Skip to Content

23 Results Found

  • Review
  • Open Access
78 Citations
14,125 Views
32 Pages

Recent Developments in Laser Welding of Aluminum Alloys to Steel

  • Daniel Wallerstein,
  • Antti Salminen,
  • Fernando Lusquiños,
  • Rafael Comesaña and ,
  • Jesús del Val García,
  • Antonio Riveiro Rodríguez,
  • Aida Badaoui and
  • Juan Pou
  • + 3 authors+ 0 author

12 April 2021

The development of high-performance dissimilar aluminum–steel joints is necessary to promote the feasibility of multi-material design and lightweight manufacturing. However, joining aluminum to steel is a challenging task mainly due to the formation...

  • Article
  • Open Access
3 Citations
3,224 Views
18 Pages

Additive Manufacturing of Thermoset Elastomer–Thermoplastic Composites Using Dual-Extrusion Printing

  • Nathalia Diaz Armas,
  • Geet Bhandari,
  • Stiven Kodra,
  • Jinde Zhang and ,
  • David Kazmer and
  • Joey Mead
  • + 1 author+ 0 author

28 June 2025

This work investigated the 3D printing of fully compounded thermoset elastomers using a custom-designed printer capable of processing both thermoplastics and elastomers containing fillers and specific cure packages. The adhesion strength between sele...

(This article belongs to the Special Issue Research on Additive Manufacturing of Polymer Composites)
  • Article
  • Open Access
897 Views
26 Pages

Effect of Monomaterial and Multimaterial Packaging on the Stability of Bioactive Compounds and Lipid Oxidation in Roasted Arabica Coffee

  • Daniel Velloso Cabral,
  • Roberto Braz da Silva Filho,
  • Tatianne Ferreira de Oliveira,
  • Claudio Fernandes Cardoso and ,
  • Alessandra Lopes de Oliveira,
  • Julio Cesar Colivet Briceno and
  • Flávio Alves da Silva
  • + 2 authors+ 0 author

27 May 2026

Coffee has a complex aroma, over 1000 volatile compounds, and high lipid content. However, it is prone to volatile loss and lipid oxidation during storage. This makes packaging critical for quality preservation. This study evaluated monomaterial and...

(This article belongs to the Special Issue Advanced Bioprocesses for the Valorization of Agroindustrial Waste into Probiotic Foods and Bioactive Compounds)
  • Article
  • Open Access
8 Citations
4,350 Views
13 Pages

21 May 2020

Combining stainless steel with zirconia components by powder technological shaping routes for manufacturing of multifunctional parts is an advantageous and promising one-step method making expensive and time-consuming additional joining steps redunda...

(This article belongs to the Special Issue Advances in Structural Ceramic Materials)
  • Review
  • Open Access
16 Citations
8,650 Views
25 Pages

Semiconductor Multimaterial Optical Fibers for Biomedical Applications

  • Lingyu Shen,
  • Chuanxin Teng,
  • Zhuo Wang,
  • Hongyi Bai and ,
  • Santosh Kumar and
  • Rui Min
  • + 1 author+ 0 author

17 October 2022

Integrated sensors and transmitters of a wide variety of human physiological indicators have recently emerged in the form of multimaterial optical fibers. The methods utilized in the manufacture of optical fibers facilitate the use of a wide range of...

(This article belongs to the Special Issue New Progress in Optical Fiber-Based Biosensors)
  • Feature Paper
  • Article
  • Open Access
9 Citations
4,053 Views
20 Pages

Thicknesses/Roughness Relationship in Mg-Al-Mg and Mg-Ti-Mg Hybrid Component Plates for Drilled Aeronautical Lightweight Parts

  • David Blanco,
  • Eva María Rubio,
  • José Manuel Sáenz de Pipaón and
  • Marta María Marín

19 November 2020

Multimaterial hybrid compounds formed from lightweight structural materials have been acquiring great importance in recent years in the aeronautical and automotive sectors, where they are replacing traditional materials to reduce the mass of vehicles...

(This article belongs to the Special Issue Special Issue of the Manufacturing Engineering Society 2020 (SIMES-2020))
  • Article
  • Open Access
15 Citations
4,787 Views
15 Pages

Development of Hot-Wire Laser Additive Manufacturing for Dissimilar Materials of Stainless Steel/Aluminum Alloys

  • Keita Marumoto,
  • Takahiro Horai,
  • Daiji Morita,
  • Chisako Oda and ,
  • Takafumi Fujii,
  • Takashi Yuzawa,
  • Ryogo Koba and
  • Motomichi Yamamoto
  • + 3 authors+ 0 author

The formation of brittle intermetallic compounds (IMCs) at the interface between dissimilar materials causes considerable problems. In this study, a multi-material additive manufacturing technique that employs a diode laser and the hot-wire method wa...

(This article belongs to the Special Issue Advanced Welding Processes, Additive Manufacturing and Numerical Models)
  • Article
  • Open Access
7 Citations
3,896 Views
14 Pages

9 October 2023

Reducing the weight of parts through lightweight designs impacts CO2 emissions, especially in the automotive and transportation sectors, which have significant fuel and electric energy consumption. Using multi-material design approaches, specific mat...

(This article belongs to the Special Issue Advances in Mechanical Joining Technologies)
  • Review
  • Open Access
2 Citations
1,382 Views
22 Pages

27 April 2026

This study presents a comprehensive bibliometric analysis of research on 2xxx series aluminum–copper (Al–Cu) alloys published between 2020 and 2025. A complete analysis of 4380 documents from 747 sources indexed in Scopus reveals sustaine...

  • Article
  • Open Access
1 Citations
1,206 Views
14 Pages

5 August 2025

Direct copper-plated ceramic (DPC) substrates have emerged as a favored solution for power device packaging due to their unique technical advantages. AuSn, characterized by its high hermeticity and environmental adaptability, represents the optimal s...

(This article belongs to the Section Advanced and Functional Ceramics and Glasses)
  • Review
  • Open Access
1,103 Views
54 Pages

Forming Technologies, Defect Control, and Digital Manufacturing of Polymer Composite Battery-Pack Structures for New Energy Vehicles: A Comprehensive Review

  • Guangxi Li,
  • Longzhan Zheng,
  • Xufeng Song,
  • Xiaolu Liao and ,
  • Qingqing Lü,
  • Liquan Yang,
  • Qun Li,
  • Yuqin Ma and
  • Yinshu Yao
  • + 4 authors+ 0 author

21 August 2026

Battery packs for new energy vehicles have evolved from simple load-bearing and protective assemblies into multifunctional safety structures integrating structural support, crash protection, thermal-runaway mitigation, flame retardancy, electrical in...

  • Review
  • Open Access
2 Citations
1,131 Views
86 Pages

Friction stir welding (FSW) began as a fairly specialized joining method, but over the past three decades it has evolved into something considerably more versatile, a manufacturing platform that now handles complex multi-material assemblies and solid...

(This article belongs to the Special Issue Recent Advances in Welding and Joining Metallic Materials)
  • Article
  • Open Access
12 Citations
3,845 Views
14 Pages

27 March 2020

Brittle intermetallic phases are formed when steel and aluminum are joined. Therefore, it is difficult to use this combination of materials when applying the multimaterial design in the construction of load-adapted and weight-adapted structures. In o...

  • Article
  • Open Access
4 Citations
3,680 Views
12 Pages

Joint Properties of Aluminum Alloy and Galvanized Steel by AC Pulse MIG Braze Welding

  • Chan-Seung Ro,
  • Kyoung-Hak Kim,
  • Hee-Seon Bang and
  • Hye-Seul Yoon

31 May 2021

In response to global environment and fuel efficiency regulations aiming to reduce CO2 emissions, multi-material structures that use lightweight materials are currently being developed to realize the weight reduction of vehicles in automotive manufac...

(This article belongs to the Topic Metallurgical and Materials Engineering)
  • Article
  • Open Access
20 Citations
4,304 Views
10 Pages

Influence of Temperature on the Composition and Calorific Value of Gases Produced during the Pyrolysis of Waste Pharmaceutical Blisters

  • Katarzyna Klejnowska,
  • Krzysztof Pikoń,
  • Waldemar Ścierski,
  • Krzysztof Skutil and
  • Magdalena Bogacka

21 January 2020

Waste pharmaceutical blisters (WPBs) are a type of multimaterial waste that contain layers of plastic and metal connected permanently. The separation of those materials with the application of mechanical methods is impossible. One of the methods that...

(This article belongs to the Special Issue Sustainable Polymer Technologies for a Circular Economy)
  • Article
  • Open Access
164 Views
16 Pages

3 November 2026

Multi-material mixed structures (MMMS) are becoming increasingly important to meet the demand for lightweighting in the automotive industry. In this study, the joining of 2.5 mm thick Al 5052 alloy and 1.4 mm thick DP 590 steel sheets was conducted u...

(This article belongs to the Collection Welding and Joining Processes of Materials)
  • Communication
  • Open Access
54 Citations
9,361 Views
10 Pages

3D Printing of Functional Assemblies with Integrated Polymer-Bonded Magnets Demonstrated with a Prototype of a Rotary Blood Pump

  • Kai Von Petersdorff-Campen,
  • Yannick Hauswirth,
  • Julia Carpenter,
  • Andreas Hagmann and ,
  • Stefan Boës,
  • Marianne Schmid Daners,
  • Dirk Penner and
  • Mirko Meboldt
  • + 3 authors+ 0 author

1 August 2018

Conventional magnet manufacturing is a significant bottleneck in the development processes of products that use magnets, because every design adaption requires production steps with long lead times. Additive manufacturing of magnetic components deliv...

(This article belongs to the Special Issue Biofabrication: From Additive Bio-Manufacturing to Bioprinting)
  • Feature Paper
  • Article
  • Open Access
27 Citations
6,072 Views
12 Pages

Joining of Aluminum Alloy AA7075 and Titanium Alloy Ti-6Al-4V through a Friction Stir Welding-Based Process

  • Francisco Dias,
  • Gonçalo Cipriano,
  • Arménio N. Correia,
  • Daniel F. O. Braga and ,
  • Pedro Moreira and
  • Virgínia Infante
  • + 1 author+ 0 author

28 January 2023

Combining dissimilar parts has become imperative for developing the structures based on lightweight materials, such as metal alloys, polymers or polymer matrix composites, and this has become one of the solutions to reverse the current trend of CO2 e...

(This article belongs to the Section Welding and Joining)
  • Review
  • Open Access
8 Citations
2,830 Views
32 Pages

The Role of 3D Printing in Regenerative Medicine: A Game-Changer in Tissue Engineering

  • Ameya Sharma,
  • Vivek Puri,
  • Kampanart Huanbutta and
  • Tanikan Sangnim

In regenerative medicine, three-dimensional (3D) printing provides precise spatial control over the fabrication of complex, biomimetic tissue constructs, enabling the production of architecturally defined and functionally tailored scaffolds. By enabl...

(This article belongs to the Special Issue Tissue Engineering Related Biomaterials: Progress and Challenges)
  • Article
  • Open Access
37 Citations
5,078 Views
18 Pages

2 January 2021

In this study, a laminated composite damping structure (LCDS) with metal rubber (MR) as matrix and silicone rubber (SR) as reinforcement has been designed. The embedded interlocking structure formed by the multi-material interface of the LCDS can eff...

(This article belongs to the Section Porous Materials)
  • Article
  • Open Access
7 Citations
4,244 Views
26 Pages

Induction Heating of Laminated Composite Structures with Magnetically Responsive Nanocomposite Interlayers for Debonding-on-Demand Applications

  • Eleni Gkartzou,
  • Konstantinos Zafeiris,
  • Christos Tsirogiannis,
  • Alberto Pedreira and ,
  • Adrián Rodríguez,
  • Pablo Romero-Rodriguez,
  • Giorgos P. Gakis,
  • Tatjana Kosanovic-Milickovic,
  • Apostolos Kyritsis and
  • Costas A. Charitidis
  • + 5 authors+ 0 author

30 September 2024

In the present study, the feasibility to achieve localized induction heating and debonding of multi-material composite structures is assessed in testing coupons prepared by Automated Fiber Placement (AFP) and extrusion-based additive manufacturing (A...

(This article belongs to the Special Issue Polymeric Materials and Their Application in 3D Printing, 2nd Edition)
  • Review
  • Open Access
250 Views
37 Pages

24 October 2026

Bigels are biphasic gel systems formed by combining oleogels and hydrogels. Bigels can encapsulate both hydrophilic and hydrophobic substances and have attracted interest as edible inks in the 3D printing of functional foods and sensors. This review...

(This article belongs to the Special Issue Food Gels: Structure and Properties (3rd Edition))
  • Article
  • Open Access
270 Views
26 Pages

Lightweight multi-material structures that pair aluminum with magnesium are increasingly sought in the transport and aerospace sectors, yet sound dissimilar Al–Mg joints remain difficult to obtain because the two metals readily form hard, britt...

(This article belongs to the Special Issue Advances in Welding Technology: 2nd Edition)