composites. Fabric and fillers are empl...

Coal fly ash hollow aluminosilicate microspheres (cenospheres) of stabilized composition (glass phase—95.4; (SiO2/Al2O3)glass—3.1; (Si/Al)at. = 2.6) were used to fabricate lutetium-176 encapsulated aluminosilicate microspheres as precurso...

Traffic noise and solid waste pollution are two major problems that restrict urban development and affect urban environments. In this study, a new kind of cement-based material for sound barriers was prepared using industrial waste fly ash cenosphere...

The current investigation presents porous ceramic materials prepared with cenospheres (CS) by using spark plasma sintering. The impact of sintering temperature, mould diameter (20, 30 and 50 mm) and cenosphere size on the properties of the sintered m...

The utilization of waste materials in concrete lowers its cost, and this method of dealing with the problem of trash disposal is viewed as the most environmentally friendly. Fly Ash Cenospheres (FAC) are one of the principal wastes produced by coal p...

In order to alleviate the shortage of sand resources for construction, make full use of industrial waste and promote the development of green lightweight aggregate concrete in the desert and surrounding areas, this paper proposes a new lightweight ce...

Binder jetting is the most widely implemented additive technology for the fabrication of sand molds. However, the use of furan binder-jetting technology in the production of molds for vacuum casting is hindered by the thermal destruction of the furan...

The effects of cenospheres, an industrial waste residue, on the compressive strength, flexural strength, toughness, ductility, chemical component, microstructures, and micromechanics of lightweight toughness cement-based composites (LTCCs) by compreh...

The proposed study aims to investigate the micromechanical behavior of a reinforced polymer matrix with fly ash cenospheres. This study involves utilizing random sequential adsorption (RSA) theory to describe the distribution of the cenosphere partic...

This study aims to investigate the effectiveness of two machine learning methods for the prediction of the mechanical and fracture properties of Cenosphere-reinforced lightweight thermoset polyurethane composites. To evaluate the effectiveness of the...

The current research focuses on the analysis of fly ash cenospheres (FACs), a waste generated in coal-fired power plants, and the possibilities of using them in refractory castables. Cenospheres are micro-scale (~50–400 µm) spherical stru...

This paper investigates the effects of silica fume, cenosphere, fly ash, and ground slag powder on the rheological properties and mechanical strengths of self-compacting ultra-high performance concrete (UHPC). The mass ratio of each mineral admixture...

With the growing global concerns regarding sustainable development in the building and construction industries, concentration only on the engineering properties of building materials can no longer meet the requirements. Although some studies have bee...

The present study investigates the mechanical performance of syntactic foams produced by means of the metal powder injection molding process having an Invar (FeNi36) matrix and including cenospheres as hollow particles at weight fractions (wt.%) of 5...

The present study focuses on the synthesis and characterisation of a lightweight ceramic material with electromagnetic interference (EMI) shielding properties, achieved using mullite containing micrometre-sized hollow spheres (cenospheres) and CoFe2O...

Noise is a concern in industries like aviation. Existing acoustic materials have limitations in terms of effective broadband sound attenuation and operating conditions. This work addresses these limitations by designing and developing a noise mitigat...

Among the various methods for collecting oil spills and oil products, including from the water surface, one of the most effective is the use of sorbents. In this work, three-component bio-based composite granular adsorbents were produced and studied...

This study aimed to analyze the effects of PVA aqueous solution as a new foaming agent, and the production and characteristics of ultralight foam concrete using a mixed lightweight aggregate of perlite (PL) and cenosphere (CP). In addition, the appli...

Global coal consumption is continuously increasing. It is still the primary fuel used in power plants. Despite policies in the European Union aimed at reducing coal consumption, there are countries in the world where coal use continues to rise (China...

Owing to their convenient manufacture, transportation, low energy consumption, and environmental impacts, lightweight cement composites have been applied as building and construction materials. However, its decreased density is associated with a redu...

Fly ash (FA) is a waste product generated in huge amounts by coal-fired electric and steam-generating plants. As a result, the use of FA alone or in conjunction with other materials is an intriguing study topic worth exploring. Herein, we used FA was...