The anodic behavior of zinc electrodes is important for energy storage, corrosion protection, electrochemical processing, and other practical applications. This study investigates the anodic galvanostatic polarization of zinc foil and bulk electrodes...
Friction stir lap welding (FSLW) of 6061-T6 aluminium sheet and DX51D galvanized steel sheet was carried out by adding zinc foil to the lap interface and studying the influence of the zinc foil on the formation mechanisms and mechanical properties. T...
In this paper, we present zinc oxide (ZnO)-based flexible harvesting devices employing commercially available, cost-effective thin aluminum (Al) foils as substrates and conductive bottom electrodes. From the device fabrication point of view, Al-foils...
Beam-foil extreme-ultraviolet spectra of Sc, V, Cr, Mn, Co and Zn are presented that provide survey data of a single element exclusively. Various details are discussed in the context of line intensity ratios, yrast transitions, delayed spectra and pe...
Due to the feasibility of an electrically rechargeable zinc/air cell made of a zinc foil as active material, an aqueous choline acetate (ChAcO) mixture as an electrolyte and a spinel MnCo2O4 (MCO) and NiCo2O4 (NCO) as a bi-functional oxygen catalyst...
In this paper, the formation of rhombic ZnO microrods surrounded by ZnO nanorods was realized on the surfaces of zinc foils using a hydrothermal method. The photocatalytic degradation of Rhodamine B solution was used to test the photocatalytic perfor...
The aim of this work was to investigate the challenges associated with bonding Al-Mg alloys and develop a new method for bonding these alloys to steels. During an extensive R&D project, over 80 attempts, using 11 methods, were made to bond Al-6 w...
Foils of aluminum 1050 H14 ½ hard temper and 99.9% copper with 500-micron thickness have been used to manufacture similar and dissimilar composites by composite metal foil manufacturing (CMFM). The metal foils are bonded to each other using a...
Counterfeiting presents a major economic problem and an important risk for the public health and safety of individuals and countries. To make the counterfeiting process more difficult, and to ensure efficient authentication, a solution would be to at...
In this work we report on the fabrication process for the development of a flexible piezopolymeric transducer for health monitoring applications, based on lead-free, piezoelectric zinc oxide (ZnO) thin films. All the selected materials are compatible...
This study presents the results and information revealed by in-depth physicochemical investigations carried out on an 18th-century polychrome wooden pedestal of the holy relics of Saint Demetrius Basarabov preserved at the Romanian Patriarchy of Buch...
In this study, hydrogen (H2) and methane (CH4) were used as reactive gases, and chemical vapor deposition (CVD) was used to grow single-layer graphene on a copper foil substrate. The single-layer graphene obtained was transferred to a single-crystal...
Aqueous zinc batteries (AZBs) show promising applications in large-scale energy storage and wearable devices mainly because of their low cost and intrinsic safety. However, zinc metal anodes suffer from dendrite issues and side reactions, seriously h...
To unravel the influence of the temperature and plasma species on the growth of single-crystalline metal oxide nanostructures, zinc, iron, and copper foils were used as substrates for the study of nanostructure synthesis in the glow discharge of the...
One of the greatest challenges worldwide is containing the spread of problematic microorganisms. A promising approach is the use of antimicrobial coatings (AMCs). The antimicrobial potential of certain metals, including copper and zinc, has already b...
In this paper we report a low cost, simple, electrochemical method for large-area growth of single crystal ZnO nanorods. The method utilizes a metallic zinc foil as the source of the necessary zinc ions for ZnO growth on indium-doped tin oxide (ITO)...
Aqueous zinc ion batteries are considered to be one of the most promising battery types for stationary energy storage applications. Due to their aqueous electrolyte, they are inherently safe concerning flammability and environmentally friendly. In th...
Self-supporting electrode materials with the advantages of a simple operation process and the avoidance of the use any binders are promising candidates for supercapacitors. In this work, carbon-based self-supporting electrode materials with nanosheet...
Common kitchen wraps like plastic and aluminum foil create significant environmental burdens. Plastic wrap, typically made from non-renewable fossil fuels, often ends up in landfills for centuries, breaking down into harmful microplastics. Aluminum f...
Integrating a photoelectrode into a zinc-air battery is a promising approach to reducing the overpotential required for charging a metal-air battery by using solar energy. In this work, a photo-fuel cell employing a Nb2O5/CdS photoanode and a Zn foil...
We present a gas sensitive thin-film transistor (TFT) based on an amorphous Indium–Gallium–Zinc–Oxide (a-IGZO) semiconductor as the sensing layer, which is fabricated on a free-standing flexible polyimide foil. The photo-induced sensor response to NO...
Zinc-air batteries (ZABs) offer a sustainable and safe pathway to low-cost energy storage. Recent research shows that thermally-sintered porous Zn electrodes with a three-dimensional network structure can enhance the performance and lifetime of ZABs,...
There is a need for titanium (Ti), an antimicrobial implant coating that provides sustained protection against bacterial infection. Chitosan (CS) coatings, combined with halloysite nanotubes (HNTs), are an attractive solution due to the inherent bioc...
Electrochemical energy storage is considered a remarkable way to bridge the gap between demand and supply due to intermittent renewable energy production. All-solid-state batteries are an excellent alternative and are known to be the safest class of...
Zinc-ion hybrid capacitors (ZICs) can achieve high energy and power density, ultralong cycle life, and a wide operating voltage window, and they are widely used in wearable devices, portable electronics devices, and other energy storage fields. The d...
With growing environmental concerns and the need for sustainable energy, multifunctional materials that can simultaneously address water treatment and clean energy production are in high demand. In this study, we developed a cost-effective method to...
A flexible transparent heater is presented, based on an all-sprayed composite architecture of indium-doped zinc oxide (IZO) layers that sandwich a network of silver nanowires, on a polyimide-foil substrate. This architecture could be materialized thr...
Aqueous zinc–ion batteries (AZIBs) have garnered considerable attention owing to their inherent safety, cost-effectiveness, and promising electrochemical performance. However, challenges associated with Zn metal anodes, such as dendrite formati...
This paper compares and combines two common methods to improve the cycle performance of lithium metal (Li) electrodes. One technique is to establish a micro-structured current collector by chemical separation of a copper/zinc alloy. Furthermore, the...
Levels of lead (Pb) in tap water that are well below established guidelines are now considered harmful, so the detection of sub-parts-per-billion (ppb) Pb levels is crucial. In this work, we developed a two-step, facile, and inexpensive fabrication a...
Arsenic (As) contamination of the rice agro-ecosystem is a major concern for rice farmers of South East Asia as it imposes a serious threat to human and animal life; thus, there is an unrelenting need to explore the ways by which arsenic stress mitig...