Skip to Content

155 Results Found

  • Review
  • Open Access
43 Citations
8,676 Views
20 Pages

Effect of Alloying and Microalloying Elements on Carbides of High-Speed Steel: An Overview

  • Yangmin Chen,
  • Chenghuan Ye,
  • Xiangru Chen,
  • Qijie Zhai and
  • Henry Hu

1 February 2024

In high-speed steel, carbides are essential phase constituents, which have a direct impact on engineering performance and qualities of high-speed steel. The formation, morphology, and distribution of carbides are dictated by alloying elements. In thi...

  • Feature Paper
  • Article
  • Open Access
7 Citations
3,864 Views
12 Pages

17 October 2022

The recrystallization kinetics of two cold-rolled high strength low alloy steels with the addition of Ti and Ti-V, respectively, during annealing were investigated by means of modeling and experimental validation. The recrystallization kinetics of th...

(This article belongs to the Special Issue Advanced Technology in Microalloyed Steels)
  • Article
  • Open Access
577 Views
14 Pages

This study investigates the 55%Al-Zn-Si coating system. Using microstructural characterization and thermodynamic simulation, we systematically analyzed its microstructure formation, solidification behavior, and the regulatory effects of Cr, Nb, and V...

(This article belongs to the Section Metal Surface Process)
  • Article
  • Open Access
22 Citations
5,534 Views
21 Pages

Effect of Nb and Mo Additions in the Microstructure/Tensile Property Relationship in High Strength Quenched and Quenched and Tempered Boron Steels

  • Irati Zurutuza,
  • Nerea Isasti,
  • Eric Detemple,
  • Volker Schwinn and ,
  • Hardy Mohrbacher and
  • Pello Uranga
  • + 1 author+ 0 author

25 December 2020

Recently, advanced thermomechanical hot rolling schedules followed by direct quenching are being developed in order to avoid reheating and quenching treatment after hot rolling to eliminate an energy and cost consuming step. The use of boron as an al...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Review
  • Open Access
16 Citations
4,004 Views
20 Pages

Micro-Alloying Effects on Microstructure and Weldability of High-Strength Low-Alloy Steel: A Review

  • Jian Chen,
  • Zhongran Shi,
  • Xiaobing Luo,
  • Feng Chai and ,
  • Tao Pan,
  • Guanghong Feng and
  • Caifu Yang
  • + 2 authors+ 0 author

26 February 2025

High-strength low-alloy (HSLA) steels have garnered significant attention owing to their widespread applications across various industries, with weldability being a particularly critical aspect. However, the impact toughness of the coarse-grained hea...

  • Review
  • Open Access
1 Citations
636 Views
39 Pages

30 June 2026

This review focuses on the effects of trace and residual rare-earth elements on inclusion evolution and Nb–Ti–V precipitation behavior in microalloyed steels. Existing studies indicate that trace rare-earth elements can transform conventi...

(This article belongs to the Section Metals and Alloys)
  • Feature Paper
  • Article
  • Open Access
27 Citations
5,249 Views
20 Pages

Toughness Property Control by Nb and Mo Additions in High-Strength Quenched and Tempered Boron Steels

  • Irati Zurutuza,
  • Nerea Isasti,
  • Eric Detemple,
  • Volker Schwinn and ,
  • Hardy Mohrbacher and
  • Pello Uranga
  • + 1 author+ 0 author

5 January 2021

The synergetic effect on hardenability by combining boron with other microalloying elements (such as Nb, Mo and Nb + Mo) is widely known for high-strength medium carbon steels produced by direct quenching and subsequent tempering treatment. The impro...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Review
  • Open Access
26 Citations
5,053 Views
11 Pages

18 April 2022

In the 14th Five Year Plan, China clearly proposes to develop the automobile strategic industry, reduce the carbon emission intensity, and formulates the carbon emission peak plan by 2030. As the automobile is the most frequently used vehicle, weight...

  • Article
  • Open Access
2 Citations
1,243 Views
20 Pages

Enhancing Electrochemical Kinetics and Stability of Biodegradable Mg-Y-Zn Alloys with LPSO Phases via Strategic Micro-Alloying with Ca, Sr, Mn, and Zr

  • Lisha Wang,
  • Huiping Wang,
  • Chenchen Zhang,
  • Wei Sun and ,
  • Yue Wang,
  • Lijuan Wang and
  • Xiaoyan Kang
  • + 2 authors+ 0 author

11 July 2025

This study systematically investigated the effects of biologically relevant microalloying elements—calcium (Ca), strontium (Sr), manganese (Mn), and zirconium (Zr)—on the electrochemical behavior of Mg-Y-Zn alloys containing long-period s...

(This article belongs to the Special Issue Advances in High-Performance Alloys)
  • Article
  • Open Access
4 Citations
1,721 Views
14 Pages

The Influence of Er and Zr on the Microstructure and Durability of the Mechanical Properties of an Al-Mg Alloy Containing 7 wt.% of Mg

  • Kamila Limanówka,
  • Sonia Boczkal,
  • Monika Mitka,
  • Elżbieta Szymańska and ,
  • Joanna Hrabia-Wiśnios,
  • Dawid Kapinos,
  • Bogusław Augustyn,
  • Renata Skrzyńska,
  • Łukasz Grzebinoga and
  • Tomasz Czeppe
  • + 7 authors+ 2 authors

31 October 2024

Al-Mg alloys are characterized by permanent solid solution hardening and can additionally be work-hardened. The high mechanical properties of Al-Mg alloys with above-standard Mg content obtained after plastic deformation processes decrease over time....

(This article belongs to the Special Issue Characterization, Properties, and Applications of New Metallic Alloys)
  • Article
  • Open Access
48 Citations
8,091 Views
17 Pages

The Influence of La and Ce Addition on Inclusion Modification in Cast Niobium Microalloyed Steels

  • Hadi Torkamani,
  • Shahram Raygan,
  • Carlos Garcia Mateo,
  • Jafar Rassizadehghani and ,
  • Javier Vivas,
  • Yahya Palizdar and
  • David San-Martin
  • + 2 authors+ 0 author

15 September 2017

The main role of Rare Earth (RE) elements in the steelmaking industry is to affect the nature of inclusions (composition, geometry, size and volume fraction), which can potentially lead to the improvement of some mechanical properties such as the tou...

(This article belongs to the Special Issue Advances in Microalloyed Steels)
  • Communication
  • Open Access
9 Citations
2,786 Views
9 Pages

Roles of Sc and Ag Microalloying Elements in the Mechanical Properties of Al-Zn-Mg-Cu (Al7xxx) Alloy

  • Sung-Jae Won,
  • Hyeongsub So,
  • Jung-Woo Han,
  • Soong Ju Oh and
  • Kyou-Hyun Kim

27 January 2023

In this study, we use microstructural investigation to examine the effects of Sc and Ag microalloying elements on the mechanical properties of Al-Zn-Mg-Cu-based (7050) alloy. Macroscopically, Sc and Ag microalloying elements significantly reduce the...

(This article belongs to the Special Issue Aluminium Alloys: Microstructure, Properties, Heat Treatment, Forming and Welding)
  • Article
  • Open Access
25 Citations
3,942 Views
13 Pages

8 April 2024

The present investigation endeavors to explore the influence of rare earth elements on the strength and plasticity characteristics of low-carbon microalloyed steel under tensile loading conditions. The findings from the conducted tensile tests indica...

(This article belongs to the Special Issue Mechanical Behavior of Composite Materials (3rd Edition))
  • Article
  • Open Access
12 Citations
3,304 Views
12 Pages

15 December 2021

Two oxide-dispersion-strengthened (ODS) steels with different compositions (14Cr-ODS and 14Cr-Zr-ODS) were investigated to reveal the influences of microalloying element addition on the microstructure and to clarify the refining mechanism of precipit...

  • Article
  • Open Access
521 Views
17 Pages

12 June 2026

Scandium (Sc) is well recognized as a potent grain refiner, yet optimizing its addition amount in the Al-Cu-Mg-Ni-Fe (A242) system remains a longstanding challenge, critically important for material performance in high-temperature automotive and aero...

(This article belongs to the Special Issue State of the Art of Crystalline Metals and Alloys)
  • Article
  • Open Access
4 Citations
3,234 Views
19 Pages

18 February 2023

Bake hardening (BH) is a vital part of special steel production. Studies in this field have focused on steels under homogeneous yielding, but until now, none have been conducted on the phenomena that occur for steels under heterogeneous yielding. In...

(This article belongs to the Special Issue Mechanical Properties and Microstructural Features of Alloy/Steel)
  • Article
  • Open Access
5 Citations
4,385 Views
19 Pages

Dissolution of Microalloying Elements in a Ladle Metallurgy Furnace

  • Ogochukwu Queeneth Duruiheme,
  • Xipeng Guo,
  • Nicholas Walla and
  • Chenn Zhou

17 February 2023

Industrial fusion of microalloying elements in steelmaking is imperative in defining and optimizing certain steel properties due to their strengthening and significant grain refinements effects at minute quantities. Copper, vanadium, and columbium ar...

  • Article
  • Open Access
2 Citations
1,866 Views
13 Pages

9 November 2023

An investigation was conducted through directional solidification experiments to explore the impact of micro-alloying element Sn and a magnetic field on the solidification behavior of immiscible Al–Bi alloys, as well as the combined effect of S...

  • Review
  • Open Access
53 Citations
9,763 Views
24 Pages

25 July 2023

An Al-Zn-Mg-Cu alloy has high specific strength, good corrosion resistance, fracture toughness and fatigue resistance. It is one of the most important structural materials in the fields of aviation, aerospace, weapons and transportation; in particula...

  • Article
  • Open Access
3 Citations
1,144 Views
16 Pages

30 June 2025

The research focuses on how the samarium (Sm) addition amount affects the microstructural development, mechanical characteristics, and thermal conductivity of Al-5wt%Ni alloys. Microstructural characterization revealed that minor Sm additions concurr...

(This article belongs to the Special Issue Design, Development and Processing of Aluminium Alloys and Their Composite Materials)
  • Article
  • Open Access
1 Citations
1,307 Views
43 Pages

Effect of Rare-Earth Element Microdoping on Ti–6Al–7Nb Alloys for Biomedical Applications: Materials Characterization and In Vivo Biocompatibility Tests

  • Alexander Anokhin,
  • Andrey Kirsankin,
  • Elena Ermakova,
  • Maria Chuvikina and ,
  • Alexander Luk’yanov,
  • Svetlana Strelnikova,
  • Elena Kukueva,
  • Nataliya Kononovich,
  • Konstantin Kravchuk and
  • Joydip Joardar
  • + 5 authors+ 0 author

12 February 2026

The paper focuses on materials characterization and in vivo biocompatibility tests of Ti–6Al–7Nb–0.3REE wt.% alloys (REEs—Y, Ce, La) for use as a promising material to produce personalized medical implants and shed light on po...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
3 Citations
1,169 Views
15 Pages

Titanium Modulated the Occurrence States and Strain Aging Resistance of Residual Element Nitrogen in Scrap-Based Low-Alloy Steels

  • Yuhe Huang,
  • Haisheng Yang,
  • Jun Lu,
  • Jing Wang and ,
  • Bicao Peng,
  • Junheng Gao,
  • Haitao Zhao,
  • Honghui Wu,
  • Chaolei Zhang and
  • Xinping Mao
  • + 6 authors+ 1 author

23 October 2025

The steel industry is responsible for 7–9% of global CO2 emissions. Shifting from primary iron ore to recycled scrap in electric arc furnace (EAF) steelmaking offers significant decarbonization potential, reducing carbon intensity by 60–7...

(This article belongs to the Special Issue Microstructure, Mechanical and Corrosion Properties of Metals, Alloys, and Composite Materials)
  • Article
  • Open Access
490 Views
18 Pages

19 June 2026

In this study, manual welding electrodes with varying niobium (Nb) contents (0, 0.05, and 0.1 wt%) were developed for 960 MPa grade low-alloy high-strength steel, and deposited metals were produced through multilayer multipass welding. Microstructura...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
15 Citations
3,721 Views
17 Pages

Characterization of Nanosized Carbide Precipitates in Multiple Microalloyed Press Hardening Steels

  • Hardy Mohrbacher,
  • Linda Bacchi,
  • Gloria Ischia,
  • Stefano Gialanella and ,
  • Michele Tedesco,
  • Fabio D'Aiuto and
  • Renzo Valentini
  • + 2 authors+ 0 author

5 May 2023

Press hardening steel standardly relies on titanium microalloying for protecting boron from being tied up by residual nitrogen. This practice safeguards the hardenability effect of boron during die quenching. More recently, additional microalloying e...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Review
  • Open Access
1,252 Views
18 Pages

A Critical Review of Homogenization and Aging Behaviors of Micro-Alloyed 7xxx Al Alloy for Advanced Aerospace Application

  • Gurudas Mandal,
  • Rahul Samanta,
  • Sandip Kunar,
  • Amitava Ghatak and ,
  • Habib Masum,
  • Aman Gupta and
  • Guojun Ma
  • + 2 authors+ 0 author

29 July 2026

In the aircraft industry, with the growing demand for advanced, sustainable structural materials, researchers are increasingly focusing on developing Al-Zn-Mg-Cu alloys, particularly the Al 7075 alloy with micro-alloying elements. However, load and e...

(This article belongs to the Special Issue Microstructure, Properties and Characterization of Aluminum Alloys)
  • Review
  • Open Access
79 Citations
11,303 Views
17 Pages

Grain Refinement of Aluminum and Aluminum Alloys by Sc and Zr

  • Zhiguo Lei,
  • Shengping Wen,
  • Hui Huang,
  • Wu Wei and
  • Zuoren Nie

12 April 2023

Rare earth elements and transition elements are widely used in aluminum alloys, magnesium alloys and copper alloys due to their unique microalloying effects. With regard to in-depth research on the grain refinement characteristics of rare earth eleme...

(This article belongs to the Special Issue Solidification and Casting of Metals and Alloys)
  • Article
  • Open Access
2 Citations
2,170 Views
9 Pages

The Effect of Ca and Mg on the Microstructure and Tribological Properties of YPbSn10 Antifriction Alloy

  • Vasile Avram,
  • Ioana Csaki,
  • Ileana Mates,
  • Nicolae Alexandru Stoica and ,
  • Alina-Maria Stoica and
  • Augustin Semenescu
  • + 1 author+ 0 author

4 May 2022

An alloy YPbSn10 used for antifriction applications was synthetized in a furnace and the structure was improved by a microalloying technique. The elements chosen for microalloying were Ca 2%wt and Mg 2%wt. The microalloying technique proved to have g...

(This article belongs to the Special Issue Structure and Mechanical Properties of Alloys, Volume II)
  • Article
  • Open Access
35 Citations
7,238 Views
19 Pages

Comparative Effect of Mo and Cr on Microstructure and Mechanical Properties in NbV-Microalloyed Bainitic Steels

  • Andrii Kostryzhev,
  • Navjeet Singh,
  • Liang Chen,
  • Chris Killmore and
  • Elena Pereloma

16 February 2018

Steel product markets require the rolled stock with further increasing mechanical properties and simultaneously decreasing price. The steel cost can be reduced via decreasing the microalloying elements contents, although this decrease may undermine t...

(This article belongs to the Special Issue Advances in Microalloyed Steels)
  • Review
  • Open Access
19 Citations
5,132 Views
20 Pages

13 January 2025

Research on micro-alloyed steel is a strategic measure to meet the needs of various industries and promote green development, and it is essential for many major steel-producing countries. Currently, the mainstream micro-alloying elements in the resea...

(This article belongs to the Special Issue Research on the Microstructure and Properties of Metal Alloys)
  • Article
  • Open Access
13 Citations
5,435 Views
20 Pages

Microstructure and Mechanical Properties of Nb and V Microalloyed TRIP-Assisted Steels

  • Olli Oja,
  • Ari Saastamoinen,
  • Madan Patnamsetty,
  • Mari Honkanen and ,
  • Pasi Peura and
  • Martti Järvenpää
  • + 1 author+ 0 author

14 August 2019

The intercritical annealing and isothermal bainitic processing response was studied for three Nb and V microalloyed Transformation-Induced Plasticity (TRIP)-assisted 980 MPa grade steels. Their mechanical and microstructural properties were compared...

(This article belongs to the Special Issue TRIP Steels)
  • Article
  • Open Access
60 Citations
9,707 Views
18 Pages

22 February 2017

Low carbon microalloyed steels show interesting commercial possibilities by combining different “micro”-alloying elements when high strength and low temperature toughness properties are required. Depending on the elements chosen for the chemistry des...

(This article belongs to the Special Issue Bainite and Martensite: Developments and Challenges)
  • Article
  • Open Access
6 Citations
2,182 Views
13 Pages

Austenite Growth Behavior and Prediction Modeling of Ti Microalloyed Steel

  • Jun Wang,
  • Man Liu,
  • Lifan Wang,
  • Ping He and ,
  • Haijiang Hu and
  • Guang Xu
  • + 1 author+ 0 author

1 July 2024

Previous studies on the austenite grain growth were mostly based on a fixed temperature, and the relationship between the austenite grain and austenitizing parameters was fitted according to the results. However, there is a lack of quantitative resea...

(This article belongs to the Special Issue Microstructure, Mechanical Properties and Wear Performance of High-Strength Steels)
  • Article
  • Open Access
3 Citations
1,190 Views
25 Pages

29 October 2025

Crystal grain size control in steel is critical for achieving mechanical properties. This study investigates the effectiveness of microalloying with titanium, niobium, zirconium, and yttrium to inhibit grain growth with the pinning effect. The compar...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Feature Paper
  • Article
  • Open Access
6 Citations
3,435 Views
9 Pages

Influence of Sc Microalloying on the Microstructure of Al5083 Alloy and Its Strengthening Effect

  • Ji-Hoon Park,
  • Kee-Ahn Lee,
  • Sung-Jae Won,
  • Yong-Bum Kwon and
  • Kyou-Hyun Kim

14 July 2021

In this study, we investigate the influence of Sc microalloying on the microstructure of the Al5083 alloy. Trace amounts of Sc addition drastically improve the mechanical properties of the Al5083 alloy from 216 MPa to 233 MPa. Macroscopically, the ad...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
12 Citations
4,167 Views
10 Pages

13 March 2022

Cu-0.4Cr (wt.%) alloys with the microalloying of Hf elements were subjected to a modified rolling–aging process to achieve high strength, high electrical conductivity and high ductility simultaneously. Transmission electron microscopy and X-ray...

(This article belongs to the Topic Processing, Analysis, Modelling and Mechanics of Materials and Structures)
  • Article
  • Open Access
48 Citations
6,326 Views
14 Pages

Determination of Non-Recrystallization Temperature for Niobium Microalloyed Steel

  • Mohammad Nishat Akhtar,
  • Muneer Khan,
  • Sher Afghan Khan,
  • Asif Afzal and ,
  • Ram Subbiah,
  • Sheikh Nazir Ahmad,
  • Murtuja Husain,
  • Mohammad Mursaleen Butt,
  • Abdul Rahim Othman and
  • Elmi Abu Bakar
  • + 5 authors+ 0 author

18 May 2021

In the present investigation, the non-recrystallization temperature (TNR) of niobium-microalloyed steel is determined to plan rolling schedules for obtaining the desired properties of steel. The value of TNR is based on both alloying elements and def...

(This article belongs to the Special Issue Functional Materials, Machine Learning, and Optimization)
  • Review
  • Open Access
137 Citations
22,528 Views
49 Pages

Microalloyed Steels through History until 2018: Review of Chemical Composition, Processing and Hydrogen Service

  • Julio C. Villalobos,
  • Adrian Del-Pozo,
  • Bernardo Campillo,
  • Jan Mayen and
  • Sergio Serna

14 May 2018

Microalloyed steels have evolved in terms of their chemical composition, processing, and metallurgical characteristics since the beginning of the 20th century in the function of fabrication costs and mechanical properties required to obtain high-perf...

(This article belongs to the Special Issue Advances in Microalloyed Steels)
  • Article
  • Open Access
2 Citations
860 Views
13 Pages

Effect of Fe/Ni Microalloying on Interface Regulation of SiC/Al Composites: Molecular Dynamics Simulation and Experiments

  • Tianpeng Song,
  • Xiaoshuang Du,
  • Tao Xia,
  • Yong Liu and ,
  • Jingchuan Zhu and
  • Xuexi Zhang
  • + 1 author+ 0 author

9 January 2026

SiC/Al matrix composites are prone to forming brittle Al4C3 phase via interfacial reactions during fabrication, which severely limits their mechanical properties and engineering applications. Microalloying is an effective method to inhibit this britt...

(This article belongs to the Special Issue Research on Performance Improvement of Advanced Alloys (2nd Edition))
  • Article
  • Open Access
6 Citations
2,373 Views
13 Pages

In Situ Preparation of Nano-Cu/Microalloyed Gradient Coating with Improved Antifriction Properties

  • Jinquan Sun,
  • Dongrui Wang,
  • Jie Yang,
  • Fujie Li and ,
  • Lingli Zuo,
  • Feng Ge and
  • Yunbo Chen
  • + 2 authors+ 0 author

14 September 2022

In order to solve the failure problem between the crankshaft and the connecting rod friction pair, nano-Cu/microalloyed gradient coating was prepared on the surface of the crankshaft by in situ gaseous nitriding process. Electron probe analysis confi...

(This article belongs to the Special Issue Multifunctional Coatings and Lubrication)
  • Article
  • Open Access
5 Citations
2,623 Views
10 Pages

Stabilization Effect of Interfacial Solute Segregation on θ′ Precipitates in Al-Cu Alloys

  • Shangshang Liang,
  • Shengping Wen,
  • Baosheng Liu,
  • Yong Hu and ,
  • Wu Wei,
  • Xiaolan Wu,
  • Hui Huang,
  • Kunyuan Gao,
  • Xiangyuan Xiong and
  • Zuoren Nie
  • + 5 authors+ 0 author

24 July 2024

The effects of Sc, Mg and Si elements in an Al-Cu alloy have been studied by means of hardness tests and transmission electron microscopy analysis. The experimental results show that additions of Sc, Mg and Si can improve the heat resistance of the A...

(This article belongs to the Topic Microstructure and Properties in Metals and Alloys, 3rd Volume)
  • Article
  • Open Access
294 Views
23 Pages

Influence of α-Al(Mn,Fe)Si Dispersoids and Microalloying on the Localized Corrosion Behavior of Aluminum Alloys

  • Suting Li,
  • Jikang Zhong,
  • Rui Wang,
  • Dongtao Wang and ,
  • Xiaozu Zhang,
  • Minghe Zhang and
  • Hiromi Nagaumi
  • + 2 authors+ 0 author

4 October 2026

Microstructural heterogeneity plays an important role in the localized corrosion behavior of aluminum alloys. However, the contribution of fine α-Al(Mn,Fe)Si dispersoids remains insufficiently understood. This study investigates how dispersoid...

(This article belongs to the Special Issue Corrosion Behavior of Alloys in Water Environments)
  • Article
  • Open Access
12 Citations
5,357 Views
15 Pages

Development of a Dezincification-Free Alloy System for the Manufacturing of Brass Instruments

  • Susanne Berndorf,
  • Anatol Markelov,
  • Sergey Guk,
  • Marcel Mandel and ,
  • Lutz Krüger and
  • Ulrich Prahl
  • + 1 author+ 0 author

9 July 2024

Conventionally used brass alloy CuZn30 shows problems with corrosion resistance in the form of dezincification when used in brass instruments. Therefore, within the scope of this investigation, a new brass alloy CuZn30 is developed in the microalloy...

  • Article
  • Open Access
42 Citations
7,310 Views
22 Pages

Tracing Microalloy Precipitation in Nb-Ti HSLA Steel during Austenite Conditioning

  • Johannes Webel,
  • Adrian Herges,
  • Dominik Britz,
  • Eric Detemple and ,
  • Volker Flaxa,
  • Hardy Mohrbacher and
  • Frank Mücklich
  • + 2 authors+ 0 author

12 February 2020

The microalloying with niobium (Nb) and titanium (Ti) is standardly applied in low carbon steel high-strength low-alloy (HSLA) steels and enables austenite conditioning during thermo-mechanical controlled processing (TMCP), which results in pronounce...

(This article belongs to the Special Issue Thermomechanical Processing of Steels)
  • Feature Paper
  • Article
  • Open Access
10 Citations
4,002 Views
17 Pages

27 September 2019

Heavy gauge line pipe and structural steel plate materials are often rolled in the two-phase region for strength reasons. However, strength and toughness show opposite trends, and the exact effect of each rolling process parameter remains unclear. Ev...

(This article belongs to the Special Issue Thermomechanical Processing of Steels)
  • Article
  • Open Access
14 Citations
3,102 Views
13 Pages

Effect of Austempering on Mechanical Properties of Nb/V Microalloyed Bainitic Bearing Steel

  • Yanhui Wang,
  • Baisong Liu,
  • Qiang Pan,
  • Jing Zhao and ,
  • Xiaojia Zhao,
  • Huaqiang Sun,
  • Dong Xu and
  • Zhinan Yang
  • + 3 authors+ 0 author

19 July 2022

In this study, a multi-element microalloyed GCr15Si1MoNbV bainitic bearing steel was designed by adding trace amounts of Nb and V. The bainite/martensite/retained austenite/undissolved carbide multiphase bearing steel with a short heat-treated cycle...

(This article belongs to the Special Issue Advances in High Strength Steels)
  • Article
  • Open Access
7 Citations
2,490 Views
15 Pages

Effect of Carbonitride Precipitates on the Corrosion Resistance of Low-Alloy Steels under Operating Conditions of Oil-Field Pipelines

  • Irina Rodionova,
  • Andrey Amezhnov,
  • Ekaterina Alekseeva,
  • Yuliya Gladchenkova and
  • Irina Vasechkina

7 May 2021

An investigation into the corrosion resistance of steels with various contents of carbon and microalloying elements was carried out. It was shown that the presence of a large amount of nanosized (2–3 nm and less) precipitates of the interphase type,...

(This article belongs to the Special Issue Corrosion and Protection of Metals and Alloys and Electrochemical Evaluation)
  • Article
  • Open Access
3 Citations
2,630 Views
18 Pages

Revealing the Corrosion Resistance Mechanism of Plain Carbon Steel Micro-Alloyed by La in Simulated Industrial Atmosphere

  • Sha Sha,
  • Feng Yang,
  • Jianzhong He,
  • Zhi Liu and ,
  • Tianle Fu,
  • Bing Wang,
  • Xiaoping Chen,
  • Shujun Jia and
  • Qingyou Liu
  • + 4 authors+ 0 author

11 September 2024

Plain carbon steel is the most widely applied steel in current engineering construction. With the increased application property needs, the service life of plain carbon steel has been severely tested. As one of the most destructive failure modes, cor...

(This article belongs to the Section Corrosion)
  • Article
  • Open Access
3 Citations
2,094 Views
21 Pages

28 March 2026

Microstructural and morphological effects of cobalt (Co), nickel (Ni), and cerium (Ce) microalloying on the SAC305 lead-free solder alloy were investigated, with emphasis on the solidification behavior under slow cooling conditions. Although the indi...

(This article belongs to the Special Issue Novel Insights into Welding and Joining Technologies of Metallic Materials)
  • Article
  • Open Access
16 Citations
4,287 Views
15 Pages

Effect of Ti(C, N) Particle on the Impact Toughness of B-Microalloyed Steel

  • Yu Huang,
  • Guo-Guang Cheng,
  • Shi-Jian Li,
  • Wei-Xing Dai and
  • You Xie

24 October 2018

Simultaneously improving the toughness and strength of B-microalloyed steel by adding microalloying elements (Nb, V, Ti) has been an extensively usedmethod for researchers. However, coarse Ti(C, N) particle will precipitate during solidification with...

  • Article
  • Open Access
22 Citations
3,414 Views
14 Pages

12 February 2020

Martensitic stainless steel (MSS) coatings with different vanadium (V) contents (0–1.0 wt%) by microalloying have been successfully fabricated utilizing a unique laser cladding technique. The microstructure and properties of the resulting MSS c...

of 4