Mechanical alloying is among the few cost effective techniques for synthesizing nanocrystalline alloy powders. This article reviews mechanical alloying or ball-milling of (NC) powders of Fe-Cr alloys of different compositions, and the remarkable oxid...
Nanocrystalline silicon oxide (nc-SiOx:H) is a multipurpose material with varied applications in solar cells as a transparent front contact, intermediate reflector, back reflector layer, and even tunnel layer for passivating contacts, owing to the ea...
Nanocrystalline hydrogenated silicon (nc-Si:H) substrate configuration n-i-p solar cells have been fabricated on soda lime glass substrates with active absorber layers prepared by plasma enhanced chemical vapor deposition (PECVD) and radio frequency...
The interconnection of different electronic devices or systems through cables is becoming more difficult due to the hard restrictions related to electromagnetic compatibility (EMC) in order to comply with requirements. Therefore, the use of EMC compo...
The ideal procedure to start designing an electronic device is to consider the electromagnetic compatibility (EMC) from the beginning. Even so, EMC problems can appear afterward, especially when the designed system is interconnected with external dev...
An overview of modern material science problems is presented for ultralightweight high-modulus commercial Al-Li-based alloys in historical retrospect. Numerous particular examples of the Soviet and Russian aviation whose various designs were made of...
Nanocrystalline (NC) metallic materials have better mechanical properties, corrosion behavior and biocompatibility compared with their coarse-grained (CG) counterparts. Recently, nanocrystalline metallic materials are receiving increasing attention f...
Doped hydrogenated nanocrystalline (nc-Si:H) and silicon oxide (nc-SiOx:H) materials grown by plasma-enhanced chemical vapor deposition have favourable optoelectronic properties originated from their two-phase structure. This unique combination of qu...
The present study examines the high-temperature (500–800 °C) oxidation behavior of Fe-10Cr-(3,5) Al alloys and studies the effect of nanocrystalline structure and Al content on their resistance to oxidation. The nanocrystalline (NC) alloy p...
High entropy alloys (HEAs) have attracted widespread interest due to their unique properties at many different length-scales. Here, we report the fabrication of nanocrystalline (NC) Al0.1CoCrFeNi high entropy alloy and subsequent small-scale plastic...
We attempted to design irbesartan nanocrystalline (IRB-NC) suspensions by the bead mill method, and we evaluated the bioavailability (BA) in the oral administration of the nanocrystalline drug. The mean particle size of the IRB-NC suspensions was app...
The role of grain size on the developed microstructure and mechanical properties of neutron irradiated nanocrystalline copper was investigated by comparing the radiation response of material to the conventional micrograined counterpart. Nanocrystalli...
We report plasma-enhanced chemical vapor deposition (PECVD) hydrogenated nano-crystalline silicon (nc-Si:H) thin films. In particular, the effect of hydrogen dilution ratio (R = H2/SiH4) on structural and optical evolutions of the deposited nc-Si:H f...
Bulk nanostructured materials (BNMs) are defined as polycrystalline bulk solids with nanocrystalline (NC) or ultrafine-grained (UFG) microstructures. [...]
Three-dimensional NAND flash memory with high carrier injection efficiency has been of great interest to computing in memory for its stronger capability to deal with big data than that of conventional von Neumann architecture. Here, we first report t...
Considering the metal-based nanocrystal (NC) hierarchical structure requirements in many real applications, starting from basic synthesis principles of electrostatic spinning technology, the formation of functionalized fibrous materials with inorgani...
Using the methods of transmission electron microscopy and energy-dispersive spectroscopy, we study the microstructure and phase composition of the coating and modified intermetallic layers obtained in a Ti-6Al-4V alloy by the deposition of the Al coa...
Anti-Stokes photoluminescence (ASPL), which is an up-conversion phonon-assisted process of the radiative recombination of photoexcited charge carriers, was investigated in methylammonium lead bromide (MALB) perovskite nanocrystals (NCs) with mean siz...
This paper proposes the effects of chamber pressures on the passivation layer of hydrogenated nano-crystalline silicon (nc-Si:H) mixed-phase thin film using microwave annealing (MWA) to achieve a high-quality thin film. The use of 40.68 MHz very-high...
This study investigates the use of nanocrystalline Cu (NC-Cu) to suppress interfacial voids in low-temperature Cu-Cu bonding for 3D IC packaging. We quantitatively compared the void characteristics of electrodeposited NC-Cu (grain size ~89.3 nm) and...
The development of new drugs is often hindered by low solubility in water, a problem common to nearly 90% of natural and/or synthetic molecules in the discovery pipeline. Nanocrystalline drug technology involves the reduction in the bulk particle siz...
Nanocrystalline (NC) materials have widespread industrial usage. X-ray and neutron diffraction techniques are primary tools for studying the structural and microstructural features of NC materials. Selected area electron diffraction (SAED) patterns c...
The nanocomposites of activated-carbon-decorated silicon nanocrystals (AC<nc-Si>AC) were synchronously derived in a single step from biomass rice husks, through the simple route of the calcination method together with the magnesiothermic reduct...
We report on cooperative grain rotation accompanied by a strong Bauschinger effect in nanocrystalline (nc) palladium thin film. A thin film of nc Pd was subjected to cyclic loading–unloading using in situ TEM nanomechanics, and the evolving microstru...
The strength of nanocrystalline (NC) metal has been found to be sensitive to strain rate. Here, by molecular dynamics simulation, we explore the strain rate effects on apparent Young’s modulus, flow stress and grain growth of NC gold with small...
Characterization of functional nanocrystalline materials in terms of quantitative determination of size, size dispersion, type, and extension of exposed facets still remains a challenging task. This is particularly the case of anisotropically shaped...
Nanoindentation morphologies of crystalline copper have been probed at the grain scale. Experimental tests have been conducted on nanocrystalline (NC), ultrafine-grained (UFG), and coarse-grained (CG) copper samples with a new Berkvoich indenter at t...
Principal slip zones (PSZs) are narrow (<10 cm) bands of localized shear deformation that occur in the cores of upper-crustal fault zones where they accommodate the bulk of fault displacement. Natural and experimentally-formed PSZs consistently sh...
Herein we demonstrate a novel plating bath, free from cyanide, to plate a highly adherent nanocrystalline copper-silver (ncCuAg) coating on a stainless-steel substrate and its application as an antimicrobial coating. The microstructures, such as the...
The objective of this study was to develop a micromechanical approach for determining the Mie–Grüneisen EOS parameters of iron under the Hugoniot states. The multiscale shock technique (MSST) coupled with molecular dynamics (MD) simulations was emplo...
In this report, we demonstrated the formation of a biomimetic mineralizing layer obtained on the surface of dental enamel (biotemplate) using bioinspired nanocrystalline carbonate-substituted calcium hydroxyapatite (ncHAp), whose physical and chemica...
This paper presents an isolated DC-DC converter with high voltage gain that features an advanced inter-built nanocrystalline-core medium-frequency transformer (NC-MFT). The isolated DC-DC converter with an NC-MFT is specifically designed for applicat...
Celecoxib (CLX), a selective COX-2 inhibitor, is a biopharmaceutics classification system (BCS) class II drug with its bioavailability being limited by thepoor aqueoussolubility. The purpose of this study was to develop and optimize CLX nanocrystalli...
In the present work, modified embedded atom potential and large-scale molecular dynamics’ simulations were used to explore the effect of grain boundary (GB) segregated foreign interstitials on the deformation behavior of nanocrystalline (nc) ir...
Nanostructuring is a commonly employed method of obtaining superior mechanical properties in metals and alloys. Compared to conventional polycrystalline counterparts, nanostructuring can provide remarkable improvements in yield strength, toughness, f...
A deeper understanding of the mechanical behavior of ultra-fine (UF) and nanocrystalline (NC) grained metals is necessary with the growing interest in using UF and NC grained metals for structural applications. The cyclic deformation response and beh...
Helium bubbles are known to form in nuclear reactor structural components when displacement damage occurs in conjunction with helium exposure and/or transmutation. If left unchecked, bubble production can cause swelling, blistering, and embrittlement...
Olaparib (OLA) is an anticancer agent that acts by inhibiting the poly (ADP-ribose)-polymerase-I (PARP-I). Due to its low solubility and low permeability, it has been placed as a BCS Class-IV drug and hence its clinical use is limited. In this study,...
Nanocrystalline cellulose (NC) and a lignin-containing fraction (LF) were obtained from egagropili, the so called sea balls produced from rhizome and stem fragments of Posidonia oceanica that accumulate in large amounts along the coastal beaches in t...
Nanoplasmonic structures have emerged as a promising approach to address light trapping limitations in thin-film optoelectronic devices. This study investigates the integration of metallic nanoparticle arrays onto nanocrystalline silicon (nc-Si:H) th...
The development of hierarchically structured zeolites to mitigate diffusion limitations and improve catalytic performance constitutes a focus of current research. In this study, we present the synthesis of hierarchical disk-shaped MTW zeolite (ZSM-12...
Mesoscopic anatase nanocrystalline TiO2 (nc-TiO2) electrodes play effective and efficient catalytic roles in photoelectrochemical (PEC) H2O oxidation under short circuit energy gap excitation conditions. Interfacial molecular orbital structures of...
Background: Nanocrystals, a carrier-free nanotechnology, offer significant advantages for pulmonary drug delivery by enhancing the dissolution and solubility of poorly soluble drugs while maintaining favorable biological properties and low toxicity....
This study investigated the impact of the nanocrystalline atomic layer-deposited hydroxyapatite (ALD-HA) coating of titanium (Ti) surface on the attachment and proliferation of human gingival fibroblasts (HGFs). Ti discs were divided into ALD-HA-coat...
This study evaluates two multiscale models to determine their ability to describe the effect of grain size (GS) on the plastic behavior of ultrafine-grained (UFG) and nanocrystalline (NC) materials. One model follows the Hall–Petch type (Model-...
Ganoderma lucidum mushroom-mediated green synthesis of nanocrystalline titanium dioxide (TiO2) is explored via a low-temperature (≤70 °C) wet chemical method. The role of Ganoderma lucidum mushroom extract in the reaction is to release the gan...
The binary metal oxide mesoporous interfacial layers (bi-MO meso IF layer) templated by a graft copolymer are synthesized between a fluorine-doped tin oxide (FTO) substrate and nanocrystalline TiO2 (nc-TiO2). Amphiphilic graft copolymers, Poly(epichl...
In this paper, the fatigue resistance of superelastic NiTi shape memory alloy (SMA) wires was improved by combining mechanical training and nanocrystallization. Fatigue tests were performed after mechanical training with a peak stress of 600 MPa for...
We report on the tunnel oxide passivated contact (TOPCon) using a crystalline nanostructured silicon-based layer via an experimental and numerical simulation study. The minority carrier lifetime and implied open-circuit voltage reveals an ameliorated...
This study presents a novel method combining photoelectrochemical etching with ultrasonic vibration for the formation of nanocrystalline porous silicon (NC-PS). This combined process enhances the band gap energy absorption (BEA) by reducing bubble ac...
of 2