(1) Background: In endodontics, anatomical complexities and irregularities in the root canal system may interfere with sealer penetration, increasing the risk of treatment failure. This work aimed to investigate the effects of sonicated Thermafil (De...
Calliphoridae, or blow flies, are of much ecological and practical importance given their roles in decompositional ecology, medical and veterinary myiasis, and forensic entomology. As ephemeral and rapidly developing species, adults are frequently no...
Polyelectrolyte multilayers (PEMs) based on polyelectrolyte complex (PEC) structures are recognized as interesting materials for manufacturing functionalized coatings or drug delivery platforms. Difficulties in homogeneous PEC system development gene...
Photodynamic inactivation (PDI) combined with chitosan has been shown as a promising antimicrobial approach. The purpose of this study was to develop a chitosan hydrogel containing hydroxypropyl methylcellulose (HPMC), chitosan and toluidine blue O (...
The agglomeration behavior of non-metallic inclusion is a critical phenomenon that needs to be controlled as it has a direct relationship with the performance of produced steel. Although the agglomerates can be potential points for serious defects in...
Infrared thermography provides an option for characterising surface reactions and their effects on the solidification of steel under different gas atmospheres. In this work, infrared thermography has been used during solidification of Twin Induced Pl...
The contraction of peritectic steels in the initial solidification has an important influence on the formation of surface defects of continuously cast slabs. In order to understand the contraction behavior of the initial solidification of steels in t...
Non-metallic inclusions (NMIs) in steels have been the focus of various experimental studies due to their detrimental character. While isolated processes, such as agglomeration or dissolution, have been well investigated, holistic in-situ views with...
In this study, the effects of the addition of Mg to the grain growth of austenite and the magnesium-based inclusions to mobility were investigated in SS400 steel at high temperatures. A high-temperature confocal scanning laser microscope (HT-CSLM) wa...
In this study, a laser remelting process was applied to the FeCrCoNiTiAl0.6 high entropy alloy coating in order to improve the density and the surface quality of the coating. The coating was fabricated by high-velocity-oxygen-fuel (HVOF) technology....
In this paper, we used differential scanning calorimetry (DSC), high-temperature X-ray diffraction (HT-XRD), and confocal scanning laser microscopy (CSLM) to investigate the Li2O–Al2O3–SiO2 glass crystallization process. At 943 K, lithium...
The solidification characteristics of 70 steel at the stage of the superheat elimination and the liquid–solid phase transformation were analyzed at cooling rates from 10 to 150 °C/min based on a high-temperature confocal scanning laser microscope (HT...
The influences of austenitizing conditions on the microstructure of AISI M42 high-speed steel were investigated through thermodynamic calculation, microstructural analysis, and in-situ observation by a confocal scanning laser microscope (CSLM). Resul...
The purpose of this study was to investigate the effect of high molecular weight hyaluronan (HMWHA) eye drops on subbasal corneal nerves in patients suffering from severe dry eye disease (DED) and to evaluate the damage of subbasal corneal nerves ass...
Phosphogypsum (PG) and Carbide Slag (CS) are two industrial byproducts that can be used as cementitious materials, and their synergistic effect provides excellent activation of ground granulated blast furnace slag (GGBS), which is traditionally activ...
Microbial exopolysaccharides (EPS) are promising alternatives to synthetic polymers in a variety of applications. Their high production costs, however, limit their use despite their outstanding properties. The use of low-cost substrates such as agro-...
In this study, the effect of austenite grain size on acicular ferrite (AF) nucleation in low-carbon steel containing 13 ppm Mg is determined. The average austenite grain size was calculated using OM Leica software. Results show that the predicted and...
This study aims to investigate the effects of a novel ZnCuO nanoparticle coating for dental implants—versus those of conventional titanium surfaces—on bacteria and host cells. A multispecies biofilm composed of Streptococcus sanguinis, Ac...
Confocal laser scanning microscopy (CSLM) is a powerful microscopic tool that gives valuable morphological and functional information within cells and tissues. CLSM is non-invasive, with high-contrast scanning, a simple and fast sample preparation pr...
The effect of cooling rate, ranging from 6 to 1 °C/s, on microstructure and mechanical properties in the coarse-grained heat affected zone (CGHAZ) of electroslag welded pearlitic rail steel has been investigated by using confocal scanning laser m...
The exopolysaccharide (EPS)-producing Lactobacillus plantarum (renamed as Lactiplantibacillus plantarum) LBIO1, LBIO14 and LBIO28 strains, isolated from fermented dairy products typical from Algeria, were characterized to evaluate the impact of the p...
Considering the prevalence and pathogenicity of biofilms in wounds, this study was designed to evaluate the anti-biofilm capabilities of eight commercially available wound care products using established in vitro assays for biofilms. The products eva...
During vanilla bean curing, the cell arrangement derived from the killing technique applied to start bean ripening is essential to obtain the characteristic aroma and flavor of vanilla. Hence, killing is an important step to release the enzymes and c...
In this study, a composite film was prepared using irradiated chitosan, lysozyme, and carrageenan for crayfish preservation. First, the chitosan was degraded by gamma rays, with the best antimicrobial properties being found at 100 KGy. By using the r...
Background: Methicillin-resistant Staphylococcus aureus (MRSA) is a major human opportunistic pathogen that causes a wide range of infections. The vast arsenal of virulence factors expressed remains the biggest challenge in treating MRSA with convent...
Microspatial arrangements of sulfate-reducing microorganisms (SRM) in surface microbial mats (~1.5 mm) forming open marine stromatolites were investigated. Previous research revealed three different mat types associated with these stromatolites, each...
Post-bond heat treatment (PBHT) is an effective way to improve the bonding quality of a brazed joint. Herein, brazing of a nickel-based single crystal superalloy is carried out using a Ni-Cr-Co-B-Si-Al-Ti-W-Mo filler alloy, and the microstructure and...
To precisely control the characteristics of complex oxides by heat treatment, the effect of FeO on the interfacial reactions that occur between an Fe–Mn–Si alloy and CaO–SiO2–Al2O3–MgO–MnO–FeO oxide was studied and clarified. Eight types of diffusion...
The mechanism of solid-state dendrite formation in high-aluminum Fe-Al alloys is not clear. Applying an in-situ observation technique, the real-time formation and growth of FeAl solid-state dendrites during the eutectoid decomposition of the high-tem...
Considerable amounts of agro-industrial by-products are discarded every year. Moreover, these represent an interesting source of phenolics, cellulose and lignin, in addition to useful compounds such as antioxidants. However, these compounds may be af...
The phase and crystal morphology transitions of two typical types of mold fluxes were investigated fundamentally using differential scanning calorimetry (DSC) and confocal scanning laser microscopy (CSLM) techniques. For the traditional CaO–SiO...
This study focuses on S32654 super austenitic stainless steel (SASS) and systematically characterizes the morphology of the sigma (σ) phase and the segregation behavior of alloying elements in its as-cast microstructure. High-temperature confoc...