It is essential to recycle zinc leaching residue (ZLR) generated by the conventional zinc hydrometallurgy process, as it is a hazardous and potentially valuable industrial waste. A combined calcification roasting–acid leaching process was devel...
Zinc ferrite can be found in zinc-bearing dust in ironmaking and steelmaking. It is difficult to be recovered due to its stable properties. The magnetization roasting and ammonia leaching method were used to separate iron and zinc from zinc ferrite i...
Zinc-leaching residue (ZLR) is a strongly acidic hazardous waste; it has poor stability, high heavy metal levels, and releases toxic elements into the environment. ZLR has potential as a valuable resource, because it contains elevated levels of zinc...
Zinc ferrite (ZnFe2O4), one of the major forms of zinc in electric arc furnace dust and zinc leaching residue, is very difficult to chemically dissolve in either acidic or alkaline solutions. It is therefore necessary to study the extraction of zinc...
The possibility of applying the complex hydrometallurgical approach, which includes stages of alkaline sulfide leaching (ASL) and ferric leaching, for copper and zinc extraction from substandard sulfide concentrates containing chalcopyrite, tennantit...
A choline chloride-urea (ChCl-urea) deep eutectic solvent (DES) was used to experimentally investigate the secondary recovery of zinc from zinc-bearing dust sludge via a leaching process. The effects of varying the liquid–solid ratio, leaching temper...
As an important secondary zinc resource, large-scale reserves of zinc oxide dust (ZOD) from a wide range of sources is of high comprehensive recycling value. Therefore, an experimental study on ultrasound-enhanced sulfuric acid leaching for zinc extr...
Gossan discarded from mining processes result in metal resource wastage, and its long-term stacking causes environmental hazards. Therefore, this article considers zinc-containing gossan as the research object. The ore was roasted to prepare primary...
This study investigates the desulfurization and smelting reduction processes of zinc leaching residue and analyzes the kinetics of the desulfurization and smelting reduction processes of zinc leaching residue. The results showed that, when the desulf...
Secondary zinc oxide (SZO), which comes from the zinc industry, is an important secondary resource of zinc and other valuable metals. In this study, the production feasibility and rationality of a cleaner zinc recovery process using SZO and a hydrome...
Given the shortage of zinc resource, the low utilisation efficiency of secondary zinc resource, and the crucial problem that the synchronous dissolution of zinc from different mineral phases, an activation pretreatment method merged with calcium acti...
Zinc plant leach residues (ZPLRs), particularly those produced using old technologies, have both economic importance as secondary raw materials and have environmental impacts because they contain hazardous heavy metals that pose risks to human health...
Dissolved iron exerts significant effects on mineral leaching, impurity removal, and solution purification in the zinc hydrometallurgy process. To date, iron oxidation and migration behaviors are yet to be fully understood and further research on eff...
The selective leaching of zinc from three different basic oxygen steelmaking (BOS) filter cakes by butyric acid was investigated to compare the leaching behaviors of zinc and further to establish the correlation of the zinc leaching performances and...
The leaching kinetics of zinc from zinc oxide-based metal oxide varistors (MOVs) was investigated in H2SO4 at atmospheric pressure. Kinetics experiments were carried out at various agitation speeds, particle sizes, initial H2SO4 concentrations, and r...
This study presents an innovative approach to processing refractory zinc-bearing clinker using microwave thermal treatment followed by acid leaching. Microwave irradiation induces phase transformations, converting sphalerite (ZnS) to zincite (ZnO), a...
In this study, the zinc containing dust and sludge of iron and steel smelting was taken as the research object, and the new ionic liquid of choline-urea was prepared and synthesized as the leaching agent. The conventional and ultrasonic leaching of z...
Recovery of zinc and manganese from scrapped alkaline batteries were carried out in the following way: leaching in H2SO4 and selective precipitation of zinc and manganese by alkalization/neutralization. As a result of non-selective leaching, 95.6&nda...
The purpose of this work is to obtain the optimum conditions for leaching the zinc contained in an industrial lead smelting slag. In this type of slag, zinc oxide, sulfide, and ferrite are contained. Zinc extraction from these compounds consists of u...
In this work, oxidizing roasting was combined with leaching to separate copper, lead, and zinc from a concentrate obtained by bulk flotation of a low-grade ore sourced from the Jiama mining area of Tibet. The flotation concentrate contained 7.79% Cu,...
A novel acid-free oxygen pressure leaching for the extraction of zinc from hemimorphite was proposed in this study. Green vitriol (FeSO4·7H2O), as one of the important industrial by-products, was used as the leaching reagent to separate zinc f...
The efficacy of monosodium glutamate (MSG) as a lixiviant for the selective and sustainable leaching of zinc and copper from electric arc furnace dust was tested. Batch leaching studies and XRD, XRF and SEM-EDS characterization confirmed the high lea...
The recovery of zinc from metallurgical dust sludge is a crucial component of using solid waste as a resource in the metallurgical process, and deep eutectic solvent–ultrasonic synergistic enhanced leaching is an efficient method of doing so wi...
Super-hot acid leach residue is generated during zinc production in the roasting–leaching–electrowinning route, where both primary and secondary resources are used as feed material. This residue may contain valuable metals, such as lead,...
Recovery of zinc from low grade zinc oxide ore is attempted with ammonia and ammonium citrate solutions augmented by microwave roasting and ultrasound radiation. The influence of the ammonia-ammonium ratio, roasting temperature, ultrasound power, and...
This study presents an innovative approach to processing refractory zinc-bearing clinker through the synergistic application of microwave thermal treatment and ultrasonic-assisted leaching. Microwave irradiation induces phase transformations in the c...
The limited availability of high-quality ore deposits and the environmental hazards of metallurgical wastes highlight the importance of developing resource-efficient metal recovery technologies. Zinc kiln slag (ZKS), also known as Waelz slag, a by-pr...
Germanium-containing residues (GCR) are a secondary resource rich in zinc (Zn) and germanium (Ge) produced in the Zn pyrometallurgical process and an important raw material for recovering Zn and Ge. To recycle the residue by hydrometallurgy, sulfuric...
This study presents the results of an investigation into the effectiveness of microwave (MW) treatment (1) as a preconditioning method for technogenic raw materials (2) to enhance zinc (3) leaching (4) efficiency. Selective dielectric heating facilit...
In the hydrometallurgical process of zinc production, the residue from the leaching stage is an important intermediate product and is treated in a Waelz kiln to recover valuable metals. To ensure optimal results during the Waelz kiln process, it is n...
Molecular dynamics of the interaction between four metal oxides (ZnO, Fe2O3, Al2O3, and CaO) present in zinc-bearing dust sludge and choline chloride (ChCl)-malonic acid (MA)(1:2) was studied in this work using Materials Studio software. The interact...
At present, the pollution of arsenic (As) and lead (Pb) is becoming increasingly serious. The pollution caused by the release of As and Pb from lead–zinc mines has seriously affected the water and soil environment and threatened human health. I...
A leachate from alkaline leaching of copper shaft furnace (CSF) dust as a hazardous waste was used in this study for performing a chemical precipitation experiment of lead, zinc, and copper. The precipitation processes for lead, zinc, and copper were...
The traditional metallurgical routes for producing lead and zinc from primary sources have a significant environmental footprint. Thus, using less pollutant solvents, such as deep eutectic solvents (DESs), would offer a greener solution in metal extr...
Zinc plant leach residues (ZPLRs) contain significant amounts of metal compounds of lead (Pb), zinc (Zn), iron (Fe), etc., hence, they are considered as a secondary source of metals. On the other hand, ZPLRs are regarded as hazardous materials becaus...
During the acidic leaching of flotation zinc oxide concentrates, CO2 released from carbonate decomposition generates viscous foams that disrupt process stability. This study introduces an innovative synergistic defoaming process combining air flotati...
In this study, the response surface method is used to develop a model for analyzing and optimizing zinc leaching experiments. An investigation into the leaching kinetics of smithsonite in ammonium citrate solution is also conducted. A model of kineti...
The sludge from a wet-off gas cleaning system of the iron blast furnace (BF) contains significant amounts of iron; however, they cannot be recycled due to their high content of zinc and alkalis. These compounds are detrimental to the optimal performa...
Steel is one of the most widely used materials in the past and today. Various techniques are used to recycle this material, including the electric arc furnace. This process has several advantages, but it also has a major disadvantage, namely, the gen...
Leaching of metals from waste button cell batteries was explored in this study. Aspergillus niger spent medium was used for metal leaching to avoid toxicity of metals toward microbial cells. Process parameters including time, temperature, shaking spe...
Autoclave leaching of zinc concentrate (Sphalerite) is an environmentally friendly process compared to roasting, which discharges pollutants into the atmosphere. Due to the amount of iron in the final product, a study is proposed to evaluate differen...
During the roasting, leaching, and electrodeposition of zinc ores, lead–silver residues are produced. These residues contain valuable metals (Pb, Zn, and Ag) and toxic metals (Cd and As). In this study, a pyrometallurgical process is proposed f...
Zinc oxide dust (ZOD) is an industrial solid waste produced in the production process of wet smelting Zn, with large output and great pollution to the environment. The recycling of metallurgical solid waste such as zinc oxide dust is very important t...
Leaching of the dross containing 28.7% Sn, 18.0 Pb, 10.6% Cu, 8.9% Ge, 8.1% Zn, and 2.7% In in sulphuric and oxalic acid solution was investigated. The dross was obtained from thermal oxidation of by-product alloy generated during a New Jersey (NJ) z...
Inappropriate disposal of leaching residues from the lead-zinc tailings recovery process may result in environmental pollution. Its recycling and reuse remain a prevalent topic in environmental science and technology. It was roasted to prepare leachi...
Zinc-containing dust can be found in ironmaking and steelmaking, and it is an important secondary resource of zinc. Zinc-containing dust from an electric furnace was used as a raw material to study the phase transformation behavior of the dust using...
To realize the high value-added utilization of zinc hypoxide in a rotary hearth furnace, nano-ZnO was prepared by H2SO4 wet leaching combined with the Na2CO3 precipitation process. The effects of different process conditions on the leaching rate of Z...
The present article aims to develop a technological scheme for processing zinc ferrite residue, which typically forms during the leaching of zinc calcine. This semi-product is currently processed through the Waelz process, the main disadvantage of wh...
Mine tailing storage represents an important environmental issue. The generation and dispersal of dust from mine tailings can contaminate air and surrounding soils. In addition, metals and soluble salts present in these wastes could pollute groundwat...
An efficient flotation process was developed to selectively recover elemental sulfur from a high-sulfur pressure acid leaching residue of zinc sulfide concentrate. The process mineralogy analysis showed that the sulfur content reached 46.21%, and 81....
of 6